diff mbox series

[v2,1/2] Revert "drm/bridge: anx7625: Use DPI bus type"

Message ID 20220523161520.354687-1-robert.foss@linaro.org
State Superseded
Headers show
Series [v2,1/2] Revert "drm/bridge: anx7625: Use DPI bus type" | expand

Commit Message

Robert Foss May 23, 2022, 4:15 p.m. UTC 
This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1.

This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 0fab2aa47c67..e92eb4a40745 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1623,14 +1623,14 @@  static int anx7625_parse_dt(struct device *dev,
 
 	anx7625_get_swing_setting(dev, pdata);
 
-	pdata->is_dpi = 0; /* default dsi mode */
+	pdata->is_dpi = 1; /* default dpi mode */
 	pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
 	if (!pdata->mipi_host_node) {
 		DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
 		return -ENODEV;
 	}
 
-	bus_type = 0;
+	bus_type = V4L2_FWNODE_BUS_TYPE_PARALLEL;
 	mipi_lanes = MAX_LANES_SUPPORT;
 	ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
 	if (ep0) {
@@ -1641,8 +1641,8 @@  static int anx7625_parse_dt(struct device *dev,
 		of_node_put(ep0);
 	}
 
-	if (bus_type == V4L2_FWNODE_BUS_TYPE_DPI) /* bus type is DPI */
-		pdata->is_dpi = 1;
+	if (bus_type == V4L2_FWNODE_BUS_TYPE_PARALLEL) /* bus type is Parallel(DSI) */
+		pdata->is_dpi = 0;
 
 	pdata->mipi_lanes = mipi_lanes;
 	if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)