diff mbox series

[bpf-next,v2,05/28] selftests/bpf: add tests for the HID-bpf initial implementation

Message ID 20220304172852.274126-6-benjamin.tissoires@redhat.com
State New
Headers show
Series Introduce eBPF support for HID devices | expand

Commit Message

Benjamin Tissoires March 4, 2022, 5:28 p.m. UTC
The test is pretty basic:
- create a virtual uhid device that no userspace will like (to not mess
  up the running system)
- attach a BPF prog to it
- open the matching hidraw node
- inject one event and check:
  * that the BPF program can do something on the event stream
  * can modify the event stream

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

---

changes in v2:
- split the series by bpf/libbpf/hid/selftests and samples
---
 tools/testing/selftests/bpf/prog_tests/hid.c | 335 +++++++++++++++++++
 tools/testing/selftests/bpf/progs/hid.c      |  20 ++
 2 files changed, 355 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/hid.c
 create mode 100644 tools/testing/selftests/bpf/progs/hid.c

Comments

Song Liu March 5, 2022, 12:41 a.m. UTC | #1
On Fri, Mar 4, 2022 at 9:31 AM Benjamin Tissoires
<benjamin.tissoires@redhat.com> wrote:
>
> The test is pretty basic:
> - create a virtual uhid device that no userspace will like (to not mess
>   up the running system)
> - attach a BPF prog to it
> - open the matching hidraw node
> - inject one event and check:
>   * that the BPF program can do something on the event stream
>   * can modify the event stream
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
>

Does this test run with vm (qemu, etc.)? Maybe we need to update
tools/testing/selftests/bpf/config ?

Thanks,
Song
Benjamin Tissoires March 5, 2022, 10:10 a.m. UTC | #2
On Sat, Mar 5, 2022 at 1:41 AM Song Liu <song@kernel.org> wrote:
>
> On Fri, Mar 4, 2022 at 9:31 AM Benjamin Tissoires
> <benjamin.tissoires@redhat.com> wrote:
> >
> > The test is pretty basic:
> > - create a virtual uhid device that no userspace will like (to not mess
> >   up the running system)
> > - attach a BPF prog to it
> > - open the matching hidraw node
> > - inject one event and check:
> >   * that the BPF program can do something on the event stream
> >   * can modify the event stream
> >
> > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> >
>
> Does this test run with vm (qemu, etc.)? Maybe we need to update
> tools/testing/selftests/bpf/config ?

Good point. I'll give it a shot. I was testing on my devel machine so
it was quicker to iterate, but I completely forgot to make a run at
qemu with the scripts in place.

