diff mbox

[1/3] PM / OPP: Add "opp-supported-hw" binding

Message ID 20151103021254.GM3639@ubuntu
State New
Headers show

Commit Message

Viresh Kumar Nov. 3, 2015, 2:12 a.m. UTC 
On 02-11-15, 11:21, Stephen Boyd wrote:
> Ah I see that after looking at the previous thread. Perhaps we

> can add such information into the documentation so that people

> aren't misled into thinking they're limited to 32 bits?


What about these changes:


-- 
viresh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 96892057586a..b6ca2239838b 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -123,11 +123,15 @@  properties.
 - opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
   the table should have this.
 
-- opp-supported-hw: User defined array containing a hierarchy of hardware
-  version numbers, supported by the OPP. For example: a platform with hierarchy
-  of three levels of versions (A, B and C), this field should be like <X Y Z>,
-  where X corresponds to Version hierarchy A, Y corresponds to version hierarchy
-  B and Z corresponds to version hierarchy C.
+- opp-supported-hw: This enables us to select only a subset of OPPs from the
+  larger OPP table, based on what version of the hardware we are running on. We
+  still can't have multiple nodes with the same opp-hz value in OPP table.
+
+  Its an user defined array containing a hierarchy of hardware version numbers,
+  supported by the OPP. For example: a platform with hierarchy of three levels
+  of versions (A, B and C), this field should be like <X Y Z>, where X
+  corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
+  corresponds to version hierarchy C.
 
   Each level of hierarchy is represented by a 32 bit value, and so there can be
   only 32 different supported version per hierarchy. i.e. 1 bit per version. A
@@ -135,6 +139,10 @@  properties.
   level. And a value of 0x00000000 will disable the OPP completely, and so we
   never want that to happen.
 
+  If 32 values aren't sufficient for a version hierarchy, than that version
+  hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
+  above example, Z1 & Z2 refer to the version hierarchy Z.
+
 - status: Marks the node enabled/disabled.