Message ID | 20220311162445.346685-9-vincent.whitchurch@axis.com |
---|---|
State | New |
Headers | show |
Series | roadtest: a driver testing framework | expand |
On Fri, 11 Mar 2022 17:24:43 +0100 Vincent Whitchurch <vincent.whitchurch@axis.com> wrote: > Add roadtests for the vcnl4000 driver, testing several of the driver's > features including buffer and event handling. Since it's the first IIO > roadtest testing the non-sysfs parts, some support code for using the > IIO ABI is included. > > The different variants supported by the driver are in separate tests and > models since no two variants have fully identical register interfaces. > This duplicates some of the test code, but it: > > - Avoids the tests duplicating the same multi-variant logic as the > driver, reducing the risk for both the test and the driver being > wrong. > > - Allows each variant's test and model to be individually understood > and modified looking at only one specific datasheet, making it easier > to extend tests and implement new features in the driver. > > During development of these tests, two oddities were noticed in the > driver's handling of VCNL4040, but the tests simply assume that the > current driver knows what it's doing (although we may want to fix the > first point later): > > - The driver reads an invalid/undefined register on the VCNL4040 when > attempting to distinguish between that one and VCNL4200. > > - The driver uses a lux/step unit which differs from the datasheet (but > which is specified in an application note). > > Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Hi Vincent, Very interesting bit of work. My current approach for similar testing is to write a qemu model for the hardware, but that currently requires carefully crafted tests. Most of the time I'm only doing that to verify refactoring of existing drivers. One thing that makes me nervous here is the python element though as I've not written significant python in about 20 years. That is going to be a burden for kernel developers and maintainers... Nothing quite like badly written tests to make for a mess in the long run and I suspect my python for example would be very very badly written :) Cut and paste will of course get us a long way... I dream of a world where every driver is testable by people with out hardware but I fear it may be a while yet. Hopefully this will get us a little closer! I more or less follow what is going on here (good docs btw in the earlier patch definitely helped). So far I'm thoroughly in favour of road test subject to actually being able to review the tests or getting sufficient support to do so. It's a 'how to scale it' question really... Jonathan > --- > .../roadtest/roadtest/tests/iio/iio.py | 112 +++++++ > .../roadtest/roadtest/tests/iio/light/config | 1 + > .../roadtest/tests/iio/light/test_vcnl4000.py | 132 ++++++++ > .../roadtest/tests/iio/light/test_vcnl4010.py | 282 ++++++++++++++++++ > .../roadtest/tests/iio/light/test_vcnl4040.py | 104 +++++++ > .../roadtest/tests/iio/light/test_vcnl4200.py | 96 ++++++ > 6 files changed, 727 insertions(+) > create mode 100644 tools/testing/roadtest/roadtest/tests/iio/iio.py > create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py > create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py > create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py > create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py > > diff --git a/tools/testing/roadtest/roadtest/tests/iio/iio.py b/tools/testing/roadtest/roadtest/tests/iio/iio.py > new file mode 100644 > index 000000000000..ea57b28ea9d3 > --- /dev/null > +++ b/tools/testing/roadtest/roadtest/tests/iio/iio.py > @@ -0,0 +1,112 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# Copyright Axis Communications AB > + > +import contextlib > +import enum > +import fcntl > +import struct > +from dataclasses import dataclass, field > +from typing import Any > + > +IIO_GET_EVENT_FD_IOCTL = 0x80046990 > +IIO_BUFFER_GET_FD_IOCTL = 0xC0046991 > + > + > +class IIOChanType(enum.IntEnum): > + IIO_VOLTAGE = 0 > + IIO_CURRENT = 1 > + IIO_POWER = 2 > + IIO_ACCEL = 3 > + IIO_ANGL_VEL = 4 > + IIO_MAGN = 5 > + IIO_LIGHT = 6 > + IIO_INTENSITY = 7 > + IIO_PROXIMITY = 8 > + IIO_TEMP = 9 > + IIO_INCLI = 10 > + IIO_ROT = 11 > + IIO_ANGL = 12 > + IIO_TIMESTAMP = 13 > + IIO_CAPACITANCE = 14 > + IIO_ALTVOLTAGE = 15 > + IIO_CCT = 16 > + IIO_PRESSURE = 17 > + IIO_HUMIDITYRELATIVE = 18 > + IIO_ACTIVITY = 19 > + IIO_STEPS = 20 > + IIO_ENERGY = 21 > + IIO_DISTANCE = 22 > + IIO_VELOCITY = 23 > + IIO_CONCENTRATION = 24 > + IIO_RESISTANCE = 25 > + IIO_PH = 26 > + IIO_UVINDEX = 27 > + IIO_ELECTRICALCONDUCTIVITY = 28 > + IIO_COUNT = 29 > + IIO_INDEX = 30 > + IIO_GRAVITY = 31 > + IIO_POSITIONRELATIVE = 32 > + IIO_PHASE = 33 > + IIO_MASSCONCENTRATION = 34 > + > + > +@dataclass > +class IIOEvent: > + id: int > + timestamp: int > + type: IIOChanType = field(init=False) > + > + def __post_init__(self) -> None: > + self.type = IIOChanType((self.id >> 32) & 0xFF) > + > + > +class IIOEventMonitor(contextlib.AbstractContextManager): > + def __init__(self, devname: str) -> None: > + self.devname = devname > + > + def __enter__(self) -> "IIOEventMonitor": > + self.file = open(self.devname, "rb") > + > + s = struct.Struct("L") > + buf = bytearray(s.size) > + fcntl.ioctl(self.file.fileno(), IIO_GET_EVENT_FD_IOCTL, buf) > + eventfd = s.unpack(buf)[0] > + self.eventf = open(eventfd, "rb") > + > + return self > + > + def read(self) -> IIOEvent: > + s = struct.Struct("Qq") > + buf = self.eventf.read(s.size) > + return IIOEvent(*s.unpack(buf)) > + > + def __exit__(self, *_: Any) -> None: > + self.eventf.close() > + self.file.close() > + > + > +class IIOBuffer(contextlib.AbstractContextManager): > + def __init__(self, devname: str, bufidx: int) -> None: > + self.devname = devname > + self.bufidx = bufidx > + > + def __enter__(self) -> "IIOBuffer": > + self.file = open(self.devname, "rb") > + > + s = struct.Struct("L") > + buf = bytearray(s.size) > + s.pack_into(buf, 0, self.bufidx) > + fcntl.ioctl(self.file.fileno(), IIO_BUFFER_GET_FD_IOCTL, buf) > + eventfd = s.unpack(buf)[0] > + self.eventf = open(eventfd, "rb") > + > + return self > + > + def read(self, spec: str) -> tuple: > + s = struct.Struct(spec) > + buf = self.eventf.read(s.size) > + return s.unpack(buf) > + > + def __exit__(self, *_: Any) -> None: > + self.eventf.close() > + self.file.close() > diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/config b/tools/testing/roadtest/roadtest/tests/iio/light/config > index b9753f2d0728..3bd4125cbb6b 100644 > --- a/tools/testing/roadtest/roadtest/tests/iio/light/config > +++ b/tools/testing/roadtest/roadtest/tests/iio/light/config > @@ -1 +1,2 @@ > CONFIG_OPT3001=m > +CONFIG_VCNL4000=m > diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py > new