Cheers,
Benjamin

>
> Thanks,
> Song
>
diff mbox series

Patch

diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c
new file mode 100644
index 000000000000..ee495d5a8bd5
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/hid.c
@@ -0,0 +1,335 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2022 Red Hat */
+#include <test_progs.h>
+#include <testing_helpers.h>
+#include "hid.skel.h"
+
+#include <fcntl.h>
+#include <fnmatch.h>
+#include <dirent.h>
+#include <poll.h>
+#include <stdbool.h>
+#include <linux/uhid.h>
+
+static unsigned char rdesc[] = {
+	0x06, 0x00, 0xff,	/* Usage Page (Vendor Defined Page 1) */
+	0x09, 0x21,		/* Usage (Vendor Usage 0x21) */
+	0xa1, 0x01,		/* COLLECTION (Application) */
+	0x09, 0x01,			/* Usage (Vendor Usage 0x01) */
+	0xa1, 0x00,			/* COLLECTION (Physical) */
+	0x85, 0x01,				/* REPORT_ID (1) */
+	0x06, 0x00, 0xff,			/* Usage Page (Vendor Defined Page 1) */
+	0x19, 0x01,				/* USAGE_MINIMUM (1) */
+	0x29, 0x03,				/* USAGE_MAXIMUM (3) */
+	0x15, 0x00,				/* LOGICAL_MINIMUM (0) */
+	0x25, 0x01,				/* LOGICAL_MAXIMUM (1) */
+	0x95, 0x03,				/* REPORT_COUNT (3) */
+	0x75, 0x01,				/* REPORT_SIZE (1) */
+	0x81, 0x02,				/* INPUT (Data,Var,Abs) */
+	0x95, 0x01,				/* REPORT_COUNT (1) */
+	0x75, 0x05,				/* REPORT_SIZE (5) */
+	0x81, 0x01,				/* INPUT (Cnst,Var,Abs) */
+	0x05, 0x01,				/* USAGE_PAGE (Generic Desktop) */
+	0x09, 0x30,				/* USAGE (X) */
+	0x09, 0x31,				/* USAGE (Y) */
+	0x15, 0x81,				/* LOGICAL_MINIMUM (-127) */
+	0x25, 0x7f,				/* LOGICAL_MAXIMUM (127) */
+	0x75, 0x10,				/* REPORT_SIZE (16) */
+	0x95, 0x02,				/* REPORT_COUNT (2) */
+	0x81, 0x06,				/* INPUT (Data,Var,Rel) */
+
+	0x06, 0x00, 0xff,			/* Usage Page (Vendor Defined Page 1) */
+	0x19, 0x01,				/* USAGE_MINIMUM (1) */
+	0x29, 0x03,				/* USAGE_MAXIMUM (3) */
+	0x15, 0x00,				/* LOGICAL_MINIMUM (0) */
+	0x25, 0x01,				/* LOGICAL_MAXIMUM (1) */
+	0x95, 0x03,				/* REPORT_COUNT (3) */
+	0x75, 0x01,				/* REPORT_SIZE (1) */
+	0x91, 0x02,				/* Output (Data,Var,Abs) */
+	0x95, 0x01,				/* REPORT_COUNT (1) */
+	0x75, 0x05,				/* REPORT_SIZE (5) */
+	0x91, 0x01,				/* Output (Cnst,Var,Abs) */
+
+	0x06, 0x00, 0xff,			/* Usage Page (Vendor Defined Page 1) */
+	0x19, 0x06,				/* USAGE_MINIMUM (6) */
+	0x29, 0x08,				/* USAGE_MAXIMUM (8) */
+	0x15, 0x00,				/* LOGICAL_MINIMUM (0) */
+	0x25, 0x01,				/* LOGICAL_MAXIMUM (1) */
+	0x95, 0x03,				/* REPORT_COUNT (3) */
+	0x75, 0x01,				/* REPORT_SIZE (1) */
+	0xb1, 0x02,				/* Feature (Data,Var,Abs) */
+	0x95, 0x01,				/* REPORT_COUNT (1) */
+	0x75, 0x05,				/* REPORT_SIZE (5) */
+	0x91, 0x01,				/* Output (Cnst,Var,Abs) */
+
+	0xc0,				/* END_COLLECTION */
+	0xc0,			/* END_COLLECTION */
+};
+
+static int uhid_write(int fd, const struct uhid_event *ev)
+{
+	ssize_t ret;
+
+	ret = write(fd, ev, sizeof(*ev));
+	if (ret < 0) {
+		fprintf(stderr, "Cannot write to uhid: %m\n");
+		return -errno;
+	} else if (ret != sizeof(*ev)) {
+		fprintf(stderr, "Wrong size written to uhid: %zd != %zu\n",
+			ret, sizeof(ev));
+		return -EFAULT;
+	} else {
+		return 0;
+	}
+}
+
+static int create(int fd, int rand_nb)
+{
+	struct uhid_event ev;
+	char buf[25];
+
