diff mbox series

[1/2] media: dt-bindings: imx412: Add regulator descriptions

Message ID 20220410163109.3501513-2-bryan.odonoghue@linaro.org
State New
Headers show
Series media: i2c: imx412: Add regulator control to imx412 | expand

Commit Message

Bryan O'Donoghue April 10, 2022, 4:31 p.m. UTC
The imx412 like many I2C camera sensors has three voltage rails which
depending on platform may be necessary to switch power onto directly.

Add in as optional rails so as not to break anything for existing users.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../devicetree/bindings/media/i2c/sony,imx412.yaml   | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
index afcf70947f7e..16869a91ec9a 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -32,6 +32,18 @@  properties:
     description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
     maxItems: 1
 
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1