diff mbox

[v4,2/6] remoteproc: debugfs: Add ability to boot remote processor using debugfs

Message ID 1445428027-26174-3-git-send-email-lee.jones@linaro.org
State Accepted
Commit 69e50479bd6b99a377223104be46f7b894ca4208
Headers show

Commit Message

Lee Jones Oct. 21, 2015, 11:47 a.m. UTC 
This functionality is especially useful during the testing phase.  When
used in conjunction with Mailbox's Test Framework we can trivially conduct
end-to-end testing i.e. boot co-processor, send and receive messages to
the co-processor, then shut it down again (repeat as required).

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/remoteproc/remoteproc_debugfs.c | 34 +++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)
diff mbox

Patch

diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 9d30809..8113c18 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -88,8 +88,42 @@  static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
 	return simple_read_from_buffer(userbuf, count, ppos, buf, i);
 }
 
+static ssize_t rproc_state_write(struct file *filp, const char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	struct rproc *rproc = filp->private_data;
+	char buf[10];
+	int ret;
+
+	if (count > sizeof(buf))
+		return count;
+
+	ret = copy_from_user(buf, userbuf, count);
+	if (ret)
+		return -EFAULT;
+
+	if (buf[count - 1] == '\n')
+		buf[count - 1] = '\0';
+
+	if (!strncmp(buf, "start", count)) {
+		ret = rproc_boot(rproc);
+		if (ret) {
+			dev_err(&rproc->dev, "Boot failed: %d\n", ret);
+			return ret;
+		}
+	} else if (!strncmp(buf, "stop", count)) {
+		rproc_shutdown(rproc);
+	} else {
+		dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
+		return -EINVAL;
+	}
+
+	return count;
+}
+
 static const struct file_operations rproc_state_ops = {
 	.read = rproc_state_read,
+	.write = rproc_state_write,
 	.open = simple_open,
 	.llseek	= generic_file_llseek,
 };