@@ -86,6 +86,13 @@ probe the BIOS on your machine and discover the appropriate codes.
Again, when you find new codes, we'd be happy to have your patches!
+``thermal`` interface
+---------------------------
+
+The driver also exports the fans as thermal cooling devices with
+``type`` set to ``dell-smm-fan``. This allows for easy fan control
+using one of the thermal governors.
+
Module parameters
-----------------
@@ -29,6 +29,7 @@
#include <linux/seq_file.h>
#include <linux/string.h>
#include <linux/smp.h>
+#include <linux/thermal.h>
#include <linux/types.h>
#include <linux/uaccess.h>
@@ -80,6 +81,11 @@ struct dell_smm_data {
int *fan_nominal_speed[DELL_SMM_NO_FANS];
};
+struct dell_smm_cooling_data {
+ u8 fan_num;
+ struct dell_smm_data *data;
+};
+
MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
@@ -638,9 +644,50 @@ static void __init i8k_init_procfs(struct device *dev)
#endif
-/*
- * Hwmon interface
- */
+static int dell_smm_get_max_state(struct thermal_cooling_device *dev, unsigned long *state)
+{
+ struct dell_smm_cooling_data *cdata = dev->devdata;
+
+ *state = cdata->data->i8k_fan_max;
+
+ return 0;
+}
+
+static int dell_smm_get_cur_state(struct thermal_cooling_device *dev, unsigned long *state)
+{
+ struct dell_smm_cooling_data *cdata = dev->devdata;
+ int ret;
+
+ ret = i8k_get_fan_speed(cdata->data, cdata->fan_num);
+ if (ret < 0)
+ return ret;
+
+ *state = ret;
+
+ return 0;
+}
+
+static int dell_smm_set_cur_state(struct thermal_cooling_device *dev, unsigned long state)
+{
+ struct dell_smm_cooling_data *cdata = dev->devdata;
+ struct dell_smm_data *data = cdata->data;
+ int ret;
+
+ if (state > data->i8k_fan_max)
+ return -EINVAL;
+
+ mutex_lock(&data->i8k_mutex);
+ ret = i8k_set_fan(data, cdata->fan_num, (int)state);
+ mutex_unlock(&data->i8k_mutex);
+
+ return ret;
+}
+
+static const struct thermal_cooling_device_ops dell_smm_cooling_ops = {
+ .get_max_state = dell_smm_get_max_state,
+ .get_cur_state = dell_smm_get_cur_state,
+ .set_cur_state = dell_smm_set_cur_state,
+};
static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr,
int channel)
@@ -944,6 +991,8 @@ static const struct hwmon_chip_info dell_smm_chip_info = {
static int __init dell_smm_init_hwmon(struct device *dev)
{
struct dell_smm_data *data = dev_get_drvdata(dev);
+ struct thermal_cooling_device *cdev;
+ struct dell_smm_cooling_data *cdata;
struct device *dell_smm_hwmon_dev;
int state, err;
u8 i;
@@ -967,6 +1016,19 @@ static int __init dell_smm_init_hwmon(struct device *dev)
continue;
data->fan[i] = true;
+
+ /* the cooling device it not critical, ignore failures */
+ cdata = devm_kmalloc(dev, sizeof(*cdata), GFP_KERNEL);
+ if (cdata) {
+ cdata->fan_num = i;
+ cdata->data = data;
+ cdev = devm_thermal_of_cooling_device_register(dev, NULL, "dell-smm-fan",
+ cdata,
+ &dell_smm_cooling_ops);
+ if (IS_ERR(cdev))
+ devm_kfree(dev, cdata);
+ }
+
data->fan_nominal_speed[i] = devm_kmalloc_array(dev, data->i8k_fan_max + 1,
sizeof(*data->fan_nominal_speed[i]),
GFP_KERNEL);
Until now, only the temperature sensors where exported thru the thermal subsystem. Export the fans as "dell-smm-fan" too to make them available as cooling devices. This could be a potential successor of the nonstandard procfs interface currently provided by the driver. Also update Documentation. Signed-off-by: Armin Wolf <W_Armin@gmx.de> --- Documentation/hwmon/dell-smm-hwmon.rst | 7 +++ drivers/hwmon/dell-smm-hwmon.c | 68 ++++++++++++++++++++++++-- 2 files changed, 72 insertions(+), 3 deletions(-) -- 2.30.2