diff mbox series

[v4,12/13] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support

Message ID 20220704053901.728-13-peterwu.pub@gmail.com
State Superseded
Headers show
Series Add Mediatek MT6370 PMIC support | expand

Commit Message

ChiaEn Wu July 4, 2022, 5:39 a.m. UTC
From: Alice Chen <alice_chen@richtek.com>

Add Mediatek MT6370 flashlight support.

Signed-off-by: Alice Chen <alice_chen@richtek.com>
---

v4:
- Replace text "Mediatek" with "MediaTek" in Kconfig
- Add Copyright in the source code
---
 drivers/leds/flash/Kconfig             |  12 +
 drivers/leds/flash/Makefile            |   1 +
 drivers/leds/flash/leds-mt6370-flash.c | 662 +++++++++++++++++++++++++++++++++
 3 files changed, 675 insertions(+)
 create mode 100644 drivers/leds/flash/leds-mt6370-flash.c

Comments

Alice Chen July 7, 2022, 10:49 a.m. UTC | #1
Hi Andy,

Thank you for the valuable comment.

Andy Shevchenko <andy.shevchenko@gmail.com> 於 2022年7月5日 週二 清晨5:06寫道:
>
> On Mon, Jul 4, 2022 at 7:43 AM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
>
> > Add Mediatek MT6370 flashlight support.
>
> ...
>
> > +         This driver can also be built as a module. If so the module
>
> If so,
>
Thank you, I'll fix it in the next version.

> > +         will be called "leds-mt6370-flash.ko".
>
> No ".ko" part.
>
Thank you, I'll fix it in the next version.

> ...
>
> > +#define MT6370_ITORCH_MINUA            25000
> > +#define MT6370_ITORCH_STEPUA           12500
> > +#define MT6370_ITORCH_MAXUA            400000
> > +#define MT6370_ITORCH_DOUBLE_MAXUA     800000
> > +#define MT6370_ISTRB_MINUA             50000
> > +#define MT6370_ISTRB_STEPUA            12500
> > +#define MT6370_ISTRB_MAXUA             1500000
> > +#define MT6370_ISTRB_DOUBLE_MAXUA      3000000
> > +#define MT6370_STRBTO_MINUS            64000
> > +#define MT6370_STRBTO_STEPUS           32000
> > +#define MT6370_STRBTO_MAXUS            2432000
>
> Make units suffix visible, i.e. _US, _uA, etc.
>
Thank you, I'll fix it in the next version.

> ...
>
> > +       if (curr)
> > +               val |= MT6370_TORCHEN_MASK;
> > +
> > +
>
> One blank line is enough.
>
Thank you, I'll fix it in the next version.

> ...
>
> > +       /*
> > +        * Due to the current spike when turning on flash,
> > +        * let brightness to be kept by framework.
>
> brightness be
> the framework
>
Thank you, I'll fix it in the next version.

> > +        * This empty function is used to
> > +        * prevent led_classdev_flash register ops check failure.
> > +        */
>
Thank you, I'll fix it in the next version.
> ...
>
> > +       } else {
> > +               ret = regmap_update_bits(priv->regmap,
> > +                                        MT6370_REG_FLEDISTRB(led->led_no),
> > +                                        MT6370_ISTROBE_MASK, val);
>
> > +               if (ret)
> > +                       return ret;
>
> Dup of the below.
>
Thank you, I'll fix it in the next version.

> > +       }
> > +       return ret;
>
> ...
>
> > +       /*
> > +        * If the flash need to be on,
> > +        * config the flash current ramping up to the setting value
> > +        * Else, always recover back to the minimum one
>
> Missed periods.
>
Thank you, I'll fix it in the next version.

> > +        */
>
> ...
>
> > +       /*
> > +        * For the flash turn on/off, HW ramping up/down time is 5ms/500us
> > +        * respectively.
> > +        */
> > +       if (!prev && curr)
> > +               usleep_range(5000, 6000);
> > +       else if (prev && !curr)
> > +               udelay(500);
>
> Comment doesn't explain why this is suddenly a busy loop operation?
>
For the flash turn on/off, HW ramping up/down waiting time is
5ms/500us, respectively.
The busy loop is for preventing turn on/off in wait time, which will
cause unexpected problems.

If I change the comment to
"For the flash turn on/off, HW ramping up/down waiting time is
5ms/500us, respectively.
Need to wait until HW ramping successfully to prevent the unexpected problem.",
will this meet your expectation?

>
> > +static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
> > +                               struct led_init_data *init_data)
> > +{
> > +       struct v4l2_flash_config v4l2_config = {0};
> > +       int ret;
> > +
> > +       ret = devm_led_classdev_flash_register_ext(parent, &led->flash,
> > +                                                  init_data);
> > +       if (ret) {
> > +               dev_err(parent, "Couldn't register flash %d\n", led->led_no);
> > +               return ret;
> > +       }
> > +
> > +       mt6370_init_v4l2_flash_config(led, &v4l2_config);
> > +       led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode,
> > +                                         &led->flash, &v4l2_flash_ops,
> > +                                         &v4l2_config);
> > +       if (IS_ERR(led->v4l2_flash)) {
> > +               dev_err(parent, "Failed to register %d v4l2 sd\n", led->led_no);
> > +               return PTR_ERR(led->v4l2_flash);
> > +       }
> > +
> > +       return 0;
> > +}
>
> ...
>
> > +       } else
> > +               val = clamp_align(val, MT6370_STRBTO_MINUS, MT6370_STRBTO_MAXUS,
> > +                                 MT6370_STRBTO_STEPUS);
>
> Missed {}
>
Thank you, I'll fix it in the next version.

> > +
> > +
>
> One blank line is enough.
>
Thank you, I'll fix it in the next version.

> --

Yours Sincerely,
Alice
diff mbox series

Patch

diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index d3eb689..cd366e8 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -90,4 +90,16 @@  config LEDS_SGM3140
 	  This option enables support for the SGM3140 500mA Buck/Boost Charge
 	  Pump LED Driver.
 