file mode 100644 > index 000000000000..16a5bed18b7e > --- /dev/null > +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py > @@ -0,0 +1,132 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# Copyright Axis Communications AB > + > +import errno > +import logging > +from typing import Any, Final > + > +from roadtest.backend.i2c import SMBusModel > +from roadtest.core.devicetree import DtFragment, DtVar > +from roadtest.core.hardware import Hardware > +from roadtest.core.modules import insmod, rmmod > +from roadtest.core.suite import UMLTestCase > +from roadtest.core.sysfs import I2CDriver, read_float, read_int, read_str > + > +logger = logging.getLogger(__name__) > + > +REG_COMMAND: Final = 0x80 > +REG_PRODUCT_ID_REVISION: Final = 0x81 > +REG_IR_LED_CURRENT: Final = 0x83 > +REG_ALS_PARAM: Final = 0x84 > +REG_ALS_RESULT_HIGH: Final = 0x85 > +REG_ALS_RESULT_LOW: Final = 0x86 > +REG_PROX_RESULT_HIGH: Final = 0x87 > +REG_PROX_RESULT_LOW: Final = 0x88 > +REG_PROX_SIGNAL_FREQ: Final = 0x89 > + > +REG_COMMAND_ALS_DATA_RDY: Final = 1 << 6 > +REG_COMMAND_PROX_DATA_RDY: Final = 1 << 5 > + > + > +class VCNL4000(SMBusModel): > + def __init__(self, **kwargs: Any) -> None: > + super().__init__(regbytes=1, **kwargs) > + self.regs = { > + REG_COMMAND: 0b_1000_0000, > + REG_PRODUCT_ID_REVISION: 0x11, > + # Register "without function in current version" > + 0x82: 0x00, > + REG_IR_LED_CURRENT: 0x00, > + REG_ALS_PARAM: 0x00, > + REG_ALS_RESULT_HIGH: 0x00, > + REG_ALS_RESULT_LOW: 0x00, > + REG_PROX_RESULT_HIGH: 0x00, > + REG_PROX_RESULT_LOW: 0x00, > + REG_PROX_RESULT_LOW: 0x00, > + } > + > + def reg_read(self, addr: int) -> int: > + val = self.regs[addr] > + > + if addr in (REG_ALS_RESULT_HIGH, REG_ALS_RESULT_LOW): > + self.regs[REG_COMMAND] &= ~REG_COMMAND_ALS_DATA_RDY > + if addr in (REG_PROX_RESULT_HIGH, REG_PROX_RESULT_LOW): > + self.regs[REG_COMMAND] &= ~REG_COMMAND_PROX_DATA_RDY > + > + return val > + > + def reg_write(self, addr: int, val: int) -> None: > + assert addr in self.regs > + > + if addr == REG_COMMAND: > + rw = 0b_0001_1000 > + val = (self.regs[addr] & ~rw) | (val & rw) > + > + self.regs[addr] = val > + > + def inject(self, addr: int, val: int, mask: int = ~0) -> None: > + old = self.regs[addr] & ~mask > + new = old | (val & mask) > + self.regs[addr] = new > + > + > +class TestVCNL4000(UMLTestCase): > + dts = DtFragment( > + src=""" > +&i2c { > + light-sensor@$addr$ { > + compatible = "vishay,vcnl4000"; > + reg = <0x$addr$>; > + }; > +}; > + """, > + variables={ > + "addr": DtVar.I2C_ADDR, > + }, > + ) > + > + @classmethod > + def setUpClass(cls) -> None: > + insmod("vcnl4000") > + > + @classmethod > + def tearDownClass(cls) -> None: > + rmmod("vcnl4000") > + > + def setUp(self) -> None: > + self.driver = I2CDriver("vcnl4000") > + self.hw = Hardware("i2c") > + self.hw.load_model(VCNL4000) > + > + def tearDown(self) -> None: > + self.hw.close() > + > + def test_lux(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + scale = read_float(dev.path / "iio:device0/in_illuminance_scale") > + self.assertEqual(scale, 0.25) > + > + data = [ > + (0x00, 0x00), > + (0x12, 0x34), > + (0xFF, 0xFF), > + ] > + luxfile = dev.path / "iio:device0/in_illuminance_raw" > + for high, low in data: > + self.hw.inject(REG_ALS_RESULT_HIGH, high) > + self.hw.inject(REG_ALS_RESULT_LOW, low) > + self.hw.inject( > + REG_COMMAND, > + val=REG_COMMAND_ALS_DATA_RDY, > + mask=REG_COMMAND_ALS_DATA_RDY, > + ) > + > + self.assertEqual(read_int(luxfile), high << 8 | low) > + > + def test_lux_timeout(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + # self.hw.set_never_ready(True) > + with self.assertRaises(OSError) as cm: > + luxfile = dev.path / "iio:device0/in_illuminance_raw" > + read_str(luxfile) > + self.assertEqual(cm.exception.errno, errno.EIO) > diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py > new file mode 100644 > index 000000000000..929db970405f > --- /dev/null > +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py > @@ -0,0 +1,282 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# Copyright Axis Communications AB > + > +import errno > +import logging > +from pathlib import Path > +from typing import Any, Final, Optional > + > +from roadtest.backend.i2c import SMBusModel > +from roadtest.core.devicetree import DtFragment, DtVar > +from roadtest.core.hardware import Hardware > +from roadtest.core.modules import insmod, rmmod > +from roadtest.core.suite import UMLTestCase > +from roadtest.core.sysfs import ( > + I2CDriver, > + read_float, > + read_int, > + read_str, > + write_int, > + write_str, > +) > +from roadtest.tests.iio import iio > + > +logger = logging.getLogger(__name__) > + > +REG_COMMAND: Final = 0x80 > +REG_PRODUCT_ID_REVISION: Final = 0x81 > +REG_PROXIMITY_RATE: Final = 0x82 > +REG_IR_LED_CURRENT: Final = 0x83 > +REG_ALS_PARAM: Final = 0x84 > +REG_ALS_RESULT_HIGH: Final = 0x85 > +REG_ALS_RESULT_LOW: Final = 0x86 > +REG_PROX_RESULT_HIGH: Final = 0x87 > +REG_PROX_RESULT_LOW: Final = 0x88 > +REG_INTERRUPT_CONTROL: Final = 0x89 > +REG_LOW_THRESHOLD_HIGH: Final = 0x8A > +REG_LOW_THRESHOLD_LOW: Final = 0x8B > +REG_HIGH_THRESHOLD_HIGH: Final = 0x8C > +REG_HIGH_THRESHOLD_LOW: Final = 0x8D > +REG_INTERRUPT_STATUS: Final = 0x8E > + > +REG_COMMAND_ALS_DATA_RDY: Final = 1 << 6 > +REG_COMMAND_PROX_DATA_RDY: Final = 1 << 5 > + > + > +class VCNL4010(SMBusModel): > + def __init__(self, int: Optional[int] = None, **kwargs: Any) -> None: > + super().__init__(regbytes=1, **kwargs) > + self.int = int > + self._set_int(False) > + self.regs = { > + REG_COMMAND: 0b_1000_0000, > + REG_PRODUCT_ID_REVISION: 0x21, > + REG_PROXIMITY_RATE: 0x00, > + REG_IR_LED_CURRENT: 0x00, > + REG_ALS_PARAM: 0x00, > + REG_ALS_RESULT_HIGH: 0x00, > + REG_ALS_RESULT_LOW: 0x00, > + REG_PROX_RESULT_HIGH: 0x00, > + REG_PROX_RESULT_LOW: 0x00, > + REG_INTERRUPT_CONTROL: 0x00, > + REG_LOW_THRESHOLD_HIGH: 0x00, > + REG_LOW_THRESHOLD_LOW: 0x00, > + REG_HIGH_THRESHOLD_HIGH: 0x00, > + REG_HIGH_THRESHOLD_LOW: 0x00, > + REG_INTERRUPT_STATUS: 0x00, > + } > + > + def _set_int(self, active: int) -> None: > + # Active-low > + self.backend.gpio.set(self.int, not active) > + > + def _update_irq(self) -> None: > + selftimed_en = self.regs[REG_COMMAND] & (1 << 0) > + prox_en = self.regs[REG_COMMAND] & (1 << 1) > + prox_data_rdy = self.regs[REG_COMMAND] & REG_COMMAND_PROX_DATA_RDY > + int_prox_ready_en = self.regs[REG_INTERRUPT_CONTROL] & (1 << 3) > + > + logger.debug( > + f"{selftimed_en=:x} {prox_en=:x} {prox_data_rdy=:x} {int_prox_ready_en=:x}" > + ) > + > + if selftimed_en and prox_en and prox_data_rdy and int_prox_ready_en: > + self.regs[REG_INTERRUPT_STATUS] |= 1 << 3 > + > + low_threshold = ( > + self.regs[REG_LOW_THRESHOLD_HIGH] << 8 | self.regs[REG_LOW_THRESHOLD_LOW] > + ) > + high_threshold = ( > + self.regs[REG_HIGH_THRESHOLD_HIGH] << 8 | self.regs[REG_HIGH_THRESHOLD_LOW] > + ) > + proximity = ( > + self.regs[REG_PROX_RESULT_HIGH] << 8 | self.regs[REG_PROX_RESULT_LOW] > + ) > + int_thres_en = self.regs[REG_INTERRUPT_CONTROL] & (1 << 1) > + > + logger.debug( > + f"{low_threshold=:x} {high_threshold=:x} {proximity=:x} {int_thres_en=:x}" > + ) > + > + if int_thres_en: > + if proximity < low_threshold: > + logger.debug("LOW") > + self.regs[REG_INTERRUPT_STATUS] |= 1 << 1 > + if proximity > high_threshold: > + logger.debug("HIGH") > + self.regs[REG_INTERRUPT_STATUS] |= 1 << 0 > + > + self._set_int(self.regs[REG_INTERRUPT_STATUS]) > + > + def reg_read(self, addr: int) -> int: > + val = self.regs[addr] > + > + if addr in (REG_ALS_RESULT_HIGH, REG_ALS_RESULT_LOW): > + self.regs[REG_COMMAND] &= ~REG_COMMAND_ALS_DATA_RDY > + if addr in (REG_PROX_RESULT_HIGH, REG_PROX_RESULT_LOW): > + self.regs[REG_COMMAND] &= ~REG_COMMAND_PROX_DATA_RDY > + > + return val > + > + def reg_write(self, addr: int, val: int) -> None: > + assert addr in self.regs > + > + if addr == REG_COMMAND: > + rw = 0b_0001_1111 > + val = (self.regs[addr] & ~rw) | (val & rw) > + elif addr == REG_INTERRUPT_STATUS: > + val = self.regs[addr] & ~(val & 0xF) > + > + self.regs[addr] = val > + self._update_irq() > + > + def inject(self, addr: int, val: int, mask: int = ~0) -> None: > + old = self.regs[addr] & ~mask > + new = old | (val & mask) > + self.regs[addr] = new > + self._update_irq() > + > + def set_bit(self, addr: int, val: int) -> None: > + self.inject(addr, val, val) > + > + > +class TestVCNL4010(UMLTestCase): > + dts = DtFragment( > + src=""" > +#include <dt-bindings/interrupt-controller/irq.h> > + > +&i2c { > + light-sensor@$addr$ { > + compatible = "vishay,vcnl4020"; > + reg = <0x$addr$>; > + interrupt-parent = <&gpio>; > + interrupts = <$gpio$ IRQ_TYPE_EDGE_FALLING>; > + }; > +}; > + """, > + variables={ > + "addr": DtVar.I2C_ADDR, > + "gpio": DtVar.GPIO_PIN, > + }, > + ) > + > + @classmethod > + def setUpClass(cls) -> None: > + insmod("vcnl4000") > + > + @classmethod > + def tearDownClass(cls) -> None: > + rmmod("vcnl4000") > + > + def setUp(self) -> None: > + self.driver = I2CDriver("vcnl4000") > + self.hw = Hardware("i2c") > + self.hw.load_model(VCNL4010, int=self.dts["gpio"]) > + > + def tearDown(self) -> None: > + self.hw.close() > + > + def test_lux(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + > + scale = read_float(dev.path / "iio:device0/in_illuminance_scale") > + self.assertEqual(scale, 0.25) > + > + data = [ > + (0x00, 0x00), > + (0x12, 0x34), > + (0xFF, 0xFF), > + ] > + luxfile = dev.path / "iio:device0/in_illuminance_raw" > + for high, low in data: > + self.hw.inject(REG_ALS_RESULT_HIGH, high) > + self.hw.inject(REG_ALS_RESULT_LOW, low) > + self.hw.set_bit(REG_COMMAND, REG_COMMAND_ALS_DATA_RDY) > + > + self.assertEqual(read_int(luxfile), high << 8 | low) > + > + def test_lux_timeout(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + with self.assertRaises(OSError) as cm: > + luxfile = dev.path / "iio:device0/in_illuminance_raw" > + read_str(luxfile) > + self.assertEqual(cm.exception.errno, errno.EIO) > + > + def test_proximity_thresh_rising(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + high_thresh = ( > + dev.path / "iio:device0/events/in_proximity_thresh_rising_value" > + ) > + write_int(high_thresh, 0x1234) > + > + mock = self.hw.update_mock() > + mock.assert_last_reg_write(self, REG_HIGH_THRESHOLD_HIGH, 0x12) > + mock.assert_last_reg_write(self, REG_HIGH_THRESHOLD_LOW, 0x34) > + mock.reset_mock() > + > + self.assertEqual(read_int(high_thresh), 0x1234) > + > + with iio.IIOEventMonitor("/dev/iio:device0") as mon: > + en = dev.path / "iio:device0/events/in_proximity_thresh_either_en" > + write_int(en, 1) > + > + self.hw.inject(REG_PROX_RESULT_HIGH, 0x12) > + self.hw.inject(REG_PROX_RESULT_LOW, 0x35) > + self.hw.set_bit(REG_COMMAND, REG_COMMAND_PROX_DATA_RDY) > + self.hw.kick() > + > + self.assertEqual(read_int(en), 1) > + > + event = mon.read() > + self.assertEqual(event.type, iio.IIOChanType.IIO_PROXIMITY) > + > + def test_proximity_thresh_falling(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + high_thresh = ( > + dev.path / "iio:device0/events/in_proximity_thresh_falling_value" > + ) > + write_int(high_thresh, 0x0ABC) > + > + mock = self.hw.update_mock() > + mock.assert_last_reg_write(self, REG_LOW_THRESHOLD_HIGH, 0x0A) > + mock.assert_last_reg_write(self, REG_LOW_THRESHOLD_LOW, 0xBC) > + mock.reset_mock() > + > + self.assertEqual(read_int(high_thresh), 0x0ABC) > + > + with iio.IIOEventMonitor("/dev/iio:device0") as mon: > + write_int( > + dev.path / "iio:device0/events/in_proximity_thresh_either_en", 1 > + ) > + > + event = mon.read() > + self.assertEqual(event.type, iio.IIOChanType.IIO_PROXIMITY) > + > + def test_proximity_triggered(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + data = [ > + (0x00, 0x00, 0), > + (0x00, 0x01, 1), > + (0xF0, 0x02, 0xF002), > + (0xFF, 0xFF, 0xFFFF), > + ] > + > + trigger = read_str(Path("/sys/bus/iio/devices/trigger0/name")) > + > + write_int(dev.path / "iio:device0/buffer0/in_proximity_en", 1) > + write_str(dev.path / "iio:device0/trigger/current_trigger", trigger) > + > + with iio.IIOBuffer("/dev/iio:device0", bufidx=0) as buffer: > + write_int(dev.path / "iio:device0/buffer0/length", 128) > + write_int(dev.path / "iio:device0/buffer0/enable", 1) > + > + for low, high, expected in data: > + self.hw.inject(REG_PROX_RESULT_HIGH, low) > + self.hw.inject(REG_PROX_RESULT_LOW, high) > + self.hw.set_bit(REG_COMMAND, REG_COMMAND_PROX_DATA_RDY) > + self.hw.kick() > + > + scanline = buffer.read("H") > + > + val = scanline[0] > + self.assertEqual(val, expected) > diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py > new file mode 100644 > index 000000000000..f2aa2cb9f3d5 > --- /dev/null > +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py > @@ -0,0 +1,104 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# Copyright Axis Communications AB > + > +import logging > +from typing import Any > + > +from roadtest.backend.i2c import SMBusModel > +from roadtest.core.devicetree import DtFragment, DtVar > +from roadtest.core.hardware import Hardware > +from roadtest.core.modules import insmod, rmmod > +from roadtest.core.suite import UMLTestCase > +from roadtest.core.sysfs import I2CDriver, read_float, read_int > + > +logger = logging.getLogger(__name__) > + > + > +class VCNL4040(SMBusModel): > + def __init__(self, **kwargs: Any) -> None: > + super().