| Message ID | 20220629143046.213584-8-aidanmacdonald.0x0@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for AXP192 PMIC | expand |
On Wed, Jun 29, 2022 at 4:29 PM Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote: > > Add support for the AXP192 PMIC. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Acked-by: Mark Brown <broonie@kernel.org> > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > --- > drivers/regulator/axp20x-regulator.c | 100 ++++++++++++++++++++++++--- > 1 file changed, 91 insertions(+), 9 deletions(-) > > diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c > index d260c442b788..ee79a9ed0249 100644 > --- a/drivers/regulator/axp20x-regulator.c > +++ b/drivers/regulator/axp20x-regulator.c > @@ -27,6 +27,29 @@ > #include <linux/regulator/machine.h> > #include <linux/regulator/of_regulator.h> > > +#define AXP192_GPIO0_FUNC_MASK GENMASK(2, 0) > + > +#define AXP192_IO_ENABLED 0x02 > +#define AXP192_IO_DISABLED 0x06 > + > +#define AXP192_WORKMODE_DCDC1_MASK BIT_MASK(3) > +#define AXP192_WORKMODE_DCDC2_MASK BIT_MASK(2) > +#define AXP192_WORKMODE_DCDC3_MASK BIT_MASK(1) > + > +#define AXP192_DCDC1_V_OUT_MASK GENMASK(6, 0) > +#define AXP192_DCDC2_V_OUT_MASK GENMASK(5, 0) > +#define AXP192_DCDC3_V_OUT_MASK GENMASK(6, 0) > +#define AXP192_LDO2_V_OUT_MASK GENMASK(7, 4) > +#define AXP192_LDO3_V_OUT_MASK GENMASK(3, 0) > +#define AXP192_LDO_IO0_V_OUT_MASK GENMASK(7, 4) > + > +#define AXP192_PWR_OUT_EXTEN_MASK BIT_MASK(6) > +#define AXP192_PWR_OUT_DCDC2_MASK BIT_MASK(4) > +#define AXP192_PWR_OUT_LDO3_MASK BIT_MASK(3) > +#define AXP192_PWR_OUT_LDO2_MASK BIT_MASK(2) > +#define AXP192_PWR_OUT_DCDC3_MASK BIT_MASK(1) > +#define AXP192_PWR_OUT_DCDC1_MASK BIT_MASK(0) > + > #define AXP20X_GPIO0_FUNC_MASK GENMASK(3, 0) > #define AXP20X_GPIO1_FUNC_MASK GENMASK(3, 0) > > @@ -375,25 +398,32 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp) > > switch (axp20x->variant) { > case AXP209_ID: > - if (id == AXP20X_DCDC2) { > + if (id == AXP20X_LDO3) { > slew_rates = axp209_dcdc2_ldo3_slew_rates; > rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates); > reg = AXP20X_DCDC2_LDO3_V_RAMP; > - mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK | > - AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK; > + mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK | > + AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK; > enable = (ramp > 0) ? > - AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0; > + AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0; > break; > } > > - if (id == AXP20X_LDO3) { > + fallthrough; > + > + case AXP192_ID: > + /* > + * AXP192 and AXP209 share the same DCDC2 ramp configuration > + */ > + if ((axp20x->variant == AXP209_ID && id == AXP20X_DCDC2) || > + (axp20x->variant == AXP192_ID && id == AXP192_DCDC2)) { > slew_rates = axp209_dcdc2_ldo3_slew_rates; > rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates); > reg = AXP20X_DCDC2_LDO3_V_RAMP; > - mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK | > - AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK; > + mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK | > + AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK; > enable = (ramp > 0) ? > - AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0; > + AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0; > break; > } > > @@ -415,7 +445,8 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp) > if (ramp > slew_rates[i]) > break; > > - if (id == AXP20X_DCDC2) > + if ((axp20x->variant == AXP209_ID && id == AXP20X_DCDC2) || > + (axp20x->variant == AXP192_ID && id == AXP192_DCDC2)) > cfg = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE(i); > else > cfg = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE(i); > @@ -511,6 +542,29 @@ static const struct regulator_ops axp20x_ops_sw = { > .is_enabled = regulator_is_enabled_regmap, > }; > > +static const struct regulator_desc axp192_regulators[] = { > + AXP_DESC(AXP192, DCDC1, "dcdc1", "vin1", 700, 3500, 25, > + AXP192_DCDC1_V_OUT, AXP192_DCDC1_V_OUT_MASK, > + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC1_MASK), > + AXP_DESC(AXP192, DCDC2, "dcdc2", "vin2", 700, 2275, 25, > + AXP192_DCDC2_V_OUT, AXP192_DCDC2_V_OUT_MASK, > + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC2_MASK), > + AXP_DESC(AXP192, DCDC3, "dcdc3", "vin3", 700, 3500, 25, > + AXP192_DCDC3_V_OUT, AXP192_DCDC3_V_OUT_MASK, > + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC3_MASK), > + AXP_DESC_FIXED(AXP192, LDO1, "ldo1", "acin", 1250), > + AXP_DESC(AXP192, LDO2, "ldo2", "ldoin", 1800, 3300, 100, > + AXP192_LDO2_3_V_OUT, AXP192_LDO2_V_OUT_MASK, > + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_LDO2_MASK), > + AXP_DESC(AXP192, LDO3, "ldo3", "ldoin", 1800, 3300, 100, > + AXP192_LDO2_3_V_OUT, AXP192_LDO3_V_OUT_MASK, > + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_LDO3_MASK), > + AXP_DESC_IO(AXP192, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100, > + AXP192_LDO_IO0_V_OUT, AXP192_LDO_IO0_V_OUT_MASK, > + AXP192_GPIO0_CTRL, AXP192_GPIO0_FUNC_MASK, > + AXP192_IO_ENABLED, AXP192_IO_DISABLED), > +}; > + > static const struct linear_range axp20x_ldo4_ranges[] = { > REGULATOR_LINEAR_RANGE(1250000, > AXP20X_LDO4_V_OUT_1250mV_START, > @@ -1008,6 +1062,12 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) > u32 min, max, def, step; > > switch (axp20x->variant) { > + case AXP192_ID: > + min = 900; > + max = 2025; > + def = 1500; > + step = 75; > + break; > case AXP202_ID: > case AXP209_ID: > min = 750; > @@ -1100,6 +1160,24 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work > unsigned int mask; > > switch (axp20x->variant) { > + case AXP192_ID: > + switch (id) { > + case AXP192_DCDC1: > + mask = AXP192_WORKMODE_DCDC1_MASK; > + break; > + case AXP192_DCDC2: > + mask = AXP192_WORKMODE_DCDC2_MASK; > + break; > + case AXP192_DCDC3: > + mask = AXP192_WORKMODE_DCDC3_MASK; > + break; > + default: > + return -EINVAL; > + } > + > + workmode <<= ffs(mask) - 1; > + break; > + > case AXP202_ID: > case AXP209_ID: > if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) > @@ -1220,6 +1298,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev) > bool drivevbus = false; > > switch (axp20x->variant) { > + case AXP192_ID: > + regulators = axp192_regulators; > + nregulators = AXP192_REG_ID_MAX; > + break; > case AXP202_ID: > case AXP209_ID: > regulators = axp20x_regulators; > -- > 2.35.1 >
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index d260c442b788..ee79a9ed0249 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -27,6 +27,29 @@ #include <linux/regulator/machine.h> #include <linux/regulator/of_regulator.h> +#define AXP192_GPIO0_FUNC_MASK GENMASK(2, 0) + +#define AXP192_IO_ENABLED 0x02 +#define AXP192_IO_DISABLED 0x06 + +#define AXP192_WORKMODE_DCDC1_MASK BIT_MASK(3) +#define AXP192_WORKMODE_DCDC2_MASK BIT_MASK(2) +#define AXP192_WORKMODE_DCDC3_MASK BIT_MASK(1) + +#define AXP192_DCDC1_V_OUT_MASK GENMASK(6, 0) +#define AXP192_DCDC2_V_OUT_MASK GENMASK(5, 0) +#define AXP192_DCDC3_V_OUT_MASK GENMASK(6, 0) +#define AXP192_LDO2_V_OUT_MASK GENMASK(7, 4) +#define AXP192_LDO3_V_OUT_MASK GENMASK(3, 0) +#define AXP192_LDO_IO0_V_OUT_MASK GENMASK(7, 4) + +#define AXP192_PWR_OUT_EXTEN_MASK BIT_MASK(6) +#define AXP192_PWR_OUT_DCDC2_MASK BIT_MASK(4) +#define AXP192_PWR_OUT_LDO3_MASK BIT_MASK(3) +#define AXP192_PWR_OUT_LDO2_MASK BIT_MASK(2) +#define AXP192_PWR_OUT_DCDC3_MASK BIT_MASK(1) +#define AXP192_PWR_OUT_DCDC1_MASK BIT_MASK(0) + #define AXP20X_GPIO0_FUNC_MASK GENMASK(3, 0) #define AXP20X_GPIO1_FUNC_MASK GENMASK(3, 0) @@ -375,25 +398,32 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp) switch (axp20x->variant) { case AXP209_ID: - if (id == AXP20X_DCDC2) { + if (id == AXP20X_LDO3) { slew_rates = axp209_dcdc2_ldo3_slew_rates; rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates); reg = AXP20X_DCDC2_LDO3_V_RAMP; - mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK | - AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK; + mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK | + AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK; enable = (ramp > 0) ? - AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0; + AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0; break; } - if (id == AXP20X_LDO3) { + fallthrough; + + case AXP192_ID: + /* + * AXP192 and AXP209 share the same DCDC2 ramp configuration + */ + if ((axp20x->variant == AXP209_ID && id == AXP20X_DCDC2) || + (axp20x->variant == AXP192_ID && id == AXP192_DCDC2)) { slew_rates = axp209_dcdc2_ldo3_slew_rates; rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates); reg = AXP20X_DCDC2_LDO3_V_RAMP; - mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK | - AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK; + mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK | + AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK; enable = (ramp > 0) ? - AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0; + AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0; break; } @@ -415,7 +445,8 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp) if (ramp > slew_rates[i]) break; - if (id == AXP20X_DCDC2) + if ((axp20x->variant == AXP209_ID && id == AXP20X_DCDC2) || + (axp20x->variant == AXP192_ID && id == AXP192_DCDC2)) cfg = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE(i); else cfg = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE(i); @@ -511,6 +542,29 @@ static const struct regulator_ops axp20x_ops_sw = { .is_enabled = regulator_is_enabled_regmap, }; +static const struct regulator_desc axp192_regulators[] = { + AXP_DESC(AXP192, DCDC1, "dcdc1", "vin1", 700, 3500, 25, + AXP192_DCDC1_V_OUT, AXP192_DCDC1_V_OUT_MASK, + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC1_MASK), + AXP_DESC(AXP192, DCDC2, "dcdc2", "vin2", 700, 2275, 25, + AXP192_DCDC2_V_OUT, AXP192_DCDC2_V_OUT_MASK, + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC2_MASK), + AXP_DESC(AXP192, DCDC3, "dcdc3", "vin3", 700, 3500, 25, + AXP192_DCDC3_V_OUT, AXP192_DCDC3_V_OUT_MASK, + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_DCDC3_MASK), + AXP_DESC_FIXED(AXP192, LDO1, "ldo1", "acin", 1250), + AXP_DESC(AXP192, LDO2, "ldo2", "ldoin", 1800, 3300, 100, + AXP192_LDO2_3_V_OUT, AXP192_LDO2_V_OUT_MASK, + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_LDO2_MASK), + AXP_DESC(AXP192, LDO3, "ldo3", "ldoin", 1800, 3300, 100, + AXP192_LDO2_3_V_OUT, AXP192_LDO3_V_OUT_MASK, + AXP192_PWR_OUT_CTRL, AXP192_PWR_OUT_LDO3_MASK), + AXP_DESC_IO(AXP192, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100, + AXP192_LDO_IO0_V_OUT, AXP192_LDO_IO0_V_OUT_MASK, + AXP192_GPIO0_CTRL, AXP192_GPIO0_FUNC_MASK, + AXP192_IO_ENABLED, AXP192_IO_DISABLED), +}; + static const struct linear_range axp20x_ldo4_ranges[] = { REGULATOR_LINEAR_RANGE(1250000, AXP20X_LDO4_V_OUT_1250mV_START, @@ -1008,6 +1062,12 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) u32 min, max, def, step; switch (axp20x->variant) { + case AXP192_ID: + min = 900; + max = 2025; + def = 1500; + step = 75; + break; case AXP202_ID: case AXP209_ID: min = 750; @@ -1100,6 +1160,24 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work unsigned int mask; switch (axp20x->variant) { + case AXP192_ID: + switch (id) { + case AXP192_DCDC1: + mask = AXP192_WORKMODE_DCDC1_MASK; + break; + case AXP192_DCDC2: + mask = AXP192_WORKMODE_DCDC2_MASK; + break; + case AXP192_DCDC3: + mask = AXP192_WORKMODE_DCDC3_MASK; + break; + default: + return -EINVAL; + } + + workmode <<= ffs(mask) - 1; + break; + case AXP202_ID: case AXP209_ID: if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) @@ -1220,6 +1298,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev) bool drivevbus = false; switch (axp20x->variant) { + case AXP192_ID: + regulators = axp192_regulators; + nregulators = AXP192_REG_ID_MAX; + break; case AXP202_ID: case AXP209_ID: regulators = axp20x_regulators;