diff mbox series

[v2,4/4] powerpc/52xx: Convert to use fwnode API

Message ID 20220507100147.5802-4-andriy.shevchenko@linux.intel.com
State New
Headers show
Series [v2,1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq() | expand

Commit Message

Andy Shevchenko May 7, 2022, 10:01 a.m. UTC
We may convert the GPT driver to use fwnode API for the sake
of consistency of the used APIs inside the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: no changes
 arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 47 +++++++++++------------
 1 file changed, 22 insertions(+), 25 deletions(-)

Comments

Andy Shevchenko May 16, 2022, 2:05 p.m. UTC | #1
On Mon, May 16, 2022 at 11:48:05PM +1000, Michael Ellerman wrote:
> Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:
> > We may convert the GPT driver to use fwnode API for the sake
> > of consistency of the used APIs inside the driver.
> 
> I'm not sure about this one.
> 
> It's more consistent to use fwnode in this driver, but it's very
> inconsistent with the rest of the powerpc code. We have basically no
> uses of the fwnode APIs at the moment.

Fair point!

> It seems like a pretty straight-forward conversion, but there could
> easily be a bug in there, I don't have any way to test it. Do you?

Nope, only compile testing. The important part of this series is to
clean up of_node from GPIO library, so since here it's a user of
it I want to do that. This patch is just ad-hoc conversion that I
noticed is possible. But there is no any requirement to do so.

Lemme drop this from v3.
Michael Ellerman May 16, 2022, 11:38 p.m. UTC | #2
Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:
> On Mon, May 16, 2022 at 05:05:12PM +0300, Andy Shevchenko wrote:
>> On Mon, May 16, 2022 at 11:48:05PM +1000, Michael Ellerman wrote:
>> > Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:
>> > > We may convert the GPT driver to use fwnode API for the sake
>> > > of consistency of the used APIs inside the driver.
>> > 
>> > I'm not sure about this one.
>> > 
>> > It's more consistent to use fwnode in this driver, but it's very
>> > inconsistent with the rest of the powerpc code. We have basically no
>> > uses of the fwnode APIs at the moment.
>> 
>> Fair point!
>> 
>> > It seems like a pretty straight-forward conversion, but there could
>> > easily be a bug in there, I don't have any way to test it. Do you?
>> 
>> Nope, only compile testing. The important part of this series is to
>> clean up of_node from GPIO library, so since here it's a user of
>> it I want to do that. This patch is just ad-hoc conversion that I
>> noticed is possible. But there is no any requirement to do so.
>> 
>> Lemme drop this from v3.
>
> I just realize that there is no point to send a v3. You can just apply
> first 3 patches. Or is your comment against entire series?

No, my comment is just about this patch.

I don't mind converting to new APIs when it's blocking some other
cleanup. But given the age of this code I think it's probably better to
just leave the rest of it as-is, unless someone volunteers to test it.

So yeah I'll just take patches 1-3 of this v2 series, no need to resend.

cheers
diff mbox series

Patch

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index ae47fdcc8a96..58c3651034bd 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -53,10 +53,9 @@ 
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/list.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
 #include <linux/kernel.h>
 #include <linux/property.h>
 #include <linux/slab.h>
@@ -64,7 +63,7 @@ 
 #include <linux/watchdog.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
-#include <linux/module.h>
+
 #include <asm/div64.h>
 #include <asm/mpc52xx.h>
 
@@ -235,18 +234,17 @@  static const struct irq_domain_ops mpc52xx_gpt_irq_ops = {
 	.xlate = mpc52xx_gpt_irq_xlate,
 };
 
-static void
-mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
+static void mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt)
 {
 	int cascade_virq;
 	unsigned long flags;
 	u32 mode;
 
-	cascade_virq = irq_of_parse_and_map(node, 0);
-	if (!cascade_virq)
+	cascade_virq = platform_get_irq(to_platform_device(gpt->dev), 0);
+	if (cascade_virq < 0)
 		return;
 
-	gpt->irqhost = irq_domain_add_linear(node, 1, &mpc52xx_gpt_irq_ops, gpt);
+	gpt->irqhost = irq_domain_create_linear(dev_fwnode(gpt->dev), 1, &mpc52xx_gpt_irq_ops, gpt);
 	if (!gpt->irqhost) {
 		dev_err(gpt->dev, "irq_domain_add_linear() failed\n");
 		return;
@@ -670,8 +668,7 @@  static int mpc52xx_gpt_wdt_init(void)
 	return err;
 }
 
-static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
-				 const u32 *period)
+static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, const u32 period)
 {
 	u64 real_timeout;
 
@@ -679,14 +676,14 @@  static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
 	mpc52xx_gpt_wdt = gpt;
 
 	/* configure the wdt if the device tree contained a timeout */
-	if (!period || *period == 0)
+	if (period == 0)
 		return 0;
 
-	real_timeout = (u64) *period * 1000000000ULL;
+	real_timeout = (u64)period * 1000000000ULL;
 	if (mpc52xx_gpt_do_start(gpt, real_timeout, 0, 1))
 		dev_warn(gpt->dev, "starting as wdt failed\n");
 	else
-		dev_info(gpt->dev, "watchdog set to %us timeout\n", *period);
+		dev_info(gpt->dev, "watchdog set to %us timeout\n", period);
 	return 0;
 }
 
@@ -697,8 +694,7 @@  static int mpc52xx_gpt_wdt_init(void)
 	return 0;
 }
 
-static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
-					const u32 *period)
+static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, const u32 period)
 {
 	return 0;
 }
@@ -726,25 +722,26 @@  static int mpc52xx_gpt_probe(struct platform_device *ofdev)
 	dev_set_drvdata(&ofdev->dev, gpt);
 
 	mpc52xx_gpt_gpio_setup(gpt);
-	mpc52xx_gpt_irq_setup(gpt, ofdev->dev.of_node);
+	mpc52xx_gpt_irq_setup(gpt);
 
 	mutex_lock(&mpc52xx_gpt_list_mutex);
 	list_add(&gpt->list, &mpc52xx_gpt_list);
 	mutex_unlock(&mpc52xx_gpt_list_mutex);
 
 	/* check if this device could be a watchdog */
-	if (of_get_property(ofdev->dev.of_node, "fsl,has-wdt", NULL) ||
-	    of_get_property(ofdev->dev.of_node, "has-wdt", NULL)) {
-		const u32 *on_boot_wdt;
+	if (device_property_present(gpt->dev, "fsl,has-wdt") ||
+	    device_property_present(gpt->dev, "has-wdt")) {
+		u32 on_boot_wdt = 0;
+		int ret;
 
 		gpt->wdt_mode = MPC52xx_GPT_CAN_WDT;
-		on_boot_wdt = of_get_property(ofdev->dev.of_node,
-					      "fsl,wdt-on-boot", NULL);
-		if (on_boot_wdt) {
+		ret = device_property_read_u32(gpt->dev, "fsl,wdt-on-boot", &on_boot_wdt);
+		if (ret) {
+			dev_info(gpt->dev, "can function as watchdog\n");
+		} else {
 			dev_info(gpt->dev, "used as watchdog\n");
 			gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
-		} else
-			dev_info(gpt->dev, "can function as watchdog\n");
+		}
 		mpc52xx_gpt_wdt_setup(gpt, on_boot_wdt);
 	}