diff mbox series

[13/15] arm64: dts: qcom: Add MSM8953+PM8953 device tree

Message ID 20220112194118.178026-14-luca@z3ntu.xyz
State New
Headers show
Series Initial MSM8953 & Fairphone 3 support | expand

Commit Message

Luca Weiss Jan. 12, 2022, 7:41 p.m. UTC
From: Vladimir Lypak <vladimir.lypak@gmail.com>

The combination MSM8953 + PM8953 is commonly used, so add a
device tree where common power supplies etc. can be configured.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi | 50 ++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi

Comments

Bjorn Andersson Jan. 31, 2022, 10:39 p.m. UTC | #1
On Wed 12 Jan 13:41 CST 2022, Luca Weiss wrote:

> From: Vladimir Lypak <vladimir.lypak@gmail.com>
> 
> The combination MSM8953 + PM8953 is commonly used, so add a
> device tree where common power supplies etc. can be configured.
> 
> Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

I would prefer if we stick with the current scheme and just push this
into the device dts (or possibly some vendor-common dtsi if that's
applicable).

Simply just to follow what we do on other platforms.


PS. I see some patches has been applied, but as you resubmit this
series please split it per maintainer to make it obvious to each
maintainer that they should pick their part(s).

Thanks,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi | 50 ++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
> new file mode 100644
> index 000000000000..b5f20fc9488e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
> @@ -0,0 +1,50 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
> +
> +#include "msm8953.dtsi"
> +#include "pm8953.dtsi"
> +
> +&hsusb_phy {
> +	vdd-supply = <&pm8953_l3>;
> +	vdda-pll-supply = <&pm8953_l7>;
> +	vdda-phy-dpdm-supply = <&pm8953_l13>;
> +};
> +
> +&sdhc_1 {
> +	vmmc-supply = <&pm8953_l8>;
> +	vqmmc-supply = <&pm8953_l5>;
> +};
> +
> +&sdhc_2 {
> +	vmmc-supply = <&pm8953_l11>;
> +	vqmmc-supply = <&pm8953_l12>;
> +};
> +
> +&rpm_requests {
> +	smd_rpm_regulators: pm8953-regulators {
> +		compatible = "qcom,rpm-pm8953-regulators";
> +
> +		pm8953_s1: s1 {};
> +		pm8953_s3: s3 {};
> +		pm8953_s4: s4 {};
> +
> +		pm8953_l1: l1 {};
> +		pm8953_l2: l2 {};
> +		pm8953_l3: l3 {};
> +		pm8953_l5: l5 {};
> +		pm8953_l6: l6 {};
> +		pm8953_l7: l7 {};
> +		pm8953_l8: l8 {};
> +		pm8953_l9: l9 {};
> +		pm8953_l10: l10 {};
> +		pm8953_l11: l11 {};
> +		pm8953_l12: l12 {};
> +		pm8953_l13: l13 {};
> +		pm8953_l15: l15 {};
> +		pm8953_l16: l16 {};
> +		pm8953_l17: l17 {};
> +		pm8953_l19: l19 {};
> +		pm8953_l22: l22 {};
> +		pm8953_l23: l23 {};
> +	};
> +};
> -- 
> 2.34.1
>
Luca Weiss Feb. 13, 2022, 8:25 p.m. UTC | #2
Hi Bjorn,

On Montag, 31. Jänner 2022 23:39:06 CET Bjorn Andersson wrote:
> On Wed 12 Jan 13:41 CST 2022, Luca Weiss wrote:
> > From: Vladimir Lypak <vladimir.lypak@gmail.com>
> > 
> > The combination MSM8953 + PM8953 is commonly used, so add a
> > device tree where common power supplies etc. can be configured.
> > 
> > Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> 
> I would prefer if we stick with the current scheme and just push this
> into the device dts (or possibly some vendor-common dtsi if that's
> applicable).
> 
> Simply just to follow what we do on other platforms.

Sure, will do in v2.

> 
> 
> PS. I see some patches has been applied, but as you resubmit this
> series please split it per maintainer to make it obvious to each
> maintainer that they should pick their part(s).

What do you mean by this? Send one series per maintainer? Or something else? 

Currently when making the patches I don't really "care" about who maintains 
what, my git send-email setup picks the relevant people for CC.

Sometimes there's also multiple maintainers/trees listed for one file, not sure 
what to do there... 

Regards
Luca

> 
> Thanks,
> Bjorn
> 
> > ---
> > 
> >  arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi | 50 ++++++++++++++++++++
> >  1 file changed, 50 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
> > b/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi new file mode 100644
> > index 000000000000..b5f20fc9488e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
> > @@ -0,0 +1,50 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
> > +
> > +#include "msm8953.dtsi"
> > +#include "pm8953.dtsi"
> > +
> > +&hsusb_phy {
> > +	vdd-supply = <&pm8953_l3>;
> > +	vdda-pll-supply = <&pm8953_l7>;
> > +	vdda-phy-dpdm-supply = <&pm8953_l13>;
> > +};
> > +
> > +&sdhc_1 {
> > +	vmmc-supply = <&pm8953_l8>;
> > +	vqmmc-supply = <&pm8953_l5>;
> > +};
> > +
> > +&sdhc_2 {
> > +	vmmc-supply = <&pm8953_l11>;
> > +	vqmmc-supply = <&pm8953_l12>;
> > +};
> > +
> > +&rpm_requests {
> > +	smd_rpm_regulators: pm8953-regulators {
> > +		compatible = "qcom,rpm-pm8953-regulators";
> > +
> > +		pm8953_s1: s1 {};
> > +		pm8953_s3: s3 {};
> > +		pm8953_s4: s4 {};
> > +
> > +		pm8953_l1: l1 {};
> > +		pm8953_l2: l2 {};
> > +		pm8953_l3: l3 {};
> > +		pm8953_l5: l5 {};
> > +		pm8953_l6: l6 {};
> > +		pm8953_l7: l7 {};
> > +		pm8953_l8: l8 {};
> > +		pm8953_l9: l9 {};
> > +		pm8953_l10: l10 {};
> > +		pm8953_l11: l11 {};
> > +		pm8953_l12: l12 {};
> > +		pm8953_l13: l13 {};
> > +		pm8953_l15: l15 {};
> > +		pm8953_l16: l16 {};
> > +		pm8953_l17: l17 {};
> > +		pm8953_l19: l19 {};
> > +		pm8953_l22: l22 {};
> > +		pm8953_l23: l23 {};
> > +	};
> > +};
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
new file mode 100644
index 000000000000..b5f20fc9488e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-pm8953.dtsi
@@ -0,0 +1,50 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+};
+
+&rpm_requests {
+	smd_rpm_regulators: pm8953-regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		pm8953_s1: s1 {};
+		pm8953_s3: s3 {};
+		pm8953_s4: s4 {};
+
+		pm8953_l1: l1 {};
+		pm8953_l2: l2 {};
+		pm8953_l3: l3 {};
+		pm8953_l5: l5 {};
+		pm8953_l6: l6 {};
+		pm8953_l7: l7 {};
+		pm8953_l8: l8 {};
+		pm8953_l9: l9 {};
+		pm8953_l10: l10 {};
+		pm8953_l11: l11 {};
+		pm8953_l12: l12 {};
+		pm8953_l13: l13 {};
+		pm8953_l15: l15 {};
+		pm8953_l16: l16 {};
+		pm8953_l17: l17 {};
+		pm8953_l19: l19 {};
+		pm8953_l22: l22 {};
+		pm8953_l23: l23 {};
+	};
+};