diff mbox series

[v4,1/4] KVM: s390: selftests: Use TAP interface in the memop test

Message ID 20220531101554.36844-2-thuth@redhat.com
State Accepted
Commit 97da92c0ff92f33a7c33533e5fdd3e870f01cc6a
Headers show
Series KVM: s390: selftests: Provide TAP output in tests | expand

Commit Message

Thomas Huth May 31, 2022, 10:15 a.m. UTC
The memop test currently does not have any output (unless one of the
TEST_ASSERT statement fails), so it's hard to say for a user whether
a certain new sub-test has been included in the binary or not. Let's
make this a little bit more user-friendly and include some TAP output
via the kselftests.h interface.

Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 tools/testing/selftests/kvm/s390x/memop.c | 95 ++++++++++++++++++-----
 1 file changed, 77 insertions(+), 18 deletions(-)

Comments

Janis Schoetterl-Glausch June 14, 2022, 10:38 a.m. UTC | #1
On 5/31/22 12:15, Thomas Huth wrote:
> The memop test currently does not have any output (unless one of the
> TEST_ASSERT statement fails), so it's hard to say for a user whether
> a certain new sub-test has been included in the binary or not. Let's
> make this a little bit more user-friendly and include some TAP output
> via the kselftests.h interface.
> 
> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  tools/testing/selftests/kvm/s390x/memop.c | 95 ++++++++++++++++++-----
>  1 file changed, 77 insertions(+), 18 deletions(-)
> 
> diff --git a/tools/testing/selftests/kvm/s390x/memop.c b/tools/testing/selftests/kvm/s390x/memop.c
> index 49f26f544127..e704c6fa5758 100644
> --- a/tools/testing/selftests/kvm/s390x/memop.c
> +++ b/tools/testing/selftests/kvm/s390x/memop.c
> @@ -14,6 +14,7 @@
>  

[...]

>  int main(int argc, char *argv[])
>  {
> -	int memop_cap, extension_cap;
> +	int memop_cap, extension_cap, idx;
>  
>  	setbuf(stdout, NULL);	/* Tell stdout not to buffer its content */
>  
> +	ksft_print_header();
> +
>  	memop_cap = kvm_check_cap(KVM_CAP_S390_MEM_OP);
>  	extension_cap = kvm_check_cap(KVM_CAP_S390_MEM_OP_EXTENSION);
>  	if (!memop_cap) {
> -		print_skip("CAP_S390_MEM_OP not supported");
> -		exit(KSFT_SKIP);
> +		ksft_exit_skip("CAP_S390_MEM_OP not supported.\n");
>  	}
>  
> -	test_copy();
> -	if (extension_cap > 0) {
> -		test_copy_key();
> -		test_copy_key_storage_prot_override();
> -		test_copy_key_fetch_prot();
> -		test_copy_key_fetch_prot_override();
> -		test_errors_key();
> -		test_termination();
> -		test_errors_key_storage_prot_override();
> -		test_errors_key_fetch_prot_override_not_enabled();
> -		test_errors_key_fetch_prot_override_enabled();
> -	} else {
> -		print_skip("storage key memop extension not supported");
> +	ksft_set_plan(ARRAY_SIZE(testlist));
> +
> +	for (idx = 0; idx < ARRAY_SIZE(testlist); idx++) {
> +		if (testlist[idx].extension >= extension_cap) {

This is reversed, should be

   		if (testlist[idx].extension <= extension_cap) {
or
		if (extension_cap >= testlist[idx].extension) {

I'd prefer the latter.

> +			testlist[idx].test();
> +			ksft_test_result_pass("%s\n", testlist[idx].name);
> +		} else {
> +			ksft_test_result_skip("%s - extension level %d not supported\n",
> +					      testlist[idx].name,
> +					      testlist[idx].extension);
> +		}
>  	}
> -	test_errors();
>  
> -	return 0;
> +	ksft_finished();	/* Print results and exit() accordingly */
>  }
Thomas Huth June 14, 2022, 2:24 p.m. UTC | #2
On 14/06/2022 12.38, Janis Schoetterl-Glausch wrote:
> On 5/31/22 12:15, Thomas Huth wrote:
>> The memop test currently does not have any output (unless one of the
>> TEST_ASSERT statement fails), so it's hard to say for a user whether
>> a certain new sub-test has been included in the binary or not. Let's
>> make this a little bit more user-friendly and include some TAP output
>> via the kselftests.h interface.
>>
>> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>>   tools/testing/selftests/kvm/s390x/memop.c | 95 ++++++++++++++++++-----
>>   1 file changed, 77 insertions(+), 18 deletions(-)
>>
>> diff --git a/tools/testing/selftests/kvm/s390x/memop.c b/tools/testing/selftests/kvm/s390x/memop.c
>> index 49f26f544127..e704c6fa5758 100644
>> --- a/tools/testing/selftests/kvm/s390x/memop.c
>> +++ b/tools/testing/selftests/kvm/s390x/memop.c
>> @@ -14,6 +14,7 @@
>>   
> 
> [...]
> 
>>   int main(int argc, char *argv[])
>>   {
>> -	int memop_cap, extension_cap;
>> +	int memop_cap, extension_cap, idx;
>>   
>>   	setbuf(stdout, NULL);	/* Tell stdout not to buffer its content */
>>   
>> +	ksft_print_header();
>> +
>>   	memop_cap = kvm_check_cap(KVM_CAP_S390_MEM_OP);
>>   	extension_cap = kvm_check_cap(KVM_CAP_S390_MEM_OP_EXTENSION);
>>   	if (!memop_cap) {
>> -		print_skip("CAP_S390_MEM_OP not supported");
>> -		exit(KSFT_SKIP);
>> +		ksft_exit_skip("CAP_S390_MEM_OP not supported.\n");
>>   	}
>>   
>> -	test_copy();
>> -	if (extension_cap > 0) {
>> -		test_copy_key();
>> -		test_copy_key_storage_prot_override();
>> -		test_copy_key_fetch_prot();
>> -		test_copy_key_fetch_prot_override();
>> -		test_errors_key();
>> -		test_termination();
>> -		test_errors_key_storage_prot_override();
>> -		test_errors_key_fetch_prot_override_not_enabled();
>> -		test_errors_key_fetch_prot_override_enabled();
>> -	} else {
>> -		print_skip("storage key memop extension not supported");
>> +	ksft_set_plan(ARRAY_SIZE(testlist));
>> +
>> +	for (idx = 0; idx < ARRAY_SIZE(testlist); idx++) {
>> +		if (testlist[idx].extension >= extension_cap) {
> 
> This is reversed, should be
> 
>     		if (testlist[idx].extension <= extension_cap) {
> or
> 		if (extension_cap >= testlist[idx].extension) {

Drat! The patch is already in Paolo's queue ... could you please send a 
patch to fix this, so that Paolo can either squash it (not sure whether 
that's still feasible) or queue it, too?

> I'd prefer the latter.

Me too.

  Thanks,
   Thomas
diff mbox series

Patch

diff --git a/tools/testing/selftests/kvm/s390x/memop.c b/tools/testing/selftests/kvm/s390x/memop.c
index 49f26f544127..e704c6fa5758 100644
--- a/tools/testing/selftests/kvm/s390x/memop.c
+++ b/tools/testing/selftests/kvm/s390x/memop.c
@@ -14,6 +14,7 @@ 
 
 #include "test_util.h"
 #include "kvm_util.h"
+#include "kselftest.h"
 
 enum mop_target {
 	LOGICAL,
@@ -691,34 +692,92 @@  static void test_errors(void)
 	kvm_vm_free(t.kvm_vm);
 }
 
+struct testdef {
+	const char *name;
+	void (*test)(void);
+	int extension;
+} testlist[] = {
+	{
+		.name = "simple copy",
+		.test = test_copy,
+	},
+	{
+		.name = "generic error checks",
+		.test = test_errors,
+	},
+	{
+		.name = "copy with storage keys",
+		.test = test_copy_key,
+		.extension = 1,
+	},
+	{
+		.name = "copy with key storage protection override",
+		.test = test_copy_key_storage_prot_override,
+		.extension = 1,
+	},
+	{
+		.name = "copy with key fetch protection",
+		.test = test_copy_key_fetch_prot,
+		.extension = 1,
+	},
+	{
+		.name = "copy with key fetch protection override",
+		.test = test_copy_key_fetch_prot_override,
+		.extension = 1,
+	},
+	{
+		.name = "error checks with key",
+		.test = test_errors_key,
+		.extension = 1,
+	},
+	{
+		.name = "termination",
+		.test = test_termination,
+		.extension = 1,
+	},
+	{
+		.name = "error checks with key storage protection override",
+		.test = test_errors_key_storage_prot_override,
+		.extension = 1,
+	},
+	{
+		.name = "error checks without key fetch prot override",
+		.test = test_errors_key_fetch_prot_override_not_enabled,
+		.extension = 1,
+	},
+	{
+		.name = "error checks with key fetch prot override",
+		.test = test_errors_key_fetch_prot_override_enabled,
+		.extension = 1,
+	},
+};
+
 int main(int argc, char *argv[])
 {
-	int memop_cap, extension_cap;
+	int memop_cap, extension_cap, idx;
 
 	setbuf(stdout, NULL);	/* Tell stdout not to buffer its content */
 
+	ksft_print_header();
+
 	memop_cap = kvm_check_cap(KVM_CAP_S390_MEM_OP);
 	extension_cap = kvm_check_cap(KVM_CAP_S390_MEM_OP_EXTENSION);
 	if (!memop_cap) {
-		print_skip("CAP_S390_MEM_OP not supported");
-		exit(KSFT_SKIP);
+		ksft_exit_skip("CAP_S390_MEM_OP not supported.\n");
 	}
 
-	test_copy();
-	if (extension_cap > 0) {
-		test_copy_key();
-		test_copy_key_storage_prot_override();
-		test_copy_key_fetch_prot();
-		test_copy_key_fetch_prot_override();
-		test_errors_key();
-		test_termination();
-		test_errors_key_storage_prot_override();
-		test_errors_key_fetch_prot_override_not_enabled();
-		test_errors_key_fetch_prot_override_enabled();
-	} else {
-		print_skip("storage key memop extension not supported");
+	ksft_set_plan(ARRAY_SIZE(testlist));
+
+	for (idx = 0; idx < ARRAY_SIZE(testlist); idx++) {
+		if (testlist[idx].extension >= extension_cap) {
+			testlist[idx].test();
+			ksft_test_result_pass("%s\n", testlist[idx].name);
+		} else {
+			ksft_test_result_skip("%s - extension level %d not supported\n",
+					      testlist[idx].name,
+					      testlist[idx].extension);
+		}
 	}
-	test_errors();
 
-	return 0;
+	ksft_finished();	/* Print results and exit() accordingly */
 }