+config LEDS_MT6370_FLASHLIGHT
+	tristate "Flash LED Support for MediaTek MT6370 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_MT6370
+	help
+	  Support 2 channels and torch/strobe mode.
+	  Say Y here to enable support for
+	  MT6370_FLASH_LED device.
+
+	  This driver can also be built as a module. If so the module
+	  will be called "leds-mt6370-flash.ko".
+
 endif # LEDS_CLASS_FLASH
diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
index 0acbddc..4c4c171 100644
--- a/drivers/leds/flash/Makefile
+++ b/drivers/leds/flash/Makefile
@@ -9,3 +9,4 @@  obj-$(CONFIG_LEDS_MAX77693)	+= leds-max77693.o
 obj-$(CONFIG_LEDS_RT4505)	+= leds-rt4505.o
 obj-$(CONFIG_LEDS_RT8515)	+= leds-rt8515.o
 obj-$(CONFIG_LEDS_SGM3140)	+= leds-sgm3140.o
+obj-$(CONFIG_LEDS_MT6370_FLASHLIGHT)	+= leds-mt6370-flash.o
diff --git a/drivers/leds/flash/leds-mt6370-flash.c b/drivers/leds/flash/leds-mt6370-flash.c
new file mode 100644
index 0000000..d988977
--- /dev/null
+++ b/drivers/leds/flash/leds-mt6370-flash.c
@@ -0,0 +1,662 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: Alice Chen <alice_chen@richtek.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <media/v4l2-flash-led-class.h>
+
+enum {
+	MT6370_LED_FLASH1,
+	MT6370_LED_FLASH2,
+	MT6370_MAX_LEDS
+};
+
+/* Virtual definition for multicolor */
+
+#define MT6370_REG_FLEDEN		0x17E
+#define MT6370_REG_STRBTO		0x173
+#define MT6370_REG_CHGSTAT2		0x1D1
+#define MT6370_REG_FLEDSTAT1		0x1D9
+#define	MT6370_REG_FLEDISTRB(_id)	(0x174 + 4 * _id)
+#define MT6370_REG_FLEDITOR(_id)	(0x175 + 4 * _id)
+#define MT6370_ITORCH_MASK		GENMASK(4, 0)
+#define MT6370_ISTROBE_MASK		GENMASK(6, 0)
+#define MT6370_STRBTO_MASK		GENMASK(6, 0)
+#define MT6370_TORCHEN_MASK		BIT(3)
+#define MT6370_STROBEN_MASK		BIT(2)
+#define MT6370_FLCSEN_MASK(_id)		BIT(MT6370_LED_FLASH2 - _id)
+#define MT6370_FLCSEN_MASK_ALL		(BIT(0) | BIT(1))
+#define MT6370_FLEDCHGVINOVP_MASK	BIT(3)
+#define MT6370_FLED1STRBTO_MASK		BIT(11)
+#define MT6370_FLED2STRBTO_MASK		BIT(10)
+#define MT6370_FLED1STRB_MASK		BIT(9)
+#define MT6370_FLED2STRB_MASK		BIT(8)
+#define MT6370_FLED1SHORT_MASK		BIT(7)
+#define MT6370_FLED2SHORT_MASK		BIT(6)
+#define MT6370_FLEDLVF_MASK		BIT(3)
+
+#define MT6370_LED_JOINT		2
+#define MT6370_RANGE_FLED_REG		4
+#define MT6370_ITORCH_MINUA		25000
+#define MT6370_ITORCH_STEPUA		12500
+#define MT6370_ITORCH_MAXUA		400000
+#define MT6370_ITORCH_DOUBLE_MAXUA	800000
+#define MT6370_ISTRB_MINUA		50000
+#define MT6370_ISTRB_STEPUA		12500
+#define MT6370_ISTRB_MAXUA		1500000
+#define MT6370_ISTRB_DOUBLE_MAXUA	3000000
+#define MT6370_STRBTO_MINUS		64000
+#define MT6370_STRBTO_STEPUS		32000
+#define MT6370_STRBTO_MAXUS		2432000
+
+#define STATE_OFF			0
+#define STATE_KEEP			1
+#define STATE_ON			2
+
+#define to_mt6370_led(ptr, member) container_of(ptr, struct mt6370_led, member)
+
+struct mt6370_led {
+	struct led_classdev_flash flash;
+	struct v4l2_flash *v4l2_flash;
+	struct mt6370_priv *priv;
+	u32 led_no;
+	u32 default_state;
+};
+
+struct mt6370_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	unsigned int fled_strobe_used;
+	unsigned int fled_torch_used;
+	unsigned int leds_active;
+	unsigned int leds_count;
+	struct mt6370_led leds[];
+};
+
+static int mt6370_torch_brightness_set(struct led_classdev *lcdev,
+				       enum led_brightness level)
+{
+	struct mt6370_led *led = to_mt6370_led(lcdev, flash.led_cdev);
+	struct mt6370_priv *priv = led->priv;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_TORCHEN_MASK | led_enable_mask;
+	u32 val = level ? led_enable_mask : 0;
+	u32 prev = priv->fled_torch_used, curr;
+	int ret, i;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid strobe is currently used.
+	 */
+	if (priv->fled_strobe_used) {
+		dev_warn(lcdev->dev, "Please disable strobe first [%d]\n",
+			 priv->fled_strobe_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (level)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_TORCHEN_MASK;
+
+
+	if (level) {
+		level -= 1;
+		if (led->led_no == MT6370_LED_JOINT) {
+			int flevel[MT6370_MAX_LEDS];
+
+			flevel[0] = level / 2;
+			flevel[1] = level - flevel[0];
