diff mbox series

[3/5] Input: zinitix - Rename defines ZINITIX_*

Message ID 20220410120059.2583849-3-linus.walleij@linaro.org
State Accepted
Commit 077fdc9b59b0578752209a850231ee9ea1b3dabe
Headers show
Series [1/5] Input: zinitix - Helper dev variable in probe() | expand

Commit Message

Linus Walleij April 10, 2022, noon UTC 
The defines are sometimes named BT541_* and sometimes
ZINITIX_*, name them all ZINITIX_* because they certainly
apply to a lot more touchscreens than the BT541.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/input/touchscreen/zinitix.c | 112 ++++++++++++++--------------
 1 file changed, 56 insertions(+), 56 deletions(-)

Comments

Dmitry Torokhov May 27, 2022, 5:48 a.m. UTC | #1 
On Sun, Apr 10, 2022 at 02:00:57PM +0200, Linus Walleij wrote:
> The defines are sometimes named BT541_* and sometimes
> ZINITIX_*, name them all ZINITIX_* because they certainly
> apply to a lot more touchscreens than the BT541.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

I'll apply this, thank you.
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
index 11af1264cafa..f89dea49cf1f 100644
--- a/drivers/input/touchscreen/zinitix.c
+++ b/drivers/input/touchscreen/zinitix.c
@@ -15,75 +15,75 @@ 
 
 /* Register Map */
 
-#define BT541_SWRESET_CMD			0x0000
-#define BT541_WAKEUP_CMD			0x0001
+#define ZINITIX_SWRESET_CMD			0x0000
+#define ZINITIX_WAKEUP_CMD			0x0001
 
-#define BT541_IDLE_CMD				0x0004
-#define BT541_SLEEP_CMD				0x0005
+#define ZINITIX_IDLE_CMD			0x0004
+#define ZINITIX_SLEEP_CMD			0x0005
 
-#define BT541_CLEAR_INT_STATUS_CMD		0x0003
-#define BT541_CALIBRATE_CMD			0x0006
-#define BT541_SAVE_STATUS_CMD			0x0007
-#define BT541_SAVE_CALIBRATION_CMD		0x0008
-#define BT541_RECALL_FACTORY_CMD		0x000f
+#define ZINITIX_CLEAR_INT_STATUS_CMD		0x0003
+#define ZINITIX_CALIBRATE_CMD			0x0006
+#define ZINITIX_SAVE_STATUS_CMD			0x0007
+#define ZINITIX_SAVE_CALIBRATION_CMD		0x0008
+#define ZINITIX_RECALL_FACTORY_CMD		0x000f
 
-#define BT541_THRESHOLD				0x0020
+#define ZINITIX_THRESHOLD			0x0020
 
-#define BT541_LARGE_PALM_REJECT_AREA_TH		0x003F
+#define ZINITIX_LARGE_PALM_REJECT_AREA_TH	0x003F
 
-#define BT541_DEBUG_REG				0x0115 /* 0~7 */
+#define ZINITIX_DEBUG_REG			0x0115 /* 0~7 */
 
-#define BT541_TOUCH_MODE			0x0010
-#define BT541_CHIP_REVISION			0x0011
-#define BT541_FIRMWARE_VERSION			0x0012
+#define ZINITIX_TOUCH_MODE			0x0010
+#define ZINITIX_CHIP_REVISION			0x0011
+#define ZINITIX_FIRMWARE_VERSION		0x0012
 
 #define ZINITIX_USB_DETECT			0x116
 
-#define BT541_MINOR_FW_VERSION			0x0121
+#define ZINITIX_MINOR_FW_VERSION		0x0121
 
-#define BT541_VENDOR_ID				0x001C
-#define BT541_HW_ID				0x0014
+#define ZINITIX_VENDOR_ID			0x001C
+#define ZINITIX_HW_ID				0x0014
 
-#define BT541_DATA_VERSION_REG			0x0013
-#define BT541_SUPPORTED_FINGER_NUM		0x0015
-#define BT541_EEPROM_INFO			0x0018
-#define BT541_INITIAL_TOUCH_MODE		0x0019
+#define ZINITIX_DATA_VERSION_REG		0x0013
+#define ZINITIX_SUPPORTED_FINGER_NUM		0x0015
+#define ZINITIX_EEPROM_INFO			0x0018
+#define ZINITIX_INITIAL_TOUCH_MODE		0x0019
 
-#define BT541_TOTAL_NUMBER_OF_X			0x0060
-#define BT541_TOTAL_NUMBER_OF_Y			0x0061
+#define ZINITIX_TOTAL_NUMBER_OF_X		0x0060
+#define ZINITIX_TOTAL_NUMBER_OF_Y		0x0061
 
-#define BT541_DELAY_RAW_FOR_HOST		0x007f
+#define ZINITIX_DELAY_RAW_FOR_HOST		0x007f
 
-#define BT541_BUTTON_SUPPORTED_NUM		0x00B0
-#define BT541_BUTTON_SENSITIVITY		0x00B2
-#define BT541_DUMMY_BUTTON_SENSITIVITY		0X00C8
+#define ZINITIX_BUTTON_SUPPORTED_NUM		0x00B0
+#define ZINITIX_BUTTON_SENSITIVITY		0x00B2
+#define ZINITIX_DUMMY_BUTTON_SENSITIVITY	0X00C8
 
