diff mbox series

[v3,7/8] memory: of: parse max-freq property

Message ID 20220206135807.211767-8-krzysztof.kozlowski@canonical.com
State Accepted
Commit 4e890b2228fd14fa6269175e9816bf27ff989e84
Headers show
Series [v3,1/8] dt-bindings: memory: lpddr2-timings: convert to dtschema | expand

Commit Message

Krzysztof Kozlowski Feb. 6, 2022, 1:58 p.m. UTC
Passing the memory timings maximum frequency as an unit address was
a workaround and instead 'max-freq' is preferred.  Look for 'max-freq'
first and then fallback to 'reg'.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
 drivers/memory/of_memory.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
index b94408954d85..bac5c7f34936 100644
--- a/drivers/memory/of_memory.c
+++ b/drivers/memory/of_memory.c
@@ -212,8 +212,10 @@  static int of_lpddr3_do_get_timings(struct device_node *np,
 {
 	int ret;
 
-	/* The 'reg' param required since DT has changed, used as 'max-freq' */
-	ret = of_property_read_u32(np, "reg", &tim->max_freq);
+	ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
+	if (ret)
+		/* Deprecated way of passing max-freq as 'reg' */
+		ret = of_property_read_u32(np, "reg", &tim->max_freq);
 	ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
 	ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
 	ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);