+			for (i = 0; i < MT6370_MAX_LEDS; i++) {
+				ret = regmap_update_bits(priv->regmap,
+						MT6370_REG_FLEDITOR(i),
+						MT6370_ITORCH_MASK, flevel[i]);
+				if (ret)
+					goto unlock;
+			}
+		} else {
+			ret = regmap_update_bits(priv->regmap,
+					MT6370_REG_FLEDITOR(led->led_no),
+					MT6370_ITORCH_MASK, level);
+			if (ret)
+				goto unlock;
+		}
+	}
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN,
+				 enable_mask, val);
+	if (ret)
+		goto unlock;
+
+	priv->fled_torch_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+				       u32 brightness)
+{
+	/*
+	 * Due to the current spike when turning on flash,
+	 * let brightness to be kept by framework.
+	 * This empty function is used to
+	 * prevent led_classdev_flash register ops check failure.
+	 */
+	return 0;
+}
+
+static int _mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+					u32 brightness)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 val = (brightness - s->min) / s->step;
+	int ret, i;
+
+	if (led->led_no == MT6370_LED_JOINT) {
+		int flevel[MT6370_MAX_LEDS];
+
+		flevel[0] = val / 2;
+		flevel[1] = val - flevel[0];
+		for (i = 0; i < MT6370_MAX_LEDS; i++) {
+			ret = regmap_update_bits(priv->regmap,
+						MT6370_REG_FLEDISTRB(i),
+						MT6370_ISTROBE_MASK, flevel[i]);
+			if (ret)
+				return ret;
+		}
+	} else {
+		ret = regmap_update_bits(priv->regmap,
+					 MT6370_REG_FLEDISTRB(led->led_no),
+					 MT6370_ISTROBE_MASK, val);
+		if (ret)
+			return ret;
+	}
+	return ret;
+}
+
+static int mt6370_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_classdev *lcdev = &fl_cdev->led_cdev;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_STROBEN_MASK | led_enable_mask;
+	u32 val = state ? led_enable_mask : 0;
+	u32 prev = priv->fled_strobe_used, curr;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid torch is currently used
+	 */
+	if (priv->fled_torch_used) {
+		dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n",
+				      priv->fled_torch_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (state)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_STROBEN_MASK;
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, enable_mask,
+				 val);
+	if (ret) {
+		dev_err(lcdev->dev, "[%d] control current source %d fail\n",
+				     led->led_no, state);
+		goto unlock;
+	}
+
+	/*
+	 * If the flash need to be on,
+	 * config the flash current ramping up to the setting value
+	 * Else, always recover back to the minimum one
+	 */
+	ret = _mt6370_flash_brightness_set(fl_cdev, state ? s->val : s->min);
+	if (ret)
+		goto unlock;
+
+	/*
+	 * For the flash turn on/off, HW ramping up/down time is 5ms/500us
+	 * respectively.
+	 */
+	if (!prev && curr)
+		usleep_range(5000, 6000);
+	else if (prev && !curr)
+		udelay(500);
+
+	priv->fled_strobe_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+
+	mutex_lock(&priv->lock);
+	*state = !!(priv->fled_strobe_used & BIT(led->led_no));
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int mt6370_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->timeout;
+	u32 val = (timeout - s->min) / s->step;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_STRBTO,
+				 MT6370_STRBTO_MASK, val);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	u16 fled_stat;
+	unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
+	u32 rfault = 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_read(priv->regmap, MT6370_REG_CHGSTAT2, &chg_stat);
+	if (ret)
+		goto unlock;
+
+	ret = regmap_raw_read(priv->regmap, MT6370_REG_FLEDSTAT1, &fled_stat,
+			      sizeof(fled_stat));
+	if (ret)
+		goto unlock;
+
+	switch (led->led_no) {
+	case MT6370_LED_FLASH1:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK;
+		break;
+
+	case MT6370_LED_FLASH2:
+		strobe_timeout_mask = MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED2SHORT_MASK;
+		break;
+
+	case MT6370_LED_JOINT:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK |
+				      MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK |
+				  MT6370_FLED2SHORT_MASK;
+	}
+
+	if (chg_stat & MT6370_FLEDCHGVINOVP_MASK)
+		rfault |= LED_FAULT_INPUT_VOLTAGE;
+
+	if (fled_stat & strobe_timeout_mask)
