diff mbox

[1/2] arm64: dts: qcom: 8x16: Add UART1 configuration nodes

Message ID 1442062995-13523-1-git-send-email-ivan.ivanov@linaro.org
State New
Headers show

Commit Message

Ivan T. Ivanov Sept. 12, 2015, 1:03 p.m. UTC 
Add devicetree bindings for UART1 pins and device
controller with DMA channel specifiers.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 29 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi      | 12 ++++++++++++
 2 files changed, 41 insertions(+)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 568956859088..1330a7a6bcf1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -13,6 +13,35 @@ 

 &msmgpio {

+	blsp1_uart1_default: blsp1_uart1_default {
+		pinmux {
+			function = "blsp_uart1";
+			//	TX, RX, CTS_N, RTS_N
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart1_sleep: blsp1_uart1_sleep {
+		pinmux {
+			function = "blsp_uart1";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
 	blsp1_uart2_default: blsp1_uart2_default {
 		pinmux {
 			function = "blsp_uart2";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5911de008dd5..f10ff7a2d0e3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -102,6 +102,18 @@ 
 			reg = <0x1800000 0x80000>;
 		};

+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;