diff mbox series

[v2,03/10] dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml

Message ID 20220727164646.387541-4-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series dt-bindings: iio: use spi-peripheral-props.yaml | expand

Commit Message

Krzysztof Kozlowski July 27, 2022, 4:46 p.m. UTC
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/iio/amplifiers/adi,ada4250.yaml    | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
index 5277479be382..c15da155d300 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -27,14 +27,15 @@  properties:
       Enable internal buffer to drive the reference pin.
     type: boolean
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - avdd-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |