new file mode 100644
@@ -0,0 +1,61 @@
+..
+ BSD LICENSE
+
+ Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Intel® IXGBE driver
+===================
+
+This directory contains source code of FreeBSD ixgbe driver of version
+cid-10g-shared-code.2015.06.05 released by ND. The sub-directory of base/
+contains the original source package.
+This driver is valid for the product(s) listed below
+
+* Intel® 10 Gigabit AF DA Dual Port Server Adapter
+* Intel® 10 Gigabit AT Server Adapter
+* Intel® 10 Gigabit AT2 Server Adapter
+* Intel® 10 Gigabit CX4 Dual Port Server Adapter
+* Intel® 10 Gigabit XF LR Server Adapter
+* Intel® 10 Gigabit XF SR Dual Port Server Adapter
+* Intel® 10 Gigabit XF SR Server Adapter
+* Intel® 82598 10 Gigabit Ethernet Controller
+* Intel® 82599 10 Gigabit Ethernet Controller
+* Intel® Ethernet Controller X540-AT2
+* Intel® Ethernet Server Adapter X520 Series
+* Intel® Ethernet Server Adapter X520-T2
+* Intel® Ethernet Controller X550-BT2
+
+Updating the driver
+===================
+
+NOTE: The source code in this directory should not be modified apart from
+the following file(s):
+
+ ixgbe_osdep.h
new file mode 100644
@@ -0,0 +1,1436 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_82598.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82598_MAX_TX_QUEUES 32
+#define IXGBE_82598_MAX_RX_QUEUES 64
+#define IXGBE_82598_RAR_ENTRIES 16
+#define IXGBE_82598_MC_TBL_SIZE 128
+#define IXGBE_82598_VFT_TBL_SIZE 128
+#define IXGBE_82598_RX_PB_SIZE 512
+
+STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *link_up,
+ bool link_up_wait_to_complete);
+STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw);
+STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+ u32 headroom, int strategy);
+STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data);
+/**
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+ u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 250ms through the GCR register
+ */
+ if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+ gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2);
+ pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+ IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
+ * ixgbe_init_ops_82598 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for 82598.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_82598");
+
+ ret_val = ixgbe_init_phy_ops_generic(hw);
+ ret_val = ixgbe_init_ops_generic(hw);
+
+ /* PHY */
+ phy->ops.init = ixgbe_init_phy_ops_82598;
+
+ /* MAC */
+ mac->ops.start_hw = ixgbe_start_hw_82598;
+ mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_82598;
+ mac->ops.reset_hw = ixgbe_reset_hw_82598;
+ mac->ops.get_media_type = ixgbe_get_media_type_82598;
+ mac->ops.get_supported_physical_layer =
+ ixgbe_get_supported_physical_layer_82598;
+ mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82598;
+ mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82598;
+ mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie_82598;
+ mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82598;
+
+ /* RAR, Multicast, VLAN */
+ mac->ops.set_vmdq = ixgbe_set_vmdq_82598;
+ mac->ops.clear_vmdq = ixgbe_clear_vmdq_82598;
+ mac->ops.set_vfta = ixgbe_set_vfta_82598;
+ mac->ops.set_vlvf = NULL;
+ mac->ops.clear_vfta = ixgbe_clear_vfta_82598;
+
+ /* Flow Control */
+ mac->ops.fc_enable = ixgbe_fc_enable_82598;
+
+ mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+ mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE;
+ mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+ /* SFP+ Module */
+ phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_82598;
+ phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_82598;
+
+ /* Link */
+ mac->ops.check_link = ixgbe_check_mac_link_82598;
+ mac->ops.setup_link = ixgbe_setup_mac_link_82598;
+ mac->ops.flap_tx_laser = NULL;
+ mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82598;
+ mac->ops.setup_rxpba = ixgbe_set_rxpba_82598;
+
+ /* Manageability interface */
+ mac->ops.set_fw_drv_ver = NULL;
+
+ mac->ops.get_rtrup2tc = NULL;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val = IXGBE_SUCCESS;
+ u16 list_offset, data_offset;
+
+ DEBUGFUNC("ixgbe_init_phy_ops_82598");
+
+ /* Identify the PHY */
+ phy->ops.identify(hw);
+
+ /* Overwrite the link function pointers if copper PHY */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = ixgbe_setup_copper_link_82598;
+ mac->ops.get_link_capabilities =
+ ixgbe_get_copper_link_capabilities_generic;
+ }
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ phy->ops.setup_link = ixgbe_setup_phy_link_tnx;
+ phy->ops.check_link = ixgbe_check_phy_link_tnx;
+ phy->ops.get_firmware_version =
+ ixgbe_get_phy_firmware_version_tnx;
+ break;
+ case ixgbe_phy_nl:
+ phy->ops.reset = ixgbe_reset_phy_nl;
+
+ /* Call SFP+ identify routine to get the SFP+ module type */
+ ret_val = phy->ops.identify_sfp(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+ else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ /* Check to see if SFP+ module is supported */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
+ &list_offset,
+ &data_offset);
+ if (ret_val != IXGBE_SUCCESS) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+ break;
+ default:
+ break;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Disables relaxed ordering Then set pcie completion timeout
+ *
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+ u32 regval;
+ u32 i;
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_start_hw_82598");
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Disable relaxed ordering */
+ for (i = 0; ((i < hw->mac.max_tx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+ }
+
+ for (i = 0; ((i < hw->mac.max_rx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ /* set the completion timeout for interface */
+ ixgbe_set_pcie_completion_timeout(hw);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_82598 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 autoc = 0;
+
+ DEBUGFUNC("ixgbe_get_link_capabilities_82598");
+
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults. If AUTOC value has not been
+ * stored, use the current register value.
+ */
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_1G_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_AN:
+ case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ default:
+ status = IXGBE_ERR_LINK_SETUP;
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_media_type_82598 - Determines media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ DEBUGFUNC("ixgbe_get_media_type_82598");
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->phy.type) {
+ case ixgbe_phy_cu_unknown:
+ case ixgbe_phy_tn:
+ media_type = ixgbe_media_type_copper;
+ goto out;
+ default:
+ break;
+ }
+
+ /* Media type for I82598 is based on device ID */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598:
+ case IXGBE_DEV_ID_82598_BX:
+ /* Default device ID is mezzanine card KX/KX4 */
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ case IXGBE_DEV_ID_82598EB_SFP_LOM:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_82598EB_CX4:
+ case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+ media_type = ixgbe_media_type_cx4;
+ break;
+ case IXGBE_DEV_ID_82598AT:
+ case IXGBE_DEV_ID_82598AT2:
+ media_type = ixgbe_media_type_copper;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+out:
+ return media_type;
+}
+
+/**
+ * ixgbe_fc_enable_82598 - Enable flow control
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 fctrl_reg;
+ u32 rmcs_reg;
+ u32 reg;
+ u32 fcrtl, fcrth;
+ u32 link_speed = 0;
+ int i;
+ bool link_up;
+
+ DEBUGFUNC("ixgbe_fc_enable_82598");
+
+ /* Validate the water mark configuration */
+ if (!hw->fc.pause_time) {
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /* Low water mark of zero causes XOFF floods */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ if (!hw->fc.low_water[i] ||
+ hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+ DEBUGOUT("Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+ }
+ }
+
+ /*
+ * On 82598 having Rx FC on causes resets while doing 1G
+ * so if it's on turn it off once we know link_speed. For
+ * more details see 82598 Specification update.
+ */
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_full:
+ hw->fc.requested_mode = ixgbe_fc_tx_pause;
+ break;
+ case ixgbe_fc_rx_pause:
+ hw->fc.requested_mode = ixgbe_fc_none;
+ break;
+ default:
+ /* no change */
+ break;
+ }
+ }
+
+ /* Negotiate the fc mode to use */
+ ixgbe_fc_autoneg(hw);
+
+ /* Disable any previous flow control settings */
+ fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+ rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+ /*
+ * The possible values of fc.current_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.current_mode) {
+ case ixgbe_fc_none:
+ /*
+ * Flow control is disabled by software override or autoneg.
+ * The code below will actually disable it in the HW.
+ */
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ fctrl_reg |= IXGBE_FCTRL_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ fctrl_reg |= IXGBE_FCTRL_RFCE;
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ /* Set 802.3x based flow control settings. */
+ fctrl_reg |= IXGBE_FCTRL_DPF;
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+ /* Set up and enable Rx high/low water mark thresholds, enable XON. */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+ fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+ }
+
+ }
+
+ /* Configure pause time (2 TCs per register) */
+ reg = hw->fc.pause_time * 0x00010001;
+ for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_mac_link_82598 - Configures MAC link settings
+ * @hw: pointer to hardware structure
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
+ **/
+STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete)
+{
+ u32 autoc_reg;
+ u32 links_reg;
+ u32 i;
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_start_mac_link_82598");
+
+ /* Restart link */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ links_reg = 0; /* Just in case Autoneg time = 0 */
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msec_delay(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ DEBUGOUT("Autonegotiation did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msec_delay(50);
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_link_ready - Function looks for phy link
+ * @hw: pointer to hardware structure
+ *
+ * Function indicates success when phy link is available. If phy is not ready
+ * within 5 seconds of MAC indicating link, the function returns error.
+ **/
+STATIC s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
+{
+ u32 timeout;
+ u16 an_reg;
+
+ if (hw->device_id != IXGBE_DEV_ID_82598AT2)
+ return IXGBE_SUCCESS;
+
+ for (timeout = 0;
+ timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg);
+
+ if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) &&
+ (an_reg & IXGBE_MII_AUTONEG_LINK_UP))
+ break;
+
+ msec_delay(100);
+ }
+
+ if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
+ DEBUGOUT("Link was indicated but link is down\n");
+ return IXGBE_ERR_LINK_SETUP;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_check_mac_link_82598 - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *link_up,
+ bool link_up_wait_to_complete)
+{
+ u32 links_reg;
+ u32 i;
+ u16 link_reg, adapt_comp_reg;
+
+ DEBUGFUNC("ixgbe_check_mac_link_82598");
+
+ /*
+ * SERDES PHY requires us to read link status from undocumented
+ * register 0xC79F. Bit 0 set indicates link is up/ready; clear
+ * indicates link down. OxC00C is read to check that the XAUI lanes
+ * are active. Bit 0 clear indicates active; set indicates inactive.
+ */
+ if (hw->phy.type == ixgbe_phy_nl) {
+ hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV,
+ &adapt_comp_reg);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < hw->mac.max_link_up_time; i++) {
+ if ((link_reg & 1) &&
+ ((adapt_comp_reg & 1) == 0)) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msec_delay(100);
+ hw->phy.ops.read_reg(hw, 0xC79F,
+ IXGBE_TWINAX_DEV,
+ &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C,
+ IXGBE_TWINAX_DEV,
+ &adapt_comp_reg);
+ }
+ } else {
+ if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if (*link_up == false)
+ goto out;
+ }
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < hw->mac.max_link_up_time; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msec_delay(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if (links_reg & IXGBE_LINKS_SPEED)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) &&
+ (ixgbe_validate_link_ready(hw) != IXGBE_SUCCESS))
+ *link_up = false;
+
+out:
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_mac_link_82598 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ bool autoneg = false;
+ s32 status = IXGBE_SUCCESS;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+ u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc = curr_autoc;
+ u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+
+ DEBUGFUNC("ixgbe_setup_mac_link_82598");
+
+ /* Check to see if speed passed in is supported. */
+ ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
+ speed &= link_capabilities;
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN)
+ status = IXGBE_ERR_LINK_SETUP;
+
+ /* Set KX4/KX support according to speed requested */
+ else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ if (autoc != curr_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ }
+
+ if (status == IXGBE_SUCCESS) {
+ /*
+ * Setup and restart the link based on the new values in
+ * ixgbe_hw This will write the AUTOC register based on the new
+ * stored values
+ */
+ status = ixgbe_start_mac_link_82598(hw,
+ autoneg_wait_to_complete);
+ }
+
+ return status;
+}
+
+
+/**
+ * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ * Sets the link speed in the AUTOC register in the MAC and restarts link.
+ **/
+STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_setup_copper_link_82598");
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.ops.setup_link_speed(hw, speed,
+ autoneg_wait_to_complete);
+ /* Set up MAC */
+ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_82598 - Performs hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks and
+ * clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ * reset.
+ **/
+STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ s32 phy_status = IXGBE_SUCCESS;
+ u32 ctrl;
+ u32 gheccr;
+ u32 i;
+ u32 autoc;
+ u8 analog_val;
+
+ DEBUGFUNC("ixgbe_reset_hw_82598");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+
+ /*
+ * Power up the Atlas Tx lanes if they are currently powered down.
+ * Atlas Tx lanes are powered down for MAC loopback tests, but
+ * they are not automatically restored on reset.
+ */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+ if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
+ /* Enable Tx Atlas so packets can be transmitted again */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ analog_val);
+ }
+
+ /* Reset PHY */
+ if (hw->phy.reset_disable == false) {
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Init PHY and function pointers, perform SFP setup */
+ phy_status = hw->phy.ops.init(hw);
+ if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+ if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto mac_reset_top;
+
+ hw->phy.ops.reset(hw);
+ }
+
+mac_reset_top:
+ /*
+ * Issue global reset to the MAC. This needs to be a SW reset.
+ * If link reset is used, it might reset the MAC when mng is using it
+ */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST))
+ break;
+ }
+ if (ctrl & IXGBE_CTRL_RST) {
+ status = IXGBE_ERR_RESET_FAILED;
+ DEBUGOUT("Reset polling failed to complete.\n");
+ }
+
+ msec_delay(50);
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
+ gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
+ IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
+
+ /*
+ * Store the original AUTOC value if it has not been
+ * stored off yet. Otherwise restore the stored original
+ * AUTOC value since the reset operation sets back to deaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_link_settings_stored = true;
+ } else if (autoc != hw->mac.orig_autoc) {
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table
+ */
+ hw->mac.ops.init_rx_addrs(hw);
+
+reset_hw_out:
+ if (phy_status != IXGBE_SUCCESS)
+ status = phy_status;
+
+ return status;
+}
+
+/**
+ * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq set index
+ **/
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ixgbe_set_vmdq_82598");
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ DEBUGOUT1("RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ UNREFERENCED_1PARAMETER(vmdq);
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ DEBUGOUT1("RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ if (rar_high & IXGBE_RAH_VIND_MASK) {
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_vfta_82598 - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFTA
+ * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ u32 regindex;
+ u32 bitindex;
+ u32 bits;
+ u32 vftabyte;
+
+ DEBUGFUNC("ixgbe_set_vfta_82598");
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /* Determine 32-bit word position in array */
+ regindex = (vlan >> 5) & 0x7F; /* upper seven bits */
+
+ /* Determine the location of the (VMD) queue index */
+ vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+ bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
+
+ /* Set the nibble for VMD queue index */
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
+ bits &= (~(0x0F << bitindex));
+ bits |= (vind << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
+
+ /* Determine the location of the bit for this VLAN id */
+ bitindex = vlan & 0x1F; /* lower five bits */
+
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+ if (vlan_on)
+ /* Turn on this VLAN id */
+ bits |= (1 << bitindex);
+ else
+ /* Turn off this VLAN id */
+ bits &= ~(1 << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
+{
+ u32 offset;
+ u32 vlanbyte;
+
+ DEBUGFUNC("ixgbe_clear_vfta_82598");
+
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+ 0);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs read operation to Atlas analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 atlas_ctl;
+
+ DEBUGFUNC("ixgbe_read_analog_reg8_82598");
+
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+ IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(10);
+ atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+ *val = (u8)atlas_ctl;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 atlas_ctl;
+
+ DEBUGFUNC("ixgbe_write_analog_reg8_82598");
+
+ atlas_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(10);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @dev_addr: address to read from
+ * @byte_offset: byte offset to read from dev_addr
+ * @eeprom_data: value read
+ *
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+STATIC s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
+ u8 byte_offset, u8 *eeprom_data)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 sfp_addr = 0;
+ u16 sfp_data = 0;
+ u16 sfp_stat = 0;
+ u16 gssr;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_read_i2c_phy_82598");
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ gssr = IXGBE_GSSR_PHY1_SM;
+ else
+ gssr = IXGBE_GSSR_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ if (hw->phy.type == ixgbe_phy_nl) {
+ /*
+ * NetLogic phy SDA/SCL registers are at addresses 0xC30A to
+ * 0xC30D. These registers are used to talk to the SFP+
+ * module's EEPROM through the SDA/SCL (I2C) interface.
+ */
+ sfp_addr = (dev_addr << 8) + byte_offset;
+ sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
+ hw->phy.ops.write_reg_mdi(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ sfp_addr);
+
+ /* Poll status */
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg_mdi(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &sfp_stat);
+ sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
+ break;
+ msec_delay(10);
+ }
+
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
+ DEBUGOUT("EEPROM read did not pass.\n");
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* Read data */
+ hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data);
+
+ *eeprom_data = (u8)(sfp_data >> 8);
+ } else {
+ status = IXGBE_ERR_PHY;
+ }
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, gssr);
+ return status;
+}
+
+/**
+ * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR,
+ byte_offset, eeprom_data);
+}
+
+/**
+ * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @eeprom_data: value read
+ *
+ * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data)
+{
+ return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2,
+ byte_offset, sff8472_data);
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_get_supported_physical_layer_82598");
+
+ hw->phy.ops.identify(hw);
+
+ /* Copper PHY must be checked before AUTOC LMS to determine correct
+ * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ case ixgbe_phy_cu_unknown:
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+ if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+ goto out;
+ default:
+ break;
+ }
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_AN:
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ else
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+ break;
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+ else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ else /* XAUI */
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ case IXGBE_AUTOC_LMS_KX4_AN:
+ case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->phy.type == ixgbe_phy_nl) {
+ hw->phy.ops.identify_sfp(hw);
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_da_cu:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_sfp_type_sr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case ixgbe_sfp_type_lr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ }
+ }
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ break;
+ }
+
+out:
+ return physical_layer;
+}
+
+/**
+ * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ * port devices.