+	sprintf(buf, "test-uhid-device-%d", rand_nb);
+
+	memset(&ev, 0, sizeof(ev));
+	ev.type = UHID_CREATE;
+	strcpy((char *)ev.u.create.name, buf);
+	ev.u.create.rd_data = rdesc;
+	ev.u.create.rd_size = sizeof(rdesc);
+	ev.u.create.bus = BUS_USB;
+	ev.u.create.vendor = 0x0001;
+	ev.u.create.product = 0x0a37;
+	ev.u.create.version = 0;
+	ev.u.create.country = 0;
+
+	sprintf(buf, "%d", rand_nb);
+	strcpy((char *)ev.u.create.phys, buf);
+
+	return uhid_write(fd, &ev);
+}
+
+static void destroy(int fd)
+{
+	struct uhid_event ev;
+
+	memset(&ev, 0, sizeof(ev));
+	ev.type = UHID_DESTROY;
+
+	uhid_write(fd, &ev);
+}
+
+static int send_event(int fd, u8 *buf, size_t size)
+{
+	struct uhid_event ev;
+
+	if (size > sizeof(ev.u.input.data))
+		return -E2BIG;
+
+	memset(&ev, 0, sizeof(ev));
+	ev.type = UHID_INPUT2;
+	ev.u.input2.size = size;
+
+	memcpy(ev.u.input2.data, buf, size);
+
+	return uhid_write(fd, &ev);
+}
+
+static int setup_uhid(int rand_nb)
+{
+	int fd;
+	const char *path = "/dev/uhid";
+	int ret;
+
+	fd = open(path, O_RDWR | O_CLOEXEC);
+	if (!ASSERT_GE(fd, 0, "open uhid-cdev"))
+		return -EPERM;
+
+	ret = create(fd, rand_nb);
+	if (!ASSERT_OK(ret, "create uhid device")) {
+		close(fd);
+		return -EPERM;
+	}
+
+	return fd;
+}
+
+static int get_sysfs_fd(int rand_nb)
+{
+	const char *workdir = "/sys/devices/virtual/misc/uhid";
+	const char *target = "0003:0001:0A37.*";
+	char uevent[1024];
+	char temp[512];
+	char phys[512];
+	DIR *d;
+	struct dirent *dir;
+	int fd, nread;
+	int found = -1;
+
+	/* it would be nice to be able to use nftw, but the no_alu32 target doesn't support it */
+
+	sprintf(phys, "PHYS=%d", rand_nb);
+
+	d = opendir(workdir);
+	if (d) {
+		while ((dir = readdir(d)) != NULL) {
+			if (fnmatch(target, dir->d_name, 0))
+				continue;
+
+			/* we found the correct VID/PID, now check for phys */
+			sprintf(uevent, "%s/%s/uevent", workdir, dir->d_name);
+			fd = open(uevent, O_RDONLY | O_NONBLOCK);
+			if (fd < 0)
+				continue;
+
+			nread = read(fd, temp, ARRAY_SIZE(temp));
+			if (nread > 0 && (strstr(temp, phys)) != NULL) {
+				found = fd;
+				break;
+			}
+
+			close(fd);
+			fd = 0;
+		}
+		closedir(d);
+	}
+
+	return found;
+}
+
+static int get_hidraw(struct bpf_link *link)
+{
+	struct bpf_link_info info = {0};
+	int prog_id, i;
+
+	/* retry 5 times in case the system is loaded */
+	for (i = 5; i > 0; i--) {
+		usleep(10);
+		prog_id = link_info_prog_id(link, &info);
+		if (!prog_id)
+			continue;
+		if (info.hid.hidraw_ino >= 0)
+			break;
+	}
+
+	if (!prog_id)
+		return -1;
+
+	return info.hid.hidraw_ino;
+}
+
+/*
+ * Attach hid_first_event to the given uhid device,
+ * retrieve and open the matching hidraw node,
+ * inject one event in the uhid device,
+ * check that the program sees it and can change the data
+ */
+static int test_hid_raw_event(struct hid *hid_skel, int uhid_fd, int sysfs_fd)
+{
+	int err, hidraw_ino, hidraw_fd = -1;
+	char hidraw_path[64] = {0};
+	u8 buf[10] = {0};
+	int ret = -1;
+
+	/* check that the program is correctly loaded */
+	ASSERT_EQ(hid_skel->data->callback_check, 52, "callback_check1");
+	ASSERT_EQ(hid_skel->data->callback2_check, 52, "callback2_check1");
