| Message ID | 20220626125238.57479-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | e7fd2e6b9772e19f4da2a7c0c7c813758aee7a88 |
| Headers | show |
| Series | dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema | expand |
On 22. 6. 26. 21:52, Krzysztof Kozlowski wrote: > Convert the Samsung Exynos SoC Bus and Interconnect bindings to DT > schema. > > Vast parts of descritpion and example were copied, so keep license as > GPL-2.0-only. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/devfreq/exynos-bus.txt | 488 ------------------ > .../interconnect/samsung,exynos-bus.yaml | 290 +++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 291 insertions(+), 489 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt > create mode 100644 Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml > > diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt > deleted file mode 100644 > index bcaa2c08ac11..000000000000 > --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt > +++ /dev/null > @@ -1,488 +0,0 @@ > -* Generic Exynos Bus frequency device > - > -The Samsung Exynos SoC has many buses for data transfer between DRAM > -and sub-blocks in SoC. Most Exynos SoCs share the common architecture > -for buses. Generally, each bus of Exynos SoC includes a source clock > -and a power line, which are able to change the clock frequency > -of the bus in runtime. To monitor the usage of each bus in runtime, > -the driver uses the PPMU (Platform Performance Monitoring Unit), which > -is able to measure the current load of sub-blocks. > - > -The Exynos SoC includes the various sub-blocks which have the each AXI bus. > -The each AXI bus has the owned source clock but, has not the only owned > -power line. The power line might be shared among one more sub-blocks. > -So, we can divide into two type of device as the role of each sub-block. > -There are two type of bus devices as following: > -- parent bus device > -- passive bus device > - > -Basically, parent and passive bus device share the same power line. > -The parent bus device can only change the voltage of shared power line > -and the rest bus devices (passive bus device) depend on the decision of > -the parent bus device. If there are three blocks which share the VDD_xxx > -power line, Only one block should be parent device and then the rest blocks > -should depend on the parent device as passive device. > - > - VDD_xxx |--- A block (parent) > - |--- B block (passive) > - |--- C block (passive) > - > -There are a little different composition among Exynos SoC because each Exynos > -SoC has different sub-blocks. Therefore, such difference should be specified > -in devicetree file instead of each device driver. In result, this driver > -is able to support the bus frequency for all Exynos SoCs. > - > -Required properties for all bus devices: > -- compatible: Should be "samsung,exynos-bus". > -- clock-names : the name of clock used by the bus, "bus". > -- clocks : phandles for clock specified in "clock-names" property. > -- operating-points-v2: the OPP table including frequency/voltage information > - to support DVFS (Dynamic Voltage/Frequency Scaling) feature. > - > -Required properties only for parent bus device: > -- vdd-supply: the regulator to provide the buses with the voltage. > -- devfreq-events: the devfreq-event device to monitor the current utilization > - of buses. > - > -Required properties only for passive bus device: > -- devfreq: the parent bus device. > - > -Optional properties only for parent bus device: > -- exynos,saturation-ratio: the percentage value which is used to calibrate > - the performance count against total cycle count. > - > -Optional properties for the interconnect functionality (QoS frequency > -constraints): > -- #interconnect-cells: should be 0. > -- interconnects: as documented in ../interconnect.txt, describes a path at the > - higher level interconnects used by this interconnect provider. > - If this interconnect provider is directly linked to a top level interconnect > - provider the property contains only one phandle. The provider extends > - the interconnect graph by linking its node to a node registered by provider > - pointed to by first phandle in the 'interconnects' property. > - > -- samsung,data-clock-ratio: ratio of the data throughput in B/s to minimum data > - clock frequency in Hz, default value is 8 when this property is missing. > - > -Detailed correlation between sub-blocks and power line according to Exynos SoC: > -- In case of Exynos3250, there are two power line as following: > - VDD_MIF |--- DMC > - > - VDD_INT |--- LEFTBUS (parent device) > - |--- PERIL > - |--- MFC > - |--- G3D > - |--- RIGHTBUS > - |--- PERIR > - |--- FSYS > - |--- LCD0 > - |--- PERIR > - |--- ISP > - |--- CAM > - > -- In case of Exynos4210, there is one power line as following: > - VDD_INT |--- DMC (parent device) > - |--- LEFTBUS > - |--- PERIL > - |--- MFC(L) > - |--- G3D > - |--- TV > - |--- LCD0 > - |--- RIGHTBUS > - |--- PERIR > - |--- MFC(R) > - |--- CAM > - |--- FSYS > - |--- GPS > - |--- LCD0 > - |--- LCD1 > - > -- In case of