diff mbox series

[5/6] dt-bindings: net: explicitly list SPI CPHA and CPOL

Message ID 20220721153155.245336-6-krzysztof.kozlowski@linaro.org
State New
Headers show
Series dt-bindings: iio/panel/eeprom/misc/net/spi: drop SPI CPHA and CPOL | expand

Commit Message

Krzysztof Kozlowski July 21, 2022, 3:31 p.m. UTC
The spi-cpha and spi-cpol properties are device specific and should be
accepted only if device really needs them.  Explicitly list them in
device bindings in preparation of their removal from generic
spi-peripheral-props.yaml schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/net/nfc/marvell,nci.yaml     | 12 ++++++++++--
 .../devicetree/bindings/net/vertexcom-mse102x.yaml   | 12 +++++++++---
 2 files changed, 19 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
index 1bcaf6ba822c..00b3918a9bf2 100644
--- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
@@ -56,8 +56,16 @@  properties:
     description: |
       For UART type of connection. Specifies that the chip is using RTS/CTS.
 
-  spi-cpha: true
-  spi-cpol: true
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
+
   spi-max-frequency: true
 
 required:
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
index 8156a9aeb589..9dc1609f6d06 100644
--- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -34,9 +34,15 @@  properties:
   interrupts:
     maxItems: 1
 
-  spi-cpha: true
-
-  spi-cpol: true
+  spi-cpha:
+    type: boolean
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    type: boolean
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
 
   spi-max-frequency:
     minimum: 6000000