-#define BT541_X_RESOLUTION			0x00C0
-#define BT541_Y_RESOLUTION			0x00C1
+#define ZINITIX_X_RESOLUTION			0x00C0
+#define ZINITIX_Y_RESOLUTION			0x00C1
 
-#define BT541_POINT_STATUS_REG			0x0080
-#define BT541_ICON_STATUS_REG			0x00AA
+#define ZINITIX_POINT_STATUS_REG		0x0080
+#define ZINITIX_ICON_STATUS_REG			0x00AA
 
-#define BT541_POINT_COORD_REG			(BT541_POINT_STATUS_REG + 2)
+#define ZINITIX_POINT_COORD_REG			(ZINITIX_POINT_STATUS_REG + 2)
 
-#define BT541_AFE_FREQUENCY			0x0100
-#define BT541_DND_N_COUNT			0x0122
-#define BT541_DND_U_COUNT			0x0135
+#define ZINITIX_AFE_FREQUENCY			0x0100
+#define ZINITIX_DND_N_COUNT			0x0122
+#define ZINITIX_DND_U_COUNT			0x0135
 
-#define BT541_RAWDATA_REG			0x0200
+#define ZINITIX_RAWDATA_REG			0x0200
 
-#define BT541_EEPROM_INFO_REG			0x0018
+#define ZINITIX_EEPROM_INFO_REG			0x0018
 
-#define BT541_INT_ENABLE_FLAG			0x00f0
-#define BT541_PERIODICAL_INTERRUPT_INTERVAL	0x00f1
+#define ZINITIX_INT_ENABLE_FLAG			0x00f0
+#define ZINITIX_PERIODICAL_INTERRUPT_INTERVAL	0x00f1
 
-#define BT541_BTN_WIDTH				0x016d
+#define ZINITIX_BTN_WIDTH			0x016d
 
-#define BT541_CHECKSUM_RESULT			0x012c
+#define ZINITIX_CHECKSUM_RESULT			0x012c
 
-#define BT541_INIT_FLASH			0x01d0
-#define BT541_WRITE_FLASH			0x01d1
-#define BT541_READ_FLASH			0x01d2
+#define ZINITIX_INIT_FLASH			0x01d0
+#define ZINITIX_WRITE_FLASH			0x01d1
+#define ZINITIX_READ_FLASH			0x01d2
 
 #define ZINITIX_INTERNAL_FLAG_02		0x011e
 #define ZINITIX_INTERNAL_FLAG_03		0x011f
@@ -197,13 +197,13 @@  static int zinitix_init_touch(struct bt541_ts_data *bt541)
 	int i;
 	int error;
 
-	error = zinitix_write_cmd(client, BT541_SWRESET_CMD);
+	error = zinitix_write_cmd(client, ZINITIX_SWRESET_CMD);
 	if (error) {
 		dev_err(bt541->dev, "Failed to write reset command\n");
 		return error;
 	}
 
-	error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0);
+	error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, 0x0);
 	if (error) {
 		dev_err(bt541->dev,
 			"Failed to reset interrupt enable flag\n");
@@ -211,32 +211,32 @@  static int zinitix_init_touch(struct bt541_ts_data *bt541)
 	}
 
 	/* initialize */
-	error = zinitix_write_u16(client, BT541_X_RESOLUTION,
+	error = zinitix_write_u16(client, ZINITIX_X_RESOLUTION,
 				  bt541->prop.max_x);
 	if (error)
 		return error;
 
-	error = zinitix_write_u16(client, BT541_Y_RESOLUTION,
+	error = zinitix_write_u16(client, ZINITIX_Y_RESOLUTION,
 				  bt541->prop.max_y);
 	if (error)
 		return error;
 
-	error = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM,
+	error = zinitix_write_u16(client, ZINITIX_SUPPORTED_FINGER_NUM,
 				  MAX_SUPPORTED_FINGER_NUM);
 	if (error)
 		return error;
 
-	error = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE,
+	error = zinitix_write_u16(client, ZINITIX_INITIAL_TOUCH_MODE,
 				  bt541->zinitix_mode);
 	if (error)
 		return error;
 
-	error = zinitix_write_u16(client, BT541_TOUCH_MODE,
+	error = zinitix_write_u16(client, ZINITIX_TOUCH_MODE,
 				  bt541->zinitix_mode);
 	if (error)
 		return error;
 
-	error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG,
+	error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG,
 				  BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE |
 					BIT_UP);
 	if (error)
@@ -244,7 +244,7 @@  static int zinitix_init_touch(struct bt541_ts_data *bt541)
 
 	/* clear queue */
 	for (i = 0; i < 10; i++) {
-		zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD);
+		zinitix_write_cmd(client, ZINITIX_CLEAR_INT_STATUS_CMD);
 		udelay(10);
 	}
 
@@ -361,7 +361,7 @@  static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
 
 	memset(&touch_event, 0, sizeof(struct touch_event));
 
-	error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG,
+	error = zinitix_read_data(bt541->client, ZINITIX_POINT_STATUS_REG,
 				  &touch_event, sizeof(struct touch_event));
 	if (error) {
 		dev_err(bt541->dev, "Failed to read in touchpoint struct\n");
@@ -381,7 +381,7 @@  static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
 	input_sync(bt541->input_dev);
 
 out:
-	zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD);
+	zinitix_write_cmd(bt541->client, ZINITIX_CLEAR_INT_STATUS_CMD);
 	return IRQ_HANDLED;
 }