diff mbox series

[v3,2/9] arm64: dts: sdm845: Remove redundant u-boot DT properties

Message ID 20220712071212.2188390-3-sumit.garg@linaro.org
State Accepted
Commit 866985b7e6fd91ecfd17229d1a35cb21c281a0b7
Headers show
Series New boards support: db845c and qcs404-evb | expand

Commit Message

Sumit Garg July 12, 2022, 7:12 a.m. UTC 
According to u-boot DT recomendation, u-boot specific DT properties belong
to *-uboot.dtsi. Also for starqltechn board (which is the only current
consumer of sdm845.dtsi), the properties are already included in
starqltechn-uboot.dtsi, so remove corresponding redundant properties.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
---
 arch/arm/dts/sdm845.dtsi | 3 ---
 1 file changed, 3 deletions(-)

Comments

Tom Rini July 25, 2022, 9:21 p.m. UTC | #1 
On Tue, Jul 12, 2022 at 12:42:05PM +0530, Sumit Garg wrote:

> According to u-boot DT recomendation, u-boot specific DT properties belong
> to *-uboot.dtsi. Also for starqltechn board (which is the only current
> consumer of sdm845.dtsi), the properties are already included in
> starqltechn-uboot.dtsi, so remove corresponding redundant properties.
> 
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi
index 6f2fb20d68..88030156d9 100644
--- a/arch/arm/dts/sdm845.dtsi
+++ b/arch/arm/dts/sdm845.dtsi
@@ -18,7 +18,6 @@ 
 		compatible = "simple-bus";
 
 		gcc: clock-controller@100000 {
-			u-boot,dm-pre-reloc;
 			compatible = "qcom,gcc-sdm845";
 			reg = <0x100000 0x1f0000>;
 			#clock-cells = <1>;
@@ -27,7 +26,6 @@ 
 		};
 
 		gpio_north: gpio_north@3900000 {
-			u-boot,dm-pre-reloc;
 			#gpio-cells = <2>;
 			compatible = "qcom,sdm845-pinctrl";
 			reg = <0x3900000 0x400000>;
@@ -38,7 +36,6 @@ 
 		};
 
 		tlmm_north: pinctrl_north@3900000 {
-			u-boot,dm-pre-reloc;
 			compatible = "qcom,tlmm-sdm845";
 			reg = <0x3900000 0x400000>;
 			gpio-count = <150>;