diff mbox series

[v2,1/3] arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1

Message ID 20220520160754.1141281-2-judyhsiao@chromium.org
State New
Headers show
Series Add dtsi for sc7280 herobrine boards that using rt5682 codec | expand

Commit Message

Judy Hsiao May 20, 2022, 4:07 p.m. UTC 
1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disbale the pull-up mi2s1_data0, mi2s1_sclk.

Change-Id: Ie227da1076a4343b88b331a937169745fe91902c
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 9cb1bc8ed6b5..6d8744e130b0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -612,6 +612,20 @@  &dp_hot_plug_det {
 	bias-disable;
 };
 
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+};
+
 &pcie1_clkreq_n {
 	bias-pull-up;
 	drive-strength = <2>;