Exynos4x12, there are two power line as following: > - VDD_MIF |--- DMC > - > - VDD_INT |--- LEFTBUS (parent device) > - |--- PERIL > - |--- MFC(L) > - |--- G3D > - |--- TV > - |--- IMAGE > - |--- RIGHTBUS > - |--- PERIR > - |--- MFC(R) > - |--- CAM > - |--- FSYS > - |--- GPS > - |--- LCD0 > - |--- ISP > - > -- In case of Exynos5422, there are two power line as following: > - VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) > - |--- DREX 1 > - > - VDD_INT |--- NoC_Core (parent device) > - |--- G2D > - |--- G3D > - |--- DISP1 > - |--- NoC_WCORE > - |--- GSCL > - |--- MSCL > - |--- ISP > - |--- MFC > - |--- GEN > - |--- PERIS > - |--- PERIC > - |--- FSYS > - |--- FSYS2 > - > -- In case of Exynos5433, there is VDD_INT power line as following: > - VDD_INT |--- G2D (parent device) > - |--- MSCL > - |--- GSCL > - |--- JPEG > - |--- MFC > - |--- HEVC > - |--- BUS0 > - |--- BUS1 > - |--- BUS2 > - |--- PERIS (Fixed clock rate) > - |--- PERIC (Fixed clock rate) > - |--- FSYS (Fixed clock rate) > - > -Example 1: > - Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to > - power line (regulator). The MIF (Memory Interface) AXI bus is used to > - transfer data between DRAM and CPU and uses the VDD_MIF regulator. > - > - - MIF (Memory Interface) block > - : VDD_MIF |--- DMC (Dynamic Memory Controller) > - > - - INT (Internal) block > - : VDD_INT |--- LEFTBUS (parent device) > - |--- PERIL > - |--- MFC > - |--- G3D > - |--- RIGHTBUS > - |--- FSYS > - |--- LCD0 > - |--- PERIR > - |--- ISP > - |--- CAM > - > - - MIF bus's frequency/voltage table > - ----------------------- > - |Lv| Freq | Voltage | > - ----------------------- > - |L1| 50000 |800000 | > - |L2| 100000 |800000 | > - |L3| 134000 |800000 | > - |L4| 200000 |825000 | > - |L5| 400000 |875000 | > - ----------------------- > - > - - INT bus's frequency/voltage table > - ---------------------------------------------------------- > - |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | > - | name| |LCD0 | | | || | > - | | |FSYS | | | || | > - | | |MFC | | | || | > - ---------------------------------------------------------- > - |Mode |*parent|passive |passive|passive|passive|| | > - ---------------------------------------------------------- > - |Lv |Frequency ||Voltage | > - ---------------------------------------------------------- > - |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | > - |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | > - |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | > - |L4 |134000 |134000 |200000 |200000 | ||1000000 | > - |L5 |200000 |200000 |400000 |300000 | ||1000000 | > - ---------------------------------------------------------- > - > -Example 2: > - The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi > - is listed below: > - > - bus_dmc: bus_dmc { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu_dmc CLK_DIV_DMC>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_dmc_opp_table>; > - status = "disabled"; > - }; > - > - bus_dmc_opp_table: opp_table1 { > - compatible = "operating-points-v2"; > - opp-shared; > - > - opp-50000000 { > - opp-hz = /bits/ 64 <50000000>; > - opp-microvolt = <800000>; > - }; > - opp-100000000 { > - opp-hz = /bits/ 64 <100000000>; > - opp-microvolt = <800000>; > - }; > - opp-134000000 { > - opp-hz = /bits/ 64 <134000000>; > - opp-microvolt = <800000>; > - }; > - opp-200000000 { > - opp-hz = /bits/ 64 <200000000>; > - opp-microvolt = <825000>; > - }; > - opp-400000000 { > - opp-hz = /bits/ 64 <400000000>; > - opp-microvolt = <875000>; > - }; > - }; > - > - bus_leftbus: bus_leftbus { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_DIV_GDL>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_leftbus_opp_table>; > - status = "disabled"; > - }; > - > - bus_rightbus: bus_rightbus { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_DIV_GDR>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_leftbus_opp_table>; > - status = "disabled"; > - }; > - > - bus_lcd0: bus_lcd0 { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_DIV_ACLK_160>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_leftbus_opp_table>; > - status = "disabled"; > - }; > - > - bus_fsys: bus_fsys { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_DIV_ACLK_200>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_leftbus_opp_table>; > - status = "disabled"; > - }; > - > - bus_mcuisp: bus_mcuisp { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_mcuisp_opp_table>; > - status = "disabled"; > - }; > - > - bus_isp: bus_isp { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_DIV_ACLK_266>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_isp_opp_table>; > - status = "disabled"; > - }; > - > - bus_peril: bus_peril { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_DIV_ACLK_100>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_peril_opp_table>; > - status = "disabled"; > - }; > - > - bus_mfc: bus_mfc { > - compatible = "samsung,exynos-bus"; > - clocks = <&cmu CLK_SCLK_MFC>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_leftbus_opp_table>; > - status = "disabled"; > - }; > - > - bus_leftbus_opp_table: opp_table1 { > - compatible = "operating-points-v2"; > - opp-shared; > - > - opp-50000000 { > - opp-hz = /bits/ 64 <50000000>; > - opp-microvolt = <900000>; > - }; > - opp-80000000 { > - opp-hz = /bits/ 64 <80000000>; > - opp-microvolt = <900000>; > - }; > - opp-100000000 { > - opp-hz = /bits/ 64 <100000000>; > - opp-microvolt = <1000000>; > - }; > - opp-134000000 { > - opp-hz = /bits/ 64 <134000000>; > - opp-microvolt = <1000000>; > - }; > - opp-200000000 { > - opp-hz = /bits/ 64 <200000000>; > - opp-microvolt = <1000000>; > - }; > - }; > - > - bus_mcuisp_opp_table: opp_table2 { > - compatible = "operating-points-v2"; > - opp-shared; > - > - opp-50000000 { > - opp-hz = /bits/ 64 <50000000>; > - }; > - opp-80000000 { > - opp-hz = /bits/ 64 <80000000>; > - }; > - opp-100000000 { > - opp-hz = /bits/ 64 <100000000>; > - }; > - opp-200000000 { > - opp-hz = /bits/ 64 <200000000>; > - }; > - opp-400000000 { > - opp-hz = /bits/ 64 <400000000>; > - }; > - }; > - > - bus_isp_opp_table: opp_table3 { > - compatible = "operating-points-v2"; > - opp-shared; > - > - opp-50000000 { > - opp-hz = /bits/ 64 <50000000>; > - }; > - opp-80000000 { > - opp-hz = /bits/ 64 <80000000>; > - }; > - opp-100000000 { > - opp-hz = /bits/ 64 <100000000>; > - }; > - opp-200000000 { > - opp-hz = /bits/ 64 <200000000>; > - }; > - opp-300000000 { > - opp-hz = /bits/ 64 <300000000>; > - }; > - }; > - > - bus_peril_opp_table: opp_table4 { > - compatible = "operating-points-v2"; > - opp-shared; > - > - opp-50000000 { > - opp-hz = /bits/ 64 <50000000>; > - }; > - opp-80000000 { > - opp-hz = /bits/ 64 <80000000>; > - }; > - opp-100000000 { > - opp-hz = /bits/ 64 <100000000>; > - }; > - }; > - > - > - Usage case to handle the frequency and voltage of bus on runtime > - in exynos3250-rinato.dts is listed below: > - > - &bus_dmc { > - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; > - vdd-supply = <&buck1_reg>; /* VDD_MIF */ > - status = "okay"; > - }; > - > - &bus_leftbus { > - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; > - vdd-supply = <&buck3_reg>; > - status = "okay"; > - }; > - > - &bus_rightbus { > - devfreq = <&bus_leftbus>; > - status = "okay"; > - }; > - > - &bus_lcd0 { > - devfreq = <&bus_leftbus>; > - status = "okay"; > - }; > - > - &bus_fsys { > - devfreq = <&bus_leftbus>; > - status = "okay"; > - }; > - > - &bus_mcuisp { > - devfreq = <&bus_leftbus>; > - status = "okay"; > - }; > - > - &bus_isp { > - devfreq = <&bus_leftbus>; > - status = "okay"; > - }; > - > - &bus_peril { > - devfreq = <&bus_leftbus>; > - status = "okay"; > - }; > - > - &bus_mfc { > - devfreq = <&bus_leftbus>; > - status = "okay"; > - }; > - > -Example 3: > - An interconnect path "bus_display -- bus_leftbus -- bus_dmc" on > - Exynos4412 SoC with video mixer as an interconnect consumer device. > - > - soc { > - bus_dmc: bus_dmc { > - compatible = "samsung,exynos-bus"; > - clocks = <&clock CLK_DIV_DMC>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_dmc_opp_table>; > - samsung,data-clock-ratio = <4>; > - #interconnect-cells = <0>; > - }; > - > - bus_leftbus: bus_leftbus { > - compatible = "samsung,exynos-bus"; > - clocks = <&clock CLK_DIV_GDL>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_leftbus_opp_table>; > - #interconnect-cells = <0>; > - interconnects = <&bus_dmc>; > - }; > - > - bus_display: bus_display { > - compatible = "samsung,exynos-bus"; > - clocks = <&clock CLK_ACLK160>; > - clock-names = "bus"; > - operating-points-v2 = <&bus_display_opp_table>; > - #interconnect-cells = <0>; > - interconnects = <&bus_leftbus &bus_dmc>; > - }; > - > - bus_dmc_opp_table: opp_table1 { > - compatible = "operating-points-v2"; > - /* ... */ > - } > - > - bus_leftbus_opp_table: opp_table3 { > - compatible = "operating-points-v2"; > - /* ... */ > - }; > - > - bus_display_opp_table: opp_table4 { > - compatible = "operating-points-v2"; > - /* .. */ > - }; > - > - &mixer { > - compatible = "samsung,exynos4212-mixer"; > - interconnects = <&bus_display &bus_dmc>; > - /* ... */ > - }; > - }; > diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml > new file mode 100644 > index 000000000000..ad9ed596dfef > --- /dev/null > +++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml > @@ -0,0 +1,290 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung Exynos SoC Bus and Interconnect > + > +maintainers: > + - Chanwoo Choi <cw00.choi@samsung.com> > + - Krzysztof Kozlowski <krzk@kernel.org> > + > +description: | > + The Samsung Exynos SoC has many buses for data transfer between DRAM and > + sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses. > + Generally, each bus of Exynos SoC includes a source clock and a power line, > + which are able to change the clock frequency of the bus in runtime. To > + monitor the usage of each bus in runtime, the driver uses the PPMU (Platform > + Performance Monitoring Unit), which is able to measure the current load of > + sub-blocks. > + > + The Exynos SoC includes the various sub-blocks which have the each AXI bus. > + The each AXI bus has the owned source clock but, has not the only owned power > + line. The power line might be shared among one more sub-blocks. So, we can > + divide into two type of device as the role of each sub-block. There are two > + type of bus devices as following:: > + - parent bus device > + - passive bus device > + > + Basically, parent and passive bus device share the same power line. The > + parent bus device can only change the voltage of shared power line and the > + rest bus devices (passive bus device) depend on the decision of the parent > + bus device. If there are three blocks which share the VDD_xxx power line, > + Only one block should be parent device and then the rest blocks should depend > + on the parent device as passive device. > + > + VDD_xxx |--- A block (parent) > + |--- B block (passive) > + |--- C block (passive) > + > + There are a little different composition among Exynos SoC because each Exynos > + SoC has different sub-blocks. Therefore, such difference should be specified > + in devicetree file instead of each device driver. In result, this driver is > + able to support the bus frequency for all Exynos SoCs. > + > + Detailed correlation between sub-blocks and power line according > + to Exynos SoC:: > + - In case of Exynos3250, there are two power line as following:: > + VDD_MIF |--- DMC (Dynamic Memory Controller) > + > + VDD_INT |--- LEFTBUS (parent device) > + |--- PERIL > + |--- MFC > + |--- G3D > + |--- RIGHTBUS > + |--- PERIR > + |--- FSYS > + |--- LCD0 > + |--- PERIR > + |--- ISP > + |--- CAM > + > + - MIF bus's frequency/voltage table > + ----------------------- > + |Lv| Freq | Voltage | > + ----------------------- > + |L1| 50000 |800000 | > + |L2| 100000 |800000 | > + |L3| 134000 |800000 | > + |L4| 200000 |825000 | > + |L5| 400000 |875000 | > + ----------------------- > + > + - INT bus's frequency/voltage table > + ---------------------------------------------------------- > + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | > + | name| |LCD0 | | | || | > + | | |FSYS | | | || | > + | | |MFC | | | || | > + ---------------------------------------------------------- > + |Mode |*parent|passive |passive|passive|passive|| | > + ---------------------------------------------------------- > + |Lv |Frequency ||Voltage | > + ---------------------------------------------------------- > + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | > + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | > + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | > + |L4 |134000 |134000 |200000 |200000 | ||1000000 | > + |L5 |200000 |200000 |400000 |300000 | ||1000000 | > + ---------------------------------------------------------- > + > + - In case of Exynos4210, there is one power line as following:: > + VDD_INT |--- DMC (parent device, Dynamic Memory Controller) > + |--- LEFTBUS > + |--- PERIL > + |--- MFC(L) > + |--- G3D > + |--- TV > + |--- LCD0 > + |--- RIGHTBUS > + |--- PERIR > + |--- MFC(R) > + |--- CAM > + |--- FSYS > + |--- GPS > + |--- LCD0 > + |--- LCD1 > + > + - In case of Exynos4x12, there are two power line as following:: > + VDD_MIF |--- DMC (Dynamic Memory Controller) > + > + VDD_INT |--- LEFTBUS (parent device) > + |--- PERIL > + |--- MFC(L) > + |--- G3D > + |--- TV > + |--- IMAGE > + |--- RIGHTBUS > + |--- PERIR > + |--- MFC(R) > + |--- CAM > + |--- FSYS > + |--- GPS > + |--- LCD0 > + |--- ISP > + > + - In case of Exynos5422, there are two power line as following:: > + VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) > + |--- DREX 1 > + > + VDD_INT |--- NoC_Core (parent device) > + |--- G2D > + |--- G3D > + |--- DISP1 > + |--- NoC_WCORE > + |--- GSCL > + |--- MSCL > + |--- ISP > + |--- MFC > + |--- GEN > + |--- PERIS > + |--- PERIC > + |--- FSYS > + |--- FSYS2 > + > + - In case of Exynos5433, there is VDD_INT power line as following:: > + VDD_INT |--- G2D (parent device) > + |--- MSCL > + |--- GSCL > + |--- JPEG > + |--- MFC > + |--- HEVC > + |--- BUS0 > + |--- BUS1 > + |--- BUS2 > + |--- PERIS (Fixed clock rate) > + |--- PERIC (Fixed clock rate) > + |--- FSYS (Fixed clock rate) > + > +properties: > + compatible: > + enum: > + - samsung,exynos-bus > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: bus > + > + devfreq: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + Parent bus device. Valid and required only for the passive bus devices. > + > + devfreq-events: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + minItems: 1 > + maxItems: 4 > + description: > + Devfreq-event device to monitor the current utilization of buses. Valid > + and required only for the parent bus devices. > + > + exynos,saturation-ratio: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Percentage value which is used to calibrate the performance count against > + total cycle count. Valid only for the parent bus devices. > + > + '#interconnect-cells': > + const: 0 > + > + interconnects: > + minItems: 1 > + maxItems: 2 > + > + operating-points-v2: true > + > + samsung,data-clock-ratio: > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 8 > + description: > + Ratio of the data throughput in B/s to minimum data clock frequency in > + Hz. > + > + vdd-supply: > + description: > + Main bus power rail. Valid and required only for the parent bus devices. > + > +required: > + - compatible > + - clocks > + - clock-names > + - operating-points-v2 > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/exynos3250.h> > + > + bus-dmc { > + compatible = "samsung,exynos-bus"; > + clocks = <&cmu_dmc CLK_DIV_DMC>; > + clock-names = "bus"; > + operating-points-v2 = <&bus_dmc_opp_table>; > + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; > + vdd-supply = <&buck1_reg>; > + }; > + > + ppmu_dmc0: ppmu@106a0000 { > + compatible = "samsung,exynos-ppmu"; > + reg = <0x106a0000 0x2000>; > + events { > + ppmu_dmc0_3: ppmu-event3-dmc0 { > + event-name = "ppmu-event3-dmc0"; > + }; > + }; > + }; > + > + bus_leftbus: bus-leftbus { > + compatible = "samsung,exynos-bus"; > + clocks = <&cmu CLK_DIV_GDL>; > + clock-names = "bus"; > + operating-points-v2 = <&bus_leftbus_opp_table>; > + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; > + vdd-supply = <&buck3_reg>; > + }; > + > + bus-rightbus { > + compatible = "samsung,exynos-bus"; > + clocks = <&cmu CLK_DIV_GDR>; > + clock-names = "bus"; > + operating-points-v2 = <&bus_leftbus_opp_table>; > + devfreq = <&bus_leftbus>; > + }; > + > + - | > + dmc: bus-dmc { > + compatible = "samsung,exynos-bus"; > + clocks = <&clock CLK_DIV_DMC>; > + clock-names = "bus"; > + operating-points-v2 = <&bus_dmc_opp_table>; > + samsung,data-clock-ratio = <4>; > + #interconnect-cells = <0>; > + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; > + vdd-supply = <&buck1_reg>; > + }; > + > + leftbus: bus-leftbus { > + compatible = "samsung,exynos-bus"; > + clocks = <&clock CLK_DIV_GDL>; > + clock-names = "bus"; > + operating-points-v2 = <&bus_leftbus_opp_table>; > + interconnects = <&dmc>; > + #interconnect-cells = <0>; > + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; > + vdd-supply = <&buck3_reg>; > + }; > + > + display: bus-display { > + compatible = "samsung,exynos-bus"; > + clocks = <&clock CLK_DIV_ACLK_266>; > + clock-names = "bus"; > + operating-points-v2 = <&bus_display_opp_table>; > + interconnects = <&leftbus &dmc>; > + #interconnect-cells = <0>; > + devfreq = <&leftbus>; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 7c9187635801..19875f60ebb1 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -4328,7 +4328,7 @@ L: linux-pm@vger.kernel.org > L: linux-samsung-soc@vger.kernel.org > S: Maintained > T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git > -F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt > +F: Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml > F: drivers/devfreq/exynos-bus.c > > BUSLOGIC SCSI DRIVER Applied it.
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt deleted file mode 100644 index bcaa2c08ac11..000000000000 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ /dev/null @@ -1,488 +0,0 @@ -* Generic Exynos Bus frequency device - -The Samsung Exynos SoC has many buses for data transfer between DRAM -and sub-blocks in SoC. Most Exynos SoCs share the common architecture -for buses. Generally, each bus of Exynos SoC includes a source clock -and a power line, which are able to change the clock frequency -of the bus in runtime. To monitor the usage of each bus in runtime, -the driver uses the PPMU (Platform Performance Monitoring Unit), which -is able to measure the current load of sub-blocks. - -The Exynos SoC includes the various sub-blocks which have the each AXI bus. -The each AXI bus has the owned source clock but, has not the only owned -power line. The power line might be shared among one more sub-blocks. -So, we can divide into two type of device as the role of each sub-block. -There are two type of bus devices as following: -- parent bus device -- passive bus device - -Basically, parent and passive bus device share the same power line. -The parent bus device can only change the voltage of shared power line -and the rest bus devices (passive bus device) depend on the decision of -the parent bus device. If there are three blocks which share the VDD_xxx -power line, Only one block should be parent device and then the rest blocks -should depend on the parent device as passive device. - - VDD_xxx |--- A block (parent) - |--- B block (passive) - |--- C block (passive) - -There are a little different composition among Exynos SoC because each Exynos -SoC has different sub-blocks. Therefore, such difference should be specified -in devicetree file instead of each device driver. In result, this driver -is able to support the bus frequency for all Exynos SoCs. - -Required properties for all bus devices: -- compatible: Should be "samsung,exynos-bus". -- clock-names : the name of clock used by the bus, "bus". -- clocks : phandles for clock specified in "clock-names" property. -- operating-points-v2: the OPP table including frequency/voltage information - to support DVFS (Dynamic Voltage/Frequency Scaling) feature. - -Required properties only for parent bus device: -- vdd-supply: the regulator to provide the buses with the voltage. -- devfreq-events: the devfreq-event device to monitor the current utilization - of buses. - -Required