diff mbox series

[3/5] scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled

Message ID 20220422132140.313390-4-manivannan.sadhasivam@linaro.org
State New
Headers show
Series Qcom UFS driver updates | expand

Commit Message

Manivannan Sadhasivam April 22, 2022, 1:21 p.m. UTC
In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be
stable for atleast 1us. Eventhough there is wmb() to make sure the write
gets "completed", there is no guarantee that the write actually reached
the UFS device. There is a good chance that the write could be stored in
a Write Buffer (WB). In that case, eventhough the CPU waits for 1us, the
ref_clk might not be stable for that period.

So lets do a readl() to make sure that the previous write has reached the
UFS device before udelay().

Cc: stable@vger.kernel.org
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/scsi/ufs/ufs-qcom.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 5f0a8f646eb5..5b9986c63eed 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -690,6 +690,12 @@  static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
 		/* ensure that ref_clk is enabled/disabled before we return */
 		wmb();
 
+		/*
+		 * Make sure the write to ref_clk reaches the destination and
+		 * not stored in a Write Buffer (WB).
+		 */
+		readl(host->dev_ref_clk_ctrl_mmio);
+
 		/*
 		 * If we call hibern8 exit after this, we need to make sure that
 		 * device ref_clk is stable for at least 1us before the hibern8