diff mbox series

[v2,1/2] spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema

Message ID 20220331160248.716234-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit 5bdcae1fe1c567c08e8bb7ef20fc70d0b70d5fc4
Headers show
Series [v2,1/2] spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema | expand

Commit Message

Krzysztof Kozlowski March 31, 2022, 4:02 p.m. UTC
Convert the GENI based Qualcomm Universal Peripheral (QUP) Serial
Peripheral Interface (SPI) bindings to DT Schema.

The original bindings in TXT were not complete, so add during conversion
properties already used in DTS and/or in the driver: reg-names, dmas,
interconnects, operating points and power-domains.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. Correct $ref path and remove interconnect minItems (Kuldeep).
2. Remove child tpm device from example.
3. Pad reg hex addresses with 00.
---
 .../bindings/spi/qcom,spi-geni-qcom.txt       |  39 ------
 .../bindings/spi/qcom,spi-geni-qcom.yaml      | 120 ++++++++++++++++++
 2 files changed, 120 insertions(+), 39 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
 create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml

Comments

Krzysztof Kozlowski April 1, 2022, 2:28 p.m. UTC | #1
On 01/04/2022 15:52, Kuldeep Singh wrote:
> On Thu, Mar 31, 2022 at 09:40:08PM +0200, Krzysztof Kozlowski wrote:
>> On 31/03/2022 19:58, Kuldeep Singh wrote:
>>> On Thu, Mar 31, 2022 at 06:02:47PM +0200, Krzysztof Kozlowski wrote:
>>>> Convert the GENI based Qualcomm Universal Peripheral (QUP) Serial
>>>> Peripheral Interface (SPI) bindings to DT Schema.
>>>>
>>>> The original bindings in TXT were not complete, so add during conversion
>>>> properties already used in DTS and/or in the driver: reg-names, dmas,
>>>> interconnects, operating points and power-domains.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> [...]
> 
>>>> +  reg:
>>>> +    maxItems: 1
>>>> +
>>>> +  reg-names:
>>>> +    const: se
>>>
>>> Why reg-names is required?
>>> Reg contain max 1 value, we can skip reg-names like other users.
>>>
>>> Also, "se" is used as clock name and using it again for reg-names?
>>> I think this is wrong and reg-names shouldn't be documented.
>>
>> reg-names are not required. If you ask why they are documented? As I
>> wrote in commit msg - bindings were not fully updated to DTSes being used.
> 
> Hi Krzysztof,
> 
> Power-domains, operating-points etc. makes sense, but reg-names?
> 
> With quick search, sm8150.dtsi is the only user of reg-names. Moreover,
> there is no reference in driver to incorporate it.
> Driver(drivers/spi/spi-geni-qcom.c) looks for "se" as clock name and not
> as reg-name. If there's one, kindly help in pointing out.
> 
> It seems you are adding reg-names because some DT is using it and no
> other reason. And with no reference even in driver, that's surely not a
> way to go ahead as you have been advising the same in past.

I don't mind dropping it.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
deleted file mode 100644
index c8c1e913f4e7..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
+++ /dev/null
@@ -1,39 +0,0 @@ 
-GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
-
-The QUP v3 core is a GENI based AHB slave that provides a common data path
-(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
-mini-core.
-
-SPI in master mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Required properties:
-- compatible:		Must contain "qcom,geni-spi".
-- reg:			Must contain SPI register location and length.
-- interrupts:		Must contain SPI controller interrupts.
-- clock-names:		Must contain "se".
-- clocks:		Serial engine core clock needed by the device.
-- #address-cells:	Must be <1> to define a chip select address on
-			the SPI bus.
-- #size-cells:		Must be <0>.
-
-SPI Controller nodes must be child of GENI based Qualcomm Universal
-Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
-
-SPI slave nodes must be children of the SPI master node and conform to SPI bus
-binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
-	spi0: spi@a84000 {
-		compatible = "qcom,geni-spi";
-		reg = <0xa84000 0x4000>;
-		interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "se";
-		clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&qup_1_spi_2_active>;
-		pinctrl-1 = <&qup_1_spi_2_sleep>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
new file mode 100644
index 000000000000..62c4a9598e16
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -0,0 +1,120 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP v3 core is a GENI based AHB slave that provides a common data path
+  (an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+  mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+  SPI Controller nodes must be child of GENI based Qualcomm Universal
+  Peripharal. Please refer GENI based QUP wrapper controller node bindings
+  described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: qcom,geni-spi
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: se
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    spi@880000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&qup_opp_table>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+
+  - |
+    #include <dt-bindings/dma/qcom-gpi.h>
+
+    spi@884000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00884000 0x4000>;
+        reg-names = "se";
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+        dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+               <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi1_default>;
+        interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+        spi-max-frequency = <50000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };