diff mbox series

[v2] arm64: freescale/imx8mp-evk.dts: reorder nodes alphabetically

Message ID 20220617173254.340007-1-u.kleine-koenig@pengutronix.de
State New
Headers show
Series [v2] arm64: freescale/imx8mp-evk.dts: reorder nodes alphabetically | expand

Commit Message

Uwe Kleine-König June 17, 2022, 5:32 p.m. UTC 
The nodes after the root nodes are supposed to be ordered
alphabetically. There is however an expection for &pinctrl that some
consider to be good placed at the end of the file. So only move flexcan1
and flexcan2 to their proper place.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
(implicit) v1 was send a year ago and also moved pinctrl. Just stumbled
over this mail and the concerns back then that pinctrl is good at the
end. I don't fully agree, but here comes at least the non-disputed part
of the patch.

Reference: https://lore.kernel.org/linux-arm-kernel/20210707105309.1693138-1-u.kleine-koenig@pengutronix.de

Best regards
Uwe

 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 28 ++++++++++----------
 1 file changed, 14 insertions(+), 14 deletions(-)


base-commit: b13baccc3850ca8b8cccbf8ed9912dbaa0fdf7f3
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 4c3ac4214a2c..97e91db08ae8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -67,20 +67,6 @@  reg_usdhc2_vmmc: regulator-usdhc2 {
 	};
 };
 
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_stby>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_stby>;
-	status = "disabled";/* can2 pin conflict with pdm */
-};
-
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -197,6 +183,20 @@  ethphy1: ethernet-phy@1 {
 	};
 };
 
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "disabled";/* can2 pin conflict with pdm */
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";