| Message ID | 20220617164000.v8.1.Id769ddc5dbf570ccb511db96da59f97d08f75a9c@changeid |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v8,1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files | expand |
Hi, On Fri, Jun 17, 2022 at 4:40 PM Joseph S. Barrera III <joebar@chromium.org> wrote: > > Wormdingler is a trogdor-based board, shipping to customers as the > Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from > the downstream Chrome OS 5.4 kernel, but with the camera > (sc7180-trogdor-mipi-camera.dtsi) #include removed. > > Signed-off-by: Joseph S. Barrera III <joebar@chromium.org> > > --- > > (no changes since v7) > > Changes in v7: > - Incorporated changes from Stephen's "Simplify!" series. > > Changes in v5: > - Replaced _ in node name with - > - Ordered nodes by name > > Changes in v4: > - Cleaned up rt5682s files > - Restored camcc definition > - Added missing version history > > Changes in v3: > - Removed camcc definition > > Changes in v2: > - Word wrapped patch description. > - Removed "Author" from patch description. > - Fixed whitespace around "en_pp3300_dx_edp" > > arch/arm64/boot/dts/qcom/Makefile | 6 + > .../sc7180-trogdor-wormdingler-rev0-boe.dts | 22 + > .../sc7180-trogdor-wormdingler-rev0-inx.dts | 22 + > .../qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 53 +++ > ...0-trogdor-wormdingler-rev1-boe-rt5682s.dts | 29 ++ > .../sc7180-trogdor-wormdingler-rev1-boe.dts | 28 ++ > ...0-trogdor-wormdingler-rev1-inx-rt5682s.dts | 29 ++ > .../sc7180-trogdor-wormdingler-rev1-inx.dts | 22 + > .../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 408 ++++++++++++++++++ > 9 files changed, 619 insertions(+) Something in this patch series you need to talk about how you relate to Stephen's two patches, AKA 1. https://lore.kernel.org/all/20220602190621.1646679-1-swboyd@chromium.org/ - arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar 2. https://lore.kernel.org/all/20220518172525.3319993-1-swboyd@chromium.org/ - arm64: dts: qcom: sc7180-trogdor: Split out keyboard node and describe detachables Probably that should be in a cover letter. At the moment, it looks as if you are assuming that patch #1 is there but you're assuming patch #2 _isn't_ there. Is that correct? -Doug
Hi, On Fri, Jun 17, 2022 at 4:40 PM Joseph S. Barrera III <joebar@chromium.org> wrote: > > Pazquel is a trogdor-based board. These dts files are unchanged copies > from the downstream Chrome OS 5.4 kernel. > > Signed-off-by: Joseph S. Barrera III <joebar@chromium.org> > Reviewed-by: Douglas Anderson <dianders@chromium.org> > --- > > (no changes since v7) > > Changes in v7: > - Incorporated changes from Stephen's "Simplify!" series. You missed an important bit here. Pazquel has a trackpad, doesn't it? In the "Simplify!" series Stephen made it so that devices that have a trackpad need to enable it, right? > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 5cfd6316768c..dc26704dfe34 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -79,6 +79,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts > new file mode 100644 > index 000000000000..ecedab8d1662 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts > @@ -0,0 +1,22 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Google Pazquel board device tree source > + * > + * Copyright 2021 Google LLC. > + */ > + > +/dts-v1/; > + > +#include "sc7180.dtsi" This is not good and was an important part of "Simplify!" sc7180.dtsi should only be included by sc7180-trogdor.dtsi. > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi > new file mode 100644 > index 000000000000..5991c94b4aa1 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi > @@ -0,0 +1,218 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Google Pazquel board device tree source > + * > + * Copyright 2021 Google LLC. > + */ > + > +#include "sc7180-trogdor.dtsi" > + > +&ap_sar_sensor { > + compatible = "semtech,sx9324"; > + semtech,ph0-pin = <1 3 3>; > + semtech,ph1-pin = <3 1 3>; > + semtech,ph2-pin = <1 3 3>; > + semtech,ph3-pin = <0 0 0>; > + semtech,ph01-resolution = <1024>; > + semtech,ph23-resolution = <1024>; > + semtech,startup-sensor = <1>; > + semtech,ph01-proxraw-strength = <3>; > + semtech,ph23-proxraw-strength = <1>; > + semtech,avg-pos-strength = <128>; You seem to be missing the recent downstream changes here. semtech,input-analog-gain = <0>; semtech,cs-idle-sleep = "gnd"; You had this right in one of your two v6 series. Not sure why you keep regressing random things each version... -Doug
On 17/06/2022 16:40, Joseph S. Barrera III wrote: > Wormdingler is a trogdor-based board, shipping to customers as the > Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from > the downstream Chrome OS 5.4 kernel, but with the camera > (sc7180-trogdor-mipi-camera.dtsi) #include removed. > > Signed-off-by: Joseph S. Barrera III <joebar@chromium.org> > > --- > > (no changes since v7) > > Changes in v7: > - Incorporated changes from Stephen's "Simplify!" series. > > Changes in v5: > - Replaced _ in node name with - > - Ordered nodes by name > > Changes in v4: > - Cleaned up rt5682s files > - Restored camcc definition > - Added missing version history > > Changes in v3: > - Removed camcc definition > > Changes in v2: > - Word wrapped patch description. > - Removed "Author" from patch description. > - Fixed whitespace around "en_pp3300_dx_edp" > > arch/arm64/boot/dts/qcom/Makefile | 6 + > .../sc7180-trogdor-wormdingler-rev0-boe.dts | 22 + > .../sc7180-trogdor-wormdingler-rev0-inx.dts | 22 + > .../qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 53 +++ > ...0-trogdor-wormdingler-rev1-boe-rt5682s.dts | 29 ++ > .../sc7180-trogdor-wormdingler-rev1-boe.dts | 28 ++ > ...0-trogdor-wormdingler-rev1-inx-rt5682s.dts | 29 ++ > .../sc7180-trogdor-wormdingler-rev1-inx.dts | 22 + > .../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 408 ++++++++++++++++++ > 9 files changed, 619 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts > create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 2f8aec2cc6db..e4114e22548a 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -81,6 +81,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts > new file mode 100644 > index 000000000000..d6ed7d0afe4a > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts > @@ -0,0 +1,22 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Google Wormdingler board device tree source > + * > + * Copyright 2021 Google LLC. > + * > + * SKU: 0x10 => 16 > + * - bits 7..4: Panel ID: 0x1 (BOE) > + */ > + > +/dts-v1/; > + > +#include "sc7180-trogdor-wormdingler-rev0.dtsi" > + > +/ { > + model = "Google Wormdingler rev0 BOE panel board"; > + compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; There was a v6 a second ago, now it is v8... It's confusing. Don't send too often, especially without incorporating actual review. You need to document the compatibles. Please base on Doug's patches adding the compatibles for existing boards. