diff mbox series

[v5,9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+

Message ID 20220209172717.178813-10-terry.bowman@amd.com
State Accepted
Commit 6cf72f41808ab5db1d7718b999b3ff0166e67e45
Headers show
Series i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses | expand

Commit Message

Terry Bowman Feb. 9, 2022, 5:27 p.m. UTC
Enable EFCH MMIO using check for SMBus PCI revision ID value 0x51 or
greater. This PCI revision ID check will enable family 17h and future
AMD processors with the same EFCH SMBus controller HW.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
---
 drivers/i2c/busses/i2c-piix4.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 4789fc9ad270..ac8e7d60672a 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -229,6 +229,18 @@  static void piix4_sb800_region_release(struct device *dev,
 	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
 }
 
+static bool piix4_sb800_use_mmio(struct pci_dev *PIIX4_dev)
+{
+	/*
+	 * cd6h/cd7h port I/O accesses can be disabled on AMD processors
+	 * w/ SMBus PCI revision ID 0x51 or greater. MMIO is supported on
+	 * the same processors and is the recommended access method.
+	 */
+	return (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+		PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+		PIIX4_dev->revision >= 0x51);
+}
+
 static int piix4_setup(struct pci_dev *PIIX4_dev,
 		       const struct pci_device_id *id)
 {
@@ -339,7 +351,7 @@  static int piix4_setup_sb800_smba(struct pci_dev *PIIX4_dev,
 	u8 smba_en_hi;
 	int retval;
 
-	mmio_cfg.use_mmio = 0;
+	mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev);
 	retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
 	if (retval)
 		return retval;
@@ -461,7 +473,7 @@  static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
 		}
 	} else {
-		mmio_cfg.use_mmio = 0;
+		mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev);
 		retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
 		if (retval) {
 			release_region(piix4_smba, SMBIOSIZE);
@@ -944,6 +956,7 @@  static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 		return -ENOMEM;
 	}
 
+	adapdata->mmio_cfg.use_mmio = piix4_sb800_use_mmio(dev);
 	adapdata->smba = smba;
 	adapdata->sb800_main = sb800_main;
 	adapdata->port = port << piix4_port_shift_sb800;