+		rfault |= LED_FAULT_TIMEOUT;
+
+	if (fled_stat & fled_short_mask)
+		rfault |= LED_FAULT_SHORT_CIRCUIT;
+
+	if (fled_stat & MT6370_FLEDLVF_MASK)
+		rfault |= LED_FAULT_UNDER_VOLTAGE;
+
+	*fault = rfault;
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct led_flash_ops mt6370_flash_ops = {
+	.flash_brightness_set = mt6370_flash_brightness_set,
+	.strobe_set = mt6370_strobe_set,
+	.strobe_get = mt6370_strobe_get,
+	.timeout_set = mt6370_timeout_set,
+	.fault_get = mt6370_fault_get,
+};
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int mt6370_flash_external_strobe_set(struct v4l2_flash *v4l2_flash,
+					    bool enable)
+{
+	struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+	struct mt6370_led *led = to_mt6370_led(flash, flash);
+	struct mt6370_priv *priv = led->priv;
+	u32 mask = (led->led_no == MT6370_LED_JOINT) ? MT6370_FLCSEN_MASK_ALL :
+		   MT6370_FLCSEN_MASK(led->led_no);
+	u32 val = enable ? mask : 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, mask, val);
+	if (ret)
+		goto unlock;
+
+	if (enable)
+		priv->fled_strobe_used |= BIT(led->led_no);
+	else
+		priv->fled_strobe_used &= ~BIT(led->led_no);
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+	.external_strobe_set = mt6370_flash_external_strobe_set,
+};
+
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+	struct led_classdev *lcdev;
+	struct led_flash_setting *s = &config->intensity;
+
+	lcdev = &led->flash.led_cdev;
+
+	s->min = MT6370_ITORCH_MINUA;
+	s->step = MT6370_ITORCH_STEPUA;
+	s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
+
+	config->has_external_strobe = 1;
+	strscpy(config->dev_name, lcdev->dev->kobj.name,
+		sizeof(config->dev_name));
+
+	config->flash_faults = LED_FAULT_SHORT_CIRCUIT | LED_FAULT_TIMEOUT |
+			       LED_FAULT_INPUT_VOLTAGE |
+			       LED_FAULT_UNDER_VOLTAGE;
+}
+#else
+static const struct v4l2_flash_ops v4l2_flash_ops;
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+}
+#endif
+
+static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
+				struct led_init_data *init_data)
+{
+	struct v4l2_flash_config v4l2_config = {0};
+	int ret;
+
+	ret = devm_led_classdev_flash_register_ext(parent, &led->flash,
+						   init_data);
+	if (ret) {
+		dev_err(parent, "Couldn't register flash %d\n", led->led_no);
+		return ret;
+	}
+
+	mt6370_init_v4l2_flash_config(led, &v4l2_config);
+	led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode,
+					  &led->flash, &v4l2_flash_ops,
+					  &v4l2_config);
+	if (IS_ERR(led->v4l2_flash)) {
+		dev_err(parent, "Failed to register %d v4l2 sd\n", led->led_no);
+		return PTR_ERR(led->v4l2_flash);
+	}
+
+	return 0;
+}
+
+static u32 clamp_align(u32 val, u32 min, u32 max, u32 step)
+{
+	u32 retval;
+
+	retval = clamp_val(val, min, max);
+	if (step > 1)
+		retval = rounddown(retval - min, step) + min;
+
+	return retval;
+}
+
+static int mt6370_init_flash_properties(struct mt6370_led *led,
+					struct led_init_data *init_data)
+{
+	struct led_classdev_flash *flash = &led->flash;
+	struct led_classdev *lcdev = &flash->led_cdev;
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s;
+	u32 sources[MT6370_MAX_LEDS];
+	u32 max_uA, val;
+	int i, ret, num;
+
+	num = fwnode_property_count_u32(init_data->fwnode, "led-sources");
+	if (num < 1 || num > MT6370_MAX_LEDS) {
+		dev_err(priv->dev,
+			"Not specified or wrong number of led-sources\n");
+		return -EINVAL;
+	}
+
+	ret = fwnode_property_read_u32_array(init_data->fwnode,
+					     "led-sources", sources, num);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num; i++) {
+		if (sources[i] >= MT6370_MAX_LEDS)
+			return -EINVAL;
+		if (priv->leds_active & BIT(sources[i]))
+			return -EINVAL;
+		priv->leds_active |= BIT(sources[i]);
+
+	}
+	led->led_no = (num == MT6370_MAX_LEDS) ? MT6370_LED_JOINT :
+		       sources[0];
+
+	max_uA = (num == 2) ? MT6370_ITORCH_DOUBLE_MAXUA : MT6370_ITORCH_MAXUA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp",
+				       &val);
+	if (ret) {
+		dev_warn(priv->dev,
+		     "Not specified led-max-microamp, config to the minimum\n");
+		val = MT6370_ITORCH_MINUA;
+	} else
