diff mbox series

[v2,5/5] serial: jsm: Use B0 instead of 0

Message ID 20220513082906.11096-6-ilpo.jarvinen@linux.intel.com
State New
Headers show
Series [v2,1/5] tty: remove CMSPAR ifdefs | expand

Commit Message

Ilpo Järvinen May 13, 2022, 8:29 a.m. UTC 
Use B0 to check zero baudrate rather than literal 0.

While at it, remove extra parenthesis around CBAUD.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/jsm/jsm_cls.c | 2 +-
 drivers/tty/serial/jsm/jsm_neo.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index 046b624e5f71..3fd57ac3ad81 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -689,7 +689,7 @@  static void cls_param(struct jsm_channel *ch)
 	/*
 	 * If baud rate is zero, flush queues, and set mval to drop DTR.
 	 */
-	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+	if ((ch->ch_c_cflag & CBAUD) == B0) {
 		ch->ch_r_head = 0;
 		ch->ch_r_tail = 0;
 		ch->ch_e_head = 0;
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 0cf586c10688..0c78f66276cd 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -938,7 +938,7 @@  static void neo_param(struct jsm_channel *ch)
 	/*
 	 * If baud rate is zero, flush queues, and set mval to drop DTR.
 	 */
-	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+	if ((ch->ch_c_cflag & CBAUD) == B0) {
 		ch->ch_r_head = ch->ch_r_tail = 0;
 		ch->ch_e_head = ch->ch_e_tail = 0;