__init__(regbytes=2, byteorder="little", **kwargs) > + self.regs = { > + 0x00: 0x0101, > + 0x01: 0x0000, > + 0x02: 0x0000, > + 0x03: 0x0001, > + 0x04: 0x0000, > + 0x05: 0x0000, > + 0x06: 0x0000, > + 0x07: 0x0000, > + 0x08: 0x0000, > + 0x09: 0x0000, > + 0x0A: 0x0000, > + 0x0A: 0x0000, > + 0x0B: 0x0000, > + 0x0C: 0x0186, > + # The driver reads this register which is undefined for > + # VCNL4040. Perhaps the driver should be fixed instead > + # of having this here? > + 0x0E: 0x0000, > + } > + > + def reg_read(self, addr: int) -> int: > + return self.regs[addr] > + > + def reg_write(self, addr: int, val: int) -> None: > + assert addr in self.regs > + self.regs[addr] = val > + > + > +class TestVCNL4040(UMLTestCase): > + dts = DtFragment( > + src=""" > +&i2c { > + light-sensor@$addr$ { > + compatible = "vishay,vcnl4040"; > + reg = <0x$addr$>; > + }; > +}; > + """, > + variables={ > + "addr": DtVar.I2C_ADDR, > + }, > + ) > + > + @classmethod > + def setUpClass(cls) -> None: > + insmod("vcnl4000") > + > + @classmethod > + def tearDownClass(cls) -> None: > + rmmod("vcnl4000") > + > + def setUp(self) -> None: > + self.driver = I2CDriver("vcnl4000") > + self.hw = Hardware("i2c") > + self.hw.load_model(VCNL4040) > + > + def tearDown(self) -> None: > + self.hw.close() > + > + def test_illuminance_scale(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + scalefile = dev.path / "iio:device0/in_illuminance_scale" > + # The datasheet says 0.10 lux/step, but the driver follows > + # the application note "Designing the VCNL4040 Into an > + # Application" which claims a different value. > + self.assertEqual(read_float(scalefile), 0.12) > + > + def test_illuminance(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + luxfile = dev.path / "iio:device0/in_illuminance_raw" > + > + data = [0x0000, 0x1234, 0xFFFF] > + for regval in data: > + self.hw.reg_write(0x09, regval) > + self.assertEqual(read_int(luxfile), regval) > + > + def test_proximity(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + rawfile = dev.path / "iio:device0/in_proximity_raw" > + > + data = [0x0000, 0x1234, 0xFFFF] > + for regval in data: > + self.hw.reg_write(0x08, regval) > + self.assertEqual(read_int(rawfile), regval) > diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py > new file mode 100644 > index 000000000000..d1cf819e563e > --- /dev/null > +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py > @@ -0,0 +1,96 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# Copyright Axis Communications AB > + > +import logging > +from typing import Any > + > +from roadtest.backend.i2c import SMBusModel > +from roadtest.core.devicetree import DtFragment, DtVar > +from roadtest.core.hardware import Hardware > +from roadtest.core.modules import insmod, rmmod > +from roadtest.core.suite import UMLTestCase > +from roadtest.core.sysfs import I2CDriver, read_float, read_int > + > +logger = logging.getLogger(__name__) > + > + > +class VCNL4200(SMBusModel): > + def __init__(self, **kwargs: Any) -> None: > + super().__init__(regbytes=2, byteorder="little", **kwargs) > + self.regs = { > + 0x00: 0x0101, > + 0x01: 0x0000, > + 0x02: 0x0000, > + 0x03: 0x0001, > + 0x04: 0x0000, > + 0x05: 0x0000, > + 0x06: 0x0000, > + 0x07: 0x0000, > + 0x08: 0x0000, > + 0x09: 0x0000, > + 0x0A: 0x0000, > + 0x0D: 0x0000, > + 0x0E: 0x1058, > + } > + > + def reg_read(self, addr: int) -> int: > + return self.regs[addr] > + > + def reg_write(self, addr: int, val: int) -> None: > + assert addr in self.regs > + self.regs[addr] = val > + > + > +class TestVCNL4200(UMLTestCase): > + dts = DtFragment( > + src=""" > +&i2c { > + light-sensor@$addr$ { > + compatible = "vishay,vcnl4200"; > + reg = <0x$addr$>; > + }; > +}; > + """, > + variables={ > + "addr": DtVar.I2C_ADDR, > + }, > + ) > + > + @classmethod > + def setUpClass(cls) -> None: > + insmod("vcnl4000") > + > + @classmethod > + def tearDownClass(cls) -> None: > + rmmod("vcnl4000") > + > + def setUp(self) -> None: > + self.driver = I2CDriver("vcnl4000") > + self.hw = Hardware("i2c") > + self.hw.load_model(VCNL4200) > + > + def tearDown(self) -> None: > + self.hw.close() > + > + def test_illuminance_scale(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + scalefile = dev.path / "iio:device0/in_illuminance_scale" > + self.assertEqual(read_float(scalefile), 0.024) > + > + def test_illuminance(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + luxfile = dev.path / "iio:device0/in_illuminance_raw" > + > + data = [0x0000, 0x1234, 0xFFFF] > + for regval in data: > + self.hw.reg_write(0x09, regval) > + self.assertEqual(read_int(luxfile), regval) > + > + def test_proximity(self) -> None: > + with self.driver.bind(self.dts["addr"]) as dev: > + rawfile = dev.path / "iio:device0/in_proximity_raw" > + > + data = [0x0000, 0x1234, 0xFFFF] > + for regval in data: > + self.hw.reg_write(0x08, regval) > + self.assertEqual(read_int(rawfile), regval)
On Sun, Mar 20, 2022 at 06:02:53PM +0100, Jonathan Cameron wrote: > Very interesting bit of work. My current approach for similar testing > is to write a qemu model for the hardware, but that currently > requires carefully crafted tests. Most of the time I'm only doing > that to verify refactoring of existing drivers. Thank you for taking a look! > One thing that makes me nervous here is the python element though > as I've not written significant python in about 20 years. > That is going to be a burden for kernel developers and maintainers... > Nothing quite like badly written tests to make for a mess in the long run > and I suspect my python for example would be very very badly written :) There's a bunch of static checkers to ensure that the code follows some basic guidelines, and CI can check that the tests work consistently, and also calculate metrics such as test execution time and code coverage, so even non-idiomatic Python in the tests wouldn't be entirely broken. And unlike driver code, if the tests for a particular driver later do turn out to be bad (in what way?), we could just throw those particular tests out without breaking anybody's system. > Cut and paste will of course get us a long way... Isn't some amount of copy/paste followed by modification to be expected even if the framework is written in say C (just as there's already copy/paste + modification involved when writing drivers)? As for the core logic of individual driver tests excluding the framework bits, I have a hard time imagining what Python syntax looks like to someone with no knowledge of Python, so yes, I guess it's going to be harder to review. > I dream of a world where every driver is testable by people with out hardware > but I fear it may be a while yet. Hopefully this will get us a little > closer! > > I more or less follow what is going on here (good docs btw in the earlier > patch definitely helped). > > So far I'm thoroughly in favour of road test subject to actually being > able to review the tests or getting sufficient support to do so. > It's a 'how to scale it' question really... Would rewriting the framework in C and forcing tests to be written in that language mean that maintainers would be able to review tests without external support?
