diff mbox series

[4/5] ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices

Message ID 20220725134857.855-4-yegorslists@googlemail.com
State Superseded
Headers show
Series [1/5] ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices | expand

Commit Message

Yegor Yefremov July 25, 2022, 1:48 p.m. UTC
From: Yegor Yefremov <yegorslists@googlemail.com>

Add GPIO names for both SoC and TCA6416 lines.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
 arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 156 +++++++++++++++++++
 1 file changed, 156 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index 96dffd3ffd85..ad3adc7679f9 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -71,6 +71,10 @@ 
 		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7";
 	};
 };
 
@@ -86,6 +90,10 @@ 
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3",
+				  "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3",
+				  "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3",
+				  "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3";
 	};
 
 	tca6416c: gpio@21 {
@@ -93,6 +101,10 @@ 
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3",
+				  "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3",
+				  "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3",
+				  "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3";
 	};
 };
 
@@ -113,3 +125,147 @@ 
 	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"I2C2_SDA",
+		"I2C2_SCL",
+		"NC",
+		"NC",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"SW2_0_alt",
+		"SW2_1_alt",
+		"SW2_2_alt",
+		"SW2_3_alt",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"3G_PWR_EN",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};