+ * @hw: pointer to the HW structure
+ *
+ * Calls common function and corrects issue with some single port devices
+ * that enable LAN1 but not LAN0.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bus_info *bus = &hw->bus;
+ u16 pci_gen = 0;
+ u16 pci_ctrl2 = 0;
+
+ DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie_82598");
+
+ ixgbe_set_lan_id_multi_port_pcie(hw);
+
+ /* check if LAN0 is disabled */
+ hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
+ if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
+
+ hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
+
+ /* if LAN0 is completely disabled force function to 0 */
+ if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
+
+ bus->func = 0;
+ }
+ }
+}
+
+/**
+ * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering
+ * @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw)
+{
+ u32 regval;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_enable_relaxed_ordering_82598");
+
+ /* Enable relaxed ordering */
+ for (i = 0; ((i < hw->mac.max_tx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+ }
+
+ for (i = 0; ((i < hw->mac.max_rx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+}
+
+/**
+ * ixgbe_set_rxpba_82598 - Initialize RX packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+ u32 headroom, int strategy)
+{
+ u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
+ u8 i = 0;
+ UNREFERENCED_1PARAMETER(headroom);
+
+ if (!num_pb)
+ return;
+
+ /* Setup Rx packet buffer sizes */
+ switch (strategy) {
+ case PBA_STRATEGY_WEIGHTED:
+ /* Setup the first four at 80KB */
+ rxpktsize = IXGBE_RXPBSIZE_80KB;
+ for (; i < 4; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ /* Setup the last four at 48KB...don't re-init i */
+ rxpktsize = IXGBE_RXPBSIZE_48KB;
+ /* Fall Through */
+ case PBA_STRATEGY_EQUAL:
+ default:
+ /* Divide the remaining Rx packet buffer evenly among the TCs */
+ for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ break;
+ }
+
+ /* Setup Tx packet buffer sizes */
+ for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
+}
+
+/**
+ * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit
+ **/
+s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval)
+{
+ DEBUGFUNC("ixgbe_enable_rx_dma_82598");
+
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+
+ return IXGBE_SUCCESS;
+}
new file mode 100644
@@ -0,0 +1,52 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_82598_H_
+#define _IXGBE_82598_H_
+
+u32 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw);
+s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw);
+void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw);
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on);
+s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data);
+u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw);
+void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw);
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval);
+#endif /* _IXGBE_82598_H_ */
new file mode 100644
@@ -0,0 +1,2580 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_82599.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82599_MAX_TX_QUEUES 128
+#define IXGBE_82599_MAX_RX_QUEUES 128
+#define IXGBE_82599_RAR_ENTRIES 128
+#define IXGBE_82599_MC_TBL_SIZE 128
+#define IXGBE_82599_VFT_TBL_SIZE 128
+#define IXGBE_82599_RX_PB_SIZE 512
+
+STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+ u16 offset, u16 *data);
+STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
+
+void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ DEBUGFUNC("ixgbe_init_mac_link_ops_82599");
+
+ /*
+ * enable the laser control functions for SFP+ fiber
+ * and MNG not enabled
+ */
+ if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ !ixgbe_mng_enabled(hw)) {
+ mac->ops.disable_tx_laser =
+ ixgbe_disable_tx_laser_multispeed_fiber;
+ mac->ops.enable_tx_laser =
+ ixgbe_enable_tx_laser_multispeed_fiber;
+ mac->ops.flap_tx_laser = ixgbe_flap_tx_laser_multispeed_fiber;
+
+ } else {
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
+ mac->ops.flap_tx_laser = NULL;
+ }
+
+ if (hw->phy.multispeed_fiber) {
+ /* Set up dual speed SFP+ support */
+ mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599;
+ mac->ops.set_rate_select_speed =
+ ixgbe_set_hard_rate_select_speed;
+ } else {
+ if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) &&
+ (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
+ hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+ !ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ mac->ops.setup_link = ixgbe_setup_mac_link_smartspeed;
+ } else {
+ mac->ops.setup_link = ixgbe_setup_mac_link_82599;
+ }
+ }
+}
+
+/**
+ * ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 esdp;
+
+ DEBUGFUNC("ixgbe_init_phy_ops_82599");
+
+ if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+ /* Store flag indicating I2C bus access control unit. */
+ hw->phy.qsfp_shared_i2c_bus = TRUE;
+
+ /* Initialize access to QSFP+ I2C bus */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0_DIR;
+ esdp &= ~IXGBE_ESDP_SDP1_DIR;
+ esdp &= ~IXGBE_ESDP_SDP0;
+ esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+ esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_82599;
+ phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_82599;
+ }
+ /* Identify the PHY or SFP module */
+ ret_val = phy->ops.identify(hw);
+ if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto init_phy_ops_out;
+
+ /* Setup function pointers based on detected SFP module and speeds */
+ ixgbe_init_mac_link_ops_82599(hw);
+ if (hw->phy.sfp_type != ixgbe_sfp_type_unknown)
+ hw->phy.ops.reset = NULL;
+
+ /* If copper media, overwrite with copper function pointers */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = ixgbe_setup_copper_link_82599;
+ mac->ops.get_link_capabilities =
+ ixgbe_get_copper_link_capabilities_generic;
+ }
+
+ /* Set necessary function pointers based on PHY type */
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ phy->ops.setup_link = ixgbe_setup_phy_link_tnx;
+ phy->ops.check_link = ixgbe_check_phy_link_tnx;
+ phy->ops.get_firmware_version =
+ ixgbe_get_phy_firmware_version_tnx;
+ break;
+ default:
+ break;
+ }
+init_phy_ops_out:
+ return ret_val;
+}
+
+s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u16 list_offset, data_offset, data_value;
+
+ DEBUGFUNC("ixgbe_setup_sfp_modules_82599");
+
+ if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ hw->phy.ops.reset = NULL;
+
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+ if (ret_val != IXGBE_SUCCESS)
+ goto setup_sfp_out;
+
+ /* PHY config will finish before releasing the semaphore */
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != IXGBE_SUCCESS) {
+ ret_val = IXGBE_ERR_SWFW_SYNC;
+ goto setup_sfp_out;
+ }
+
+ if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+ goto setup_sfp_err;
+ while (data_value != 0xffff) {
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
+ IXGBE_WRITE_FLUSH(hw);
+ if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+ goto setup_sfp_err;
+ }
+
+ /* Release the semaphore */
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ /* Delay obtaining semaphore again to allow FW access
+ * prot_autoc_write uses the semaphore too.
+ */
+ msec_delay(hw->eeprom.semaphore_delay);
+
+ /* Restart DSP and set SFI mode */
+ ret_val = hw->mac.ops.prot_autoc_write(hw,
+ hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
+ false);
+
+ if (ret_val) {
+ DEBUGOUT("sfp module setup not complete\n");
+ ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+ goto setup_sfp_out;
+ }
+
+ }
+
+setup_sfp_out:
+ return ret_val;
+
+setup_sfp_err:
+ /* Release the semaphore */
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ /* Delay obtaining semaphore again to allow FW access */
+ msec_delay(hw->eeprom.semaphore_delay);
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", data_offset);
+ return IXGBE_ERR_PHY;
+}
+
+/**
+ * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
+ * @hw: pointer to hardware structure
+ * @locked: Return the if we locked for this read.
+ * @reg_val: Value we read from AUTOC
+ *
+ * For this part (82599) we need to wrap read-modify-writes with a possible
+ * FW/SW lock. It is assumed this lock will be freed with the next
+ * prot_autoc_write_82599().
+ */
+s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+ s32 ret_val;
+
+ *locked = false;
+ /* If LESM is on then we need to hold the SW/FW semaphore. */
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ *locked = true;
+ }
+
+ *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ * previous proc_autoc_read_82599.
+ *
+ * This part (82599) may need to hold the SW/FW lock around all writes to
+ * AUTOC. Likewise after a write we need to do a pipeline reset.
+ */
+s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
+ /* We only need to get the lock if:
+ * - We didn't do it already (in the read part of a read-modify-write)
+ * - LESM is enabled.
+ */
+ if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ locked = true;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ ret_val = ixgbe_reset_pipeline_82599(hw);
+
+out:
+ /* Free the SW/FW semaphore as we either grabbed it here or
+ * already had it when this function was called.
+ */
+ if (locked)
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_init_ops_82599 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for 82599.
+ * Does not touch the hardware.
+ **/
+
+s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_82599");
+
+ ixgbe_init_phy_ops_generic(hw);
+ ret_val = ixgbe_init_ops_generic(hw);
+
+ /* PHY */
+ phy->ops.identify = ixgbe_identify_phy_82599;
+ phy->ops.init = ixgbe_init_phy_ops_82599;
+
+ /* MAC */
+ mac->ops.reset_hw = ixgbe_reset_hw_82599;
+ mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
+ mac->ops.get_media_type = ixgbe_get_media_type_82599;
+ mac->ops.get_supported_physical_layer =
+ ixgbe_get_supported_physical_layer_82599;
+ mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
+ mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
+ mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82599;
+ mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82599;
+ mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82599;
+ mac->ops.start_hw = ixgbe_start_hw_82599;
+ mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
+ mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
+ mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
+ mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
+ mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
+ mac->ops.prot_autoc_read = prot_autoc_read_82599;
+ mac->ops.prot_autoc_write = prot_autoc_write_82599;
+
+ /* RAR, Multicast, VLAN */
+ mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
+ mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
+ mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
+ mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
+ mac->rar_highwater = 1;
+ mac->ops.set_vfta = ixgbe_set_vfta_generic;
+ mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
+ mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
+ mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
+ mac->ops.setup_sfp = ixgbe_setup_sfp_modules_82599;
+ mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
+ mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
+
+ /* Link */
+ mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82599;
+ mac->ops.check_link = ixgbe_check_mac_link_generic;
+ mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+ mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
+ mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+ mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) &
+ IXGBE_FWSM_MODE_MASK) ? true : false;
+
+ hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
+
+ /* EEPROM */
+ eeprom->ops.read = ixgbe_read_eeprom_82599;
+ eeprom->ops.read_buffer = ixgbe_read_eeprom_buffer_82599;
+
+ /* Manageability interface */
+ mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
+
+ mac->ops.get_thermal_sensor_data =
+ ixgbe_get_thermal_sensor_data_generic;
+ mac->ops.init_thermal_sensor_thresh =
+ ixgbe_init_thermal_sensor_thresh_generic;
+
+ mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_82599 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 autoc = 0;
+
+ DEBUGFUNC("ixgbe_get_link_capabilities_82599");
+
+
+ /* Check if 1G SFP module. */
+ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ goto out;
+ }
+
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults. If AUTOC value has not
+ * been stored, use the current register values.
+ */
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_1G_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_SERIAL:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR:
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_SGMII_1G_100M:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
+ *autoneg = false;
+ break;
+
+ default:
+ status = IXGBE_ERR_LINK_SETUP;
+ goto out;
+ break;
+ }
+
+ if (hw->phy.multispeed_fiber) {
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* QSFP must not enable full auto-negotiation
+ * Limited autoneg is enabled at 1G
+ */
+ if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+ *autoneg = false;
+ else
+ *autoneg = true;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_media_type_82599 - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ DEBUGFUNC("ixgbe_get_media_type_82599");
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->phy.type) {
+ case ixgbe_phy_cu_unknown:
+ case ixgbe_phy_tn:
+ media_type = ixgbe_media_type_copper;
+ goto out;
+ default:
+ break;
+ }
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_KX4:
+ case IXGBE_DEV_ID_82599_KX4_MEZZ:
+ case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+ case IXGBE_DEV_ID_82599_KR:
+ case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+ case IXGBE_DEV_ID_82599_XAUI_LOM:
+ /* Default device ID is mezzanine card KX/KX4 */
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_82599_SFP:
+ case IXGBE_DEV_ID_82599_SFP_FCOE:
+ case IXGBE_DEV_ID_82599_SFP_EM:
+ case IXGBE_DEV_ID_82599_SFP_SF2:
+ case IXGBE_DEV_ID_82599_SFP_SF_QP:
+ case IXGBE_DEV_ID_82599EN_SFP:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_82599_CX4:
+ media_type = ixgbe_media_type_cx4;
+ break;
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ media_type = ixgbe_media_type_copper;
+ break;
+ case IXGBE_DEV_ID_82599_LS:
+ media_type = ixgbe_media_type_fiber_lco;
+ break;
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ media_type = ixgbe_media_type_fiber_qsfp;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+out:
+ return media_type;
+}
+
+/**
+ * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
+ * @hw: pointer to hardware structure
+ *
+ * Disables link during D3 power down sequence.
+ *
+ **/
+void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
+{
+ u32 autoc2_reg;
+ u16 ee_ctrl_2 = 0;
+
+ DEBUGFUNC("ixgbe_stop_mac_link_on_d3_82599");
+ ixgbe_read_eeprom(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
+
+ if (!ixgbe_mng_present(hw) && !hw->wol_enabled &&
+ ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
+ autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+ }
+}
+
+/**
+ * ixgbe_start_mac_link_82599 - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
+ **/
+s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete)
+{
+ u32 autoc_reg;
+ u32 links_reg;
+ u32 i;
+ s32 status = IXGBE_SUCCESS;
+ bool got_lock = false;
+
+ DEBUGFUNC("ixgbe_start_mac_link_82599");
+
+
+ /* reset_pipeline requires us to hold this lock as it writes to
+ * AUTOC.
+ */
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ status = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ got_lock = true;
+ }
+
+ /* Restart link */
+ ixgbe_reset_pipeline_82599(hw);
+
+ if (got_lock)
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /* Just in case Autoneg time = 0 */
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msec_delay(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ DEBUGOUT("Autoneg did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msec_delay(50);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively shutting down the Tx
+ * laser on the PHY, effectively halting physical link.
+ **/
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ return;
+
+ /* Disable Tx laser; allow 100us to go dark per spec */
+ esdp_reg |= IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(100);
+}
+
+/**
+ * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively turning on the Tx
+ * laser on the PHY, effectively starting physical link.
+ **/
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Enable Tx laser; allow 100ms to light up */
+ esdp_reg &= ~IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ msec_delay(100);
+}
+
+/**
+ * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * When the driver changes the link speeds that it can support,
+ * it sets autotry_restart to true to indicate that we need to
+ * initiate a new autotry session with the link partner. To do
+ * so, we set the speed then disable and re-enable the Tx laser, to
+ * alert the link partner that it also needs to restart autotry on its
+ * end. This is consistent with true clause 37 autoneg, which also
+ * involves a loss of signal.
+ **/
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ DEBUGFUNC("ixgbe_flap_tx_laser_multispeed_fiber");
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ return;
+
+ if (hw->mac.autotry_restart) {
+ ixgbe_disable_tx_laser_multispeed_fiber(hw);
+ ixgbe_enable_tx_laser_multispeed_fiber(hw);
+ hw->mac.autotry_restart = false;
+ }
+}
+
+/**
+ * ixgbe_set_hard_rate_select_speed - Set module link speed
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
+ *
+ * Set module link speed via RS0/RS1 rate select pins.
+ */
+void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ switch (speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ break;
+ default:
+ DEBUGOUT("Invalid fixed module speed\n");
+ return;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Implements the Intel SmartSpeed algorithm.
+ **/
+s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = IXGBE_SUCCESS;
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ s32 i, j;
+ bool link_up = false;
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ DEBUGFUNC("ixgbe_setup_mac_link_smartspeed");
+
+ /* Set autoneg_advertised value based on input link speed */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+ /*
+ * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the
+ * autoneg advertisement if link is unable to be established at the
+ * highest negotiated rate. This can sometimes happen due to integrity
+ * issues with the physical media connection.
+ */
+
+ /* First, try to get link with full advertisement */
+ hw->phy.smart_speed_active = false;
+ for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
+ status = ixgbe_setup_mac_link_82599(hw, speed,
+ autoneg_wait_to_complete);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ /*
+ * Wait for the controller to acquire link. Per IEEE 802.3ap,
+ * Section 73.10.2, we may have to wait up to 500ms if KR is
+ * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
+ * Table 9 in the AN MAS.
+ */
+ for (i = 0; i < 5; i++) {
+ msec_delay(100);
+
+ /* If we have link, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up,
+ false);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if (link_up)
+ goto out;
+ }
+ }
+
+ /*
+ * We didn't get link. If we advertised KR plus one of KX4/KX
+ * (or BX4/BX), then disable KR and try again.
+ */
+ if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
+ ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
+ goto out;
+
+ /* Turn SmartSpeed on to disable KR support */
+ hw->phy.smart_speed_active = true;
+ status = ixgbe_setup_mac_link_82599(hw, speed,
+ autoneg_wait_to_complete);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ /*
+ * Wait for the controller to acquire link. 600ms will allow for
+ * the AN link_fail_inhibit_timer as well for multiple cycles of
+ * parallel detect, both 10g and 1g. This allows for the maximum
+ * connect attempts as defined in the AN MAS table 73-7.
+ */
+ for (i = 0; i < 6; i++) {
+ msec_delay(100);
+
+ /* If we have link, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if (link_up)
+ goto out;
+ }
+
+ /* We didn't get link. Turn SmartSpeed back off. */
+ hw->phy.smart_speed_active = false;
+ status = ixgbe_setup_mac_link_82599(hw, speed,
+ autoneg_wait_to_complete);
+
+out:
+ if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
+ DEBUGOUT("Smartspeed has downgraded the link speed "
+ "from the maximum advertised\n");
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_82599 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ bool autoneg = false;
+ s32 status = IXGBE_SUCCESS;
+ u32 pma_pmd_1g, link_mode;
+ u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); /* holds the value of AUTOC register at this current point in time */
+ u32 orig_autoc = 0; /* holds the cached value of AUTOC register */
+ u32 autoc = current_autoc; /* Temporary variable used for comparison purposes */
+ u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+ u32 links_reg;
+ u32 i;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+
+ DEBUGFUNC("ixgbe_setup_mac_link_82599");
+
+ /* Check to see if speed passed in is supported. */
+ status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
+ if (status)
+ goto out;
+
+ speed &= link_capabilities;
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
+ status = IXGBE_ERR_LINK_SETUP;
+ goto out;
+ }
+
+ /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+ if (hw->mac.orig_link_settings_stored)
+ orig_autoc = hw->mac.orig_autoc;
+ else
+ orig_autoc = autoc;
+
+ link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+ pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+
+ if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ /* Set KX4/KX/KR support according to speed requested */
+ autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
+ (hw->phy.smart_speed_active == false))
+ autoc |= IXGBE_AUTOC_KR_SUPP;
+ }
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+ link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+ /* Switch from 1G SFI to 10G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+ (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
+ }
+ } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+ /* Switch from 10G SFI to 1G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+ (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ if (autoneg || hw->phy.type == ixgbe_phy_qsfp_intel)
+ autoc |= IXGBE_AUTOC_LMS_1G_AN;
+ else
+ autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+ }
+ }
+
+ if (autoc != current_autoc) {
+ /* Restart link */
+ status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /*Just in case Autoneg time=0*/
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg =
+ IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msec_delay(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status =
+ IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ DEBUGOUT("Autoneg did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msec_delay(50);
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ * Restarts link on PHY and MAC based on settings passed in.
+ **/
+STATIC s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_setup_copper_link_82599");
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.ops.setup_link_speed(hw, speed,
+ autoneg_wait_to_complete);
+ /* Set up MAC */
+ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_82599 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ **/
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+{
+ ixgbe_link_speed link_speed;
+ s32 status;
+ u32 ctrl = 0;
+ u32 i, autoc, autoc2;
+ u32 curr_lms;
+ bool link_up = false;
+
+ DEBUGFUNC("ixgbe_reset_hw_82599");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Identify PHY and related function pointers */
+ status = hw->phy.ops.init(hw);
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+
+ /* Setup SFP module if there is one present. */
+ if (hw->phy.sfp_setup_needed) {
+ status = hw->mac.ops.setup_sfp(hw);
+ hw->phy.sfp_setup_needed = false;
+ }
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+
+ /* Reset PHY */
+ if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+ hw->phy.ops.reset(hw);
+
+ /* remember AUTOC from before we reset */
+ curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
+
+mac_reset_top:
+ /*
+ * Issue global reset to the MAC. Needs to be SW reset if link is up.
+ * If link reset is used when link is up, it might reset the PHY when
+ * mng is using it. If link is down or the flag to force full link
+ * reset is set, then perform link reset.
+ */
+ ctrl = IXGBE_CTRL_LNK_RST;
+ if (!hw->force_full_reset) {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up)
+ ctrl = IXGBE_CTRL_RST;
+ }
+
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear meaning reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
+ break;
+ }
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
+ status = IXGBE_ERR_RESET_FAILED;
+ DEBUGOUT("Reset polling failed to complete.\n");
+ }
+
+ msec_delay(50);
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to
+ * allow time for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ /*
+ * Store the original AUTOC/AUTOC2 values if they have not been
+ * stored off yet. Otherwise restore the stored original
+ * values since the reset operation sets back to defaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+
+ /* Enable link if disabled in NVM */
+ if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+ autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_autoc2 = autoc2;
+ hw->mac.orig_link_settings_stored = true;
+ } else {
+
+ /* If MNG FW is running on a multi-speed device that
+ * doesn't autoneg with out driver support we need to
+ * leave LMS in the state it was before we MAC reset.
+ * Likewise if we support WoL we don't want change the
+ * LMS state.
+ */
+ if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
+ hw->wol_enabled)
+ hw->mac.orig_autoc =
+ (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
+ curr_lms;
+
+ if (autoc != hw->mac.orig_autoc) {
+ status = hw->mac.ops.prot_autoc_write(hw,
+ hw->mac.orig_autoc,
+ false);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+ }
+
+ if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+ (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+ autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+ autoc2 |= (hw->mac.orig_autoc2 &
+ IXGBE_AUTOC2_UPPER_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+ }
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ /* Store the permanent SAN mac address */
+ hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+ /* Add the SAN MAC address to the RAR only if it's a valid address */
+ if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+ hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+ hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+ /* Save the SAN MAC RAR index */
+ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
+ /* Reserve the last RAR for the SAN MAC address */
+ hw->mac.num_rar_entries--;
+ }
+
+ /* Store the alternative WWNN/WWPN prefix */
+ hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+ &hw->mac.wwpn_prefix);
+
+reset_hw_out:
+ return status;
+}
+
+/**
+ * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
+ * @hw: pointer to hardware structure
+ * @fdircmd: current value of FDIRCMD register
+ */
+STATIC s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+ *fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
+ if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK))
+ return IXGBE_SUCCESS;
+ usec_delay(10);
+ }
+
+ return IXGBE_ERR_FDIR_CMD_INCOMPLETE;
+}
+
+/**
+ * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
+{
+ s32 err;
+ int i;
+ u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+ u32 fdircmd;
+ fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
+
+ DEBUGFUNC("ixgbe_reinit_fdir_tables_82599");
+
+ /*
+ * Before starting reinitialization process,
+ * FDIRCMD.CMD must be zero.
+ */
+ err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+ if (err) {
+ DEBUGOUT("Flow Director previous command did not complete, aborting table re-initialization.\n");
+ return err;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
+ IXGBE_WRITE_FLUSH(hw);
+ /*
+ * 82599 adapters flow director init flow cannot be restarted,
+ * Workaround 82599 silicon errata by performing the following steps
+ * before re-writing the FDIRCTRL control register with the same value.
+ * - write 1 to bit 8 of FDIRCMD register &
+ * - write 0 to bit 8 of FDIRCMD register
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+ (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+ IXGBE_FDIRCMD_CLEARHT));
+ IXGBE_WRITE_FLUSH(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+ (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+ ~IXGBE_FDIRCMD_CLEARHT));
+ IXGBE_WRITE_FLUSH(hw);
+ /*
+ * Clear FDIR Hash register to clear any leftover hashes
+ * waiting to be programmed.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
+ IXGBE_WRITE_FLUSH(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll init-done after we write FDIRCTRL register */
+ for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+ if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+ IXGBE_FDIRCTRL_INIT_DONE)
+ break;
+ msec_delay(1);
+ }
+ if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+ DEBUGOUT("Flow Director Signature poll time exceeded!\n");
+ return IXGBE_ERR_FDIR_REINIT_FAILED;
+ }
+
+ /* Clear FDIR statistics registers (read to clear) */
+ IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+ IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+ IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+ IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+ IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register
+ **/
+STATIC void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+ int i;
+
+ DEBUGFUNC("ixgbe_fdir_enable_82599");
+
+ /* Prime the keys for hashing */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
+
+ /*
+ * Poll init-done after we write the register. Estimated times:
+ * 10G: PBALLOC = 11b, timing is 60us
+ * 1G: PBALLOC = 11b, timing is 600us
+ * 100M: PBALLOC = 11b, timing is 6ms
+ *
+ * Multiple these timings by 4 if under full Rx load
+ *
+ * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+ * 1 msec per poll time. If we're at line rate and drop to 100M, then
+ * this might not finish in our poll time, but we can live with that
+ * for now.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+ IXGBE_WRITE_FLUSH(hw);
+ for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+ if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+ IXGBE_FDIRCTRL_INIT_DONE)
+ break;
+ msec_delay(1);
+ }
+
+ if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+ DEBUGOUT("Flow Director poll time exceeded!\n");
+}
+
+/**
+ * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register, initially
+ * contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+ DEBUGFUNC("ixgbe_init_fdir_signature_82599");
+
+ /*
+ * Continue setup of fdirctrl register bits:
+ * Move the flexible bytes to use the ethertype - shift 6 words
+ * Set the maximum length per hash bucket to 0xA filters
+ * Send interrupt when 64 filters are left
+ */
+ fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+ (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+ (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+ /* write hashes and fdirctrl register, poll for completion */
+ ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register, initially
+ * contains just the value of the Rx packet buffer allocation
+ * @cloud_mode: true - cloud mode, false - other mode
+ **/
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
+ bool cloud_mode)
+{
+ DEBUGFUNC("ixgbe_init_fdir_perfect_82599");
+
+ /*
+ * Continue setup of fdirctrl register bits:
+ * Turn perfect match filtering on
+ * Report hash in RSS field of Rx wb descriptor
+ * Initialize the drop queue
+ * Move the flexible bytes to use the ethertype - shift 6 words
+ * Set the maximum length per hash bucket to 0xA filters
+ * Send interrupt when 64 (0x4 * 16) filters are left
+ */
+ fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
+ IXGBE_FDIRCTRL_REPORT_STATUS |
+ (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
+ (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+ (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+ (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+ if (cloud_mode)
+ fdirctrl |=(IXGBE_FDIRCTRL_FILTERMODE_CLOUD <<
+ IXGBE_FDIRCTRL_FILTERMODE_SHIFT);
+
+ /* write hashes and fdirctrl register, poll for completion */
+ ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+ return IXGBE_SUCCESS;
+}
+
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define IXGBE_ATR_COMMON_HASH_KEY \
+ (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
+#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+ u32 n = (_n); \
+ if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+ common_hash ^= lo_hash_dword >> n; \
+ else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+ bucket_hash ^= lo_hash_dword >> n; \
+ else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+ sig_hash ^= lo_hash_dword << (16 - n); \
+ if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+ common_hash ^= hi_hash_dword >> n; \
+ else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+ bucket_hash ^= hi_hash_dword >> n; \
+ else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+ sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0)
+
+/**
+ * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
+ * @stream: input bitstream to compute the hash on
+ *
+ * This function is almost identical to the function above but contains
+ * several optimizations such as unwinding all of the loops, letting the
+ * compiler work out all of the conditional ifs since the keys are static
+ * defines, and computing two keys at once since the hashed dword stream
+ * will be the same for both keys.
+ **/
+u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common)
+{
+ u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+ u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
+
+ /* record the flow_vm_vlan bits as they are a key part to the hash */
+ flow_vm_vlan = IXGBE_NTOHL(input.dword);
+
+ /* generate common hash dword */
+ hi_hash_dword = IXGBE_NTOHL(common.dword);
+
+ /* low dword is word swapped version of common */
+ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+ /* apply flow ID/VM pool/VLAN ID bits to hash words */
+ hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+ /* Process bits 0 and 16 */
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
+
+ /*
+ * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+ * delay this because bit 0 of the stream should not be processed
+ * so we do not add the VLAN until after bit 0 was processed
+ */
+ lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+ /* Process remaining 30 bit of the key */
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
+
+ /* combine common_hash result with signature and bucket hashes */
+ bucket_hash ^= common_hash;
+ bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+ sig_hash ^= common_hash << 16;
+ sig_hash &= IXGBE_ATR_HASH_MASK << 16;
+
+ /* return completed signature hash */
+ return sig_hash ^ bucket_hash;
+}
+
+/**
+ * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
+ * @hw: pointer to hardware structure
+ * @input: unique input dword
+ * @common: compressed common input dword
+ * @queue: queue index to direct traffic to
+ *
+ * Note that the tunnel bit in input must not be set when the hardware
+ * tunneling support does not exist.
+ **/
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common,
+ u8 queue)
+{
+ u64 fdirhashcmd;
+ u8 flow_type;
+ bool tunnel;
+ u32 fdircmd;
+ s32 err;
+
+ DEBUGFUNC("ixgbe_fdir_add_signature_filter_82599");
+
+ /*
+ * Get the flow_type in order to program FDIRCMD properly
+ * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
+ * fifth is FDIRCMD.TUNNEL_FILTER
+ */
+ tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK);
+ flow_type = input.formatted.flow_type &
+ (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1);
+ switch (flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ case IXGBE_ATR_FLOW_TYPE_TCPV6:
+ case IXGBE_ATR_FLOW_TYPE_UDPV6:
+ case IXGBE_ATR_FLOW_TYPE_SCTPV6:
+ break;
+ default:
+ DEBUGOUT(" Error on flow type input\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ /* configure FDIRCMD register */
+ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+ if (tunnel)
+ fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
+
+ /*
+ * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+ * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH.
+ */
+ fdirhashcmd = (u64)fdircmd << 32;
+ fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
+ IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+
+ err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
+
+ DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
+
+ return IXGBE_SUCCESS;
+}
+
+#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
+do { \
+ u32 n = (_n); \
+ if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+ bucket_hash ^= lo_hash_dword >> n; \
+ if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+ bucket_hash ^= hi_hash_dword >> n; \
+} while (0)
+
+/**
+ * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
+ * @atr_input: input bitstream to compute the hash on
+ * @input_mask: mask for the input bitstream
+ *
+ * This function serves two main purposes. First it applies the input_mask
+ * to the atr_input resulting in a cleaned up atr_input data stream.
+ * Secondly it computes the hash and stores it in the bkt_hash field at
+ * the end of the input byte stream. This way it will be available for
+ * future use without needing to recompute the hash.
+ **/
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+ union ixgbe_atr_input *input_mask)
+{
+
+ u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+ u32 bucket_hash = 0;
+ u32 hi_dword = 0;
+ u32 i = 0;
+
+ /* Apply masks to input data */
+ for (i = 0; i < 14; i++)
+ input->dword_stream[i] &= input_mask->dword_stream[i];
+
+ /* record the flow_vm_vlan bits as they are a key part to the hash */
+ flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]);
+
+ /* generate common hash dword */
+ for (i = 1; i <= 13; i++)
+ hi_dword ^= input->dword_stream[i];
+ hi_hash_dword = IXGBE_NTOHL(hi_dword);
+
+ /* low dword is word swapped version of common */
+ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+ /* apply flow ID/VM pool/VLAN ID bits to hash words */
+ hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+ /* Process bits 0 and 16 */
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
+
+ /*
+ * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+ * delay this because bit 0 of the stream should not be processed
+ * so we do not add the VLAN until after bit 0 was processed
+ */
+ lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+ /* Process remaining 30 bit of the key */
+ for (i = 1; i <= 15; i++)
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
+
+ /*
+ * Limit hash to 13 bits since max bucket count is 8K.
+ * Store result at the end of the input stream.
+ */
+ input->formatted.bkt_hash = bucket_hash & 0x1FFF;
+}
+
+/**
+ * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks
+ * @input_mask: mask to be bit swapped
+ *
+ * The source and destination port masks for flow director are bit swapped
+ * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
+ * generate a correctly swapped value we need to bit swap the mask and that
+ * is what is accomplished by this function.
+ **/
+STATIC u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
+{
+ u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port);
+ mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+ mask |= IXGBE_NTOHS(input_mask->formatted.src_port);
+ mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+ mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+ mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+ return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian. As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+ (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+ (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+ IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(IXGBE_NTOHL(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+ IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input_mask, bool cloud_mode)
+{
+ /* mask IPv6 since it is currently not supported */
+ u32 fdirm = IXGBE_FDIRM_DIPv6;
+ u32 fdirtcpm;
+ u32 fdirip6m;
+ DEBUGFUNC("ixgbe_fdir_set_atr_input_mask_82599");
+
+ /*
+ * Program the relevant mask registers. If src/dst_port or src/dst_addr
+ * are zero, then assume a full mask for that field. Also assume that
+ * a VLAN of 0 is unspecified, so mask that out as well. L4type
+ * cannot be masked out in this implementation.
+ *
+ * This also assumes IPv4 only. IPv6 masking isn't supported at this
+ * point in time.
+ */
+
+ /* verify bucket hash is cleared on hash generation */
+ if (input_mask->formatted.bkt_hash)
+ DEBUGOUT(" bucket hash should always be 0 in mask\n");
+
+ /* Program FDIRM and verify partial masks */
+ switch (input_mask->formatted.vm_pool & 0x7F) {
+ case 0x0:
+ fdirm |= IXGBE_FDIRM_POOL;
+ case 0x7F:
+ break;
+ default:
+ DEBUGOUT(" Error on vm pool mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
+ case 0x0:
+ fdirm |= IXGBE_FDIRM_L4P;
+ if (input_mask->formatted.dst_port ||
+ input_mask->formatted.src_port) {
+ DEBUGOUT(" Error on src/dst port mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ case IXGBE_ATR_L4TYPE_MASK:
+ break;
+ default:
+ DEBUGOUT(" Error on flow type mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (IXGBE_NTOHS(input_mask->formatted.vlan_id) & 0xEFFF) {
+ case 0x0000:
+ /* mask VLAN ID, fall through to mask VLAN priority */
+ fdirm |= IXGBE_FDIRM_VLANID;
+ case 0x0FFF:
+ /* mask VLAN priority */
+ fdirm |= IXGBE_FDIRM_VLANP;
+ break;
+ case 0xE000:
+ /* mask VLAN ID only, fall through */
+ fdirm |= IXGBE_FDIRM_VLANID;
+ case 0xEFFF:
+ /* no VLAN fields masked */
+ break;
+ default:
+ DEBUGOUT(" Error on VLAN mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.flex_bytes & 0xFFFF) {
+ case 0x0000:
+ /* Mask Flex Bytes, fall through */
+ fdirm |= IXGBE_FDIRM_FLEX;
+ case 0xFFFF:
+ break;
+ default:
+ DEBUGOUT(" Error on flexible byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ if (cloud_mode) {
+ fdirm |= IXGBE_FDIRM_L3P;
+ fdirip6m = ((u32) 0xFFFFU << IXGBE_FDIRIP6M_DIPM_SHIFT);
+ fdirip6m |= IXGBE_FDIRIP6M_ALWAYS_MASK;
+
+ switch (input_mask->formatted.inner_mac[0] & 0xFF) {
+ case 0x00:
+ /* Mask inner MAC, fall through */
+ fdirip6m |= IXGBE_FDIRIP6M_INNER_MAC;
+ case 0xFF:
+ break;
+ default:
+ DEBUGOUT(" Error on inner_mac byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.tni_vni & 0xFFFFFFFF) {
+ case 0x0:
+ /* Mask vxlan id */
+ fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI;
+ break;
+ case 0x00FFFFFF:
+ fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI_24;
+ break;
+ case 0xFFFFFFFF:
+ break;
+ default:
+ DEBUGOUT(" Error on TNI/VNI byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.tunnel_type & 0xFFFF) {
+ case 0x0:
+ /* Mask turnnel type, fall through */
+ fdirip6m |= IXGBE_FDIRIP6M_TUNNEL_TYPE;
+ case 0xFFFF:
+ break;
+ default:
+ DEBUGOUT(" Error on tunnel type byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIP6M, fdirip6m);
+
+ /* Set all bits in FDIRTCPM, FDIRUDPM, FDIRSIP4M and
+ * FDIRDIP4M in cloud mode to allow L3/L3 packets to
+ * tunnel.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, 0xFFFFFFFF);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, 0xFFFFFFFF);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, 0xFFFFFFFF);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, 0xFFFFFFFF);
+ }
+
+ /* Now mask VM pool and destination IPv6 - bits 5 and 2 */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
+
+ if (!cloud_mode) {
+ /* store the TCP/UDP port masks, bit reversed from port
+ * layout */
+ fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
+
+ /* write both the same so that UDP and TCP use the same mask */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+ /* also use it for SCTP */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
+ break;
+ default:
+ break;
+ }
+
+ /* store source and destination IP masks (big-enian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+ ~input_mask->formatted.src_ip[0]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+ ~input_mask->formatted.dst_ip[0]);
+ }
+ return IXGBE_SUCCESS;
+}
+
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id, u8 queue, bool cloud_mode)
+{
+ u32 fdirport, fdirvlan, fdirhash, fdircmd;
+ u32 addr_low, addr_high;
+ u32 cloud_type = 0;
+ s32 err;
+
+ DEBUGFUNC("ixgbe_fdir_write_perfect_filter_82599");
+ if (!cloud_mode) {
+ /* currently IPv6 is not supported, must be programmed with 0 */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
+ input->formatted.src_ip[0]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
+ input->formatted.src_ip[1]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
+ input->formatted.src_ip[2]);
+
+ /* record the source address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA,
+ input->formatted.src_ip[0]);
+
+ /* record the first 32 bits of the destination address
+ * (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA,
+ input->formatted.dst_ip[0]);
+
+ /* record source and destination port (little-endian)*/
+ fdirport = IXGBE_NTOHS(input->formatted.dst_port);
+ fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+ fdirport |= IXGBE_NTOHS(input->formatted.src_port);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+ }
+
+ /* record VLAN (little-endian) and flex_bytes(big-endian) */
+ fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
+ fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+ fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+ if (cloud_mode) {
+ if (input->formatted.tunnel_type != 0)
+ cloud_type = 0x80000000;
+
+ addr_low = ((u32)input->formatted.inner_mac[0] |
+ ((u32)input->formatted.inner_mac[1] << 8) |
+ ((u32)input->formatted.inner_mac[2] << 16) |
+ ((u32)input->formatted.inner_mac[3] << 24));
+ addr_high = ((u32)input->formatted.inner_mac[4] |
+ ((u32)input->formatted.inner_mac[5] << 8));
+ cloud_type |= addr_high;
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), addr_low);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), cloud_type);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), input->formatted.tni_vni);
+ }
+
+ /* configure FDIRHASH register */
+ fdirhash = input->formatted.bkt_hash;
+ fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+ /*
+ * flush all previous writes to make certain registers are
+ * programmed prior to issuing the command
+ */
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* configure FDIRCMD register */
+ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ if (queue == IXGBE_FDIR_DROP_QUEUE)
+ fdircmd |= IXGBE_FDIRCMD_DROP;
+ if (input->formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK)
+ fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
+ fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+ fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+ err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id)
+{
+ u32 fdirhash;
+ u32 fdircmd;
+ s32 err;
+
+ /* configure FDIRHASH register */
+ fdirhash = input->formatted.bkt_hash;
+ fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+ /* flush hash to HW */
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Query if filter is present */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
+
+ err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+ if (err) {
+ DEBUGOUT("Flow Director command did not complete!\n");
+ return err;
+ }
+
+ /* if filter exists in hardware then remove it */
+ if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+ IXGBE_WRITE_FLUSH(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+ IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
+ * @hw: pointer to hardware structure
+ * @input: input bitstream
+ * @input_mask: mask for the input bitstream
+ * @soft_id: software index for the filters
+ * @queue: queue index to direct traffic to
+ *
+ * Note that the caller to this function must lock before calling, since the
+ * hardware writes must be protected from one another.
+ **/
+s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ union ixgbe_atr_input *input_mask,
+ u16 soft_id, u8 queue, bool cloud_mode)
+{
+ s32 err = IXGBE_ERR_CONFIG;
+
+ DEBUGFUNC("ixgbe_fdir_add_perfect_filter_82599");
+
+ /*
+ * Check flow_type formatting, and bail out before we touch the hardware
+ * if there's a configuration issue
+ */
+ switch (input->formatted.flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_IPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV4:
+ input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK;
+ if (input->formatted.dst_port || input->formatted.src_port) {
+ DEBUGOUT(" Error on src/dst port\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ break;
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4:
+ if (input->formatted.dst_port || input->formatted.src_port) {
+ DEBUGOUT(" Error on src/dst port\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ case IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4:
+ input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
+ IXGBE_ATR_L4TYPE_MASK;
+ break;
+ default:
+ DEBUGOUT(" Error on flow type input\n");
+ return err;
+ }
+
+ /* program input mask into the HW */
+ err = ixgbe_fdir_set_input_mask_82599(hw, input_mask, cloud_mode);
+ if (err)
+ return err;
+
+ /* apply mask and compute/store hash */
+ ixgbe_atr_compute_perfect_hash_82599(input, input_mask);
+
+ /* program filters to filter memory */
+ return ixgbe_fdir_write_perfect_filter_82599(hw, input,
+ soft_id, queue, cloud_mode);
+}
+
+/**
+ * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs read operation to Omer analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 core_ctl;
+
+ DEBUGFUNC("ixgbe_read_analog_reg8_82599");
+
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
+ (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(10);
+ core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
+ *val = (u8)core_ctl;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Omer analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 core_ctl;
+
+ DEBUGFUNC("ixgbe_write_analog_reg8_82599");
+
+ core_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(10);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_start_hw_82599");
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ ret_val = ixgbe_start_hw_gen2(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ /* We need to run link autotry after the driver loads */
+ hw->mac.autotry_restart = true;
+
+ if (ret_val == IXGBE_SUCCESS)
+ ret_val = ixgbe_verify_fw_version_82599(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_identify_phy_82599 - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ * If PHY already detected, maintains current PHY type in hw struct,
+ * otherwise executes the PHY detection routine.
+ **/
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_identify_phy_82599");
+
+ /* Detect PHY if not unknown - returns success if already detected. */
+ status = ixgbe_identify_phy_generic(hw);
+ if (status != IXGBE_SUCCESS) {
+ /* 82599 10GBASE-T requires an external PHY */
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
+ return status;
+ else
+ status = ixgbe_identify_module_generic(hw);
+ }
+
+ /* Set PHY type none if no PHY detected */
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.type = ixgbe_phy_none;
+ return IXGBE_SUCCESS;
+ }
+
+ /* Return error if SFP module has been detected but is not supported */
+ if (hw->phy.type == ixgbe_phy_sfp_unsupported)
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ return status;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+ u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_get_support_physical_layer_82599");
+
+ hw->phy.ops.identify(hw);
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ case ixgbe_phy_cu_unknown:
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+ if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+ goto out;
+ default:
+ break;
+ }
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_AN:
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+ IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+ goto out;
+ } else
+ /* SFI mode so read SFP module */
+ goto sfp_check;
+ break;
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+ else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
+ goto out;
+ break;
+ case IXGBE_AUTOC_LMS_10G_SERIAL:
+ if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+ goto out;
+ } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+ goto sfp_check;
+ break;
+ case IXGBE_AUTOC_LMS_KX4_KX_KR:
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+ goto out;
+ break;
+ default:
+ goto out;
+ break;
+ }
+
+sfp_check:
+ /* SFP check must be done last since DA modules are sometimes used to
+ * test KR mode - we need to id KR mode correctly before SFP module.
+ * Call identify_sfp because the pluggable module may have changed */
+ physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
+out:
+ return physical_layer;
+}
+
+/**
+ * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit for 82599
+ **/
+s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
+{
+
+ DEBUGFUNC("ixgbe_enable_rx_dma_82599");
+
+ /*
+ * Workaround for 82599 silicon errata when enabling the Rx datapath.
+ * If traffic is incoming before we enable the Rx unit, it could hang
+ * the Rx DMA unit. Therefore, make sure the security engine is
+ * completely disabled prior to enabling the Rx unit.
+ */
+
+ hw->mac.ops.disable_sec_rx_path(hw);
+
+ if (regval & IXGBE_RXCTRL_RXEN)
+ ixgbe_enable_rx(hw);
+ else
+ ixgbe_disable_rx(hw);
+
+ hw->mac.ops.enable_sec_rx_path(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_verify_fw_version_82599 - verify FW version for 82599
+ * @hw: pointer to hardware structure
+ *
+ * Verifies that installed the firmware version is 0.6 or higher
+ * for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ * if the FW version is not supported.
+ **/
+STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM_VERSION;
+ u16 fw_offset, fw_ptp_cfg_offset;
+ u16 fw_version;
+
+ DEBUGFUNC("ixgbe_verify_fw_version_82599");
+
+ /* firmware check is only necessary for SFI devices */
+ if (hw->phy.media_type != ixgbe_media_type_fiber) {
+ status = IXGBE_SUCCESS;
+ goto fw_version_out;
+ }
+
+ /* get the offset to the Firmware Module block */
+ if (hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", IXGBE_FW_PTR);
+ return IXGBE_ERR_EEPROM_VERSION;
+ }
+
+ if ((fw_offset == 0) || (fw_offset == 0xFFFF))
+ goto fw_version_out;
+
+ /* get the offset to the Pass Through Patch Configuration block */
+ if (hw->eeprom.ops.read(hw, (fw_offset +
+ IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+ &fw_ptp_cfg_offset)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ fw_offset +
+ IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR);
+ return IXGBE_ERR_EEPROM_VERSION;
+ }
+
+ if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
+ goto fw_version_out;
+
+ /* get the firmware version */
+ if (hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+ IXGBE_FW_PATCH_VERSION_4), &fw_version)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4);
+ return IXGBE_ERR_EEPROM_VERSION;
+ }
+
+ if (fw_version > 0x5)
+ status = IXGBE_SUCCESS;
+
+fw_version_out:
+ return status;
+}
+
+/**
+ * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
+ * @hw: pointer to hardware structure
+ *
+ * Returns true if the LESM FW module is present and enabled. Otherwise
+ * returns false. Smart Speed must be disabled if LESM FW module is enabled.
+ **/
+bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+{
+ bool lesm_enabled = false;
+ u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
+ s32 status;
+
+ DEBUGFUNC("ixgbe_verify_lesm_fw_enabled_82599");
+
+ /* get the offset to the Firmware Module block */
+ status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+ if ((status != IXGBE_SUCCESS) ||
+ (fw_offset == 0) || (fw_offset == 0xFFFF))
+ goto out;
+
+ /* get the offset to the LESM Parameters block */
+ status = hw->eeprom.ops.read(hw, (fw_offset +
+ IXGBE_FW_LESM_PARAMETERS_PTR),
+ &fw_lesm_param_offset);
+
+ if ((status != IXGBE_SUCCESS) ||
+ (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
+ goto out;
+
+ /* get the LESM state word */
+ status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
+ IXGBE_FW_LESM_STATE_1),
+ &fw_lesm_state);
+
+ if ((status == IXGBE_SUCCESS) &&
+ (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
+ lesm_enabled = true;
+
+out:
+ return lesm_enabled;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Retrieves 16 bit word(s) read from EEPROM
+ **/
+STATIC s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ DEBUGFUNC("ixgbe_read_eeprom_buffer_82599");
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
+ data);
+ else
+ ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
+ words,
+ data);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_eeprom_82599 - Read EEPROM word using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM
+ **/
+STATIC s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+ u16 offset, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ DEBUGFUNC("ixgbe_read_eeprom_82599");
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+ else
+ ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_reset_pipeline_82599 - perform pipeline reset
+ *
+ * @hw: pointer to hardware structure
+ *
+ * Reset pipeline by asserting Restart_AN together with LMS change to ensure
+ * full pipeline reset. This function assumes the SW/FW lock is held.
+ **/
+s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val;
+ u32 anlp1_reg = 0;
+ u32 i, autoc_reg, autoc2_reg;
+
+ /* Enable link if disabled in NVM */
+ autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+ autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ /* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+ autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
+ /* Wait for AN to leave state 0 */
+ for (i = 0; i < 10; i++) {
+ msec_delay(4);
+ anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+ if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
+ break;
+ }
+
+ if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
+ DEBUGOUT("auto negotiation not completed\n");
+ ret_val = IXGBE_ERR_RESET_FAILED;
+ goto reset_pipeline_out;
+ }
+
+ ret_val = IXGBE_SUCCESS;
+
+reset_pipeline_out:
+ /* Write AUTOC register with original LMS field and Restart_AN */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ DEBUGFUNC("ixgbe_read_i2c_byte_82599");
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ msec_delay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource,"
+ " acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ DEBUGFUNC("ixgbe_write_i2c_byte_82599");
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ msec_delay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource,"
+ " acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+
+ if (hw->phy.qsfp_shared_i2c_bus == TRUE) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
new file mode 100644
@@ -0,0 +1,64 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_82599_H_
+#define _IXGBE_82599_H_
+
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *autoneg);
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw);
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed);
+s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw);
+void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw);
+s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval);
+s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val);
+s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 reg_val, bool locked);
+#endif /* _IXGBE_82599_H_ */
new file mode 100644
@@ -0,0 +1,1643 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+
+#define IXGBE_EMPTY_PARAM
+
+static const u32 ixgbe_mvals_base[IXGBE_MVALS_IDX_LIMIT] = {
+ IXGBE_MVALS_INIT(IXGBE_EMPTY_PARAM)
+};
+
+static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = {
+ IXGBE_MVALS_INIT(_X540)
+};
+
+static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
+ IXGBE_MVALS_INIT(_X550)
+};
+
+static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = {
+ IXGBE_MVALS_INIT(_X550EM_x)
+};
+
+/**
+ * ixgbe_dcb_get_rtrup2tc - read rtrup2tc reg
+ * @hw: pointer to hardware structure
+ * @map: pointer to u8 arr for returning map
+ *
+ * Read the rtrup2tc HW register and resolve its content into map
+ **/
+void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map)
+{
+ if (hw->mac.ops.get_rtrup2tc)
+ hw->mac.ops.get_rtrup2tc(hw, map);
+}
+
+/**
+ * ixgbe_init_shared_code - Initialize the shared code
+ * @hw: pointer to hardware structure
+ *
+ * This will assign function pointers and assign the MAC type and PHY code.
+ * Does not touch the hardware. This function must be called prior to any
+ * other function in the shared code. The ixgbe_hw structure should be
+ * memset to 0 prior to calling this function. The following fields in
+ * hw structure should be filled in prior to calling this function:
+ * hw_addr, back, device_id, vendor_id, subsystem_device_id,
+ * subsystem_vendor_id, and revision_id
+ **/
+s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_init_shared_code");
+
+ /*
+ * Set the mac type
+ */
+ ixgbe_set_mac_type(hw);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ status = ixgbe_init_ops_82598(hw);
+ break;
+ case ixgbe_mac_82599EB:
+ status = ixgbe_init_ops_82599(hw);
+ break;
+ case ixgbe_mac_X540:
+ status = ixgbe_init_ops_X540(hw);
+ break;
+ case ixgbe_mac_X550:
+ status = ixgbe_init_ops_X550(hw);
+ break;
+ case ixgbe_mac_X550EM_x:
+ status = ixgbe_init_ops_X550EM(hw);
+ break;
+ case ixgbe_mac_82599_vf:
+ case ixgbe_mac_X540_vf:
+ case ixgbe_mac_X550_vf:
+ case ixgbe_mac_X550EM_x_vf:
+ status = ixgbe_init_ops_vf(hw);
+ break;
+ default:
+ status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+ break;
+ }
+ hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME;
+
+ return status;
+}
+
+/**
+ * ixgbe_set_mac_type - Sets MAC type
+ * @hw: pointer to the HW structure
+ *
+ * This function sets the mac type of the adapter based on the
+ * vendor ID and device ID stored in the hw structure.
+ **/
+s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_set_mac_type\n");
+
+ if (hw->vendor_id != IXGBE_INTEL_VENDOR_ID) {
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Unsupported vendor id: %x", hw->vendor_id);
+ return IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+ }
+
+ hw->mvals = ixgbe_mvals_base;
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598:
+ case IXGBE_DEV_ID_82598_BX:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AT:
+ case IXGBE_DEV_ID_82598AT2:
+ case IXGBE_DEV_ID_82598EB_CX4:
+ case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ case IXGBE_DEV_ID_82598EB_SFP_LOM:
+ hw->mac.type = ixgbe_mac_82598EB;
+ break;
+ case IXGBE_DEV_ID_82599_KX4:
+ case IXGBE_DEV_ID_82599_KX4_MEZZ:
+ case IXGBE_DEV_ID_82599_XAUI_LOM:
+ case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+ case IXGBE_DEV_ID_82599_KR:
+ case IXGBE_DEV_ID_82599_SFP:
+ case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+ case IXGBE_DEV_ID_82599_SFP_FCOE:
+ case IXGBE_DEV_ID_82599_SFP_EM:
+ case IXGBE_DEV_ID_82599_SFP_SF2:
+ case IXGBE_DEV_ID_82599_SFP_SF_QP:
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ case IXGBE_DEV_ID_82599EN_SFP:
+ case IXGBE_DEV_ID_82599_CX4:
+ case IXGBE_DEV_ID_82599_LS:
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ hw->mac.type = ixgbe_mac_82599EB;
+ break;
+ case IXGBE_DEV_ID_82599_VF:
+ case IXGBE_DEV_ID_82599_VF_HV:
+ hw->mac.type = ixgbe_mac_82599_vf;
+ break;
+ case IXGBE_DEV_ID_X540_VF:
+ case IXGBE_DEV_ID_X540_VF_HV:
+ hw->mac.type = ixgbe_mac_X540_vf;
+ hw->mvals = ixgbe_mvals_X540;
+ break;
+ case IXGBE_DEV_ID_X540T:
+ case IXGBE_DEV_ID_X540T1:
+ hw->mac.type = ixgbe_mac_X540;
+ hw->mvals = ixgbe_mvals_X540;
+ break;
+ case IXGBE_DEV_ID_X550T:
+ hw->mac.type = ixgbe_mac_X550;
+ hw->mvals = ixgbe_mvals_X550;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_KX4:
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ case IXGBE_DEV_ID_X550EM_X_SFP:
+ hw->mac.type = ixgbe_mac_X550EM_x;
+ hw->mvals = ixgbe_mvals_X550EM_x;
+ break;
+ case IXGBE_DEV_ID_X550_VF:
+ case IXGBE_DEV_ID_X550_VF_HV:
+ hw->mac.type = ixgbe_mac_X550_vf;
+ hw->mvals = ixgbe_mvals_X550;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_VF:
+ case IXGBE_DEV_ID_X550EM_X_VF_HV:
+ hw->mac.type = ixgbe_mac_X550EM_x_vf;
+ hw->mvals = ixgbe_mvals_X550EM_x;
+ break;
+ default:
+ ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Unsupported device id: %x",
+ hw->device_id);
+ break;
+ }
+
+ DEBUGOUT2("ixgbe_set_mac_type found mac: %d, returns: %d\n",
+ hw->mac.type, ret_val);
+ return ret_val;
+}
+
+/**
+ * ixgbe_init_hw - Initialize the hardware
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting and then starting the hardware
+ **/
+s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_reset_hw - Performs a hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks and
+ * clears all interrupts, performs a PHY reset, and performs a MAC reset
+ **/
+s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_start_hw - Prepares hardware for Rx/Tx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type,
+ * clears all on chip counters, initializes receive address registers,
+ * multicast table, VLAN filter table, calls routine to setup link and
+ * flow control settings, and leaves transmit and receive units disabled
+ * and uninitialized.
+ **/
+s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering,
+ * which is disabled by default in ixgbe_start_hw();
+ *
+ * @hw: pointer to hardware structure
+ *
+ * Enable relaxed ordering;
+ **/
+void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.enable_relaxed_ordering)
+ hw->mac.ops.enable_relaxed_ordering(hw);
+}
+
+/**
+ * ixgbe_clear_hw_cntrs - Clear hardware counters
+ * @hw: pointer to hardware structure
+ *
+ * Clears all hardware statistics counters by reading them from the hardware
+ * Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_media_type - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw),
+ ixgbe_media_type_unknown);
+}
+
+/**
+ * ixgbe_get_mac_addr - Get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
+ *
+ * Reads the adapter's MAC address from the first Receive Address Register
+ * (RAR0) A reset of the adapter must have been performed prior to calling
+ * this function in order for the MAC address to have been loaded from the
+ * EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr,
+ (hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_san_mac_addr - Get SAN MAC address
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
+ *
+ * Reads the SAN MAC address from the EEPROM, if it's available. This is
+ * per-port, so set_lan_id() must be called before reading the addresses.
+ **/
+s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr,
+ (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_san_mac_addr - Write a SAN MAC address
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
+ *
+ * Writes A SAN MAC address to the EEPROM.
+ **/
+s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr,
+ (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_device_caps - Get additional device capabilities
+ * @hw: pointer to hardware structure
+ * @device_caps: the EEPROM word for device capabilities
+ *
+ * Reads the extra device capabilities from the EEPROM
+ **/
+s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_device_caps,
+ (hw, device_caps), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
+ * @hw: pointer to hardware structure
+ * @wwnn_prefix: the alternative WWNN prefix
+ * @wwpn_prefix: the alternative WWPN prefix
+ *
+ * This function will read the EEPROM from the alternative SAN MAC address
+ * block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+ u16 *wwpn_prefix)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix,
+ (hw, wwnn_prefix, wwpn_prefix),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM
+ * @hw: pointer to hardware structure
+ * @bs: the fcoe boot status
+ *
+ * This function will read the FCOE boot status from the iSCSI FCOE block
+ **/
+s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status,
+ (hw, bs),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_bus_info - Set PCI bus info
+ * @hw: pointer to hardware structure
+ *
+ * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_num_of_tx_queues - Get Tx queues
+ * @hw: pointer to hardware structure
+ *
+ * Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
+{
+ return hw->mac.max_tx_queues;
+}
+
+/**
+ * ixgbe_get_num_of_rx_queues - Get Rx queues
+ * @hw: pointer to hardware structure
+ *
+ * Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
+{
+ return hw->mac.max_rx_queues;
+}
+
+/**
+ * ixgbe_stop_adapter - Disable Rx/Tx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_pba_string - Reads part number string from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number string from the EEPROM
+ * @pba_num_size: part number string buffer length
+ *
+ * Reads the part number string from the EEPROM.
+ **/
+s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
+{
+ return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size);
+}
+
+/**
+ * ixgbe_read_pba_num - Reads part number from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number from the EEPROM
+ *
+ * Reads the part number from the EEPROM.
+ **/
+s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num)
+{
+ return ixgbe_read_pba_num_generic(hw, pba_num);
+}
+
+/**
+ * ixgbe_identify_phy - Get PHY type
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_phy - Perform a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS)
+ status = IXGBE_ERR_PHY;
+ }
+
+ if (status == IXGBE_SUCCESS) {
+ status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version -
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to firmware version
+ **/
+s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version,
+ (hw, firmware_version),
+ IXGBE_NOT_IMPLEMENTED);
+ return status;
+}
+
+/**
+ * ixgbe_read_phy_reg - Read PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ *
+ * Reads a value from a specified PHY register
+ **/
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data)
+{
+ if (hw->phy.id == 0)
+ ixgbe_identify_phy(hw);
+
+ return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr,
+ device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_phy_reg - Write PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @phy_data: Data to write to the PHY register
+ *
+ * Writes a value to specified PHY register
+ **/
+s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 phy_data)
+{
+ if (hw->phy.id == 0)
+ ixgbe_identify_phy(hw);
+
+ return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr,
+ device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_phy_link - Restart PHY autoneg
+ * @hw: pointer to hardware structure
+ *
+ * Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_internal_phy - Configure integrated PHY
+ * @hw: pointer to hardware structure
+ *
+ * Reconfigure the integrated PHY in order to enable talk to the external PHY.
+ * Returns success if not implemented, since nothing needs to be done in this
+ * case.
+ */
+s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.setup_internal_link, (hw),
+ IXGBE_SUCCESS);
+}
+
+/**
+ * ixgbe_check_phy_link - Determine link and speed status
+ * @hw: pointer to hardware structure
+ *
+ * Reads a PHY register to determine if link is up and the current speed for
+ * the PHY.
+ **/
+s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed,
+ link_up), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_phy_link_speed - Set auto advertise
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ *
+ * Sets the auto advertised capabilities
+ **/
+s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed,
+ autoneg_wait_to_complete),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_phy_power - Control the phy power state
+ * @hw: pointer to hardware structure
+ * @on: true for on, false for off
+ */
+s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.set_phy_power, (hw, on),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_check_link - Get link and speed status
+ * @hw: pointer to hardware structure
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed,
+ link_up, link_up_wait_to_complete),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_disable_tx_laser - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * If the driver needs to disable the laser on SFI optics.
+ **/
+void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.disable_tx_laser)
+ hw->mac.ops.disable_tx_laser(hw);
+}
+
+/**
+ * ixgbe_enable_tx_laser - Enable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * If the driver needs to enable the laser on SFI optics.
+ **/
+void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.enable_tx_laser)
+ hw->mac.ops.enable_tx_laser(hw);
+}
+
+/**
+ * ixgbe_flap_tx_laser - flap Tx laser to start autotry process
+ * @hw: pointer to hardware structure
+ *
+ * When the driver changes the link speeds that it can support then
+ * flap the tx laser to alert the link partner to start autotry
+ * process on its end.
+ **/
+void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.flap_tx_laser)
+ hw->mac.ops.flap_tx_laser(hw);
+}
+
+/**
+ * ixgbe_setup_link - Set link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ *
+ * Configures link settings. Restarts the link.
+ * Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed,
+ autoneg_wait_to_complete),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_mac_link - Set link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ *
+ * Configures link settings. Restarts the link.
+ * Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.setup_mac_link, (hw, speed,
+ autoneg_wait_to_complete),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_link_capabilities - Returns link capabilities
+ * @hw: pointer to hardware structure
+ *
+ * Determines the link capabilities of the current configuration.
+ **/
+s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw,
+ speed, autoneg), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_led_on - Turn on LEDs
+ * @hw: pointer to hardware structure
+ * @index: led number to turn on
+ *
+ * Turns on the software controllable LEDs.
+ **/
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_led_off - Turn off LEDs
+ * @hw: pointer to hardware structure
+ * @index: led number to turn off
+ *
+ * Turns off the software controllable LEDs.
+ **/
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_blink_led_start - Blink LEDs
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Blink LED based on index.
+ **/
+s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_blink_led_stop - Stop blinking LEDs
+ * @hw: pointer to hardware structure
+ *
+ * Stop blinking LED based on index.
+ **/
+s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_init_eeprom_params - Initialize EEPROM parameters
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+
+/**
+ * ixgbe_write_eeprom - Write word to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
+ * called after this function, the EEPROM will most likely contain an
+ * invalid checksum.
+ **/
+s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word(s) to be written to the EEPROM
+ * @words: number of words
+ *
+ * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
+ * called after this function, the EEPROM will most likely contain an
+ * invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer,
+ (hw, offset, words, data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_eeprom - Read word from EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
+ *
+ * Reads 16 bit value from EEPROM
+ **/
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit word(s) from EEPROM
+ * @words: number of words
+ *
+ * Reads 16 bit word(s) from EEPROM
+ **/
+s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer,
+ (hw, offset, words, data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum
+ **/
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+ return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum,
+ (hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_insert_mac_addr - Find a RAR for this mac address
+ * @hw: pointer to hardware structure
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq pool to assign
+ *
+ * Puts an ethernet address into a receive address register, or
+ * finds the rar that it is aleady in; adds to the pool list
+ **/
+s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr,
+ (hw, addr, vmdq),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_rar - Set Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set"
+ * @enable_addr: set flag that address is active
+ *
+ * Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq,
+ enable_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_clear_rar - Clear Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ *
+ * Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_vmdq - Associate a VMDq index with a receive address
+ * @hw: pointer to hardware structure
+ * @rar: receive address register index to associate with VMDq index
+ * @vmdq: VMDq set or pool index
+ **/
+s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq),
+ IXGBE_NOT_IMPLEMENTED);
+
+}
+
+/**
+ * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
+ * @hw: pointer to hardware structure
+ * @vmdq: VMDq default pool index
+ **/
+s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac,
+ (hw, vmdq), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
+ * @hw: pointer to hardware structure
+ * @rar: receive address register index to disassociate with VMDq index
+ * @vmdq: VMDq set or pool index
+ **/
+s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_init_rx_addrs - Initializes receive address filters.
+ * @hw: pointer to hardware structure
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
+ * @hw: pointer to hardware structure
+ **/
+u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
+{
+ return hw->mac.num_rar_entries;
+}
+
+/**
+ * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
+ * @hw: pointer to hardware structure
+ * @addr_list: the list of new multicast addresses
+ * @addr_count: number of addresses
+ * @func: iterator function to walk the multicast address list
+ *
+ * The given list replaces any existing list. Clears the secondary addrs from
+ * receive address registers. Uses unused receive address registers for the
+ * first secondary addresses, and falls back to promiscuous mode as needed.
+ **/
+s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+ u32 addr_count, ixgbe_mc_addr_itr func)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw,
+ addr_list, addr_count, func),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
+ * @hw: pointer to hardware structure
+ * @mc_addr_list: the list of new multicast addresses
+ * @mc_addr_count: number of addresses
+ * @func: iterator function to walk the multicast address list
+ *
+ * The given list replaces any existing list. Clears the MC addrs from receive
+ * address registers and the multicast table. Uses unused receive address
+ * registers for the first multicast addresses, and hashes the rest into the
+ * multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, ixgbe_mc_addr_itr func,
+ bool clear)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw,
+ mc_addr_list, mc_addr_count, func, clear),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_enable_mc - Enable multicast address in RAR
+ * @hw: pointer to hardware structure
+ *
+ * Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_disable_mc - Disable multicast address in RAR
+ * @hw: pointer to hardware structure
+ *
+ * Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_clear_vfta - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_vfta - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFTA
+ * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
+ vlan_on), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_vlvf - Set VLAN Pool Filter
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ * @vfta_changed: pointer to boolean flag which indicates whether VFTA
+ * should be changed
+ *
+ * Turn on/off specified bit in VLVF table.
+ **/
+s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
+ bool *vfta_changed)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
+ vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_fc_enable - Enable flow control
+ * @hw: pointer to hardware structure
+ *
+ * Configures the flow control settings based on SW configuration.
+ **/
+s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_fc - Set up flow control
+ * @hw: pointer to hardware structure
+ *
+ * Called at init time to set up flow control.
+ **/
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.setup_fc, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_fw_drv_ver - Try to send the driver version number FW
+ * @hw: pointer to hardware structure
+ * @maj: driver major number to be sent to firmware
+ * @min: driver minor number to be sent to firmware
+ * @build: driver build number to be sent to firmware
+ * @ver: driver version number to be sent to firmware
+ **/
+s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
+ u8 ver)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
+ build, ver), IXGBE_NOT_IMPLEMENTED);
+}
+
+
+/**
+ * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ *
+ * Updates the temperatures in mac.thermal_sensor_data
+ **/
+s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ **/
+s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_dmac_config - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing. If enabling dmac, dmac is activated.
+ * When disabling dmac, dmac enable dmac bit is cleared.
+ **/
+s32 ixgbe_dmac_config(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
+ *
+ * Disables dmac, updates per TC settings, and then enable dmac.
+ **/
+s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing threshold per TC and set high priority bit for
+ * FCOE TC. The dmac enable bit must be cleared before configuring.
+ **/
+s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_eee - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @enable_eee: boolean flag to enable EEE
+ *
+ * Enable/disable EEE based on enable_ee flag.
+ * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ * are modified.
+ *
+ **/
+s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_source_address_pruning - Enable/Disable source address pruning
+ * @hw: pointer to hardware structure
+ * @enbale: enable or disable source address pruning
+ * @pool: Rx pool - Rx pool to toggle source address pruning
+ **/
+void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
+ unsigned int pool)
+{
+ if (hw->mac.ops.set_source_address_pruning)
+ hw->mac.ops.set_source_address_pruning(hw, enable, pool);
+}
+
+/**
+ * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for Ethertype anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ *
+ **/
+void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+ if (hw->mac.ops.set_ethertype_anti_spoofing)
+ hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf);
+}
+
+/**
+ * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Pointer to read data from PHY register
+ *
+ * Reads a value from a specified PHY register
+ **/
+s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *phy_data)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr,
+ device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Data to write to the PHY register
+ *
+ * Writes a value to specified PHY register
+ **/
+s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 phy_data)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr,
+ device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_disable_mdd - Disable malicious driver detection
+ * @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_disable_mdd(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.disable_mdd)
+ hw->mac.ops.disable_mdd(hw);
+}
+
+/**
+ * ixgbe_enable_mdd - Enable malicious driver detection
+ * @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_enable_mdd(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.enable_mdd)
+ hw->mac.ops.enable_mdd(hw);
+}
+
+/**
+ * ixgbe_mdd_event - Handle malicious driver detection event
+ * @hw: pointer to hardware structure
+ * @vf_bitmap: vf bitmap of malicious vfs
+ *
+ **/
+void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap)
+{
+ if (hw->mac.ops.mdd_event)
+ hw->mac.ops.mdd_event(hw, vf_bitmap);
+}
+
+/**
+ * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
+ * detection event
+ * @hw: pointer to hardware structure
+ * @vf: vf index
+ *
+ **/
+void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf)
+{
+ if (hw->mac.ops.restore_mdd_vf)
+ hw->mac.ops.restore_mdd_vf(hw, vf);
+}
+
+/**
+ * ixgbe_enter_lplu - Transition to low power states
+ * @hw: pointer to hardware structure
+ *
+ * Configures Low Power Link Up on transition to low power states
+ * (from D0 to non-D0).
+ **/
+s32 ixgbe_enter_lplu(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.enter_lplu, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_handle_lasi - Handle external Base T PHY interrupt
+ * @hw: pointer to hardware structure
+ *
+ * Handle external Base T PHY interrupt. If high temperature
+ * failure alarm then return error, else if link status change
+ * then setup internal/external PHY link
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+s32 ixgbe_handle_lasi(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.handle_lasi, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_analog_reg8 - Reads 8 bit analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs write operation to analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg,
+ val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_analog_reg8 - Writes 8 bit analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to write
+ * @val: value to write
+ *
+ * Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg,
+ val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the Unicast Table Arrays to zero on device load. This
+ * is part of the Rx init addr execution path.
+ **/
+s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: I2C bus address to read from
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 *data)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset,
+ dev_addr, data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: I2C bus address to read from
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte_unlocked,
+ (hw, byte_offset, dev_addr, data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_i2c_combined - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_read_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.read_i2c_combined, (hw, addr,
+ reg, val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_i2c_combined_unlocked - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+s32 ixgbe_read_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 *val)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.read_i2c_combined_unlocked,
+ (hw, addr, reg, val),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_i2c_byte - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: I2C bus address to write to
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface
+ * at a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 data)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset,
+ dev_addr, data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: I2C bus address to write to
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface
+ * at a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte_unlocked,
+ (hw, byte_offset, dev_addr, data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_i2c_combined - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_write_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.write_i2c_combined, (hw, addr,
+ reg, val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_i2c_combined_unlocked - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+s32 ixgbe_write_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 val)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.write_i2c_combined_unlocked,
+ (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
+ u8 byte_offset, u8 eeprom_data)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom,
+ (hw, byte_offset, eeprom_data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
+{
+ return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom,
+ (hw, byte_offset, eeprom_data),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_get_supported_physical_layer - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
+ (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
+}
+
+/**
+ * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
+ * @hw: pointer to hardware structure
+ * @regval: bitfield to write to the Rx DMA register
+ *
+ * Enables the Rx DMA unit of the device.
+ **/
+s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma,
+ (hw, regval), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_disable_sec_rx_path - Stops the receive data path
+ * @hw: pointer to hardware structure
+ *
+ * Stops the receive data path.
+ **/
+s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path,
+ (hw), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_enable_sec_rx_path - Enables the receive data path
+ * @hw: pointer to hardware structure
+ *
+ * Enables the receive data path.
+ **/
+s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path,
+ (hw), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync,
+ (hw, mask), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_release_swfw_semaphore - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through SW_FW_SYNC register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
+{
+ if (hw->mac.ops.release_swfw_sync)
+ hw->mac.ops.release_swfw_sync(hw, mask);
+}
+
+
+void ixgbe_disable_rx(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.disable_rx)
+ hw->mac.ops.disable_rx(hw);
+}
+
+void ixgbe_enable_rx(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.enable_rx)
+ hw->mac.ops.enable_rx(hw);
+}
+
+/**
+ * ixgbe_set_rate_select_speed - Set module link speed
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
+ *
+ * Set module link speed via the rate select.
+ */
+void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
+{
+ if (hw->mac.ops.set_rate_select_speed)
+ hw->mac.ops.set_rate_select_speed(hw, speed);
+}
new file mode 100644
@@ -0,0 +1,220 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_API_H_
+#define _IXGBE_API_H_
+
+#include "ixgbe_type.h"
+
+void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map);
+
+s32 ixgbe_init_shared_code(struct ixgbe_hw *hw);
+
+extern s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw);
+
+s32 ixgbe_set_mac_type(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw(struct ixgbe_hw *hw);
+void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
+enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw);
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw);
+s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num);
+s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size);
+
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data);
+s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 phy_data);
+
+s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw);
+s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw);
+s32 ixgbe_check_phy_link(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up);
+s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_set_phy_power(struct ixgbe_hw *, bool on);
+void ixgbe_disable_tx_laser(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser(struct ixgbe_hw *hw);
+void ixgbe_flap_tx_laser(struct ixgbe_hw *hw);
+s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *autoneg);
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw);
+
+s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq);
+s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw);
+s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+ u32 addr_count, ixgbe_mc_addr_itr func);
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, ixgbe_mc_addr_itr func,
+ bool clear);
+void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr_list, u32 vmdq);
+s32 ixgbe_enable_mc(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc(struct ixgbe_hw *hw);
+s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan,
+ u32 vind, bool vlan_on);
+s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on, bool *vfta_changed);
+s32 ixgbe_fc_enable(struct ixgbe_hw *hw);
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw);
+s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
+ u8 ver);
+s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw);
+void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr);
+s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw,
+ u16 *firmware_version);
+s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data);
+u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval);
+s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw);
+s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw);
+s32 ixgbe_mng_fw_enabled(struct ixgbe_hw *hw);
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl);
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
+ bool cloud_mode);
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common,
+ u8 queue);
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input_mask, bool cloud_mode);
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id, u8 queue, bool cloud_mode);
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id);
+s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ union ixgbe_atr_input *mask,
+ u16 soft_id,
+ u8 queue,
+ bool cloud_mode);
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+ union ixgbe_atr_input *mask);
+u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common);
+bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 *data);
+s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+s32 ixgbe_read_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val);
+s32 ixgbe_read_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 *val);
+s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 data);
+s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
+s32 ixgbe_write_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val);
+s32 ixgbe_write_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 val);
+s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data);
+s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps);
+s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+ u16 *wwpn_prefix);
+s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs);
+s32 ixgbe_dmac_config(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw);
+s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee);
+void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
+ unsigned int vf);
+void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable,
+ int vf);
+s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *phy_data);
+s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 phy_data);
+void ixgbe_disable_mdd(struct ixgbe_hw *hw);
+void ixgbe_enable_mdd(struct ixgbe_hw *hw);
+void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap);
+void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf);
+s32 ixgbe_enter_lplu(struct ixgbe_hw *hw);
+s32 ixgbe_handle_lasi(struct ixgbe_hw *hw);
+void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed);
+void ixgbe_disable_rx(struct ixgbe_hw *hw);
+void ixgbe_enable_rx(struct ixgbe_hw *hw);
+
+#endif /* _IXGBE_API_H_ */
new file mode 100644
@@ -0,0 +1,5143 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82599.h"
+#include "ixgbe_api.h"
+
+STATIC s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
+STATIC void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+STATIC void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count);
+STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+STATIC void ixgbe_release_eeprom(struct ixgbe_hw *hw);
+
+STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
+STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
+ u16 *san_mac_offset);
+STATIC s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+STATIC s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset);
+
+/**
+ * ixgbe_init_ops_generic - Inits function ptrs
+ * @hw: pointer to the hardware structure
+ *
+ * Initialize the function pointers.
+ **/
+s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ struct ixgbe_mac_info *mac = &hw->mac;
+ u32 eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ DEBUGFUNC("ixgbe_init_ops_generic");
+
+ /* EEPROM */
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_generic;
+ /* If EEPROM is valid (bit 8 = 1), use EERD otherwise use bit bang */
+ if (eec & IXGBE_EEC_PRES) {
+ eeprom->ops.read = ixgbe_read_eerd_generic;
+ eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_generic;
+ } else {
+ eeprom->ops.read = ixgbe_read_eeprom_bit_bang_generic;
+ eeprom->ops.read_buffer =
+ ixgbe_read_eeprom_buffer_bit_bang_generic;
+ }
+ eeprom->ops.write = ixgbe_write_eeprom_generic;
+ eeprom->ops.write_buffer = ixgbe_write_eeprom_buffer_bit_bang_generic;
+ eeprom->ops.validate_checksum =
+ ixgbe_validate_eeprom_checksum_generic;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_generic;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_generic;
+
+ /* MAC */
+ mac->ops.init_hw = ixgbe_init_hw_generic;
+ mac->ops.reset_hw = NULL;
+ mac->ops.start_hw = ixgbe_start_hw_generic;
+ mac->ops.clear_hw_cntrs = ixgbe_clear_hw_cntrs_generic;
+ mac->ops.get_media_type = NULL;
+ mac->ops.get_supported_physical_layer = NULL;
+ mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_generic;
+ mac->ops.get_mac_addr = ixgbe_get_mac_addr_generic;
+ mac->ops.stop_adapter = ixgbe_stop_adapter_generic;
+ mac->ops.get_bus_info = ixgbe_get_bus_info_generic;
+ mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie;
+ mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync;
+ mac->ops.release_swfw_sync = ixgbe_release_swfw_sync;
+ mac->ops.prot_autoc_read = prot_autoc_read_generic;
+ mac->ops.prot_autoc_write = prot_autoc_write_generic;
+
+ /* LEDs */
+ mac->ops.led_on = ixgbe_led_on_generic;
+ mac->ops.led_off = ixgbe_led_off_generic;
+ mac->ops.blink_led_start = ixgbe_blink_led_start_generic;
+ mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic;
+
+ /* RAR, Multicast, VLAN */
+ mac->ops.set_rar = ixgbe_set_rar_generic;
+ mac->ops.clear_rar = ixgbe_clear_rar_generic;
+ mac->ops.insert_mac_addr = NULL;
+ mac->ops.set_vmdq = NULL;
+ mac->ops.clear_vmdq = NULL;
+ mac->ops.init_rx_addrs = ixgbe_init_rx_addrs_generic;
+ mac->ops.update_uc_addr_list = ixgbe_update_uc_addr_list_generic;
+ mac->ops.update_mc_addr_list = ixgbe_update_mc_addr_list_generic;
+ mac->ops.enable_mc = ixgbe_enable_mc_generic;
+ mac->ops.disable_mc = ixgbe_disable_mc_generic;
+ mac->ops.clear_vfta = NULL;
+ mac->ops.set_vfta = NULL;
+ mac->ops.set_vlvf = NULL;
+ mac->ops.init_uta_tables = NULL;
+ mac->ops.enable_rx = ixgbe_enable_rx_generic;
+ mac->ops.disable_rx = ixgbe_disable_rx_generic;
+
+ /* Flow Control */
+ mac->ops.fc_enable = ixgbe_fc_enable_generic;
+ mac->ops.setup_fc = ixgbe_setup_fc_generic;
+
+ /* Link */
+ mac->ops.get_link_capabilities = NULL;
+ mac->ops.setup_link = NULL;
+ mac->ops.check_link = NULL;
+ mac->ops.dmac_config = NULL;
+ mac->ops.dmac_update_tcs = NULL;
+ mac->ops.dmac_config_tcs = NULL;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_device_supports_autoneg_fc - Check if device supports autonegotiation
+ * of flow control
+ * @hw: pointer to hardware structure
+ *
+ * This function returns true if the device supports flow control
+ * autonegotiation, and false if it does not.
