diff mbox series

[1/2] dt-bindings: thermal: sun8i-thermal: add binding for R329 THS

Message ID BYAPR20MB24721F9954252BECBEF486ACBCF79@BYAPR20MB2472.namprd20.prod.outlook.com
State New
Headers show
Series [1/2] dt-bindings: thermal: sun8i-thermal: add binding for R329 THS | expand

Commit Message

icenowy@outlook.com April 22, 2022, 4:11 p.m. UTC
From: Icenowy Zheng <icenowy@aosc.io>

R329 has a thermal sensor controller that has only one sensor, and the
structure of it is like the H6 one.

Add device tree binding for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 .../devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml  | 3 +++
 1 file changed, 3 insertions(+)

Comments

Vasily Khoruzhick April 22, 2022, 6:44 p.m. UTC | #1
On Fri, Apr 22, 2022 at 9:12 AM <icenowy@outlook.com> wrote:
>
> From: Icenowy Zheng <icenowy@aosc.io>
>
> R329 has a thermal sensor controller that has only one sensor, and the
> structure of it is like the H6 one.
>
> Add device tree binding for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
>  .../devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml  | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> index 6e0b110153b0..87b4103e0a5f 100644
> --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> @@ -20,6 +20,7 @@ properties:
>        - allwinner,sun50i-a100-ths
>        - allwinner,sun50i-h5-ths
>        - allwinner,sun50i-h6-ths
> +      - allwinner,sun50i-r329-ths
>
>    clocks:
>      minItems: 1
> @@ -63,6 +64,7 @@ allOf:
>              enum:
>                - allwinner,sun50i-a100-ths
>                - allwinner,sun50i-h6-ths
> +              - allwinner,sun50i-r329-ths
>
>      then:
>        properties:
> @@ -85,6 +87,7 @@ allOf:
>          compatible:
>            contains:
>              const: allwinner,sun8i-h3-ths
> +            const: allwinner,sun8i-r329-ths
>
>      then:
>        properties:

There's also a check at line #99 that requires clock, clock-names and
resets properties for thermal sensors in other Allwinner SoCs. Are
these not required for r329?

Also are you planning to add a node for thermal sensor to r329 dtsi?


> --
> 2.35.1
>
Icenowy Zheng April 22, 2022, 11:51 p.m. UTC | #2
在 2022-04-22星期五的 11:44 -0700,Vasily Khoruzhick写道:
> On Fri, Apr 22, 2022 at 9:12 AM <icenowy@outlook.com> wrote:
> > 
> > From: Icenowy Zheng <icenowy@aosc.io>
> > 
> > R329 has a thermal sensor controller that has only one sensor, and
> > the
> > structure of it is like the H6 one.
> > 
> > Add device tree binding for it.
> > 
> > Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> > ---
> >  .../devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml  | 3
> > +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-
> > ths.yaml
> > b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-
> > ths.yaml
> > index 6e0b110153b0..87b4103e0a5f 100644
> > --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-
> > a83t-ths.yaml
> > +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-
> > a83t-ths.yaml
> > @@ -20,6 +20,7 @@ properties:
> >        - allwinner,sun50i-a100-ths
> >        - allwinner,sun50i-h5-ths
> >        - allwinner,sun50i-h6-ths
> > +      - allwinner,sun50i-r329-ths
> > 
> >    clocks:
> >      minItems: 1
> > @@ -63,6 +64,7 @@ allOf:
> >              enum:
> >                - allwinner,sun50i-a100-ths
> >                - allwinner,sun50i-h6-ths
> > +              - allwinner,sun50i-r329-ths
> > 
> >      then:
> >        properties:
> > @@ -85,6 +87,7 @@ allOf:
> >          compatible:
> >            contains:
> >              const: allwinner,sun8i-h3-ths
> > +            const: allwinner,sun8i-r329-ths
> > 
> >      then:
> >        properties:
> 
> There's also a check at line #99 that requires clock, clock-names and
> resets properties for thermal sensors in other Allwinner SoCs. Are
> these not required for r329?

Thanks for this tip, I will add R329 to this check in the next
revision.

> 
> Also are you planning to add a node for thermal sensor to r329 dtsi?
> 
> 
> > --
> > 2.35.1
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 6e0b110153b0..87b4103e0a5f 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -20,6 +20,7 @@  properties:
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
+      - allwinner,sun50i-r329-ths
 
   clocks:
     minItems: 1
@@ -63,6 +64,7 @@  allOf:
             enum:
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
+              - allwinner,sun50i-r329-ths
 
     then:
       properties:
@@ -85,6 +87,7 @@  allOf:
         compatible:
           contains:
             const: allwinner,sun8i-h3-ths
+            const: allwinner,sun8i-r329-ths
 
     then:
       properties: