diff mbox series

[v2,01/35] dt-bindings: net: bcm4329-fmac: Add Apple properties & chips

Message ID 20220104072658.69756-2-marcan@marcan.st
State Accepted
Commit e2e37224e8b3a5194e4fc4797ef7309a78841673
Headers show
Series brcmfmac: Support Apple T2 and M1 platforms | expand

Commit Message

Hector Martin Jan. 4, 2022, 7:26 a.m. UTC
This binding is currently used for SDIO devices, but these chips are
also used as PCIe devices on DT platforms and may be represented in the
DT. Re-use the existing binding and add chip compatibles used by Apple
T2 and M1 platforms (the T2 ones are not known to be used in DT
platforms, but we might as well document them).

Then, add properties required for firmware selection and calibration on
M1 machines.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
---
 .../net/wireless/brcm,bcm4329-fmac.yaml       | 37 +++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)

Comments

Rob Herring Jan. 11, 2022, 6:45 p.m. UTC | #1
On Tue, 04 Jan 2022 16:26:24 +0900, Hector Martin wrote:
> This binding is currently used for SDIO devices, but these chips are
> also used as PCIe devices on DT platforms and may be represented in the
> DT. Re-use the existing binding and add chip compatibles used by Apple
> T2 and M1 platforms (the T2 ones are not known to be used in DT
> platforms, but we might as well document them).
> 
> Then, add properties required for firmware selection and calibration on
> M1 machines.
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
>  .../net/wireless/brcm,bcm4329-fmac.yaml       | 37 +++++++++++++++++--
>  1 file changed, 34 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index c11f23b20c4c..8b4147c64355 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -4,7 +4,7 @@ 
 $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM4329 family fullmac wireless SDIO devices
+title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
 
 maintainers:
   - Arend van Spriel <arend@broadcom.com>
@@ -42,10 +42,16 @@  properties:
               - cypress,cyw43012-fmac
           - const: brcm,bcm4329-fmac
       - const: brcm,bcm4329-fmac
+      - enum:
+          - pci14e4,43dc  # BCM4355
+          - pci14e4,4464  # BCM4364
+          - pci14e4,4488  # BCM4377
+          - pci14e4,4425  # BCM4378
+          - pci14e4,4433  # BCM4387
 
   reg:
-    description: SDIO function number for the device, for most cases
-      this will be 1.
+    description: SDIO function number for the device (for most cases
+      this will be 1) or PCI device identifier.
 
   interrupts:
     maxItems: 1
@@ -75,6 +81,31 @@  properties:
     items:
       pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
 
+  brcm,cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Wi-Fi radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device if present.
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Overrides the board type, which is normally the compatible of
+      the root node. This can be used to decouple the overall system board or
+      device name from the board type for WiFi purposes, which is used to
+      construct firmware and NVRAM configuration filenames, allowing for
+      multiple devices that share the same module or characteristics for the
+      WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms,
+      this should be the Apple module-instance codename prefixed by "apple,",
+      e.g. "apple,honshu".
+
+  apple,antenna-sku:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Antenna SKU used to identify a specific antenna configuration
+      on Apple platforms. This is use to build firmware filenames, to allow
+      platforms with different antenna configs to have different firmware and/or
+      NVRAM. This would normally be filled in by the bootloader from platform
+      configuration data.
+
 required:
   - compatible
   - reg