@@ -30,6 +30,75 @@ static struct device *next_device(struct klist_iter *i)
return dev;
}
+/**
+ * driver_set_override() - Helper to set or clear driver override.
+ * @dev: Device to change
+ * @override: Address of string to change (e.g. &device->driver_override);
+ * The contents will be freed and hold newly allocated override.
+ * @s: NUL-terminated string, new driver name to force a match, pass empty
+ * string to clear it ("" or "\n", where the latter is only for sysfs
+ * interface).
+ * @len: length of @s
+ *
+ * Helper to set or clear driver override in a device, intended for the cases
+ * when the driver_override field is allocated by driver/bus code.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int driver_set_override(struct device *dev, const char **override,
+ const char *s, size_t len)
+{
+ const char *new, *old;
+ char *cp;
+
+ if (!override || !s)
+ return -EINVAL;
+
+ /*
+ * The stored value will be used in sysfs show callback (sysfs_emit()),
+ * which has a length limit of PAGE_SIZE and adds a trailing newline.
+ * Thus we can store one character less to avoid truncation during sysfs
+ * show.
+ */
+ if (len >= (PAGE_SIZE - 1))
+ return -EINVAL;
+
+ if (!len) {
+ /* Empty string passed - clear override */
+ device_lock(dev);
+ old = *override;
+ *override = NULL;
+ device_unlock(dev);
+ kfree(old);
+
+ return 0;
+ }
+
+ cp = strnchr(s, len, '\n');
+ if (cp)
+ len = cp - s;
+
+ new = kstrndup(s, len, GFP_KERNEL);
+ if (!new)
+ return -ENOMEM;
+
+ device_lock(dev);
+ old = *override;
+ if (cp != s) {
+ *override = new;
+ } else {
+ /* "\n" passed - clear override */
+ kfree(new);
+ *override = NULL;
+ }
+ device_unlock(dev);
+
+ kfree(old);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(driver_set_override);
+
/**
* driver_for_each_device - Iterator for devices bound to a driver.
* @drv: Driver we're iterating.
@@ -1275,31 +1275,11 @@ static ssize_t driver_override_store(struct device *dev,
const char *buf, size_t count)
{
struct platform_device *pdev = to_platform_device(dev);
- char *driver_override, *old, *cp;
-
- /* We need to keep extra room for a newline */
- if (count >= (PAGE_SIZE - 1))
- return -EINVAL;
-
- driver_override = kstrndup(buf, count, GFP_KERNEL);
- if (!driver_override)
- return -ENOMEM;
-
- cp = strchr(driver_override, '\n');
- if (cp)
- *cp = '\0';
-
- device_lock(dev);
- old = pdev->driver_override;
- if (strlen(driver_override)) {
- pdev->driver_override = driver_override;
- } else {
- kfree(driver_override);
- pdev->driver_override = NULL;
- }
- device_unlock(dev);
+ int ret;
- kfree(old);
+ ret = driver_set_override(dev, &pdev->driver_override, buf, count);
+ if (ret)
+ return ret;
return count;
}
@@ -151,6 +151,8 @@ extern int __must_check driver_create_file(struct device_driver *driver,
extern void driver_remove_file(struct device_driver *driver,
const struct driver_attribute *attr);
+int driver_set_override(struct device *dev, const char **override,
+ const char *s, size_t len);
extern int __must_check driver_for_each_device(struct device_driver *drv,
struct device *start,
void *data,
@@ -31,7 +31,11 @@ struct platform_device {
struct resource *resource;
const struct platform_device_id *id_entry;
- char *driver_override; /* Driver name to force a match */
+ /*
+ * Driver name to force a match. Do not set directly, because core
+ * frees it. Use driver_set_override() to set or clear it.
+ */
+ const char *driver_override;
/* MFD cell pointer */
struct mfd_cell *mfd_cell;
Several core drivers and buses expect that driver_override is a dynamically allocated memory thus later they can kfree() it. However such assumption is not documented, there were in the past and there are already users setting it to a string literal. This leads to kfree() of static memory during device release (e.g. in error paths or during unbind): kernel BUG at ../mm/slub.c:3960! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kfree) from [<c058da50>] (platform_device_release+0x88/0xb4) (platform_device_release) from [<c0585be0>] (device_release+0x2c/0x90) (device_release) from [<c0a69050>] (kobject_put+0xec/0x20c) (kobject_put) from [<c0f2f120>] (exynos5_clk_probe+0x154/0x18c) (exynos5_clk_probe) from [<c058de70>] (platform_drv_probe+0x6c/0xa4) (platform_drv_probe) from [<c058b7ac>] (really_probe+0x280/0x414) (really_probe) from [<c058baf4>] (driver_probe_device+0x78/0x1c4) (driver_probe_device) from [<c0589854>] (bus_for_each_drv+0x74/0xb8) (bus_for_each_drv) from [<c058b48c>] (__device_attach+0xd4/0x16c) (__device_attach) from [<c058a638>] (bus_probe_device+0x88/0x90) (bus_probe_device) from [<c05871fc>] (device_add+0x3dc/0x62c) (device_add) from [<c075ff10>] (of_platform_device_create_pdata+0x94/0xbc) (of_platform_device_create_pdata) from [<c07600ec>] (of_platform_bus_create+0x1a8/0x4fc) (of_platform_bus_create) from [<c0760150>] (of_platform_bus_create+0x20c/0x4fc) (of_platform_bus_create) from [<c07605f0>] (of_platform_populate+0x84/0x118) (of_platform_populate) from [<c0f3c964>] (of_platform_default_populate_init+0xa0/0xb8) (of_platform_default_populate_init) from [<c01031f8>] (do_one_initcall+0x8c/0x404) Provide a helper which clearly documents the usage of driver_override. This will allow later to reuse the helper and reduce the amount of duplicated code. Convert the platform driver to use a new helper and make the driver_override field const char (it is not modified by the core). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/base/driver.c | 69 +++++++++++++++++++++++++++++++++ drivers/base/platform.c | 28 ++----------- include/linux/device/driver.h | 2 + include/linux/platform_device.h | 6 ++- 4 files changed, 80 insertions(+), 25 deletions(-)