On Tue, 5 Apr 2022 15:48:05 +0200 Vincent Whitchurch <vincent.whitchurch@axis.com> wrote: > On Sun, Mar 20, 2022 at 06:02:53PM +0100, Jonathan Cameron wrote: > > Very interesting bit of work. My current approach for similar testing > > is to write a qemu model for the hardware, but that currently > > requires carefully crafted tests. Most of the time I'm only doing > > that to verify refactoring of existing drivers. > > Thank you for taking a look! > > > One thing that makes me nervous here is the python element though > > as I've not written significant python in about 20 years. > > That is going to be a burden for kernel developers and maintainers... > > Nothing quite like badly written tests to make for a mess in the long run > > and I suspect my python for example would be very very badly written :) > > There's a bunch of static checkers to ensure that the code follows some > basic guidelines, and CI can check that the tests work consistently, and > also calculate metrics such as test execution time and code coverage, so > even non-idiomatic Python in the tests wouldn't be entirely broken. > > And unlike driver code, if the tests for a particular driver later do > turn out to be bad (in what way?), we could just throw those particular > tests out without breaking anybody's system. True. Though CI test triage folk may disagree ;) > > > Cut and paste will of course get us a long way... > > Isn't some amount of copy/paste followed by modification to be expected > even if the framework is written in say C (just as there's already > copy/paste + modification involved when writing drivers)? > > As for the core logic of individual driver tests excluding the framework > bits, I have a hard time imagining what Python syntax looks like to > someone with no knowledge of Python, so yes, I guess it's going to be > harder to review. I messed around the other day with writing tests for drivers/staging/iio/cdc/ad7746.c and wasn't "too bad" and was useful for verifying some refactoring (and identified a possible precision problem in some integer approximation of floating point calcs) I'll try and find time to flesh that test set out more in the near future and post it so you can see how bad my python is. It amused my wife if nothing else :) However a future project is to see if I can use this to hook up the SPDM attestation stack via mctp over i2c - just because I like to live dangerously :) For IIO use more generally we need a sensible path to SPI (and also platform drivers). For my day job I'd like to mess around with doing PCI devices as well. The PCI DOE support for example would be nice to run against a test set that doesn't involve spinning up QEMU. DOE driver support: https://lore.kernel.org/all/20220330235920.2800929-1-ira.weiny@intel.com/ Effort wise, it's similar effort to hacking equivalent in QEMU but with the obvious advantage of being in tree and simpler for CI systems etc to use. It would be nice to only have to use QEMU for complex system CI tests like the ones we are doing for CXL. > > > I dream of a world where every driver is testable by people with out hardware > > but I fear it may be a while yet. Hopefully this will get us a little > > closer! > > > > I more or less follow what is going on here (good docs btw in the earlier > > patch definitely helped). > > > > So far I'm thoroughly in favour of road test subject to actually being > > able to review the tests or getting sufficient support to do so. > > It's a 'how to scale it' question really... > > Would rewriting the framework in C and forcing tests to be written in > that language mean that maintainers would be able to review tests > without external support? I was wondering that. If we stayed in python I think we'd definitely want someone to be the 'roadtester/tests' maintainer (or group of maintainers) and their Ack to be expected for all tests we upstream. Idea being they'd sanity check correct use of framework and just how bad the python code us C developers are writing is ;) However, we'd still need a good chunk of that 'framework' use review even if doing this in C. Anyhow, very promising bit of work. Thanks, Jonathan
On Wed, Apr 06, 2022 at 03:08:16PM +0200, Jonathan Cameron wrote: > On Tue, 5 Apr 2022 15:48:05 +0200 > Vincent Whitchurch <vincent.whitchurch@axis.com> wrote: > I messed around the other day with writing tests for > drivers/staging/iio/cdc/ad7746.c and wasn't "too bad" and was useful for > verifying some refactoring (and identified a possible precision problem > in some integer approximation of floating point calcs) Good to hear! > I'll try and find time to flesh that test set out more in the near future and > post it so you can see how bad my python is. It amused my wife if nothing > else :) > > However a future project is to see if I can use this to hook up the SPDM > attestation stack via mctp over i2c - just because I like to live dangerously :) > > For IIO use more generally we need a sensible path to SPI (and also platform > drivers). I have SPI working now. I was able to do this without patching the kernel by have the Python code emulate an SC18IS602 I2C-SPI bridge which has an existing driver. There is a limitation of 200 bytes per transaction (in the SC18IS602 driver/chip) so not all SPI drivers will work, but many will, and the underlying backend can be changed later without having to change the test cases. I used this to implement a test for drivers/iio/adc/ti-adc084s021.c. Platform devices are going to take more work. I did do some experiments (using arch/um/drivers/virt-pci.c) a while ago but I need to see how well it works with the rest of the framework in place. > For my day job I'd like to mess around with doing PCI devices > as well. The PCI DOE support for example would be nice to run against a > test set that doesn't involve spinning up QEMU. > DOE driver support: > https://lore.kernel.org/all/20220330235920.2800929-1-ira.weiny@intel.com/ > > Effort wise, it's similar effort to hacking equivalent in QEMU but with the > obvious advantage of being in tree and simpler for CI systems etc to use. > > It would be nice to only have to use QEMU for complex system CI tests > like the ones we are doing for CXL. > > > > > > I dream of a world where every driver is testable by people with out hardware > > > but I fear it may be a while yet. Hopefully this will get us a little > > > closer! > > > > > > I more or less follow what is going on here (good docs btw in the earlier > > > patch definitely helped). > > > > > > So far I'm thoroughly in favour of road test subject to actually being > > > able to review the tests or getting sufficient support to do so. > > > It's a 'how to scale it' question really... > > > > Would rewriting the framework in C and forcing tests to be written in > > that language mean that maintainers would be able to review tests > > without external support? > > I was wondering that. If we stayed in python I think we'd definitely want > someone to be the 'roadtester/tests' maintainer (or group of maintainers) > and their Ack to be expected for all tests we upstream. Idea being they'd > sanity check correct use of framework and just how bad the python code > us C developers are writing is ;) > > However, we'd still need a good chunk of that 'framework' use review even > if doing this in C. I think this is reasonable, especially for the first tests for each subsystem where there will likely be support code and framework bits missing.
diff --git a/tools/testing/roadtest/roadtest/tests/iio/iio.py b/tools/testing/roadtest/roadtest/tests/iio/iio.py new file mode 100644 index 000000000000..ea57b28ea9d3 --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/iio.py @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright Axis Communications AB + +import contextlib +import enum +import fcntl +import struct +from dataclasses import dataclass, field +from typing import Any + +IIO_GET_EVENT_FD_IOCTL = 0x80046990 +IIO_BUFFER_GET_FD_IOCTL = 0xC0046991 + + +class IIOChanType(enum.IntEnum): + IIO_VOLTAGE = 0 + IIO_CURRENT = 1 + IIO_POWER = 2 + IIO_ACCEL = 3 + IIO_ANGL_VEL = 4 + IIO_MAGN = 5 + IIO_LIGHT = 6 + IIO_INTENSITY = 7 + IIO_PROXIMITY = 8 + IIO_TEMP = 9 + IIO_INCLI = 10 + IIO_ROT = 11 + IIO_ANGL = 12 + IIO_TIMESTAMP = 13 + IIO_CAPACITANCE = 14 + IIO_ALTVOLTAGE = 15 + IIO_CCT = 16 + IIO_PRESSURE = 17 + IIO_HUMIDITYRELATIVE = 18 + IIO_ACTIVITY = 19 + IIO_STEPS = 20 + IIO_ENERGY = 21 + IIO_DISTANCE = 22 + IIO_VELOCITY = 23 + IIO_CONCENTRATION = 24 + IIO_RESISTANCE = 25 + IIO_PH = 26 + IIO_UVINDEX = 27 + IIO_ELECTRICALCONDUCTIVITY = 28 + IIO_COUNT = 29 + IIO_INDEX = 30 + IIO_GRAVITY = 31 + IIO_POSITIONRELATIVE = 32 + IIO_PHASE = 33 + IIO_MASSCONCENTRATION = 34 + + +@dataclass +class IIOEvent: + id: int + timestamp: int + type: IIOChanType = field(init=False) + + def __post_init__(self) -> None: + self.type = IIOChanType((self.id >> 32) & 0xFF) + + +class IIOEventMonitor(contextlib.AbstractContextManager): + def __init__(self, devname: str) -> None: + self.devname = devname + + def __enter__(self) -> "IIOEventMonitor": + self.file = open(self.devname, "rb") + + s = struct.Struct("L") + buf = bytearray(s.size) + fcntl.ioctl(self.file.fileno(), IIO_GET_EVENT_FD_IOCTL, buf) + eventfd = s.unpack(buf)[0] + self.eventf = open(eventfd, "rb") + + return self + + def read(self) -> IIOEvent: + s = struct.Struct("Qq") + buf = self.eventf.read(s.size) + return IIOEvent(*s.unpack(buf)) + + def __exit__(self, *_: Any) -> None: + self.eventf.close() + self.file.close() + + +class IIOBuffer(contextlib.AbstractContextManager): + def __init__(self, devname: str, bufidx: int) -> None: + self.devname = devname + self.bufidx = bufidx + + def __enter__(self) -> "IIOBuffer": + self.file = open(self.devname, "rb") + + s = struct.Struct("L") + buf = bytearray(s.size) + s.pack_into(buf, 0, self.bufidx) + fcntl.ioctl(self.file.fileno(), IIO_BUFFER_GET_FD_IOCTL, buf) + eventfd = s.unpack(buf)[0] + self.eventf = open(eventfd, "rb") + + return self + + def read(self, spec: str) -> tuple: + s = struct.Struct(spec) + buf = self.eventf.read(s.size) + return s.unpack(buf) + + def __exit__(self, *_: Any) -> None: + self.eventf.close() + self.file.close() diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/config b/tools/testing/roadtest/roadtest/tests/iio/light/config index b9753f2d0728..3bd4125cbb6b 100644 --- a/tools/testing/roadtest/roadtest/tests/iio/light/config +++ b/tools/testing/roadtest/roadtest/tests/iio/light/config @@ -1 +1,2 @@ CONFIG_OPT3001=m +CONFIG_VCNL4000=m diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py new file mode 100644 index 000000000000..16a5bed18b7e --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright Axis Communications AB + +import errno +import logging +from typing import Any, Final + +from roadtest.backend.i2c import SMBusModel +from roadtest.core.devicetree import DtFragment, DtVar +from roadtest.core.hardware import Hardware +from roadtest.core.modules import insmod, rmmod +from roadtest.core.suite import UMLTestCase +from roadtest.core.sysfs import I2CDriver, read_float, read_int, read_str + +logger = logging.getLogger(__name__) + +REG_COMMAND: Final = 0x80 +REG_PRODUCT_ID_REVISION: Final = 0x81 +REG_IR_LED_CURRENT: Final = 0x83 +REG_ALS_PARAM: Final = 0x84 +REG_ALS_RESULT_HIGH: Final = 0x85 +REG_ALS_RESULT_LOW: Final = 0x86 +REG_PROX_RESULT_HIGH: Final = 0x87 +REG_PROX_RESULT_LOW: Final = 0x88 +REG_PROX_SIGNAL_FREQ: Final = 0x89 + +REG_COMMAND_ALS_DATA_RDY: Final = 1 << 6 +REG_COMMAND_PROX_DATA_RDY: Final = 1 << 5 + + +class VCNL4000(SMBusModel): + def __init__(self, **kwargs: Any) -> None: + super().__init__(regbytes=1, **kwargs) + self.regs = { + REG_COMMAND: 0b_1000_0000, + REG_PRODUCT_ID_REVISION: 0x11, + # Register "without function in current version" + 0x82: 0x00, + REG_IR_LED_CURRENT: 0x00, + REG_ALS_PARAM: 0x00, + REG_ALS_RESULT_HIGH: 0x00, + REG_ALS_RESULT_LOW: 0x00, + REG_PROX_RESULT_HIGH: 0x00, + REG_PROX_RESULT_LOW: 0x00, + REG_PROX_RESULT_LOW: 0x00, + } + + def reg_read(self, addr: int) -> int: + val = self.regs[addr] + + if addr in (REG_ALS_RESULT_HIGH, REG_ALS_RESULT_LOW): + self.regs[REG_COMMAND] &= ~REG_COMMAND_ALS_DATA_RDY + if addr in (REG_PROX_RESULT_HIGH, REG_PROX_RESULT_LOW): + self.regs[REG_COMMAND] &= ~REG_COMMAND_PROX_DATA_RDY + + return val + + def reg_write(self, addr: int, val: int) -> None: + assert addr in self.regs + + if addr == REG_COMMAND: + rw = 0b_0001_1000 + val = (self.regs[addr] & ~rw) | (val & rw) + + self.regs[addr] = val + + def inject(self, addr: int, val: int, mask: int = ~0) -> None: + old = self.regs[addr] & ~mask + new = old | (val & mask) + self.regs[addr] = new + + +class TestVCNL4000(UMLTestCase): + dts = DtFragment( + src=""" +&i2c { + light-sensor@$addr$ { + compatible = "vishay,vcnl4000"; + reg = <0x$addr$>; + }; +}; + """, + variables={ + "addr": DtVar.I2C_ADDR, + }, + ) + + @classmethod + def setUpClass(cls) -> None: + insmod("vcnl4000") + + @classmethod + def tearDownClass(cls) -> None: + rmmod("vcnl4000") + + def setUp(self) -> None: + self.driver = I2CDriver("vcnl4000") + self.hw = Hardware("i2c") + self.hw.load_model(VCNL4000) + + def tearDown(self) -> None: + self.hw.close() + + def test_lux(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + scale = read_float(dev.path / "iio:device0/in_illuminance_scale") + self.assertEqual(scale, 0.25) + + data = [ + (0x00, 0x00), + (0x12, 0x34), + (0xFF, 0xFF), + ] + luxfile = dev.path / "iio:device0/in_illuminance_raw" + for high, low in data: + self.hw.inject(REG_ALS_RESULT_HIGH, high) + self.hw.inject(REG_ALS_RESULT_LOW, low) + self.hw.inject( + REG_COMMAND, + val=REG_COMMAND_ALS_DATA_RDY, + mask=REG_COMMAND_ALS_DATA_RDY, + ) + + self.assertEqual(read_int(luxfile), high << 8 | low) + + def test_lux_timeout(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + # self.hw.set_never_ready(True) + with self.assertRaises(OSError) as cm: + luxfile = dev.path / "iio:device0/in_illuminance_raw" + read_str(luxfile) + self.assertEqual(cm.exception.errno, errno.EIO) diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py new file mode 100644 index 000000000000..929db970405f --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright Axis Communications AB + +import errno +import logging +from pathlib import Path +from typing import Any, Final, Optional + +from roadtest.backend.i2c import SMBusModel +from roadtest.core.devicetree import DtFragment, DtVar +from roadtest.core.hardware import Hardware +from roadtest.core.modules import insmod, rmmod +from roadtest.core.suite import UMLTestCase +from roadtest.core.sysfs import ( + I2CDriver, + read_float, + read_int, + read_str, + write_int, + write_str, +) +from roadtest.tests.iio import iio + +logger = logging.getLogger(__name__) + +REG_COMMAND: Final = 0x80 +REG_PRODUCT_ID_REVISION: Final = 0x81 +REG_PROXIMITY_RATE: Final = 0x82 +REG_IR_LED_CURRENT: Final = 0x83 +REG_ALS_PARAM: Final = 0x84 +REG_ALS_RESULT_HIGH: Final = 0x85 +REG_ALS_RESULT_LOW: Final = 0x86 +REG_PROX_RESULT_HIGH: Final = 0x87 +REG_PROX_RESULT_LOW: Final = 0x88 +REG_INTERRUPT_CONTROL: Final = 0x89 +REG_LOW_THRESHOLD_HIGH: Final = 0x8A +REG_LOW_THRESHOLD_LOW: Final = 0x8B +REG_HIGH_THRESHOLD_HIGH: Final = 0x8C +REG_HIGH_THRESHOLD_LOW: Final = 0x8D +REG_INTERRUPT_STATUS: Final = 0x8E + +REG_COMMAND_ALS_DATA_RDY: Final = 1 << 6 +REG_COMMAND_PROX_DATA_RDY: Final = 1 << 5 + + +class VCNL4010(SMBusModel): + def __init__(self, int: Optional[int] = None, **kwargs: Any) -> None: + super().