+		val = clamp_align(val, MT6370_ITORCH_MINUA, max_uA,
+				  MT6370_ITORCH_STEPUA);
+
+	lcdev->max_brightness = (val - MT6370_ITORCH_MINUA) /
+				MT6370_ITORCH_STEPUA + 1;
+	lcdev->brightness_set_blocking = mt6370_torch_brightness_set;
+	lcdev->flags |= LED_DEV_CAP_FLASH;
+
+	max_uA = (num == 2) ? MT6370_ISTRB_DOUBLE_MAXUA : MT6370_ISTRB_MAXUA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp",
+				       &val);
+	if (ret) {
+		dev_warn(priv->dev,
+		   "Not specified flash-max-microamp, config to the minimum\n");
+		val = MT6370_ISTRB_MINUA;
+	} else
+		val = clamp_align(val, MT6370_ISTRB_MINUA, max_uA,
+				  MT6370_ISTRB_STEPUA);
+
+	s = &flash->brightness;
+	s->min = MT6370_ISTRB_MINUA;
+	s->step = MT6370_ISTRB_STEPUA;
+	s->val = s->max = val;
+
+	/*
+	 * Always configure as min level when off to
+	 * prevent flash current spike
+	 */
+	ret = _mt6370_flash_brightness_set(flash, s->min);
+	if (ret)
+		return ret;
+
+	ret = fwnode_property_read_u32(init_data->fwnode,
+				       "flash-max-timeout-us", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+		 "Not specified flash-max-timeout-us, config to the minimum\n");
+		val = MT6370_STRBTO_MINUS;
+	} else
+		val = clamp_align(val, MT6370_STRBTO_MINUS, MT6370_STRBTO_MAXUS,
+				  MT6370_STRBTO_STEPUS);
+
+
+	s = &flash->timeout;
+	s->min = MT6370_STRBTO_MINUS;
+	s->step = MT6370_STRBTO_STEPUS;
+	s->val = s->max = val;
+
+	flash->ops = &mt6370_flash_ops;
+
+	return 0;
+}
+
+static int mt6370_init_common_properties(struct mt6370_led *led,
+					 struct led_init_data *init_data)
+{
+	const char * const states[] = { "off", "keep", "on" };
+	const char *str = states[STATE_OFF];
+	int ret;
+
+	fwnode_property_read_string(init_data->fwnode, "default-state", &str);
+	ret = match_string(states, ARRAY_SIZE(states), str);
+	if (ret >= 0)
+		led->default_state = ret;
+
+	return 0;
+}
+
+static void mt6370_v4l2_flash_release(struct mt6370_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->leds_count; i++) {
+		struct mt6370_led *led = priv->leds + i;
+
+		if (led->v4l2_flash)
+			v4l2_flash_release(led->v4l2_flash);
+	}
+}
+
+static int mt6370_led_probe(struct platform_device *pdev)
+{
+	struct mt6370_priv *priv;
+	struct fwnode_handle *child;
+	size_t count;
+	int i = 0, ret;
+
+	count = device_get_child_node_count(&pdev->dev);
+	if (!count || count > MT6370_MAX_LEDS)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+		       "No child node or node count over max led number %zu\n",
+		       count);
+
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, leds, count),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->leds_count = count;
+	priv->dev = &pdev->dev;
+	mutex_init(&priv->lock);
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Failed to get parent regmap\n");
+
+	device_for_each_child_node(&pdev->dev, child) {
+		struct mt6370_led *led = priv->leds + i;
+		struct led_init_data init_data = { .fwnode = child, };
+
+		led->priv = priv;
+		ret = mt6370_init_common_properties(led, &init_data);
+		if (ret)
+			goto out_flash_release;
+
+		ret = mt6370_init_flash_properties(led, &init_data);
+
+		if (ret)
+			goto out_flash_release;
+
+		ret = mt6370_led_register(&pdev->dev, led, &init_data);
+		if (ret)
+			goto out_flash_release;
+
+		i++;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	return 0;
+
+out_flash_release:
+	mt6370_v4l2_flash_release(priv);
+	return ret;
+}
+
+static int mt6370_led_remove(struct platform_device *pdev)
+{
+	struct mt6370_priv *priv = platform_get_drvdata(pdev);
+
+	mt6370_v4l2_flash_release(priv);
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused mt6370_led_of_id[] = {
+	{ .compatible = "mediatek,mt6370-flashlight", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_led_of_id);
+
+static struct platform_driver mt6370_led_driver = {
+	.driver = {
+		.name = "mt6370-flashlight",
+		.of_match_table = mt6370_led_of_id,
+	},
+	.probe = mt6370_led_probe,
+	.remove = mt6370_led_remove,
+};
+module_platform_driver(mt6370_led_driver);
+
+MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>");
+MODULE_DESCRIPTION("MT6370 FLASH LED Driver");
+MODULE_LICENSE("GPL v2");