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2f8aec2cc6db..e4114e22548a 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -81,6 +81,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts new file mode 100644 index 000000000000..d6ed7d0afe4a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x10 => 16 + * - bits 7..4: Panel ID: 0x1 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 BOE panel board"; + compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts new file mode 100644 index 000000000000..c03525ea64ca --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0 => 0 + * - bits 7..4: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 INX panel board"; + compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi new file mode 100644 index 000000000000..db29e0cba29d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +&avdd_lcd { + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; +}; + +&panel { + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; +}; + +&v1p8_mipi { + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ +&avdd_lcd_en { + pinmux { + pins = "gpio80"; + }; + + pinconf { + pins = "gpio80"; + }; +}; + +&mipi_1800_en { + pinmux { + pins = "gpio81"; + }; + + pinconf { + pins = "gpio81"; + }; +}; +&vdd_reset_1800 { + pinmux { + pins = "gpio76"; + }; + + pinconf { + pins = "gpio76"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts new file mode 100644 index 000000000000..aa605885c371 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x401 => 1025 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-boe.dts" + +/ { + model = "Google Wormdingler rev1+ (BOE, rt5682s)"; + compatible = "google,wormdingler-sku1025", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts new file mode 100644 index 000000000000..c5b0658bd632 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x400 => 1024 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ BOE panel board"; + compatible = "google,wormdingler-sku1024", "qcom,sc7180"; +}; + +&dsi_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-drive-ldo-level = <450>; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts new file mode 100644 index 000000000000..7116c44c8d85 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0001 => 1 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-inx.dts" + +/ { + model = "Google Wormdingler rev1+ (INX, rt5682s)"; + compatible = "google,wormdingler-sku1", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts new file mode 100644 index 000000000000..dd34a2297ea0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0000 => 0 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ INX panel board"; + compatible = "google,wormdingler-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi new file mode 100644 index 000000000000..701dd11a12cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/ { + avdd_lcd: avdd-lcd { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + avee_lcd: avee-lcd { + compatible = "regulator-fixed"; + regulator-name = "avee_lcd"; + + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avee_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + pp1800_ts: + v1p8_mipi: v1p8-mipi { + compatible = "regulator-fixed"; + regulator-name = "v1p8_mipi"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&mipi_1800_en>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <574>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <62500>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <68000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + base_detection: cbas { + compatible = "google,cros-cbas"; + }; +}; + +&dsi0 { + + panel: panel@0 { + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_reset_1800>; + avdd-supply = <&avdd_lcd>; + avee-supply = <&avee_lcd>; + pp1800-supply = <&v1p8_mipi>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@1 { + compatible = "hid-over-i2c"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + vddl-supply = <&pp1800_ts>; + }; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_WORMDINGLER"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio85"; + }; + + pinconf { + pins = "gpio85"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "", + "", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "", + "ID0", + "", + "ID1", + "", + "", + "", + "CODEC_PWR_EN", + "HUB_EN", + "TP_EN", + "MIPI_1.8V_EN", + "VDD_RESET_1.8V", + "AVDD_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + avdd_lcd_en: avdd-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + avee_lcd_en: avee-lcd-en { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + mipi_1800_en: mipi-1800-en { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; + + vdd_reset_1800: vdd-reset-1800 { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +};
Wormdingler is a trogdor-based board, shipping to customers as the Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from the downstream Chrome OS 5.4 kernel, but with the camera (sc7180-trogdor-mipi-camera.dtsi) #include removed. Signed-off-by: Joseph S. Barrera III <joebar@chromium.org> --- (no changes since v7) Changes in v7: - Incorporated changes from Stephen's "Simplify!" series. Changes in v5: - Replaced _ in node name with - - Ordered nodes by name Changes in v4: - Cleaned up rt5682s files - Restored camcc definition - Added missing version history Changes in v3: - Removed camcc definition Changes in v2: - Word wrapped patch description. - Removed "Author" from patch description. - Fixed whitespace around "en_pp3300_dx_edp" arch/arm64/boot/dts/qcom/Makefile | 6 + .../sc7180-trogdor-wormdingler-rev0-boe.dts | 22 + .../sc7180-trogdor-wormdingler-rev0-inx.dts | 22 + .../qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 53 +++ ...0-trogdor-wormdingler-rev1-boe-rt5682s.dts | 29 ++ .../sc7180-trogdor-wormdingler-rev1-boe.dts | 28 ++ ...0-trogdor-wormdingler-rev1-inx-rt5682s.dts | 29 ++ .../sc7180-trogdor-wormdingler-rev1-inx.dts | 22 + .../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 408 ++++++++++++++++++ 9 files changed, 619 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi