diff mbox series

[v4,2/2] arm64: dts: qcom: sa8155: Enable PCIe nodes

Message ID 20220326055754.1796146-3-bhupesh.sharma@linaro.org
State Accepted
Commit 03d470ce2b70f269cecf2aeacee41e228cafde44
Headers show
Series [v4,1/2] dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC | expand

Commit Message

Bhupesh Sharma March 26, 2022, 5:57 a.m. UTC 
SA8155p ADP board supports the PCIe0 controller in the RC
mode (only). So add the support for the same.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 8756c2b25c7e..676e4fe3f848 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -387,6 +387,21 @@  &usb_2_qmpphy {
 	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
 };
 
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l18c_0p88>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l18c_0p88>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>;