diff mbox series

[1/2] staging: wfx: allow new PDS format

Message ID 20220211162659.528333-2-Jerome.Pouiller@silabs.com
State New
Headers show
Series staging/wfx: change config files format | expand

Commit Message

Jérôme Pouiller Feb. 11, 2022, 4:26 p.m. UTC
From: Jérôme Pouiller <jerome.pouiller@silabs.com>

The device needs data about the antenna configuration. This information
in provided by PDS (Platform Data Set, this is the wording used in WF200
documentation) files.

Until now, the driver had to parse the PDS file before to send it. This
solution was not acceptable for the vanilla kernel. We have slightly
changed the PDS format so it is now an array of Type-Length-Value.

This patch allows to support new format and keep compatibility with
legacy format.

probe: allow new PDS format
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/staging/wfx/main.c | 74 +++++++++++++++++++++++++++++---------
 1 file changed, 57 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
index 8be9100847a7..a0f5e09c3c3f 100644
--- a/drivers/staging/wfx/main.c
+++ b/drivers/staging/wfx/main.c
@@ -33,7 +33,8 @@ 
 #include "hif_tx_mib.h"
 #include "hif_api_cmd.h"
 
-#define WFX_PDS_MAX_SIZE 1500
+#define WFX_PDS_TLV_TYPE 0x4450 // "PD" (Platform Data) in ascii little-endian
+#define WFX_PDS_MAX_CHUNK_SIZE 1500
 
 MODULE_DESCRIPTION("Silicon Labs 802.11 Wireless LAN driver for WF200");
 MODULE_AUTHOR("Jérôme Pouiller <jerome.pouiller@silabs.com>");
@@ -162,29 +163,18 @@  bool wfx_api_older_than(struct wfx_dev *wdev, int major, int minor)
 	return false;
 }
 
-/* The device needs data about the antenna configuration. This information in provided by PDS
- * (Platform Data Set, this is the wording used in WF200 documentation) files. For hardware
- * integrators, the full process to create PDS files is described here:
- *   https:github.com/SiliconLabs/wfx-firmware/blob/master/PDS/README.md
- *
- * So this function aims to send PDS to the device. However, the PDS file is often bigger than Rx
- * buffers of the chip, so it has to be sent in multiple parts.
+/* In legacy format, the PDS file is often bigger than Rx buffers of the chip, so it has to be sent
+ * in multiple parts.
  *
  * In add, the PDS data cannot be split anywhere. The PDS files contains tree structures. Braces are
  * used to enter/leave a level of the tree (in a JSON fashion). PDS files can only been split
  * between root nodes.
  */
-int wfx_send_pds(struct wfx_dev *wdev, u8 *buf, size_t len)
+int wfx_send_pds_legacy(struct wfx_dev *wdev, u8 *buf, size_t len)
 {
 	int ret;
-	int start, brace_level, i;
+	int start = 0, brace_level = 0, i;
 
-	start = 0;
-	brace_level = 0;
-	if (buf[0] != '{') {
-		dev_err(wdev->dev, "valid PDS start with '{'. Did you forget to compress it?\n");
-		return -EINVAL;
-	}
 	for (i = 1; i < len - 1; i++) {
 		if (buf[i] == '{')
 			brace_level++;
@@ -192,7 +182,7 @@  int wfx_send_pds(struct wfx_dev *wdev, u8 *buf, size_t len)
 			brace_level--;
 		if (buf[i] == '}' && !brace_level) {
 			i++;
-			if (i - start + 1 > WFX_PDS_MAX_SIZE)
+			if (i - start + 1 > WFX_PDS_MAX_CHUNK_SIZE)
 				return -EFBIG;
 			buf[start] = '{';
 			buf[i] = 0;
@@ -222,6 +212,56 @@  int wfx_send_pds(struct wfx_dev *wdev, u8 *buf, size_t len)
 	return 0;
 }
 
+/* The device needs data about the antenna configuration. This information in provided by PDS
+ * (Platform Data Set, this is the wording used in WF200 documentation) files. For hardware
+ * integrators, the full process to create PDS files is described here:
+ *   https://github.com/SiliconLabs/wfx-firmware/blob/master/PDS/README.md
+ *
+ * The PDS file is an array of Time-Length-Value structs.
+ */
+ int wfx_send_pds(struct wfx_dev *wdev, u8 *buf, size_t len)
+{
+	int ret, chunk_type, chunk_len, chunk_num = 0;
+
+	if (*buf == '{')
+		return wfx_send_pds_legacy(wdev, buf, len);
+	while (len > 0) {
+		chunk_type = get_unaligned_le16(buf + 0);
+		chunk_len = get_unaligned_le16(buf + 2);
+		if (chunk_len > len) {
+			dev_err(wdev->dev, "PDS:%d: corrupted file\n", chunk_num);
+			return -EINVAL;
+		}
+		if (chunk_type != WFX_PDS_TLV_TYPE) {
+			dev_info(wdev->dev, "PDS:%d: skip unknown data\n", chunk_num);
+			goto next;
+		}
+		if (chunk_len > WFX_PDS_MAX_CHUNK_SIZE)
+			dev_warn(wdev->dev, "PDS:%d: unexpectly large chunk\n", chunk_num);
+		if (buf[4] != '{' || buf[chunk_len - 1] != '}')
+			dev_warn(wdev->dev, "PDS:%d: unexpected content\n", chunk_num);
+
+		ret = wfx_hif_configuration(wdev, buf + 4, chunk_len - 4);
+		if (ret > 0) {
+			dev_err(wdev->dev, "PDS:%d: invalid data (unsupported options?)\n", chunk_num);
+			return -EINVAL;
+		}
+		if (ret == -ETIMEDOUT) {
+			dev_err(wdev->dev, "PDS:%d: chip didn't reply (corrupted file?)\n", chunk_num);
+			return ret;
+		}
+		if (ret) {
+			dev_err(wdev->dev, "PDS:%d: chip returned an unknown error\n", chunk_num);
+			return -EIO;
+		}
+next:
+		chunk_num++;
+		len -= chunk_len;
+		buf += chunk_len;
+	}
+	return 0;
+}
+
 static int wfx_send_pdata_pds(struct wfx_dev *wdev)
 {
 	int ret = 0;