__init__(regbytes=1, **kwargs) + self.int = int + self._set_int(False) + self.regs = { + REG_COMMAND: 0b_1000_0000, + REG_PRODUCT_ID_REVISION: 0x21, + REG_PROXIMITY_RATE: 0x00, + REG_IR_LED_CURRENT: 0x00, + REG_ALS_PARAM: 0x00, + REG_ALS_RESULT_HIGH: 0x00, + REG_ALS_RESULT_LOW: 0x00, + REG_PROX_RESULT_HIGH: 0x00, + REG_PROX_RESULT_LOW: 0x00, + REG_INTERRUPT_CONTROL: 0x00, + REG_LOW_THRESHOLD_HIGH: 0x00, + REG_LOW_THRESHOLD_LOW: 0x00, + REG_HIGH_THRESHOLD_HIGH: 0x00, + REG_HIGH_THRESHOLD_LOW: 0x00, + REG_INTERRUPT_STATUS: 0x00, + } + + def _set_int(self, active: int) -> None: + # Active-low + self.backend.gpio.set(self.int, not active) + + def _update_irq(self) -> None: + selftimed_en = self.regs[REG_COMMAND] & (1 << 0) + prox_en = self.regs[REG_COMMAND] & (1 << 1) + prox_data_rdy = self.regs[REG_COMMAND] & REG_COMMAND_PROX_DATA_RDY + int_prox_ready_en = self.regs[REG_INTERRUPT_CONTROL] & (1 << 3) + + logger.debug( + f"{selftimed_en=:x} {prox_en=:x} {prox_data_rdy=:x} {int_prox_ready_en=:x}" + ) + + if selftimed_en and prox_en and prox_data_rdy and int_prox_ready_en: + self.regs[REG_INTERRUPT_STATUS] |= 1 << 3 + + low_threshold = ( + self.regs[REG_LOW_THRESHOLD_HIGH] << 8 | self.regs[REG_LOW_THRESHOLD_LOW] + ) + high_threshold = ( + self.regs[REG_HIGH_THRESHOLD_HIGH] << 8 | self.regs[REG_HIGH_THRESHOLD_LOW] + ) + proximity = ( + self.regs[REG_PROX_RESULT_HIGH] << 8 | self.regs[REG_PROX_RESULT_LOW] + ) + int_thres_en = self.regs[REG_INTERRUPT_CONTROL] & (1 << 1) + + logger.debug( + f"{low_threshold=:x} {high_threshold=:x} {proximity=:x} {int_thres_en=:x}" + ) + + if int_thres_en: + if proximity < low_threshold: + logger.debug("LOW") + self.regs[REG_INTERRUPT_STATUS] |= 1 << 1 + if proximity > high_threshold: + logger.debug("HIGH") + self.regs[REG_INTERRUPT_STATUS] |= 1 << 0 + + self._set_int(self.regs[REG_INTERRUPT_STATUS]) + + def reg_read(self, addr: int) -> int: + val = self.regs[addr] + + if addr in (REG_ALS_RESULT_HIGH, REG_ALS_RESULT_LOW): + self.regs[REG_COMMAND] &= ~REG_COMMAND_ALS_DATA_RDY + if addr in (REG_PROX_RESULT_HIGH, REG_PROX_RESULT_LOW): + self.regs[REG_COMMAND] &= ~REG_COMMAND_PROX_DATA_RDY + + return val + + def reg_write(self, addr: int, val: int) -> None: + assert addr in self.regs + + if addr == REG_COMMAND: + rw = 0b_0001_1111 + val = (self.regs[addr] & ~rw) | (val & rw) + elif addr == REG_INTERRUPT_STATUS: + val = self.regs[addr] & ~(val & 0xF) + + self.regs[addr] = val + self._update_irq() + + def inject(self, addr: int, val: int, mask: int = ~0) -> None: + old = self.regs[addr] & ~mask + new = old | (val & mask) + self.regs[addr] = new + self._update_irq() + + def set_bit(self, addr: int, val: int) -> None: + self.inject(addr, val, val) + + +class TestVCNL4010(UMLTestCase): + dts = DtFragment( + src=""" +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c { + light-sensor@$addr$ { + compatible = "vishay,vcnl4020"; + reg = <0x$addr$>; + interrupt-parent = <&gpio>; + interrupts = <$gpio$ IRQ_TYPE_EDGE_FALLING>; + }; +}; + """, + variables={ + "addr": DtVar.I2C_ADDR, + "gpio": DtVar.GPIO_PIN, + }, + ) + + @classmethod + def setUpClass(cls) -> None: + insmod("vcnl4000") + + @classmethod + def tearDownClass(cls) -> None: + rmmod("vcnl4000") + + def setUp(self) -> None: + self.driver = I2CDriver("vcnl4000") + self.hw = Hardware("i2c") + self.hw.load_model(VCNL4010, int=self.dts["gpio"]) + + def tearDown(self) -> None: + self.hw.close() + + def test_lux(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + + scale = read_float(dev.path / "iio:device0/in_illuminance_scale") + self.assertEqual(scale, 0.25) + + data = [ + (0x00, 0x00), + (0x12, 0x34), + (0xFF, 0xFF), + ] + luxfile = dev.path / "iio:device0/in_illuminance_raw" + for high, low in data: + self.hw.inject(REG_ALS_RESULT_HIGH, high) + self.hw.inject(REG_ALS_RESULT_LOW, low) + self.hw.set_bit(REG_COMMAND, REG_COMMAND_ALS_DATA_RDY) + + self.assertEqual(read_int(luxfile), high << 8 | low) + + def test_lux_timeout(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + with self.assertRaises(OSError) as cm: + luxfile = dev.path / "iio:device0/in_illuminance_raw" + read_str(luxfile) + self.assertEqual(cm.exception.errno, errno.EIO) + + def test_proximity_thresh_rising(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + high_thresh = ( + dev.path / "iio:device0/events/in_proximity_thresh_rising_value" + ) + write_int(high_thresh, 0x1234) + + mock = self.hw.update_mock() + mock.assert_last_reg_write(self, REG_HIGH_THRESHOLD_HIGH, 0x12) + mock.assert_last_reg_write(self, REG_HIGH_THRESHOLD_LOW, 0x34) + mock.reset_mock() + + self.assertEqual(read_int(high_thresh), 0x1234) + + with iio.IIOEventMonitor("/dev/iio:device0") as mon: + en = dev.path / "iio:device0/events/in_proximity_thresh_either_en" + write_int(en, 1) + + self.hw.inject(REG_PROX_RESULT_HIGH, 0x12) + self.hw.inject(REG_PROX_RESULT_LOW, 0x35) + self.hw.set_bit(REG_COMMAND, REG_COMMAND_PROX_DATA_RDY) + self.hw.kick() + + self.assertEqual(read_int(en), 1) + + event = mon.read() + self.assertEqual(event.type, iio.IIOChanType.IIO_PROXIMITY) + + def test_proximity_thresh_falling(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + high_thresh = ( + dev.path / "iio:device0/events/in_proximity_thresh_falling_value" + ) + write_int(high_thresh, 0x0ABC) + + mock = self.hw.update_mock() + mock.assert_last_reg_write(self, REG_LOW_THRESHOLD_HIGH, 0x0A) + mock.assert_last_reg_write(self, REG_LOW_THRESHOLD_LOW, 0xBC) + mock.reset_mock() + + self.assertEqual(read_int(high_thresh), 0x0ABC) + + with iio.IIOEventMonitor("/dev/iio:device0") as mon: + write_int( + dev.path / "iio:device0/events/in_proximity_thresh_either_en", 1 + ) + + event = mon.read() + self.assertEqual(event.type, iio.IIOChanType.IIO_PROXIMITY) + + def test_proximity_triggered(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + data = [ + (0x00, 0x00, 0), + (0x00, 0x01, 1), + (0xF0, 0x02, 0xF002), + (0xFF, 0xFF, 0xFFFF), + ] + + trigger = read_str(Path("/sys/bus/iio/devices/trigger0/name")) + + write_int(dev.path / "iio:device0/buffer0/in_proximity_en", 1) + write_str(dev.path / "iio:device0/trigger/current_trigger", trigger) + + with iio.IIOBuffer("/dev/iio:device0", bufidx=0) as buffer: + write_int(dev.path / "iio:device0/buffer0/length", 128) + write_int(dev.path / "iio:device0/buffer0/enable", 1) + + for low, high, expected in data: + self.hw.inject(REG_PROX_RESULT_HIGH, low) + self.hw.inject(REG_PROX_RESULT_LOW, high) + self.hw.set_bit(REG_COMMAND, REG_COMMAND_PROX_DATA_RDY) + self.hw.kick() + + scanline = buffer.read("H") + + val = scanline[0] + self.assertEqual(val, expected) diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py new file mode 100644 index 000000000000..f2aa2cb9f3d5 --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright Axis Communications AB + +import logging +from typing import Any + +from roadtest.backend.i2c import SMBusModel +from roadtest.core.devicetree import DtFragment, DtVar +from roadtest.core.hardware import Hardware +from roadtest.core.modules import insmod, rmmod +from roadtest.core.suite import UMLTestCase +from roadtest.core.sysfs import I2CDriver, read_float, read_int + +logger = logging.getLogger(__name__) + + +class VCNL4040(SMBusModel): + def __init__(self, **kwargs: Any) -> None: + super().