diff mbox

[6/7] hw/a9mpcore.c: Implement A9MP peripherals rather than 11MPcore ones

Message ID 1323103220-1636-7-git-send-email-peter.maydell@linaro.org
State Accepted
Headers show

Commit Message

Peter Maydell Dec. 5, 2011, 4:40 p.m. UTC
Implement the A9MP private peripheral region correctly, rather
than piggybacking on the 11MPCore code; the two CPUs are not the
same in this area.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/a9mpcore.c |  189 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 files changed, 179 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/hw/a9mpcore.c b/hw/a9mpcore.c
index 6f108f4..cd2985f 100644
--- a/hw/a9mpcore.c
+++ b/hw/a9mpcore.c
@@ -2,28 +2,197 @@ 
  * Cortex-A9MPCore internal peripheral emulation.
  *
  * Copyright (c) 2009 CodeSourcery.
- * Written by Paul Brook
+ * Copyright (c) 2011 Linaro Limited.
+ * Written by Paul Brook, Peter Maydell.
  *
  * This code is licensed under the GPL.
  */
 
-/* 64 external IRQ lines.  */
+#include "sysbus.h"
+
+/* Configuration for arm_gic.c:
+ * number of external IRQ lines, max number of CPUs, how to ID current CPU
+ */
 #define GIC_NIRQ 96
-#include "mpcore.c"
+#define NCPU 4
+
+static inline int
+gic_get_current_cpu(void)
+{
+  return cpu_single_env->cpu_index;
+}
+
+#include "arm_gic.c"
+
+/* A9MP private memory region.  */
+
+typedef struct a9mp_priv_state {
+    gic_state gic;
+    uint32_t scu_control;
+    uint32_t old_timer_status[8];
+    uint32_t num_cpu;
+    qemu_irq *timer_irq;
+    MemoryRegion scu_iomem;
+    MemoryRegion ptimer_iomem;
+    MemoryRegion container;
+    DeviceState *mptimer;
+} a9mp_priv_state;
+
+static uint64_t a9_scu_read(void *opaque, target_phys_addr_t offset,
+                            unsigned size)
+{
+    a9mp_priv_state *s = (a9mp_priv_state *)opaque;
+    switch (offset) {
+    case 0x00: /* Control */
+        return s->scu_control;
+    case 0x04: /* Configuration */
+        return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);
+    case 0x08: /* CPU Power Status */
+        return 0;
+    case 0x0c: /* Invalidate All Registers In Secure State */
+        return 0;
+    case 0x40: /* Filtering Start Address Register */
+    case 0x44: /* Filtering End Address Register */
+        /* RAZ/WI, like an implementation with only one AXI master */
+        return 0;
+    case 0x50: /* SCU Access Control Register */
+    case 0x54: /* SCU Non-secure Access Control Register */
+        /* unimplemented, fall through */
+    default:
+        return 0;
+    }
+}
+
+static void a9_scu_write(void *opaque, target_phys_addr_t offset,
+                         uint64_t value, unsigned size)
+{
+    a9mp_priv_state *s = (a9mp_priv_state *)opaque;
+    switch (offset) {
+    case 0x00: /* Control */
+        s->scu_control = value & 1;
+        break;
+    case 0x4: /* Configuration: RO */
+        break;
+    case 0x0c: /* Invalidate All Registers In Secure State */
+        /* no-op as we do not implement caches */
+        break;
+    case 0x40: /* Filtering Start Address Register */
+    case 0x44: /* Filtering End Address Register */
+        /* RAZ/WI, like an implementation with only one AXI master */
+        break;
+    case 0x8: /* CPU Power Status */
+    case 0x50: /* SCU Access Control Register */
+    case 0x54: /* SCU Non-secure Access Control Register */
+        /* unimplemented, fall through */
+    default:
+        break;
+    }
+}
+
+static const MemoryRegionOps a9_scu_ops = {
+    .read = a9_scu_read,
+    .write = a9_scu_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void a9mpcore_timer_irq_handler(void *opaque, int irq, int level)
+{
+    a9mp_priv_state *s = (a9mp_priv_state *)opaque;
+    if (level && !s->old_timer_status[irq]) {
+        gic_set_pending_private(&s->gic, irq >> 1, 29 + (irq & 1));
+    }
+    s->old_timer_status[irq] = level;
+}
+
+static void a9mp_priv_reset(DeviceState *dev)
+{
+    a9mp_priv_state *s = FROM_SYSBUSGIC(a9mp_priv_state, sysbus_from_qdev(dev));
+    int i;
+    s->scu_control = 0;
+    for (i = 0; i < ARRAY_SIZE(s->old_timer_status); i++) {
+        s->old_timer_status[i] = 0;
+    }
+}
+
+static int a9mp_priv_init(SysBusDevice *dev)
+{
+    a9mp_priv_state *s = FROM_SYSBUSGIC(a9mp_priv_state, dev);
+    SysBusDevice *busdev;
+    int i;
+
+    if (s->num_cpu > NCPU) {
+        hw_error("a9mp_priv_init: num-cpu may not be more than %d\n", NCPU);
+    }
+
+    gic_init(&s->gic, s->num_cpu);
+
+    s->mptimer = qdev_create(NULL, "arm_mptimer");
+    qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
+    qdev_init_nofail(s->mptimer);
+    busdev = sysbus_from_qdev(s->mptimer);
+
+    /* Memory map (addresses are offsets from PERIPHBASE):
+     *  0x0000-0x00ff -- Snoop Control Unit
+     *  0x0100-0x01ff -- GIC CPU interface
+     *  0x0200-0x02ff -- Global Timer
+     *  0x0300-0x05ff -- nothing
+     *  0x0600-0x06ff -- private timers and watchdogs
+     *  0x0700-0x0fff -- nothing
+     *  0x1000-0x1fff -- GIC Distributor
+     *
+     * We should implement the global timer but don't currently do so.
+     */
+    memory_region_init(&s->container, "a9mp-priv-container", 0x2000);
+    memory_region_init_io(&s->scu_iomem, &a9_scu_ops, s, "a9mp-scu", 0x100);
+    memory_region_add_subregion(&s->container, 0, &s->scu_iomem);
+    /* GIC CPU interface */
+    memory_region_add_subregion(&s->container, 0x100, &s->gic.cpuiomem[0]);
+    /* Note that the A9 exposes only the "timer/watchdog for this core"
+     * memory region, not the "timer/watchdog for core X" ones 11MPcore has.
+     */
+    memory_region_add_subregion(&s->container, 0x600,
+                                sysbus_mmio_get_region(busdev, 0));
+    memory_region_add_subregion(&s->container, 0x620,
+                                sysbus_mmio_get_region(busdev, 1));
+    memory_region_add_subregion(&s->container, 0x1000, &s->gic.iomem);
+
+    sysbus_init_mmio(dev, &s->container);
+
+    /* Wire up the interrupt from each watchdog and timer. */
+    s->timer_irq = qemu_allocate_irqs(a9mpcore_timer_irq_handler,
+                                      s, (s->num_cpu + 1) * 2);
+    for (i = 0; i < s->num_cpu * 2; i++) {
+        sysbus_connect_irq(busdev, i, s->timer_irq[i]);
+    }
+    return 0;
+}
+
+static const VMStateDescription vmstate_a9mp_priv = {
+    .name = "a9mpcore_priv",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(scu_control, a9mp_priv_state),
+        VMSTATE_UINT32_ARRAY(old_timer_status, a9mp_priv_state, 8),
+        VMSTATE_END_OF_LIST()
+    }
+};
 
-static SysBusDeviceInfo mpcore_priv_info = {
-    .init = mpcore_priv_init,
+static SysBusDeviceInfo a9mp_priv_info = {
+    .init = a9mp_priv_init,
     .qdev.name  = "a9mpcore_priv",
-    .qdev.size  = sizeof(mpcore_priv_state),
+    .qdev.size  = sizeof(a9mp_priv_state),
+    .qdev.vmsd = &vmstate_a9mp_priv,
+    .qdev.reset = a9mp_priv_reset,
     .qdev.props = (Property[]) {
-        DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
+        DEFINE_PROP_UINT32("num-cpu", a9mp_priv_state, num_cpu, 1),
         DEFINE_PROP_END_OF_LIST(),
     }
 };
 
-static void a9mpcore_register_devices(void)
+static void a9mp_register_devices(void)
 {
-    sysbus_register_withprop(&mpcore_priv_info);
+    sysbus_register_withprop(&a9mp_priv_info);
 }
 
-device_init(a9mpcore_register_devices)
+device_init(a9mp_register_devices)