diff mbox series

[v2,21/35] brcmfmac: chip: Only disable D11 cores; handle an arbitrary number

Message ID 20220104072658.69756-22-marcan@marcan.st
State Accepted
Commit 3c7c07ca7ab144ef25402858078b27806322b752
Headers show
Series brcmfmac: Support Apple T2 and M1 platforms | expand

Commit Message

Hector Martin Jan. 4, 2022, 7:26 a.m. UTC
At least on BCM4387, the D11 cores are held in reset on cold startup and
firmware expects to release reset itself. Just assert reset here and let
firmware deassert it. Premature deassertion results in the firmware
failing to initialize properly some of the time, with strange AXI bus
errors.

Also, BCM4387 has 3 cores, up from 2. The logic for handling that is in
brcmf_chip_ai_resetcore(), but since we aren't using that any more, just
handle it here.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

Comments

Arend van Spriel Jan. 19, 2022, 12:36 p.m. UTC | #1
On 1/4/2022 8:26 AM, Hector Martin wrote:
> At least on BCM4387, the D11 cores are held in reset on cold startup and
> firmware expects to release reset itself. Just assert reset here and let
> firmware deassert it. Premature deassertion results in the firmware
> failing to initialize properly some of the time, with strange AXI bus
> errors.
> 
> Also, BCM4387 has 3 cores, up from 2. The logic for handling that is in
> brcmf_chip_ai_resetcore(), but since we aren't using that any more, just
> handle it here.

Makes sense.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
>   .../net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 13 ++++++++-----
>   1 file changed, 8 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index 73ab96968ac6..713546cebd5a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -1289,15 +1289,18 @@  static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip)
 static inline void
 brcmf_chip_cr4_set_passive(struct brcmf_chip_priv *chip)
 {
+	int i;
 	struct brcmf_core *core;
 
 	brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4);
 
-	core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211);
-	brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET |
-				   D11_BCMA_IOCTL_PHYCLOCKEN,
-			     D11_BCMA_IOCTL_PHYCLOCKEN,
-			     D11_BCMA_IOCTL_PHYCLOCKEN);
+	/* Disable the cores only and let the firmware enable them.
+	 * Releasing reset ourselves breaks BCM4387 in weird ways.
+	 */
+	for (i = 0; (core = brcmf_chip_get_d11core(&chip->pub, i)); i++)
+		brcmf_chip_coredisable(core, D11_BCMA_IOCTL_PHYRESET |
+				       D11_BCMA_IOCTL_PHYCLOCKEN,
+				       D11_BCMA_IOCTL_PHYCLOCKEN);
 }
 
 static bool brcmf_chip_cr4_set_active(struct brcmf_chip_priv *chip, u32 rstvec)