diff mbox series

[2/3] spi: stm32-qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()

Message ID 20220511074644.558874-3-patrice.chotard@foss.st.com
State Accepted
Commit 0cf8d32600cf5660ee45d421f1b6e3a129ca58b6
Headers show
Series spi: stm32-qspi: flags management fixes | expand

Commit Message

Patrice CHOTARD May 11, 2022, 7:46 a.m. UTC 
From: Patrice Chotard <patrice.chotard@foss.st.com>

Currently, SR_TCF flag is checked in case there is data, this criteria
is not correct.

SR_TCF flags is set when programmed number of bytes has been transferred
to the memory device ("bytes" comprised command and data send to the
SPI device).
So even if there is no data, we must check SR_TCF flag.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 drivers/spi/spi-stm32-qspi.c | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 12d8bec35bf6..1660ca5bd1c5 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -305,9 +305,6 @@  static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
 	u32 cr, sr;
 	int err = 0;
 
-	if (!op->data.nbytes)
-		goto wait_nobusy;
-
 	if ((readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF) ||
 	    qspi->fmode == CCR_FMODE_APM)
 		goto out;
@@ -328,7 +325,6 @@  static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
 out:
 	/* clear flags */
 	writel_relaxed(FCR_CTCF | FCR_CTEF, qspi->io_base + QSPI_FCR);
-wait_nobusy:
 	if (!err)
 		err = stm32_qspi_wait_nobusy(qspi);