diff mbox series

[4.19,5/6] ARM: 8788/1: ftrace: remove old mcount support

Message ID 20211217144119.2538175-6-anders.roxell@linaro.org
State Superseded
Headers show
Series fix warning and errors on arm built with clang | expand

Commit Message

Anders Roxell Dec. 17, 2021, 2:41 p.m. UTC
From: Stefan Agner <stefan@agner.ch>

commit d3c61619568c88d48eccd5e74b4f84faa1440652 upstream.

Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6")
raised the minimum GCC version to 4.6. Old mcount is only required for
GCC versions older than 4.4.0. Hence old mcount support can be dropped
too.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
---
 arch/arm/Kconfig.debug         |  5 ---
 arch/arm/include/asm/ftrace.h  |  3 --
 arch/arm/kernel/armksyms.c     |  3 --
 arch/arm/kernel/entry-ftrace.S | 75 ++--------------------------------
 arch/arm/kernel/ftrace.c       | 51 -----------------------
 5 files changed, 4 insertions(+), 133 deletions(-)

Comments

Greg KH Dec. 20, 2021, 10:57 a.m. UTC | #1
On Fri, Dec 17, 2021 at 03:41:18PM +0100, Anders Roxell wrote:
> From: Stefan Agner <stefan@agner.ch>
> 
> commit d3c61619568c88d48eccd5e74b4f84faa1440652 upstream.
> 
> Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6")
> raised the minimum GCC version to 4.6. Old mcount is only required for
> GCC versions older than 4.4.0. Hence old mcount support can be dropped
> too.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> Signed-off-by: Anders Roxell <anders.roxell@linaro.org>

Why is this needed for clang builds in 4.19?
diff mbox series

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 01c760929c9e..9d363399cb35 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -82,11 +82,6 @@  config ARM_UNWIND
 config FRAME_POINTER
 	bool
 
-config OLD_MCOUNT
-	bool
-	depends on FUNCTION_TRACER && FRAME_POINTER
-	default y
-
 config DEBUG_USER
 	bool "Verbose user fault messages"
 	help
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index faeb6b1c0089..15bd9af13497 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -16,9 +16,6 @@  extern void __gnu_mcount_nc(void);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 struct dyn_arch_ftrace {
-#ifdef CONFIG_OLD_MCOUNT
-	bool	old_mcount;
-#endif
 #ifdef CONFIG_ARM_MODULE_PLTS
 	struct module *mod;
 #endif
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 783fbb4de5f9..8fa2dc21d332 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -167,9 +167,6 @@  EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
 #ifdef CONFIG_FUNCTION_TRACER
-#ifdef CONFIG_OLD_MCOUNT
-EXPORT_SYMBOL(mcount);
-#endif
 EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
 
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index efcd9f25a14b..0be69e551a64 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -15,23 +15,8 @@ 
  * start of every function.  In mcount, apart from the function's address (in
  * lr), we need to get hold of the function's caller's address.
  *
- * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this:
- *
- *	bl	mcount
- *
- * These versions have the limitation that in order for the mcount routine to
- * be able to determine the function's caller's address, an APCS-style frame
- * pointer (which is set up with something like the code below) is required.
- *
- *	mov     ip, sp
- *	push    {fp, ip, lr, pc}
- *	sub     fp, ip, #4
- *
- * With EABI, these frame pointers are not available unless -mapcs-frame is
- * specified, and if building as Thumb-2, not even then.
- *
- * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount,
- * with call sites like:
+ * Newer GCCs (4.4+) solve this problem by using a version of mcount with call
+ * sites like:
  *
  *	push	{lr}
  *	bl	__gnu_mcount_nc
@@ -46,17 +31,10 @@ 
  * allows it to be clobbered in subroutines and doesn't use it to hold
  * parameters.)
  *
- * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
- * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
- * arch/arm/kernel/ftrace.c).
+ * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
+ * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
  */
 
-#ifndef CONFIG_OLD_MCOUNT
-#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
-#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
-#endif
-#endif
-
 .macro mcount_adjust_addr rd, rn
 	bic	\rd, \rn, #1		@ clear the Thumb bit if present
 	sub	\rd, \rd, #MCOUNT_INSN_SIZE
@@ -209,51 +187,6 @@  ftrace_graph_call\suffix:
 	mcount_exit
 .endm
 
-#ifdef CONFIG_OLD_MCOUNT
-/*
- * mcount
- */
-
-.macro mcount_enter
-	stmdb	sp!, {r0-r3, lr}
-.endm
-
-.macro mcount_get_lr reg
-	ldr	\reg, [fp, #-4]
-.endm
-
-.macro mcount_exit
-	ldr	lr, [fp, #-4]
-	ldmia	sp!, {r0-r3, pc}
-.endm
-
-ENTRY(mcount)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	stmdb	sp!, {lr}
-	ldr	lr, [fp, #-4]
-	ldmia	sp!, {pc}
-#else
-	__mcount _old
-#endif
-ENDPROC(mcount)
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(ftrace_caller_old)
-	__ftrace_caller _old
-ENDPROC(ftrace_caller_old)
-#endif
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller_old)
-	__ftrace_graph_caller
-ENDPROC(ftrace_graph_caller_old)
-#endif
-
-.purgem mcount_enter
-.purgem mcount_get_lr
-.purgem mcount_exit
-#endif
-
 /*
  * __gnu_mcount_nc
  */
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 51839250e49a..12b6da56f88d 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -47,30 +47,6 @@  void arch_ftrace_update_code(int command)
 	stop_machine(__ftrace_modify_code, &command, NULL);
 }
 
-#ifdef CONFIG_OLD_MCOUNT
-#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
-#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
-
-#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
-
-static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
-{
-	return rec->arch.old_mcount ? OLD_NOP : NOP;
-}
-
-static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
-{
-	if (!rec->arch.old_mcount)
-		return addr;
-
-	if (addr == MCOUNT_ADDR)
-		addr = OLD_MCOUNT_ADDR;
-	else if (addr == FTRACE_ADDR)
-		addr = OLD_FTRACE_ADDR;
-
-	return addr;
-}
-#else
 static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 {
 	return NOP;
@@ -80,7 +56,6 @@  static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
 {
 	return addr;
 }
-#endif
 
 int ftrace_arch_code_modify_prepare(void)
 {
@@ -151,15 +126,6 @@  int ftrace_update_ftrace_func(ftrace_func_t func)
 	}
 #endif
 
-#ifdef CONFIG_OLD_MCOUNT
-	if (!ret) {
-		pc = (unsigned long)&ftrace_call_old;
-		new = ftrace_call_replace(pc, (unsigned long)func, true);
-
-		ret = ftrace_modify_code(pc, 0, new, false);
-	}
-#endif
-
 	return ret;
 }
 
@@ -233,16 +199,6 @@  int ftrace_make_nop(struct module *mod,
 	new = ftrace_nop_replace(rec);
 	ret = ftrace_modify_code(ip, old, new, true);
 
-#ifdef CONFIG_OLD_MCOUNT
-	if (ret == -EINVAL && addr == MCOUNT_ADDR) {
-		rec->arch.old_mcount = true;
-
-		old = ftrace_call_replace(ip, adjust_address(rec, addr), true);
-		new = ftrace_nop_replace(rec);
-		ret = ftrace_modify_code(ip, old, new, true);
-	}
-#endif
-
 	return ret;
 }
 
@@ -305,13 +261,6 @@  static int ftrace_modify_graph_caller(bool enable)
 #endif
 
 
-#ifdef CONFIG_OLD_MCOUNT
-	if (!ret)
-		ret = __ftrace_modify_caller(&ftrace_graph_call_old,
-					     ftrace_graph_caller_old,
-					     enable);
-#endif
-
 	return ret;
 }