properties only for passive bus device: -- devfreq: the parent bus device. - -Optional properties only for parent bus device: -- exynos,saturation-ratio: the percentage value which is used to calibrate - the performance count against total cycle count. - -Optional properties for the interconnect functionality (QoS frequency -constraints): -- #interconnect-cells: should be 0. -- interconnects: as documented in ../interconnect.txt, describes a path at the - higher level interconnects used by this interconnect provider. - If this interconnect provider is directly linked to a top level interconnect - provider the property contains only one phandle. The provider extends - the interconnect graph by linking its node to a node registered by provider - pointed to by first phandle in the 'interconnects' property. - -- samsung,data-clock-ratio: ratio of the data throughput in B/s to minimum data - clock frequency in Hz, default value is 8 when this property is missing. - -Detailed correlation between sub-blocks and power line according to Exynos SoC: -- In case of Exynos3250, there are two power line as following: - VDD_MIF |--- DMC - - VDD_INT |--- LEFTBUS (parent device) - |--- PERIL - |--- MFC - |--- G3D - |--- RIGHTBUS - |--- PERIR - |--- FSYS - |--- LCD0 - |--- PERIR - |--- ISP - |--- CAM - -- In case of Exynos4210, there is one power line as following: - VDD_INT |--- DMC (parent device) - |--- LEFTBUS - |--- PERIL - |--- MFC(L) - |--- G3D - |--- TV - |--- LCD0 - |--- RIGHTBUS - |--- PERIR - |--- MFC(R) - |--- CAM - |--- FSYS - |--- GPS - |--- LCD0 - |--- LCD1 - -- In case of Exynos4x12, there are two power line as following: - VDD_MIF |--- DMC - - VDD_INT |--- LEFTBUS (parent device) - |--- PERIL - |--- MFC(L) - |--- G3D - |--- TV - |--- IMAGE - |--- RIGHTBUS - |--- PERIR - |--- MFC(R) - |--- CAM - |--- FSYS - |--- GPS - |--- LCD0 - |--- ISP - -- In case of Exynos5422, there are two power line as following: - VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) - |--- DREX 1 - - VDD_INT |--- NoC_Core (parent device) - |--- G2D - |--- G3D - |--- DISP1 - |--- NoC_WCORE - |--- GSCL - |--- MSCL - |--- ISP - |--- MFC - |--- GEN - |--- PERIS - |--- PERIC - |--- FSYS - |--- FSYS2 - -- In case of Exynos5433, there is VDD_INT power line as following: - VDD_INT |--- G2D (parent device) - |--- MSCL - |--- GSCL - |--- JPEG - |--- MFC - |--- HEVC - |--- BUS0 - |--- BUS1 - |--- BUS2 - |--- PERIS (Fixed clock rate) - |--- PERIC (Fixed clock rate) - |--- FSYS (Fixed clock rate) - -Example 1: - Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to - power line (regulator). The MIF (Memory Interface) AXI bus is used to - transfer data between DRAM and CPU and uses the VDD_MIF regulator. - - - MIF (Memory Interface) block - : VDD_MIF |--- DMC (Dynamic Memory Controller) - - - INT (Internal) block - : VDD_INT |--- LEFTBUS (parent device) - |--- PERIL - |--- MFC - |--- G3D - |--- RIGHTBUS - |--- FSYS - |--- LCD0 - |--- PERIR - |--- ISP - |--- CAM - - - MIF bus's frequency/voltage table - ----------------------- - |Lv| Freq | Voltage | - ----------------------- - |L1| 50000 |800000 | - |L2| 100000 |800000 | - |L3| 134000 |800000 | - |L4| 200000 |825000 | - |L5| 400000 |875000 | - ----------------------- - - - INT bus's frequency/voltage table - ---------------------------------------------------------- - |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | - | name| |LCD0 | | | || | - | | |FSYS | | | || | - | | |MFC | | | || | - ---------------------------------------------------------- - |Mode |*parent|passive |passive|passive|passive|| | - ---------------------------------------------------------- - |Lv |Frequency ||Voltage | - ---------------------------------------------------------- - |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | - |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | - |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | - |L4 |134000 |134000 |200000 |200000 | ||1000000 | - |L5 |200000 |200000 |400000 |300000 | ||1000000 | - ---------------------------------------------------------- - -Example 2: - The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi - is listed below: - - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&cmu_dmc CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - opp-microvolt = <800000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <800000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <800000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <825000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <875000>; - }; - }; - - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_rightbus: bus_rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_lcd0: bus_lcd0 { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_160>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_200>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_mcuisp: bus_mcuisp { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>; - clock-names = "bus"; - operating-points-v2 = <&bus_mcuisp_opp_table>; - status = "disabled"; - }; - - bus_isp: bus_isp { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_266>; - clock-names = "bus"; - operating-points-v2 = <&bus_isp_opp_table>; - status = "disabled"; - }; - - bus_peril: bus_peril { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peril_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_leftbus_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - opp-microvolt = <900000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - opp-microvolt = <900000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <1000000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <1000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1000000>; - }; - }; - - bus_mcuisp_opp_table: opp_table2 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - }; - }; - - bus_isp_opp_table: opp_table3 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - }; - }; - - bus_peril_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - }; - - - Usage case to handle the frequency and voltage of bus on runtime - in exynos3250-rinato.dts is listed below: - - &bus_dmc { - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; - vdd-supply = <&buck1_reg>; /* VDD_MIF */ - status = "okay"; - }; - - &bus_leftbus { - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; - vdd-supply = <&buck3_reg>; - status = "okay"; - }; - - &bus_rightbus { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_lcd0 { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_fsys { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_mcuisp { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_isp { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_peril { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_mfc { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - -Example 3: - An interconnect path "bus_display -- bus_leftbus -- bus_dmc" on - Exynos4412 SoC with video mixer as an interconnect consumer device. - - soc { - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - samsung,data-clock-ratio = <4>; - #interconnect-cells = <0>; - }; - - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - #interconnect-cells = <0>; - interconnects = <&bus_dmc>; - }; - - bus_display: bus_display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - #interconnect-cells = <0>; - interconnects = <&bus_leftbus &bus_dmc>; - }; - - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - /* ... */ - } - - bus_leftbus_opp_table: opp_table3 { - compatible = "operating-points-v2"; - /* ... */ - }; - - bus_display_opp_table: opp_table4 { - compatible = "operating-points-v2"; - /* .. */ - }; - - &mixer { - compatible = "samsung,exynos4212-mixer"; - interconnects = <&bus_display &bus_dmc>; - /* ... */ - }; - }; diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml new file mode 100644 index 000000000000..ad9ed596dfef --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml @@ -0,0 +1,290 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Bus and Interconnect + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + The Samsung Exynos SoC has many buses for data transfer between DRAM and + sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses. + Generally, each bus of Exynos SoC includes a source clock and a power line, + which are able to change the clock frequency of the bus in runtime. To + monitor the usage of each bus in runtime, the driver uses the PPMU (Platform + Performance Monitoring Unit), which is able to measure the current load of + sub-blocks. + + The Exynos SoC includes the various sub-blocks which have the each AXI bus. + The each AXI bus has the owned source clock but, has not the only owned power + line. The power line might be shared among one more sub-blocks. So, we can + divide into two type of device as the role of each sub-block. There are two + type of bus devices as following:: + - parent bus device + - passive bus device + + Basically, parent and passive bus device share the same power line. The + parent bus device can only change the voltage of shared power line and the + rest bus devices (passive bus device) depend on the decision of the parent + bus device. If there are three blocks which share the VDD_xxx power line, + Only one block should be parent device and then the rest blocks should depend + on the parent device as passive device. + + VDD_xxx |--- A block (parent) + |--- B block (passive) + |--- C block (passive) + + There are a little different composition among Exynos SoC because each Exynos + SoC has different sub-blocks. Therefore, such difference should be specified + in devicetree file instead of each device driver. In result, this driver is + able to support the bus frequency for all Exynos SoCs. + + Detailed correlation between sub-blocks and power line according + to Exynos SoC:: + - In case of Exynos3250, there are two power line as following:: + VDD_MIF |--- DMC (Dynamic Memory Controller) + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC + |--- G3D + |--- RIGHTBUS + |--- PERIR + |--- FSYS + |--- LCD0 + |--- PERIR + |--- ISP + |--- CAM + + - MIF bus's frequency/voltage table + ----------------------- + |Lv| Freq | Voltage | + ----------------------- + |L1| 50000 |800000 | + |L2| 100000 |800000 | + |L3| 134000 |800000 | + |L4| 200000 |825000 | + |L5| 400000 |875000 | + ----------------------- + + - INT bus's frequency/voltage table + ---------------------------------------------------------- + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | + | name| |LCD0 | | | || | + | | |FSYS | | | || | + | | |MFC | | | || | + ---------------------------------------------------------- + |Mode |*parent|passive |passive|passive|passive|| | + ---------------------------------------------------------- + |Lv |Frequency ||Voltage | + ---------------------------------------------------------- + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | + |L4 |134000 |134000 |200000 |200000 | ||1000000 | + |L5 |200000 |200000 |400000 |300000 | ||1000000 | + ---------------------------------------------------------- + + - In case of Exynos4210, there is one power line as following:: + VDD_INT |--- DMC (parent device, Dynamic Memory Controller) + |--- LEFTBUS + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- LCD0 + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- LCD1 + + - In case of Exynos4x12, there are two power line as following:: + VDD_MIF |--- DMC (Dynamic Memory Controller) + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- IMAGE + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- ISP + + - In case of Exynos5422, there are two power line as following:: + VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) + |--- DREX 1 + + VDD_INT |--- NoC_Core (parent device) + |--- G2D + |--- G3D + |--- DISP1 + |--- NoC_WCORE + |--- GSCL + |--- MSCL + |--- ISP + |--- MFC + |--- GEN + |--- PERIS + |--- PERIC + |--- FSYS + |--- FSYS2 + + - In case of Exynos5433, there is VDD_INT power line as following:: + VDD_INT |--- G2D (parent device) + |--- MSCL + |--- GSCL + |--- JPEG + |--- MFC + |--- HEVC + |--- BUS0 + |--- BUS1 + |--- BUS2 + |--- PERIS (Fixed clock rate) + |--- PERIC (Fixed clock rate) + |--- FSYS (Fixed clock rate) + +properties: + compatible: + enum: + - samsung,exynos-bus + + clocks: + maxItems: 1 + + clock-names: + items: + - const: bus + + devfreq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Parent bus device. Valid and required only for the passive bus devices. + + devfreq-events: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: + Devfreq-event device to monitor the current utilization of buses. Valid + and required only for the parent bus devices. + + exynos,saturation-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Percentage value which is used to calibrate the performance count against + total cycle count. Valid only for the parent bus devices. + + '#interconnect-cells': + const: 0 + + interconnects: + minItems: 1 + maxItems: 2 + + operating-points-v2: true + + samsung,data-clock-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + description: + Ratio of the data throughput in B/s to minimum data clock frequency in + Hz. + + vdd-supply: + description: + Main bus power rail. Valid and required only for the parent bus devices. + +required: + - compatible + - clocks + - clock-names + - operating-points-v2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos3250.h> + + bus-dmc { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_dmc CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + }; + + ppmu_dmc0: ppmu@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; + }; + + bus_leftbus: bus-leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + }; + + bus-rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + devfreq = <&bus_leftbus>; + }; + + - | + dmc: bus-dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + samsung,data-clock-ratio = <4>; + #interconnect-cells = <0>; + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + }; + + leftbus: bus-leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + interconnects = <&dmc>; + #interconnect-cells = <0>; + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + }; + + display: bus-display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACLK_266>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + interconnects = <&leftbus &dmc>; + #interconnect-cells = <0>; + devfreq = <&leftbus>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 7c9187635801..19875f60ebb1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4328,7 +4328,7 @@ L: linux-pm@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git -F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt +F: Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml F: drivers/devfreq/exynos-bus.c BUSLOGIC SCSI DRIVER
Convert the Samsung Exynos SoC Bus and Interconnect bindings to DT schema. Vast parts of descritpion and example were copied, so keep license as GPL-2.0-only. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../bindings/devfreq/exynos-bus.txt | 488 ------------------ .../interconnect/samsung,exynos-bus.yaml | 290 +++++++++++ MAINTAINERS | 2 +- 3 files changed, 291 insertions(+), 489 deletions(-) delete mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt create mode 100644 Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml