diff mbox series

[06/13] arm64: dts: qcom: correct DWC3 node names and unit addresses

Message ID 20220504131923.214367-7-krzysztof.kozlowski@linaro.org
State Accepted
Commit b77a1c4d6b058d801645a9f46030e7f8829628b2
Headers show
Series [01/13] dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp | expand

Commit Message

Krzysztof Kozlowski May 4, 2022, 1:19 p.m. UTC
Align DWC3 USB node names with DT schema ("usb" is expected) and correct
the unit addresses to match the "reg" property.  This also implies
overriding nodes by label, instead of full path.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dts   | 18 ++++++++---------
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  6 +++---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi         |  4 ++--
 .../boot/dts/qcom/msm8996-xiaomi-common.dtsi  | 20 +++++++++----------
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |  4 ++--
 arch/arm64/boot/dts/qcom/msm8998.dtsi         |  2 +-
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi      |  7 ++++---
 arch/arm64/boot/dts/qcom/qcs404.dtsi          |  4 ++--
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  4 ++--
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |  2 +-
 11 files changed, 37 insertions(+), 36 deletions(-)

Comments

Bjorn Andersson June 30, 2022, 3:30 a.m. UTC | #1
On Wed 04 May 08:19 CDT 2022, Krzysztof Kozlowski wrote:
[..]
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 692cf4be4eef..6af80a627c3a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3868,7 +3868,7 @@ usb_1: usb@a6f8800 {
>  					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			usb_1_dwc3: usb@a600000 {

Linux uses the dev_name() when identifying each of these controllers in
/sys/class/UDC, as such changing the name here will break existing USB
ConfigFS Gadget users.

We had this fixed for a while, but where forced to revert it.


So I think, in order for us to merge this without breaking AOSP, we'd
need to come up with a way to retain the old UDC name (perhaps a label
property?)

Regards,
Bjorn
Krzysztof Kozlowski June 30, 2022, 6:52 p.m. UTC | #2
On 30/06/2022 05:30, Bjorn Andersson wrote:
> On Wed 04 May 08:19 CDT 2022, Krzysztof Kozlowski wrote:
> [..]
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index 692cf4be4eef..6af80a627c3a 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -3868,7 +3868,7 @@ usb_1: usb@a6f8800 {
>>  					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
>>  			interconnect-names = "usb-ddr", "apps-usb";
>>  
>> -			usb_1_dwc3: dwc3@a600000 {
>> +			usb_1_dwc3: usb@a600000 {
> 
> Linux uses the dev_name() when identifying each of these controllers in
> /sys/class/UDC, as such changing the name here will break existing USB
> ConfigFS Gadget users.
> 
> We had this fixed for a while, but where forced to revert it.
> 
> 
> So I think, in order for us to merge this without breaking AOSP, we'd
> need to come up with a way to retain the old UDC name (perhaps a label
> property?)

Ugh, I thought this was long time solved [1][2] and allowed to merge
most of [3] to get merged.


[1]
https://lore.kernel.org/all/CALAqxLWGujgR7p8Vb5S_RimRVYxwm5XF-c4NkKgMH-43wEBaWg@mail.gmail.com/

[2]
https://lore.kernel.org/linux-usb/CALAqxLXrs0_Xs0JV5H-wS1q2CJ7XhW5Dj90eu=uazkRXXEMUxQ@mail.gmail.com/

[3]
https://lore.kernel.org/all/20201020115959.2658-1-Sergey.Semin@baikalelectronics.ru/


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 56e54ce4d10e..49afbb1a066a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -1052,22 +1052,22 @@  &ufshc {
 &usb2 {
 	status = "okay";
 	extcon = <&usb2_id>;
+};
 
-	dwc3@7600000 {
-		extcon = <&usb2_id>;
-		dr_mode = "otg";
-		maximum-speed = "high-speed";
-	};
+&usb2_dwc3 {
+	extcon = <&usb2_id>;
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
 };
 
 &usb3 {
 	status = "okay";
 	extcon = <&usb3_id>;
+};
 
-	dwc3@6a00000 {
-		extcon = <&usb3_id>;
-		dr_mode = "otg";
-	};
+&usb3_dwc3 {
+	extcon = <&usb3_id>;
+	dr_mode = "otg";
 };
 
 &usb3phy {
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index a4d363c187fc..835de9834833 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -653,7 +653,7 @@  qusb_phy_1: qusb@59000 {
 			status = "disabled";
 		};
 
-		usb2: usb2@7000000 {
+		usb2: usb@70f8800 {
 			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
 			reg = <0x0 0x070F8800 0x0 0x400>;
 			#address-cells = <2>;
@@ -730,7 +730,7 @@  qusb_phy_0: qusb@79000 {
 			status = "disabled";
 		};
 
-		usb3: usb3@8A00000 {
+		usb3: usb@8af8800 {
 			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
 			reg = <0x0 0x8AF8800 0x0 0x400>;
 			#address-cells = <2>;
@@ -756,7 +756,7 @@  usb3: usb3@8A00000 {
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
 
-			dwc_0: usb@8A00000 {
+			dwc_0: usb@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x8A00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 943243d5515b..519938530c35 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -578,7 +578,7 @@  usb_0: usb@8af8800 {
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
 
-			dwc_0: dwc3@8a00000 {
+			dwc_0: usb@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,7 +618,7 @@  usb_1: usb@8cf8800 {
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
-			dwc_1: dwc3@8c00000 {
+			dwc_1: usb@8c00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index be4f643b1fd1..a7090befc16f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -308,19 +308,19 @@  &usb3 {
 	extcon = <&typec>;
 
 	qcom,select-utmi-as-pipe-clk;
+};
 
-	dwc3@6a00000 {
-		extcon = <&typec>;
+&usb3_dwc3 {
+	extcon = <&typec>;
 
-		/* usb3-phy is not used on this device */
-		phys = <&hsusb_phy1>;
-		phy-names = "usb2-phy";
+	/* usb3-phy is not used on this device */
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
 
-		maximum-speed = "high-speed";
-		snps,is-utmi-l1-suspend;
-		snps,usb2-gadget-lpm-disable;
-		snps,hird-threshold = /bits/ 8 <0>;
-	};
+	maximum-speed = "high-speed";
+	snps,is-utmi-l1-suspend;
+	snps,usb2-gadget-lpm-disable;
+	snps,hird-threshold = /bits/ 8 <0>;
 };
 
 &hsusb_phy1 {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 205af7b479a8..fc2e026d4c07 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2731,7 +2731,7 @@  usb3: usb@6af8800 {
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";
 
-			usb3_dwc3: dwc3@6a00000 {
+			usb3_dwc3: usb@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -3059,7 +3059,7 @@  usb2: usb@76f8800 {
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
-			dwc3@7600000 {
+			usb2_dwc3: usb@7600000 {
 				compatible = "snps,dwc3";
 				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 4a84de6cee1e..0200d532b531 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2040,7 +2040,7 @@  usb3: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
-			usb3_dwc3: dwc3@a800000 {
+			usb3_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a800000 0xcd00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index a80c578484ba..2f3104a84417 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,9 +337,10 @@  &usb2_phy_sec {
 &usb3 {
 	status = "okay";
 
-	dwc3@7580000 {
-		dr_mode = "host";
-	};
+};
+
+&usb3_dwc3 {
+	dr_mode = "host";
 };
 
 &usb2_phy_prim {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index bc446c6002d0..568821259f11 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@  usb3: usb@7678800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 			status = "disabled";
 
-			dwc3@7580000 {
+			usb3_dwc3: usb@7580000 {
 				compatible = "snps,dwc3";
 				reg = <0x07580000 0xcd00>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@  usb2: usb@79b8800 {
 			assigned-clock-rates = <19200000>, <133333333>;
 			status = "disabled";
 
-			dwc3@78c0000 {
+			usb@78c0000 {
 				compatible = "snps,dwc3";
 				reg = <0x078c0000 0xcc00>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 925340fbbb59..e9f834361660 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2786,7 +2786,7 @@  usb_1: usb@a6f8800 {
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 692cf4be4eef..6af80a627c3a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3868,7 +3868,7 @@  usb_1: usb@a6f8800 {
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3916,7 +3916,7 @@  usb_2: usb@a8f8800 {
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_2_dwc3: dwc3@a800000 {
+			usb_2_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 90a4c09e67f1..a57a13486c6c 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3635,7 +3635,7 @@  usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;