__init__(regbytes=2, byteorder="little", **kwargs) + self.regs = { + 0x00: 0x0101, + 0x01: 0x0000, + 0x02: 0x0000, + 0x03: 0x0001, + 0x04: 0x0000, + 0x05: 0x0000, + 0x06: 0x0000, + 0x07: 0x0000, + 0x08: 0x0000, + 0x09: 0x0000, + 0x0A: 0x0000, + 0x0A: 0x0000, + 0x0B: 0x0000, + 0x0C: 0x0186, + # The driver reads this register which is undefined for + # VCNL4040. Perhaps the driver should be fixed instead + # of having this here? + 0x0E: 0x0000, + } + + def reg_read(self, addr: int) -> int: + return self.regs[addr] + + def reg_write(self, addr: int, val: int) -> None: + assert addr in self.regs + self.regs[addr] = val + + +class TestVCNL4040(UMLTestCase): + dts = DtFragment( + src=""" +&i2c { + light-sensor@$addr$ { + compatible = "vishay,vcnl4040"; + reg = <0x$addr$>; + }; +}; + """, + variables={ + "addr": DtVar.I2C_ADDR, + }, + ) + + @classmethod + def setUpClass(cls) -> None: + insmod("vcnl4000") + + @classmethod + def tearDownClass(cls) -> None: + rmmod("vcnl4000") + + def setUp(self) -> None: + self.driver = I2CDriver("vcnl4000") + self.hw = Hardware("i2c") + self.hw.load_model(VCNL4040) + + def tearDown(self) -> None: + self.hw.close() + + def test_illuminance_scale(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + scalefile = dev.path / "iio:device0/in_illuminance_scale" + # The datasheet says 0.10 lux/step, but the driver follows + # the application note "Designing the VCNL4040 Into an + # Application" which claims a different value. + self.assertEqual(read_float(scalefile), 0.12) + + def test_illuminance(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + luxfile = dev.path / "iio:device0/in_illuminance_raw" + + data = [0x0000, 0x1234, 0xFFFF] + for regval in data: + self.hw.reg_write(0x09, regval) + self.assertEqual(read_int(luxfile), regval) + + def test_proximity(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + rawfile = dev.path / "iio:device0/in_proximity_raw" + + data = [0x0000, 0x1234, 0xFFFF] + for regval in data: + self.hw.reg_write(0x08, regval) + self.assertEqual(read_int(rawfile), regval) diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py new file mode 100644 index 000000000000..d1cf819e563e --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright Axis Communications AB + +import logging +from typing import Any + +from roadtest.backend.i2c import SMBusModel +from roadtest.core.devicetree import DtFragment, DtVar +from roadtest.core.hardware import Hardware +from roadtest.core.modules import insmod, rmmod +from roadtest.core.suite import UMLTestCase +from roadtest.core.sysfs import I2CDriver, read_float, read_int + +logger = logging.getLogger(__name__) + + +class VCNL4200(SMBusModel): + def __init__(self, **kwargs: Any) -> None: + super().__init__(regbytes=2, byteorder="little", **kwargs) + self.regs = { + 0x00: 0x0101, + 0x01: 0x0000, + 0x02: 0x0000, + 0x03: 0x0001, + 0x04: 0x0000, + 0x05: 0x0000, + 0x06: 0x0000, + 0x07: 0x0000, + 0x08: 0x0000, + 0x09: 0x0000, + 0x0A: 0x0000, + 0x0D: 0x0000, + 0x0E: 0x1058, + } + + def reg_read(self, addr: int) -> int: + return self.regs[addr] + + def reg_write(self, addr: int, val: int) -> None: + assert addr in self.regs + self.regs[addr] = val + + +class TestVCNL4200(UMLTestCase): + dts = DtFragment( + src=""" +&i2c { + light-sensor@$addr$ { + compatible = "vishay,vcnl4200"; + reg = <0x$addr$>; + }; +}; + """, + variables={ + "addr": DtVar.I2C_ADDR, + }, + ) + + @classmethod + def setUpClass(cls) -> None: + insmod("vcnl4000") + + @classmethod + def tearDownClass(cls) -> None: + rmmod("vcnl4000") + + def setUp(self) -> None: + self.driver = I2CDriver("vcnl4000") + self.hw = Hardware("i2c") + self.hw.load_model(VCNL4200) + + def tearDown(self) -> None: + self.hw.close() + + def test_illuminance_scale(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + scalefile = dev.path / "iio:device0/in_illuminance_scale" + self.assertEqual(read_float(scalefile), 0.024) + + def test_illuminance(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + luxfile = dev.path / "iio:device0/in_illuminance_raw" + + data = [0x0000, 0x1234, 0xFFFF] + for regval in data: + self.hw.reg_write(0x09, regval) + self.assertEqual(read_int(luxfile), regval) + + def test_proximity(self) -> None: + with self.driver.bind(self.dts["addr"]) as dev: + rawfile = dev.path / "iio:device0/in_proximity_raw" + + data = [0x0000, 0x1234, 0xFFFF] + for regval in data: + self.hw.reg_write(0x08, regval) + self.assertEqual(read_int(rawfile), regval)
Add roadtests for the vcnl4000 driver, testing several of the driver's features including buffer and event handling. Since it's the first IIO roadtest testing the non-sysfs parts, some support code for using the IIO ABI is included. The different variants supported by the driver are in separate tests and models since no two variants have fully identical register interfaces. This duplicates some of the test code, but it: - Avoids the tests duplicating the same multi-variant logic as the driver, reducing the risk for both the test and the driver being wrong. - Allows each variant's test and model to be individually understood and modified looking at only one specific datasheet, making it easier to extend tests and implement new features in the driver. During development of these tests, two oddities were noticed in the driver's handling of VCNL4040, but the tests simply assume that the current driver knows what it's doing (although we may want to fix the first point later): - The driver reads an invalid/undefined register on the VCNL4040 when attempting to distinguish between that one and VCNL4200. - The driver uses a lux/step unit which differs from the datasheet (but which is specified in an application note). Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> --- .../roadtest/roadtest/tests/iio/iio.py | 112 +++++++ .../roadtest/roadtest/tests/iio/light/config | 1 + .../roadtest/tests/iio/light/test_vcnl4000.py | 132 ++++++++ .../roadtest/tests/iio/light/test_vcnl4010.py | 282 ++++++++++++++++++ .../roadtest/tests/iio/light/test_vcnl4040.py | 104 +++++++ .../roadtest/tests/iio/light/test_vcnl4200.py | 96 ++++++ 6 files changed, 727 insertions(+) create mode 100644 tools/testing/roadtest/roadtest/tests/iio/iio.py create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4000.py create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4010.py create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4040.py create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_vcnl4200.py