diff mbox series

[1/2] arm64: dts: qcom: c630: Add backlight controller

Message ID 20220208041606.144039-1-bjorn.andersson@linaro.org
State Accepted
Commit a28106a2734f602d852a9269526f5880df352b51
Headers show
Series [1/2] arm64: dts: qcom: c630: Add backlight controller | expand

Commit Message

Bjorn Andersson Feb. 8, 2022, 4:16 a.m. UTC
The Lenovo Yoga C630 uses the PWM controller in the TI SN65DSI86 bridge
chip to provide a signal for the backlight control and has TLMM GPIO 11
attached to some regulator that drives the backlight.

Unfortunately the regulator attached to this gpio is also powering the
camera, so turning off backlight result in the detachment of the camera
as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

patchwork-bot+linux-arm-msm@kernel.org Feb. 11, 2022, 5:10 p.m. UTC | #1
Hello:

This series was applied to qcom/linux.git (for-next)
by Bjorn Andersson <bjorn.andersson@linaro.org>:

On Mon,  7 Feb 2022 22:16:05 -0600 you wrote:
> The Lenovo Yoga C630 uses the PWM controller in the TI SN65DSI86 bridge
> chip to provide a signal for the backlight control and has TLMM GPIO 11
> attached to some regulator that drives the backlight.
> 
> Unfortunately the regulator attached to this gpio is also powering the
> camera, so turning off backlight result in the detachment of the camera
> as well.
> 
> [...]

Here is the summary with links:
  - [1/2] arm64: dts: qcom: c630: Add backlight controller
    https://git.kernel.org/qcom/c/a28106a2734f
  - [2/2] arm64: dts: qcom: c630: Move panel to aux-bus
    https://git.kernel.org/qcom/c/ff899133fdae

You are awesome, thank you!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 58845a14805f..55fb7302245b 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -59,6 +59,7 @@  mode {
 	panel {
 		compatible = "boe,nv133fhm-n61";
 		no-hpd;
+		backlight = <&backlight>;
 
 		ports {
 			port {
@@ -98,6 +99,12 @@  sn65dsi86_refclk: sn65dsi86-refclk {
 
 		clock-frequency = <19200000>;
 	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&sn65dsi86 1000000>;
+		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &adsp_pas {
@@ -419,6 +426,7 @@  sn65dsi86: bridge@2c {
 		clock-names = "refclk";
 
 		no-hpd;
+		#pwm-cells = <1>;
 
 		ports {
 			#address-cells = <1>;