diff mbox

[01/19] Documentation: devicetree: standardize/consolidate on "wakeup-source" property

Message ID 1445422216-29375-2-git-send-email-sudeep.holla@arm.com
State Accepted
Commit a68eee4c748c006daae6b06c9c5bb85be77724f6
Headers show

Commit Message

Sudeep Holla Oct. 21, 2015, 10:09 a.m. UTC 
Currently different drivers use multiple forms of annotating devices
that should be set up as wakeup sources for the system.

This patch adds a separate binding document inorder to standardize and
consolidate to use "wakeup-source" boolean property to mark the devices
as wakeup capable.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 .../devicetree/bindings/power/wakeup-source.txt    | 71 ++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/wakeup-source.txt

Comments

Rob Herring Oct. 21, 2015, 10:02 p.m. UTC | #1 
On Wed, Oct 21, 2015 at 5:09 AM, Sudeep Holla <sudeep.holla@arm.com> wrote:
> Currently different drivers use multiple forms of annotating devices
> that should be set up as wakeup sources for the system.
>
> This patch adds a separate binding document inorder to standardize and
> consolidate to use "wakeup-source" boolean property to mark the devices
> as wakeup capable.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Looks good to me.

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  .../devicetree/bindings/power/wakeup-source.txt    | 71 ++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/wakeup-source.txt
>
> diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
> new file mode 100644
> index 000000000000..963c6dfd484d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
> @@ -0,0 +1,71 @@
> +Specifying wakeup capability for devices
> +============================================
> +
> +Any device nodes
> +----------------
> +Nodes that describe devices which has wakeup capability must contain an
> +"wakeup-source" boolean property.
> +
> +Also, if device is marked as a wakeup source, then all the primary
> +interrupt(s) can be used as wakeup interrupt(s).
> +
> +However if the devices have dedicated interrupt as the wakeup source
> +then they need to specify/identify the same using device specific
> +interrupt name. In such cases only that interrupt can be used as wakeup
> +interrupt.
> +
> +List of legacy properties and respective binding document
> +---------------------------------------------------------
> +
> +1. "enable-sdio-wakeup"                Documentation/devicetree/bindings/mmc/mmc.txt
> +2. "gpio-key,wakeup"           Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
> +3. "has-tpo"                   Documentation/devicetree/bindings/rtc/rtc-opal.txt
> +4. "isil,irq2-can-wakeup-machine" Documentation/devicetree/bindings/rtc/isil,isl12057.txt
> +5. "linux,wakeup"              Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
> +                               Documentation/devicetree/bindings/mfd/tc3589x.txt
> +                               Documentation/devicetree/bindings/input/ads7846.txt
> +6. "linux,keypad-wakeup"       Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
> +7. "linux,input-wakeup"                Documentation/devicetree/bindings/input/samsung-keypad.txt
> +8. "nvidia,wakeup-source"      Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
> +
> +Examples
> +--------
> +
> +1. With "wakeup" interrupt name
> +
> +       device@10000 {
> +               compatible      = "vendor,device-id";
> +               reg             = <0x10000 0x1000>;
> +               interrupts      = <0 19 4>, <0 21 4>, <0 22 4>;
> +               interrupt-names = "ack", "err", "wakeup";
> +               wakeup-source;
> +       };
> +
> +2. Without "wakeup" interrupt name
> +
> +       embedded-controller {
> +               compatible = "google,cros-ec-i2c";
> +               reg = <0x1e>;
> +               interrupts = <6 0>;
> +               interrupt-parent = <&gpx1>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&ec_irq>;
> +               wakeup-source;
> +       };
> +
> +3. Without interrupts
> +
> +       gpio_keys {
> +               compatible = "gpio-keys";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               button@1 {
> +                       debounce_interval = <50>;
> +                       wakeup-source;
> +                       linux,code = <116>;
> +                       label = "POWER";
> +                       gpios = <&iofpga_gpio0 0 0x4>;
> +               };
> +               [....]
> +       };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
new file mode 100644
index 000000000000..963c6dfd484d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -0,0 +1,71 @@ 
+Specifying wakeup capability for devices
+============================================
+
+Any device nodes
+----------------
+Nodes that describe devices which has wakeup capability must contain an
+"wakeup-source" boolean property.
+
+Also, if device is marked as a wakeup source, then all the primary
+interrupt(s) can be used as wakeup interrupt(s).
+
+However if the devices have dedicated interrupt as the wakeup source
+then they need to specify/identify the same using device specific
+interrupt name. In such cases only that interrupt can be used as wakeup
+interrupt.
+
+List of legacy properties and respective binding document
+---------------------------------------------------------
+
+1. "enable-sdio-wakeup"		Documentation/devicetree/bindings/mmc/mmc.txt
+2. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
+3. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
+4. "isil,irq2-can-wakeup-machine" Documentation/devicetree/bindings/rtc/isil,isl12057.txt
+5. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+				Documentation/devicetree/bindings/mfd/tc3589x.txt
+				Documentation/devicetree/bindings/input/ads7846.txt
+6. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+7. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+8. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+
+Examples
+--------
+
+1. With "wakeup" interrupt name
+
+	device@10000 {
+		compatible	= "vendor,device-id";
+		reg		= <0x10000 0x1000>;
+		interrupts	= <0 19 4>, <0 21 4>, <0 22 4>;
+		interrupt-names	= "ack", "err", "wakeup";
+		wakeup-source;
+	};
+
+2. Without "wakeup" interrupt name
+
+	embedded-controller {
+		compatible = "google,cros-ec-i2c";
+		reg = <0x1e>;
+		interrupts = <6 0>;
+		interrupt-parent = <&gpx1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_irq>;
+		wakeup-source;
+	};
+
+3. Without interrupts
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup-source;
+			linux,code = <116>;
+			label = "POWER";
+			gpios = <&iofpga_gpio0 0 0x4>;
+		};
+		[....]
+	};