+
+	/* attach the first program */
+	hid_skel->links.hid_first_event =
+		bpf_program__attach_hid(hid_skel->progs.hid_first_event, sysfs_fd);
+	if (!ASSERT_OK_PTR(hid_skel->links.hid_first_event,
+			   "attach_hid(hid_first_event)"))
+		return PTR_ERR(hid_skel->links.hid_first_event);
+
+	hidraw_ino = get_hidraw(hid_skel->links.hid_first_event);
+	if (!ASSERT_GE(hidraw_ino, 0, "get_hidraw"))
+		goto cleanup;
+
+	/* open hidraw node to check the other side of the pipe */
+	sprintf(hidraw_path, "/dev/hidraw%d", hidraw_ino);
+	hidraw_fd = open(hidraw_path, O_RDWR | O_NONBLOCK);
+
+	if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw"))
+		goto cleanup;
+
+	/* inject one event */
+	buf[0] = 1;
+	buf[1] = 42;
+	send_event(uhid_fd, buf, 6);
+
+	/* check that hid_first_event() was executed */
+	ASSERT_EQ(hid_skel->data->callback_check, 42, "callback_check1");
+
+	/* read the data from hidraw */
+	memset(buf, 0, sizeof(buf));
+	err = read(hidraw_fd, buf, sizeof(buf));
+	if (!ASSERT_EQ(err, 6, "read_hidraw"))
+		goto cleanup;
+
+	if (!ASSERT_EQ(buf[2], 47, "hid_first_event"))
+		goto cleanup;
+
+	/* inject another event */
+	buf[0] = 1;
+	buf[1] = 47;
+	send_event(uhid_fd, buf, 6);
+
+	/* check that hid_first_event() was executed */
+	ASSERT_EQ(hid_skel->data->callback_check, 47, "callback_check1");
+
+	/* read the data from hidraw */
+	memset(buf, 0, sizeof(buf));
+	err = read(hidraw_fd, buf, sizeof(buf));
+	if (!ASSERT_EQ(err, 6, "read_hidraw"))
+		goto cleanup;
+
+	if (!ASSERT_EQ(buf[2], 52, "hid_first_event"))
+		goto cleanup;
+
+	ret = 0;
+
+cleanup:
+	if (hidraw_fd >= 0)
+		close(hidraw_fd);
+
+	hid__detach(hid_skel);
+
+	return ret;
+}
+
+void serial_test_hid_bpf(void)
+{
+	struct hid *hid_skel = NULL;
+	int err, uhid_fd, sysfs_fd;
+	time_t t;
+	int rand_nb;
+
+	/* initialize random number generator */
+	srand((unsigned int)time(&t));
+
+	rand_nb = rand() % 1024;
+
+	uhid_fd = setup_uhid(rand_nb);
+	if (!ASSERT_GE(uhid_fd, 0, "setup uhid"))
+		return;
+
+	/* give a little bit of time for the device to appear */
+	/* TODO: check on uhid events */
+	usleep(1000);
+
+	/* locate the uevent file of the created device */
+	sysfs_fd = get_sysfs_fd(rand_nb);
+	if (!ASSERT_GE(sysfs_fd, 0, "locate sysfs uhid device"))
+		goto cleanup;
+
+	hid_skel = hid__open_and_load();
+	if (!ASSERT_OK_PTR(hid_skel, "hid_skel_load"))
+		goto cleanup;
+
+	/* start the tests! */
+	err = test_hid_raw_event(hid_skel, uhid_fd, sysfs_fd);
+	ASSERT_OK(err, "hid");
+
+cleanup:
+	hid__destroy(hid_skel);
+	destroy(uhid_fd);
+}
diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c
new file mode 100644
index 000000000000..2201dd3b105d
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/hid.c
@@ -0,0 +1,20 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2022 Red hat */
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <linux/bpf_hid.h>
+
+char _license[] SEC("license") = "GPL";
+
+__u64 callback_check = 52;
+__u64 callback2_check = 52;
+
+SEC("hid/device_event")
+int hid_first_event(struct hid_bpf_ctx *ctx)
+{
+	callback_check = ctx->data[1];
+
+	ctx->data[2] = ctx->data[1] + 5;
+
+	return 0;
+}