+ *
+ **/
+bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
+{
+ bool supported = false;
+ ixgbe_link_speed speed;
+ bool link_up;
+
+ DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
+
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber_qsfp:
+ case ixgbe_media_type_fiber:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ true : false;
+ else
+ supported = true;
+ break;
+ case ixgbe_media_type_backplane:
+ supported = true;
+ break;
+ case ixgbe_media_type_copper:
+ /* only some copper devices support flow control autoneg */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ case IXGBE_DEV_ID_X540T:
+ case IXGBE_DEV_ID_X540T1:
+ case IXGBE_DEV_ID_X550T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ supported = true;
+ break;
+ default:
+ supported = false;
+ }
+ default:
+ break;
+ }
+
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Device %x does not support flow control autoneg",
+ hw->device_id);
+ return supported;
+}
+
+/**
+ * ixgbe_setup_fc_generic - Set up flow control
+ * @hw: pointer to hardware structure
+ *
+ * Called at init time to set up flow control.
+ **/
+s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 reg = 0, reg_bp = 0;
+ u16 reg_cu = 0;
+ bool locked = false;
+
+ DEBUGFUNC("ixgbe_setup_fc_generic");
+
+ /* Validate the requested mode */
+ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+ ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
+ "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /*
+ * 10gig parts do not have a word in the EEPROM to determine the
+ * default flow control setting, so we explicitly set it to full.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_default)
+ hw->fc.requested_mode = ixgbe_fc_full;
+
+ /*
+ * Set up the 1G and 10G flow control advertisement registers so the
+ * HW will be able to do fc autoneg once the cable is plugged in. If
+ * we link at 10G, the 1G advertisement is harmless and vice versa.
+ */
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_backplane:
+ /* some MAC's need RMW protection on AUTOC */
+ ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, ®_bp);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ /* only backplane uses autoc so fall though */
+ case ixgbe_media_type_fiber_qsfp:
+ case ixgbe_media_type_fiber:
+ reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+
+ break;
+ case ixgbe_media_type_copper:
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®_cu);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * The possible values of fc.requested_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_none:
+ /* Flow control completely disabled by software override. */
+ reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+ if (hw->phy.media_type == ixgbe_media_type_backplane)
+ reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE |
+ IXGBE_AUTOC_ASM_PAUSE);
+ else if (hw->phy.media_type == ixgbe_media_type_copper)
+ reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ reg |= IXGBE_PCS1GANA_ASM_PAUSE;
+ reg &= ~IXGBE_PCS1GANA_SYM_PAUSE;
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ reg_bp |= IXGBE_AUTOC_ASM_PAUSE;
+ reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE;
+ } else if (hw->phy.media_type == ixgbe_media_type_copper) {
+ reg_cu |= IXGBE_TAF_ASM_PAUSE;
+ reg_cu &= ~IXGBE_TAF_SYM_PAUSE;
+ }
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE, as such we fall
+ * through to the fc_full statement. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE;
+ if (hw->phy.media_type == ixgbe_media_type_backplane)
+ reg_bp |= IXGBE_AUTOC_SYM_PAUSE |
+ IXGBE_AUTOC_ASM_PAUSE;
+ else if (hw->phy.media_type == ixgbe_media_type_copper)
+ reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE;
+ break;
+ default:
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
+ "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ if (hw->mac.type < ixgbe_mac_X540) {
+ /*
+ * Enable auto-negotiation between the MAC & PHY;
+ * the MAC will advertise clause 37 flow control.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
+ reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+
+ /* Disable AN timeout */
+ if (hw->fc.strict_ieee)
+ reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
+ DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+ }
+
+ /*
+ * AUTOC restart handles negotiation of 1G and 10G on backplane
+ * and copper. There is no need to set the PCS1GCTL register.
+ *
+ */
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ reg_bp |= IXGBE_AUTOC_AN_RESTART;
+ ret_val = hw->mac.ops.prot_autoc_write(hw, reg_bp, locked);
+ if (ret_val)
+ goto out;
+ } else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
+ (ixgbe_device_supports_autoneg_fc(hw))) {
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg_cu);
+ }
+
+ DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
+{
+ s32 ret_val;
+ u32 ctrl_ext;
+
+ DEBUGFUNC("ixgbe_start_hw_generic");
+
+ /* Set the media type */
+ hw->phy.media_type = hw->mac.ops.get_media_type(hw);
+
+ /* PHY ops initialization must be done in reset_hw() */
+
+ /* Clear the VLAN filter table */
+ hw->mac.ops.clear_vfta(hw);
+
+ /* Clear statistics registers */
+ hw->mac.ops.clear_hw_cntrs(hw);
+
+ /* Set No Snoop Disable */
+ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Setup flow control */
+ ret_val = ixgbe_setup_fc(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_hw_gen2 - Init sequence for common device family
+ * @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ * Devices in the second generation:
+ * 82599
+ * X540
+ **/
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 regval;
+
+ /* Clear the rate limiters */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+ }
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Disable relaxed ordering */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+ regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+ }
+
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_hw_generic - Generic hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware, filling the bus info
+ * structure and media type, clears all on chip counters, initializes receive
+ * address registers, multicast table, VLAN filter table, calls routine to set
+ * up link and flow control settings, and leaves transmit and receive units
+ * disabled and uninitialized
+ **/
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_init_hw_generic");
+
+ /* Reset the hardware */
+ status = hw->mac.ops.reset_hw(hw);
+
+ if (status == IXGBE_SUCCESS) {
+ /* Start the HW */
+ status = hw->mac.ops.start_hw(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
+ * @hw: pointer to hardware structure
+ *
+ * Clears all hardware statistics counters by reading them from the hardware
+ * Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
+{
+ u16 i = 0;
+
+ DEBUGFUNC("ixgbe_clear_hw_cntrs_generic");
+
+ IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+ IXGBE_READ_REG(hw, IXGBE_ILLERRC);
+ IXGBE_READ_REG(hw, IXGBE_ERRBC);
+ IXGBE_READ_REG(hw, IXGBE_MSPDC);
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_MPC(i));
+
+ IXGBE_READ_REG(hw, IXGBE_MLFC);
+ IXGBE_READ_REG(hw, IXGBE_MRFC);
+ IXGBE_READ_REG(hw, IXGBE_RLEC);
+ IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+ if (hw->mac.type >= ixgbe_mac_82599EB) {
+ IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+ } else {
+ IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+ }
+
+ for (i = 0; i < 8; i++) {
+ IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+ if (hw->mac.type >= ixgbe_mac_82599EB) {
+ IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
+ } else {
+ IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+ }
+ }
+ if (hw->mac.type >= ixgbe_mac_82599EB)
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
+ IXGBE_READ_REG(hw, IXGBE_PRC64);
+ IXGBE_READ_REG(hw, IXGBE_PRC127);
+ IXGBE_READ_REG(hw, IXGBE_PRC255);
+ IXGBE_READ_REG(hw, IXGBE_PRC511);
+ IXGBE_READ_REG(hw, IXGBE_PRC1023);
+ IXGBE_READ_REG(hw, IXGBE_PRC1522);
+ IXGBE_READ_REG(hw, IXGBE_GPRC);
+ IXGBE_READ_REG(hw, IXGBE_BPRC);
+ IXGBE_READ_REG(hw, IXGBE_MPRC);
+ IXGBE_READ_REG(hw, IXGBE_GPTC);
+ IXGBE_READ_REG(hw, IXGBE_GORCL);
+ IXGBE_READ_REG(hw, IXGBE_GORCH);
+ IXGBE_READ_REG(hw, IXGBE_GOTCL);
+ IXGBE_READ_REG(hw, IXGBE_GOTCH);
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+ IXGBE_READ_REG(hw, IXGBE_RUC);
+ IXGBE_READ_REG(hw, IXGBE_RFC);
+ IXGBE_READ_REG(hw, IXGBE_ROC);
+ IXGBE_READ_REG(hw, IXGBE_RJC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPRC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPDC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPTC);
+ IXGBE_READ_REG(hw, IXGBE_TORL);
+ IXGBE_READ_REG(hw, IXGBE_TORH);
+ IXGBE_READ_REG(hw, IXGBE_TPR);
+ IXGBE_READ_REG(hw, IXGBE_TPT);
+ IXGBE_READ_REG(hw, IXGBE_PTC64);
+ IXGBE_READ_REG(hw, IXGBE_PTC127);
+ IXGBE_READ_REG(hw, IXGBE_PTC255);
+ IXGBE_READ_REG(hw, IXGBE_PTC511);
+ IXGBE_READ_REG(hw, IXGBE_PTC1023);
+ IXGBE_READ_REG(hw, IXGBE_PTC1522);
+ IXGBE_READ_REG(hw, IXGBE_MPTC);
+ IXGBE_READ_REG(hw, IXGBE_BPTC);
+ for (i = 0; i < 16; i++) {
+ IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+ IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+ if (hw->mac.type >= ixgbe_mac_82599EB) {
+ IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
+ IXGBE_READ_REG(hw, IXGBE_QBRC_H(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC_H(i));
+ IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+ } else {
+ IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+ }
+ }
+
+ if (hw->mac.type == ixgbe_mac_X550 || hw->mac.type == ixgbe_mac_X540) {
+ if (hw->phy.id == 0)
+ ixgbe_identify_phy(hw);
+ hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL,
+ IXGBE_MDIO_PCS_DEV_TYPE, &i);
+ hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH,
+ IXGBE_MDIO_PCS_DEV_TYPE, &i);
+ hw->phy.ops.read_reg(hw, IXGBE_LDPCECL,
+ IXGBE_MDIO_PCS_DEV_TYPE, &i);
+ hw->phy.ops.read_reg(hw, IXGBE_LDPCECH,
+ IXGBE_MDIO_PCS_DEV_TYPE, &i);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_pba_string_generic - Reads part number string from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number string from the EEPROM
+ * @pba_num_size: part number string buffer length
+ *
+ * Reads the part number string from the EEPROM.
+ **/
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+ u32 pba_num_size)
+{
+ s32 ret_val;
+ u16 data;
+ u16 pba_ptr;
+ u16 offset;
+ u16 length;
+
+ DEBUGFUNC("ixgbe_read_pba_string_generic");
+
+ if (pba_num == NULL) {
+ DEBUGOUT("PBA string buffer was null\n");
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+ if (ret_val) {
+ DEBUGOUT("NVM Read Error\n");
+ return ret_val;
+ }
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
+ if (ret_val) {
+ DEBUGOUT("NVM Read Error\n");
+ return ret_val;
+ }
+
+ /*
+ * if data is not ptr guard the PBA must be in legacy format which
+ * means pba_ptr is actually our second data word for the PBA number
+ * and we can decode it into an ascii string
+ */
+ if (data != IXGBE_PBANUM_PTR_GUARD) {
+ DEBUGOUT("NVM PBA number is not stored as string\n");
+
+ /* we will need 11 characters to store the PBA */
+ if (pba_num_size < 11) {
+ DEBUGOUT("PBA string buffer too small\n");
+ return IXGBE_ERR_NO_SPACE;
+ }
+
+ /* extract hex string from data and pba_ptr */
+ pba_num[0] = (data >> 12) & 0xF;
+ pba_num[1] = (data >> 8) & 0xF;
+ pba_num[2] = (data >> 4) & 0xF;
+ pba_num[3] = data & 0xF;
+ pba_num[4] = (pba_ptr >> 12) & 0xF;
+ pba_num[5] = (pba_ptr >> 8) & 0xF;
+ pba_num[6] = '-';
+ pba_num[7] = 0;
+ pba_num[8] = (pba_ptr >> 4) & 0xF;
+ pba_num[9] = pba_ptr & 0xF;
+
+ /* put a null character on the end of our string */
+ pba_num[10] = '\0';
+
+ /* switch all the data but the '-' to hex char */
+ for (offset = 0; offset < 10; offset++) {
+ if (pba_num[offset] < 0xA)
+ pba_num[offset] += '0';
+ else if (pba_num[offset] < 0x10)
+ pba_num[offset] += 'A' - 0xA;
+ }
+
+ return IXGBE_SUCCESS;
+ }
+
+ ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
+ if (ret_val) {
+ DEBUGOUT("NVM Read Error\n");
+ return ret_val;
+ }
+
+ if (length == 0xFFFF || length == 0) {
+ DEBUGOUT("NVM PBA number section invalid length\n");
+ return IXGBE_ERR_PBA_SECTION;
+ }
+
+ /* check if pba_num buffer is big enough */
+ if (pba_num_size < (((u32)length * 2) - 1)) {
+ DEBUGOUT("PBA string buffer too small\n");
+ return IXGBE_ERR_NO_SPACE;
+ }
+
+ /* trim pba length from start of string */
+ pba_ptr++;
+ length--;
+
+ for (offset = 0; offset < length; offset++) {
+ ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
+ if (ret_val) {
+ DEBUGOUT("NVM Read Error\n");
+ return ret_val;
+ }
+ pba_num[offset * 2] = (u8)(data >> 8);
+ pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
+ }
+ pba_num[offset * 2] = '\0';
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number from the EEPROM
+ *
+ * Reads the part number from the EEPROM.
+ **/
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
+{
+ s32 ret_val;
+ u16 data;
+
+ DEBUGFUNC("ixgbe_read_pba_num_generic");
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+ if (ret_val) {
+ DEBUGOUT("NVM Read Error\n");
+ return ret_val;
+ } else if (data == IXGBE_PBANUM_PTR_GUARD) {
+ DEBUGOUT("NVM Not supported\n");
+ return IXGBE_NOT_IMPLEMENTED;
+ }
+ *pba_num = (u32)(data << 16);
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
+ if (ret_val) {
+ DEBUGOUT("NVM Read Error\n");
+ return ret_val;
+ }
+ *pba_num |= data;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_pba_raw
+ * @hw: pointer to the HW structure
+ * @eeprom_buf: optional pointer to EEPROM image
+ * @eeprom_buf_size: size of EEPROM image in words
+ * @max_pba_block_size: PBA block size limit
+ * @pba: pointer to output PBA structure
+ *
+ * Reads PBA from EEPROM image when eeprom_buf is not NULL.
+ * Reads PBA from physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+ u32 eeprom_buf_size, u16 max_pba_block_size,
+ struct ixgbe_pba *pba)
+{
+ s32 ret_val;
+ u16 pba_block_size;
+
+ if (pba == NULL)
+ return IXGBE_ERR_PARAM;
+
+ if (eeprom_buf == NULL) {
+ ret_val = hw->eeprom.ops.read_buffer(hw, IXGBE_PBANUM0_PTR, 2,
+ &pba->word[0]);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
+ pba->word[0] = eeprom_buf[IXGBE_PBANUM0_PTR];
+ pba->word[1] = eeprom_buf[IXGBE_PBANUM1_PTR];
+ } else {
+ return IXGBE_ERR_PARAM;
+ }
+ }
+
+ if (pba->word[0] == IXGBE_PBANUM_PTR_GUARD) {
+ if (pba->pba_block == NULL)
+ return IXGBE_ERR_PARAM;
+
+ ret_val = ixgbe_get_pba_block_size(hw, eeprom_buf,
+ eeprom_buf_size,
+ &pba_block_size);
+ if (ret_val)
+ return ret_val;
+
+ if (pba_block_size > max_pba_block_size)
+ return IXGBE_ERR_PARAM;
+
+ if (eeprom_buf == NULL) {
+ ret_val = hw->eeprom.ops.read_buffer(hw, pba->word[1],
+ pba_block_size,
+ pba->pba_block);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (eeprom_buf_size > (u32)(pba->word[1] +
+ pba_block_size)) {
+ memcpy(pba->pba_block,
+ &eeprom_buf[pba->word[1]],
+ pba_block_size * sizeof(u16));
+ } else {
+ return IXGBE_ERR_PARAM;
+ }
+ }
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_pba_raw
+ * @hw: pointer to the HW structure
+ * @eeprom_buf: optional pointer to EEPROM image
+ * @eeprom_buf_size: size of EEPROM image in words
+ * @pba: pointer to PBA structure
+ *
+ * Writes PBA to EEPROM image when eeprom_buf is not NULL.
+ * Writes PBA to physical EEPROM device when eeprom_buf is NULL.
+ *
+ **/
+s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+ u32 eeprom_buf_size, struct ixgbe_pba *pba)
+{
+ s32 ret_val;
+
+ if (pba == NULL)
+ return IXGBE_ERR_PARAM;
+
+ if (eeprom_buf == NULL) {
+ ret_val = hw->eeprom.ops.write_buffer(hw, IXGBE_PBANUM0_PTR, 2,
+ &pba->word[0]);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
+ eeprom_buf[IXGBE_PBANUM0_PTR] = pba->word[0];
+ eeprom_buf[IXGBE_PBANUM1_PTR] = pba->word[1];
+ } else {
+ return IXGBE_ERR_PARAM;
+ }
+ }
+
+ if (pba->word[0] == IXGBE_PBANUM_PTR_GUARD) {
+ if (pba->pba_block == NULL)
+ return IXGBE_ERR_PARAM;
+
+ if (eeprom_buf == NULL) {
+ ret_val = hw->eeprom.ops.write_buffer(hw, pba->word[1],
+ pba->pba_block[0],
+ pba->pba_block);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (eeprom_buf_size > (u32)(pba->word[1] +
+ pba->pba_block[0])) {
+ memcpy(&eeprom_buf[pba->word[1]],
+ pba->pba_block,
+ pba->pba_block[0] * sizeof(u16));
+ } else {
+ return IXGBE_ERR_PARAM;
+ }
+ }
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_pba_block_size
+ * @hw: pointer to the HW structure
+ * @eeprom_buf: optional pointer to EEPROM image
+ * @eeprom_buf_size: size of EEPROM image in words
+ * @pba_data_size: pointer to output variable
+ *
+ * Returns the size of the PBA block in words. Function operates on EEPROM
+ * image if the eeprom_buf pointer is not NULL otherwise it accesses physical
+ * EEPROM device.
+ *
+ **/
+s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf,
+ u32 eeprom_buf_size, u16 *pba_block_size)
+{
+ s32 ret_val;
+ u16 pba_word[2];
+ u16 length;
+
+ DEBUGFUNC("ixgbe_get_pba_block_size");
+
+ if (eeprom_buf == NULL) {
+ ret_val = hw->eeprom.ops.read_buffer(hw, IXGBE_PBANUM0_PTR, 2,
+ &pba_word[0]);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
+ pba_word[0] = eeprom_buf[IXGBE_PBANUM0_PTR];
+ pba_word[1] = eeprom_buf[IXGBE_PBANUM1_PTR];
+ } else {
+ return IXGBE_ERR_PARAM;
+ }
+ }
+
+ if (pba_word[0] == IXGBE_PBANUM_PTR_GUARD) {
+ if (eeprom_buf == NULL) {
+ ret_val = hw->eeprom.ops.read(hw, pba_word[1] + 0,
+ &length);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (eeprom_buf_size > pba_word[1])
+ length = eeprom_buf[pba_word[1] + 0];
+ else
+ return IXGBE_ERR_PARAM;
+ }
+
+ if (length == 0xFFFF || length == 0)
+ return IXGBE_ERR_PBA_SECTION;
+ } else {
+ /* PBA number in legacy format, there is no PBA Block. */
+ length = 0;
+ }
+
+ if (pba_block_size != NULL)
+ *pba_block_size = length;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_mac_addr_generic - Generic get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
+ *
+ * Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ * A reset of the adapter must be performed prior to calling this function
+ * in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_get_mac_addr_generic");
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
+ rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
+
+ for (i = 0; i < 4; i++)
+ mac_addr[i] = (u8)(rar_low >> (i*8));
+
+ for (i = 0; i < 2; i++)
+ mac_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_pci_config_data_generic - Generic store PCI bus info
+ * @hw: pointer to hardware structure
+ * @link_status: the link status returned by the PCI config space
+ *
+ * Stores the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ if (hw->bus.type == ixgbe_bus_type_unknown)
+ hw->bus.type = ixgbe_bus_type_pci_express;
+
+ switch (link_status & IXGBE_PCI_LINK_WIDTH) {
+ case IXGBE_PCI_LINK_WIDTH_1:
+ hw->bus.width = ixgbe_bus_width_pcie_x1;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_2:
+ hw->bus.width = ixgbe_bus_width_pcie_x2;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_4:
+ hw->bus.width = ixgbe_bus_width_pcie_x4;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_8:
+ hw->bus.width = ixgbe_bus_width_pcie_x8;
+ break;
+ default:
+ hw->bus.width = ixgbe_bus_width_unknown;
+ break;
+ }
+
+ switch (link_status & IXGBE_PCI_LINK_SPEED) {
+ case IXGBE_PCI_LINK_SPEED_2500:
+ hw->bus.speed = ixgbe_bus_speed_2500;
+ break;
+ case IXGBE_PCI_LINK_SPEED_5000:
+ hw->bus.speed = ixgbe_bus_speed_5000;
+ break;
+ case IXGBE_PCI_LINK_SPEED_8000:
+ hw->bus.speed = ixgbe_bus_speed_8000;
+ break;
+ default:
+ hw->bus.speed = ixgbe_bus_speed_unknown;
+ break;
+ }
+
+ mac->ops.set_lan_id(hw);
+}
+
+/**
+ * ixgbe_get_bus_info_generic - Generic set PCI bus info
+ * @hw: pointer to hardware structure
+ *
+ * Gets the PCI bus info (speed, width, type) then calls helper function to
+ * store this data within the ixgbe_hw structure.
+ **/
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
+{
+ u16 link_status;
+
+ DEBUGFUNC("ixgbe_get_bus_info_generic");
+
+ /* Get the negotiated link width and speed from PCI config space */
+ link_status = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_LINK_STATUS);
+
+ ixgbe_set_pci_config_data_generic(hw, link_status);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ * @hw: pointer to the HW structure
+ *
+ * Determines the LAN function id by reading memory-mapped registers
+ * and swaps the port value if requested.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bus_info *bus = &hw->bus;
+ u32 reg;
+
+ DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie");
+
+ reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
+ bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
+ bus->lan_id = bus->func;
+
+ /* check for a port swap */
+ reg = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+ if (reg & IXGBE_FACTPS_LFS)
+ bus->func ^= 0x1;
+}
+
+/**
+ * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
+{
+ u32 reg_val;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_stop_adapter_generic");
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Disable the receive unit */
+ ixgbe_disable_rx(hw);
+
+ /* Clear interrupt mask to stop interrupts from being generated */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+ /* Clear any pending interrupts, flush previous writes */
+ IXGBE_READ_REG(hw, IXGBE_EICR);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ for (i = 0; i < hw->mac.max_tx_queues; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH);
+
+ /* Disable the receive unit by stopping each queue */
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ reg_val |= IXGBE_RXDCTL_SWFLSH;
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
+ }
+
+ /* flush all queues disables */
+ IXGBE_WRITE_FLUSH(hw);
+ msec_delay(2);
+
+ /*
+ * Prevent the PCI-E bus from hanging by disabling PCI-E master
+ * access and verify no pending requests
+ */
+ return ixgbe_disable_pcie_master(hw);
+}
+
+/**
+ * ixgbe_led_on_generic - Turns on the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn on
+ **/
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ DEBUGFUNC("ixgbe_led_on_generic");
+
+ /* To turn on the LED, set mode to ON. */
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_led_off_generic - Turns off the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn off
+ **/
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ DEBUGFUNC("ixgbe_led_off_generic");
+
+ /* To turn off the LED, set mode to OFF. */
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ DEBUGFUNC("ixgbe_init_eeprom_params_generic");
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->type = ixgbe_eeprom_none;
+ /* Set default semaphore delay to 10ms which is a well
+ * tested value */
+ eeprom->semaphore_delay = 10;
+ /* Clear EEPROM page size, it will be initialized as needed */
+ eeprom->word_page_size = 0;
+
+ /*
+ * Check for EEPROM present first.
+ * If not present leave as none
+ */
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (eec & IXGBE_EEC_PRES) {
+ eeprom->type = ixgbe_eeprom_spi;
+
+ /*
+ * SPI EEPROM is assumed here. This code would need to
+ * change if a future EEPROM is not SPI.
+ */
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+ }
+
+ if (eec & IXGBE_EEC_ADDR_SIZE)
+ eeprom->address_bits = 16;
+ else
+ eeprom->address_bits = 8;
+ DEBUGOUT3("Eeprom params: type = %d, size = %d, address bits: "
+ "%d\n", eeprom->type, eeprom->word_size,
+ eeprom->address_bits);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to write
+ * @words: number of word(s)
+ * @data: 16 bit word(s) to write to EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 i, count;
+
+ DEBUGFUNC("ixgbe_write_eeprom_buffer_bit_bang_generic");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /*
+ * The EEPROM page size cannot be queried from the chip. We do lazy
+ * initialization. It is worth to do that when we write large buffer.
+ */
+ if ((hw->eeprom.word_page_size == 0) &&
+ (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
+ ixgbe_detect_eeprom_page_size_generic(hw, offset);
+
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != IXGBE_SUCCESS)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of word(s)
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+STATIC s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+ u16 word;
+ u16 page_size;
+ u16 i;
+ u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
+ DEBUGFUNC("ixgbe_write_eeprom_buffer_bit_bang");
+
+ /* Prepare the EEPROM for writing */
+ status = ixgbe_acquire_eeprom(hw);
+
+ if (status == IXGBE_SUCCESS) {
+ if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
+ ixgbe_release_eeprom(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ if (status == IXGBE_SUCCESS) {
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ ixgbe_shift_out_eeprom_bits(hw,
+ IXGBE_EEPROM_WREN_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
+
+ ixgbe_standby_eeprom(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
+
+ page_size = hw->eeprom.word_page_size;
+
+ /* Send the data in burst via SPI*/
+ do {
+ word = data[i];
+ word = (word >> 8) | (word << 8);
+ ixgbe_shift_out_eeprom_bits(hw, word, 16);
+
+ if (page_size == 0)
+ break;
+
+ /* do not wrap around page */
+ if (((offset + i) & (page_size - 1)) ==
+ (page_size - 1))
+ break;
+ } while (++i < words);
+
+ ixgbe_standby_eeprom(hw);
+ msec_delay(10);
+ }
+ /* Done with writing - release the EEPROM */
+ ixgbe_release_eeprom(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_write_eeprom_generic");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit words(s) from EEPROM
+ * @words: number of word(s)
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 i, count;
+
+ DEBUGFUNC("ixgbe_read_eeprom_buffer_bit_bang_generic");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != IXGBE_SUCCESS)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @words: number of word(s)
+ * @data: read 16 bit word(s) from EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+STATIC s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+ u16 word_in;
+ u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_read_eeprom_buffer_bit_bang");
+
+ /* Prepare the EEPROM for reading */
+ status = ixgbe_acquire_eeprom(hw);
+
+ if (status == IXGBE_SUCCESS) {
+ if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
+ ixgbe_release_eeprom(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ if (status == IXGBE_SUCCESS) {
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
+
+ /* Read the data. */
+ word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+
+ /* End this read operation */
+ ixgbe_release_eeprom(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
+ *
+ * Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_read_eeprom_bit_bang_generic");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of word(s)
+ * @data: 16 bit word(s) from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eerd;
+ s32 status = IXGBE_SUCCESS;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_read_eerd_buffer_generic");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words");
+ goto out;
+ }
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset");
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+ IXGBE_EEPROM_RW_REG_START;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+
+ if (status == IXGBE_SUCCESS) {
+ data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+ IXGBE_EEPROM_RW_REG_DATA);
+ } else {
+ DEBUGOUT("Eeprom read timed out\n");
+ goto out;
+ }
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be used as a scratch pad
+ *
+ * Discover EEPROM page size by writing marching data at given offset.
+ * This function is called only when we are writing a new large buffer
+ * at given offset so the data would be overwritten anyway.
+ **/
+STATIC s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset)
+{
+ u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
+ s32 status = IXGBE_SUCCESS;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_detect_eeprom_page_size_generic");
+
+ for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
+ data[i] = i;
+
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
+ IXGBE_EEPROM_PAGE_SIZE_MAX, data);
+ hw->eeprom.word_page_size = 0;
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ /*
+ * When writing in burst more than the actual page size
+ * EEPROM address wraps around current page.
+ */
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
+
+ DEBUGOUT1("Detected EEPROM page size = %d words.",
+ hw->eeprom.word_page_size);
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_generic - Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
+}
+
+/**
+ * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of word(s)
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eewr;
+ s32 status = IXGBE_SUCCESS;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_write_eewr_generic");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words");
+ goto out;
+ }
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset");
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+ (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
+ IXGBE_EEPROM_RW_REG_START;
+
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT("Eeprom write EEWR timed out\n");
+ goto out;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT("Eeprom write EEWR timed out\n");
+ goto out;
+ }
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
+}
+
+/**
+ * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
+ * @hw: pointer to hardware structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the status bit (bit 1) of the EERD or EEWR to determine when the
+ * read or write is done respectively.
+ **/
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+{
+ u32 i;
+ u32 reg;
+ s32 status = IXGBE_ERR_EEPROM;
+
+ DEBUGFUNC("ixgbe_poll_eerd_eewr_done");
+
+ for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) {
+ if (ee_reg == IXGBE_NVM_POLL_READ)
+ reg = IXGBE_READ_REG(hw, IXGBE_EERD);
+ else
+ reg = IXGBE_READ_REG(hw, IXGBE_EEWR);
+
+ if (reg & IXGBE_EEPROM_RW_REG_DONE) {
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ usec_delay(5);
+ }
+
+ if (i == IXGBE_EERD_EEWR_ATTEMPTS)
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "EEPROM read/write done polling timed out");
+
+ return status;
+}
+
+/**
+ * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ *
+ * Prepares EEPROM for access using bit-bang method. This function should
+ * be called before issuing a command to the EEPROM.
+ **/
+STATIC s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 eec;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_acquire_eeprom");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)
+ != IXGBE_SUCCESS)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == IXGBE_SUCCESS) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Request EEPROM Access */
+ eec |= IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (eec & IXGBE_EEC_GNT)
+ break;
+ usec_delay(5);
+ }
+
+ /* Release if grant not acquired */
+ if (!(eec & IXGBE_EEC_GNT)) {
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ status = IXGBE_ERR_EEPROM;
+ }
+
+ /* Setup EEPROM for Read/Write */
+ if (status == IXGBE_SUCCESS) {
+ /* Clear CS and SK */
+ eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(1);
+ }
+ }
+ return status;
+}
+
+/**
+ * ixgbe_get_eeprom_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM;
+ u32 timeout = 2000;
+ u32 i;
+ u32 swsm;
+
+ DEBUGFUNC("ixgbe_get_eeprom_semaphore");
+
+
+ /* Get SMBI software semaphore between device drivers first */
+ for (i = 0; i < timeout; i++) {
+ /*
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI)) {
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ usec_delay(50);
+ }
+
+ if (i == timeout) {
+ DEBUGOUT("Driver can't access the Eeprom - SMBI Semaphore "
+ "not granted.\n");
+ /*
+ * this release is particularly important because our attempts
+ * above to get the semaphore may have succeeded, and if there
+ * was a timeout, we should unconditionally clear the semaphore
+ * bits to free the driver to make progress
+ */
+ ixgbe_release_eeprom_semaphore(hw);
+
+ usec_delay(50);
+ /*
+ * one last try
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI))
+ status = IXGBE_SUCCESS;
+ }
+
+ /* Now get the semaphore between SW/FW through the SWESMBI bit */
+ if (status == IXGBE_SUCCESS) {
+ for (i = 0; i < timeout; i++) {
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+ /* Set the SW EEPROM semaphore bit to request access */
+ swsm |= IXGBE_SWSM_SWESMBI;
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+ /*
+ * If we set the bit successfully then we got the
+ * semaphore.
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (swsm & IXGBE_SWSM_SWESMBI)
+ break;
+
+ usec_delay(50);
+ }
+
+ /*
+ * Release semaphores and return error if SW EEPROM semaphore
+ * was not granted because we don't have access to the EEPROM
+ */
+ if (i >= timeout) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "SWESMBI Software EEPROM semaphore not granted.\n");
+ ixgbe_release_eeprom_semaphore(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ } else {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Software semaphore SMBI between device drivers "
+ "not granted.\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_release_eeprom_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+STATIC void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+ u32 swsm;
+
+ DEBUGFUNC("ixgbe_release_eeprom_semaphore");
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+ /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
+ swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_ready_eeprom - Polls for EEPROM ready
+ * @hw: pointer to hardware structure
+ **/
+STATIC s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 i;
+ u8 spi_stat_reg;
+
+ DEBUGFUNC("ixgbe_ready_eeprom");
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+ ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
+ spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+ if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+ break;
+
+ usec_delay(5);
+ ixgbe_standby_eeprom(hw);
+ };
+
+ /*
+ * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+ * devices (and only 0-5mSec on 5V devices)
+ */
+ if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+ DEBUGOUT("SPI EEPROM Status error\n");
+ status = IXGBE_ERR_EEPROM;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ DEBUGFUNC("ixgbe_standby_eeprom");
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Toggle CS to flush commands */
+ eec |= IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(1);
+ eec &= ~IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(1);
+}
+
+/**
+ * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ * @hw: pointer to hardware structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ **/
+STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count)
+{
+ u32 eec;
+ u32 mask;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_shift_out_eeprom_bits");
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /*
+ * Mask is used to shift "count" bits of "data" out to the EEPROM
+ * one bit at a time. Determine the starting bit based on count
+ */
+ mask = 0x01 << (count - 1);
+
+ for (i = 0; i < count; i++) {
+ /*
+ * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+ * "1", and then raising and then lowering the clock (the SK
+ * bit controls the clock input to the EEPROM). A "0" is
+ * shifted out to the EEPROM by setting "DI" to "0" and then
+ * raising and then lowering the clock.
+ */
+ if (data & mask)
+ eec |= IXGBE_EEC_DI;
+ else
+ eec &= ~IXGBE_EEC_DI;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ usec_delay(1);
+
+ ixgbe_raise_eeprom_clk(hw, &eec);
+ ixgbe_lower_eeprom_clk(hw, &eec);
+
+ /*
+ * Shift mask to signify next bit of data to shift in to the
+ * EEPROM
+ */
+ mask = mask >> 1;
+ };
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eec &= ~IXGBE_EEC_DI;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to hardware structure
+ **/
+STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+ u32 eec;
+ u32 i;
+ u16 data = 0;
+
+ DEBUGFUNC("ixgbe_shift_in_eeprom_bits");
+
+ /*
+ * In order to read a register from the EEPROM, we need to shift
+ * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+ * the clock input to the EEPROM (setting the SK bit), and then reading
+ * the value of the "DO" bit. During this "shifting in" process the
+ * "DI" bit should always be clear.
+ */
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ ixgbe_raise_eeprom_clk(hw, &eec);
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DI);
+ if (eec & IXGBE_EEC_DO)
+ data |= 1;
+
+ ixgbe_lower_eeprom_clk(hw, &eec);
+ }
+
+ return data;
+}
+
+/**
+ * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eec: EEC register's current value
+ **/
+STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ DEBUGFUNC("ixgbe_raise_eeprom_clk");
+
+ /*
+ * Raise the clock input to the EEPROM
+ * (setting the SK bit), then delay
+ */
+ *eec = *eec | IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(1);
+}
+
+/**
+ * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eecd: EECD's current value
+ **/
+STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ DEBUGFUNC("ixgbe_lower_eeprom_clk");
+
+ /*
+ * Lower the clock input to the EEPROM (clearing the SK bit), then
+ * delay
+ */
+ *eec = *eec & ~IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(1);
+}
+
+/**
+ * ixgbe_release_eeprom - Release EEPROM, release semaphores
+ * @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ DEBUGFUNC("ixgbe_release_eeprom");
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec |= IXGBE_EEC_CS; /* Pull CS high */
+ eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ usec_delay(1);
+
+ /* Stop requesting EEPROM access */
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ /* Delay before attempt to obtain semaphore again to allow FW access */
+ msec_delay(hw->eeprom.semaphore_delay);
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+ u16 i;
+ u16 j;
+ u16 checksum = 0;
+ u16 length = 0;
+ u16 pointer = 0;
+ u16 word = 0;
+
+ DEBUGFUNC("ixgbe_calc_eeprom_checksum_generic");
+
+ /* Include 0x0-0x3F in the checksum */
+ for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+ if (hw->eeprom.ops.read(hw, i, &word)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+ checksum += word;
+ }
+
+ /* Include all data from pointers except for the fw pointer */
+ for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+ if (hw->eeprom.ops.read(hw, i, &pointer)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+
+ /* If the pointer seems invalid */
+ if (pointer == 0xFFFF || pointer == 0)
+ continue;
+
+ if (hw->eeprom.ops.read(hw, pointer, &length)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+
+ if (length == 0xFFFF || length == 0)
+ continue;
+
+ for (j = pointer + 1; j <= pointer + length; j++) {
+ if (hw->eeprom.ops.read(hw, j, &word)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+ checksum += word;
+ }
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return (s32)checksum;
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+ u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ DEBUGFUNC("ixgbe_validate_eeprom_checksum_generic");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ /* Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum)
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum;
+
+ DEBUGFUNC("ixgbe_update_eeprom_checksum_generic");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, checksum);
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_mac_addr - Validate MAC address
+ * @mac_addr: pointer to MAC address.
+ *
+ * Tests a MAC address to ensure it is a valid Individual Address
+ **/
+s32 ixgbe_validate_mac_addr(u8 *mac_addr)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_validate_mac_addr");
+
+ /* Make sure it is not a multicast address */
+ if (IXGBE_IS_MULTICAST(mac_addr)) {
+ DEBUGOUT("MAC address is multicast\n");
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+ /* Not a broadcast address */
+ } else if (IXGBE_IS_BROADCAST(mac_addr)) {
+ DEBUGOUT("MAC address is broadcast\n");
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+ /* Reject the zero address */
+ } else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
+ DEBUGOUT("MAC address is all zeros\n");
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+ }
+ return status;
+}
+
+/**
+ * ixgbe_set_rar_generic - Set Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
+ *
+ * Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
+{
+ u32 rar_low, rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ixgbe_set_rar_generic");
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+ "RAR index %d is out of range.\n", index);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /* setup VMDq pool selection before this RAR gets enabled */
+ hw->mac.ops.set_vmdq(hw, index, vmdq);
+
+ /*
+ * HW expects these in little endian so we reverse the byte
+ * order from network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) |
+ ((u32)addr[3] << 24));
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+ rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
+
+ if (enable_addr != 0)
+ rar_high |= IXGBE_RAH_AV;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clear_rar_generic - Remove Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ *
+ * Clears an ethernet address from a receive address register.
+ **/
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ixgbe_clear_rar_generic");
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+ "RAR index %d is out of range.\n", index);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+ /* clear VMDq pool/queue selection for this RAR */
+ hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
+ * @hw: pointer to hardware structure
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ixgbe_init_rx_addrs_generic");
+
+ /*
+ * If the current mac address is valid, assume it is a software override
+ * to the permanent address.
+ * Otherwise, use the permanent address from the eeprom.
+ */
+ if (ixgbe_validate_mac_addr(hw->mac.addr) ==
+ IXGBE_ERR_INVALID_MAC_ADDR) {
+ /* Get the MAC address from the RAR0 for later reference */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+ DEBUGOUT3(" Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+ } else {
+ /* Setup the receive address. */
+ DEBUGOUT("Overriding MAC Address in RAR[0]\n");
+ DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+
+ /* clear VMDq pool/queue selection for RAR 0 */
+ hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
+ }
+ hw->addr_ctrl.overflow_promisc = 0;
+
+ hw->addr_ctrl.rar_used_count = 1;
+
+ /* Zero out the other receive addresses. */
+ DEBUGOUT1("Clearing RAR[1-%d]\n", rar_entries - 1);
+ for (i = 1; i < rar_entries; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+ }
+
+ /* Clear the MTA */
+ hw->addr_ctrl.mta_in_use = 0;
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+ DEBUGOUT(" Clearing MTA\n");
+ for (i = 0; i < hw->mac.mcft_size; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+ ixgbe_init_uta_tables(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_add_uc_addr - Adds a secondary unicast address.
+ * @hw: pointer to hardware structure
+ * @addr: new address
+ *
+ * Adds it to unused receive address register or goes into promiscuous mode.
+ **/
+void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+ u32 rar_entries = hw->mac.num_rar_entries;
+ u32 rar;
+
+ DEBUGFUNC("ixgbe_add_uc_addr");
+
+ DEBUGOUT6(" UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+
+ /*
+ * Place this address in the RAR if there is room,
+ * else put the controller into promiscuous mode
+ */
+ if (hw->addr_ctrl.rar_used_count < rar_entries) {
+ rar = hw->addr_ctrl.rar_used_count;
+ hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+ DEBUGOUT1("Added a secondary address to RAR[%d]\n", rar);
+ hw->addr_ctrl.rar_used_count++;
+ } else {
+ hw->addr_ctrl.overflow_promisc++;
+ }
+
+ DEBUGOUT("ixgbe_add_uc_addr Complete\n");
+}
+
+/**
+ * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
+ * @hw: pointer to hardware structure
+ * @addr_list: the list of new addresses
+ * @addr_count: number of addresses
+ * @next: iterator function to walk the address list
+ *
+ * The given list replaces any existing list. Clears the secondary addrs from
+ * receive address registers. Uses unused receive address registers for the
+ * first secondary addresses, and falls back to promiscuous mode as needed.
+ *
+ * Drivers using secondary unicast addresses must set user_set_promisc when
+ * manually putting the device into promiscuous mode.
+ **/
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
+ u32 addr_count, ixgbe_mc_addr_itr next)
+{
+ u8 *addr;
+ u32 i;
+ u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
+ u32 uc_addr_in_use;
+ u32 fctrl;
+ u32 vmdq;
+
+ DEBUGFUNC("ixgbe_update_uc_addr_list_generic");
+
+ /*
+ * Clear accounting of old secondary address list,
+ * don't count RAR[0]
+ */
+ uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
+ hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
+ hw->addr_ctrl.overflow_promisc = 0;
+
+ /* Zero out the other receive addresses */
+ DEBUGOUT1("Clearing RAR[1-%d]\n", uc_addr_in_use+1);
+ for (i = 0; i < uc_addr_in_use; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0);
+ }
+
+ /* Add the new addresses */
+ for (i = 0; i < addr_count; i++) {
+ DEBUGOUT(" Adding the secondary addresses:\n");
+ addr = next(hw, &addr_list, &vmdq);
+ ixgbe_add_uc_addr(hw, addr, vmdq);
+ }
+
+ if (hw->addr_ctrl.overflow_promisc) {
+ /* enable promisc if not already in overflow or set by user */
+ if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
+ DEBUGOUT(" Entering address overflow promisc mode\n");
+ fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ fctrl |= IXGBE_FCTRL_UPE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+ }
+ } else {
+ /* only disable if set by overflow, not by user */
+ if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
+ DEBUGOUT(" Leaving address overflow promisc mode\n");
+ fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ fctrl &= ~IXGBE_FCTRL_UPE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+ }
+ }
+
+ DEBUGOUT("ixgbe_update_uc_addr_list_generic Complete\n");
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
+ *
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
+ **/
+STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector = 0;
+
+ DEBUGFUNC("ixgbe_mta_vector");
+
+ switch (hw->mac.mc_filter_type) {
+ case 0: /* use bits [47:36] of the address */
+ vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ break;
+ case 1: /* use bits [46:35] of the address */
+ vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ break;
+ case 2: /* use bits [45:34] of the address */
+ vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ break;
+ case 3: /* use bits [43:32] of the address */
+ vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ break;
+ default: /* Invalid mc_filter_type */
+ DEBUGOUT("MC filter type param set incorrectly\n");
+ ASSERT(0);
+ break;
+ }
+
+ /* vector can only be 12-bits or boundary will be exceeded */
+ vector &= 0xFFF;
+ return vector;
+}
+
+/**
+ * ixgbe_set_mta - Set bit-vector in multicast table
+ * @hw: pointer to hardware structure
+ * @hash_value: Multicast address hash value
+ *
+ * Sets the bit-vector in the multicast table.
+ **/
+void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector;
+ u32 vector_bit;
+ u32 vector_reg;
+
+ DEBUGFUNC("ixgbe_set_mta");
+
+ hw->addr_ctrl.mta_in_use++;
+
+ vector = ixgbe_mta_vector(hw, mc_addr);
+ DEBUGOUT1(" bit-vector = 0x%03X\n", vector);
+
+ /*
+ * The MTA is a register array of 128 32-bit registers. It is treated
+ * like an array of 4096 bits. We want to set bit
+ * BitArray[vector_value]. So we figure out what register the bit is
+ * in, read it, OR in the new bit, then write back the new value. The
+ * register is determined by the upper 7 bits of the vector value and
+ * the bit within that register are determined by the lower 5 bits of
+ * the value.
+ */
+ vector_reg = (vector >> 5) & 0x7F;
+ vector_bit = vector & 0x1F;
+ hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
+}
+
+/**
+ * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
+ * @hw: pointer to hardware structure
+ * @mc_addr_list: the list of new multicast addresses
+ * @mc_addr_count: number of addresses
+ * @next: iterator function to walk the multicast address list
+ * @clear: flag, when set clears the table beforehand
+ *
+ * When the clear flag is set, the given list replaces any existing list.
+ * Hashes the given addresses into the multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, ixgbe_mc_addr_itr next,
+ bool clear)
+{
+ u32 i;
+ u32 vmdq;
+
+ DEBUGFUNC("ixgbe_update_mc_addr_list_generic");
+
+ /*
+ * Set the new number of MC addresses that we are being requested to
+ * use.
+ */
+ hw->addr_ctrl.num_mc_addrs = mc_addr_count;
+ hw->addr_ctrl.mta_in_use = 0;
+
+ /* Clear mta_shadow */
+ if (clear) {
+ DEBUGOUT(" Clearing MTA\n");
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+ }
+
+ /* Update mta_shadow */
+ for (i = 0; i < mc_addr_count; i++) {
+ DEBUGOUT(" Adding the multicast addresses:\n");
+ ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
+ }
+
+ /* Enable mta */
+ for (i = 0; i < hw->mac.mcft_size; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i,
+ hw->mac.mta_shadow[i]);
+
+ if (hw->addr_ctrl.mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
+ IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
+
+ DEBUGOUT("ixgbe_update_mc_addr_list_generic Complete\n");
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_enable_mc_generic - Enable multicast address in RAR
+ * @hw: pointer to hardware structure
+ *
+ * Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+ DEBUGFUNC("ixgbe_enable_mc_generic");
+
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+ hw->mac.mc_filter_type);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_disable_mc_generic - Disable multicast address in RAR
+ * @hw: pointer to hardware structure
+ *
+ * Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+ DEBUGFUNC("ixgbe_disable_mc_generic");
+
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_fc_enable_generic - Enable flow control
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 mflcn_reg, fccfg_reg;
+ u32 reg;
+ u32 fcrtl, fcrth;
+ int i;
+
+ DEBUGFUNC("ixgbe_fc_enable_generic");
+
+ /* Validate the water mark configuration */
+ if (!hw->fc.pause_time) {
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /* Low water mark of zero causes XOFF floods */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ if (!hw->fc.low_water[i] ||
+ hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+ DEBUGOUT("Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+ }
+ }
+
+ /* Negotiate the fc mode to use */
+ ixgbe_fc_autoneg(hw);
+
+ /* Disable any previous flow control settings */
+ mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+ mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
+
+ fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+ fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
+
+ /*
+ * The possible values of fc.current_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.current_mode) {
+ case ixgbe_fc_none:
+ /*
+ * Flow control is disabled by software override or autoneg.
+ * The code below will actually disable it in the HW.
+ */
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ mflcn_reg |= IXGBE_MFLCN_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ mflcn_reg |= IXGBE_MFLCN_RFCE;
+ fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+ break;
+ default:
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
+ "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ /* Set 802.3x based flow control settings. */
+ mflcn_reg |= IXGBE_MFLCN_DPF;
+ IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
+
+
+ /* Set up and enable Rx high/low water mark thresholds, enable XON. */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
+ fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+ /*
+ * In order to prevent Tx hangs when the internal Tx
+ * switch is enabled we must set the high water mark
+ * to the Rx packet buffer size - 24KB. This allows
+ * the Tx switch to function even under heavy Rx
+ * workloads.
+ */
+ fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth);
+ }
+
+ /* Configure pause time (2 TCs per register) */
+ reg = hw->fc.pause_time * 0x00010001;
+ for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_negotiate_fc - Negotiate flow control
+ * @hw: pointer to hardware structure
+ * @adv_reg: flow control advertised settings
+ * @lp_reg: link partner's flow control settings
+ * @adv_sym: symmetric pause bit in advertisement
+ * @adv_asm: asymmetric pause bit in advertisement
+ * @lp_sym: symmetric pause bit in link partner advertisement
+ * @lp_asm: asymmetric pause bit in link partner advertisement
+ *
+ * Find the intersection between advertised settings and link partner's
+ * advertised settings
+ **/
+STATIC s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+ u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+{
+ if ((!(adv_reg)) || (!(lp_reg))) {
+ ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
+ "Local or link partner's advertised flow control "
+ "settings are NULL. Local: %x, link partner: %x\n",
+ adv_reg, lp_reg);
+ return IXGBE_ERR_FC_NOT_NEGOTIATED;
+ }
+
+ if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
+ /*
+ * Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_full) {
+ hw->fc.current_mode = ixgbe_fc_full;
+ DEBUGOUT("Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ DEBUGOUT("Flow Control=RX PAUSE frames only\n");
+ }
+ } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+ (lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+ hw->fc.current_mode = ixgbe_fc_tx_pause;
+ DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
+ } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+ !(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_none;
+ DEBUGOUT("Flow Control = NONE.\n");
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according on 1 gig fiber.
+ **/
+STATIC s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
+{
+ u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+ s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+ /*
+ * On multispeed fiber at 1g, bail out if
+ * - link is up but AN did not complete, or if
+ * - link is up and AN completed but timed out
+ */
+
+ linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+ if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+ (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+ DEBUGOUT("Auto-Negotiation did not complete or timed out\n");
+ goto out;
+ }
+
+ pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+ pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+
+ ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg,
+ pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE,
+ IXGBE_PCS1GANA_ASM_PAUSE,
+ IXGBE_PCS1GANA_SYM_PAUSE,
+ IXGBE_PCS1GANA_ASM_PAUSE);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to IEEE clause 37.
+ **/
+STATIC s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
+{
+ u32 links2, anlp1_reg, autoc_reg, links;
+ s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+ /*
+ * On backplane, bail out if
+ * - backplane autoneg was not completed, or if
+ * - we are 82599 and link partner is not AN enabled
+ */
+ links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
+ DEBUGOUT("Auto-Negotiation did not complete\n");
+ goto out;
+ }
+
+ if (hw->mac.type == ixgbe_mac_82599EB) {
+ links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+ if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
+ DEBUGOUT("Link partner is not AN enabled\n");
+ goto out;
+ }
+ }
+ /*
+ * Read the 10g AN autoc and LP ability registers and resolve
+ * local flow control settings accordingly
+ */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+ ret_val = ixgbe_negotiate_fc(hw, autoc_reg,
+ anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE,
+ IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to IEEE clause 37.
+ **/
+STATIC s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
+{
+ u16 technology_ability_reg = 0;
+ u16 lp_technology_ability_reg = 0;
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &technology_ability_reg);
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_LP,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &lp_technology_ability_reg);
+
+ return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg,
+ (u32)lp_technology_ability_reg,
+ IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE,
+ IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE);
+}
+
+/**
+ * ixgbe_fc_autoneg - Configure flow control
+ * @hw: pointer to hardware structure
+ *
+ * Compares our advertised flow control capabilities to those advertised by
+ * our link partner, and determines the proper flow control mode to use.
+ **/
+void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ ixgbe_link_speed speed;
+ bool link_up;
+
+ DEBUGFUNC("ixgbe_fc_autoneg");
+
+ /*
+ * AN should have completed when the cable was plugged in.
+ * Look for reasons to bail out. Bail out if:
+ * - FC autoneg is disabled, or if
+ * - link is not up.
+ */
+ if (hw->fc.disable_fc_autoneg) {
+ ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
+ "Flow control autoneg is disabled");
+ goto out;
+ }
+
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ if (!link_up) {
+ ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down");
+ goto out;
+ }
+
+ switch (hw->phy.media_type) {
+ /* Autoneg flow control on fiber adapters */
+ case ixgbe_media_type_fiber_qsfp:
+ case ixgbe_media_type_fiber:
+ if (speed == IXGBE_LINK_SPEED_1GB_FULL)
+ ret_val = ixgbe_fc_autoneg_fiber(hw);
+ break;
+
+ /* Autoneg flow control on backplane adapters */
+ case ixgbe_media_type_backplane:
+ ret_val = ixgbe_fc_autoneg_backplane(hw);
+ break;
+
+ /* Autoneg flow control on copper adapters */
+ case ixgbe_media_type_copper:
+ if (ixgbe_device_supports_autoneg_fc(hw))
+ ret_val = ixgbe_fc_autoneg_copper(hw);
+ break;
+
+ default:
+ break;
+ }
+
+out:
+ if (ret_val == IXGBE_SUCCESS) {
+ hw->fc.fc_was_autonegged = true;
+ } else {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ }
+}
+
+/*
+ * ixgbe_pcie_timeout_poll - Return number of times to poll for completion
+ * @hw: pointer to hardware structure
+ *
+ * System-wide timeout range is encoded in PCIe Device Control2 register.
+ *
+ * Add 10% to specified maximum and return the number of times to poll for
+ * completion timeout, in units of 100 microsec. Never return less than
+ * 800 = 80 millisec.
+ */
+STATIC u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw)
+{
+ s16 devctl2;
+ u32 pollcnt;
+
+ devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2);
+ devctl2 &= IXGBE_PCIDEVCTRL2_TIMEO_MASK;
+
+ switch (devctl2) {
+ case IXGBE_PCIDEVCTRL2_65_130ms:
+ pollcnt = 1300; /* 130 millisec */
+ break;
+ case IXGBE_PCIDEVCTRL2_260_520ms:
+ pollcnt = 5200; /* 520 millisec */
+ break;
+ case IXGBE_PCIDEVCTRL2_1_2s:
+ pollcnt = 20000; /* 2 sec */
+ break;
+ case IXGBE_PCIDEVCTRL2_4_8s:
+ pollcnt = 80000; /* 8 sec */
+ break;
+ case IXGBE_PCIDEVCTRL2_17_34s:
+ pollcnt = 34000; /* 34 sec */
+ break;
+ case IXGBE_PCIDEVCTRL2_50_100us: /* 100 microsecs */
+ case IXGBE_PCIDEVCTRL2_1_2ms: /* 2 millisecs */
+ case IXGBE_PCIDEVCTRL2_16_32ms: /* 32 millisec */
+ case IXGBE_PCIDEVCTRL2_16_32ms_def: /* 32 millisec default */
+ default:
+ pollcnt = 800; /* 80 millisec minimum */
+ break;
+ }
+
+ /* add 10% to spec maximum */
+ return (pollcnt * 11) / 10;
+}
+
+/**
+ * ixgbe_disable_pcie_master - Disable PCI-express master access
+ * @hw: pointer to hardware structure
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ * bit hasn't caused the master requests to be disabled, else IXGBE_SUCCESS
+ * is returned signifying master requests disabled.
+ **/
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 i, poll;
+ u16 value;
+
+ DEBUGFUNC("ixgbe_disable_pcie_master");
+
+ /* Always set this bit to ensure any future transactions are blocked */
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS);
+
+ /* Exit if master requests are blocked */
+ if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO) ||
+ IXGBE_REMOVED(hw->hw_addr))
+ goto out;
+
+ /* Poll for master request bit to clear */
+ for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+ usec_delay(100);
+ if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+ goto out;
+ }
+
+ /*
+ * Two consecutive resets are required via CTRL.RST per datasheet
+ * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine
+ * of this need. The first reset prevents new master requests from
+ * being issued by our device. We then must wait 1usec or more for any
+ * remaining completions from the PCIe bus to trickle in, and then reset
+ * again to clear out any effects they may have had on our device.
+ */
+ DEBUGOUT("GIO Master Disable bit didn't clear - requesting resets\n");
+ hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+
+ if (hw->mac.type >= ixgbe_mac_X550)
+ goto out;
+
+ /*
+ * Before proceeding, make sure that the PCIe block does not have
+ * transactions pending.
+ */
+ poll = ixgbe_pcie_timeout_poll(hw);
+ for (i = 0; i < poll; i++) {
+ usec_delay(100);
+ value = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS);
+ if (IXGBE_REMOVED(hw->hw_addr))
+ goto out;
+ if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
+ goto out;
+ }
+
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "PCIe transaction pending bit also did not clear.\n");
+ status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore through the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 gssr = 0;
+ u32 swmask = mask;
+ u32 fwmask = mask << 5;
+ u32 timeout = 200;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_acquire_swfw_sync");
+
+ for (i = 0; i < timeout; i++) {
+ /*
+ * SW NVM semaphore bit is used for access to all
+ * SW_FW_SYNC bits (not just NVM)
+ */
+ if (ixgbe_get_eeprom_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+ if (!(gssr & (fwmask | swmask))) {
+ gssr |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+ ixgbe_release_eeprom_semaphore(hw);
+ return IXGBE_SUCCESS;
+ } else {
+ /* Resource is currently in use by FW or SW */
+ ixgbe_release_eeprom_semaphore(hw);
+ msec_delay(5);
+ }
+ }
+
+ /* If time expired clear the bits holding the lock and retry */
+ if (gssr & (fwmask | swmask))
+ ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask));
+
+ msec_delay(5);
+ return IXGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ * ixgbe_release_swfw_sync - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 gssr;
+ u32 swmask = mask;
+
+ DEBUGFUNC("ixgbe_release_swfw_sync");
+
+ ixgbe_get_eeprom_semaphore(hw);
+
+ gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+ gssr &= ~swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+ ixgbe_release_eeprom_semaphore(hw);
+}
+
+/**
+ * ixgbe_disable_sec_rx_path_generic - Stops the receive data path
+ * @hw: pointer to hardware structure
+ *
+ * Stops the receive data path and waits for the HW to internally empty
+ * the Rx security block
+ **/
+s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw)
+{
+#define IXGBE_MAX_SECRX_POLL 40
+
+ int i;
+ int secrxreg;
+
+ DEBUGFUNC("ixgbe_disable_sec_rx_path_generic");
+
+
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+ for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
+ if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
+ break;
+ else
+ /* Use interrupt-safe sleep just in case */
+ usec_delay(1000);
+ }
+
+ /* For informational purposes only */
+ if (i >= IXGBE_MAX_SECRX_POLL)
+ DEBUGOUT("Rx unit being enabled before security "
+ "path fully disabled. Continuing with init.\n");
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
+ * @hw: pointer to hardware structure
+ * @reg_val: Value we read from AUTOC
+ *
+ * The default case requires no protection so just to the register read.
+ */
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+ *locked = false;
+ *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * prot_autoc_write_generic - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ * previous read.
+ *
+ * The default case requires no protection so just to the register write.
+ */
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked)
+{
+ UNREFERENCED_1PARAMETER(locked);
+
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_val);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_enable_sec_rx_path_generic - Enables the receive data path
+ * @hw: pointer to hardware structure
+ *
+ * Enables the receive data path.
+ **/
+s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
+{
+ int secrxreg;
+
+ DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
+
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit
+ **/
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
+{
+ DEBUGFUNC("ixgbe_enable_rx_dma_generic");
+
+ if (regval & IXGBE_RXCTRL_RXEN)
+ ixgbe_enable_rx(hw);
+ else
+ ixgbe_disable_rx(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_blink_led_start_generic - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
+{
+ ixgbe_link_speed speed = 0;
+ bool link_up = 0;
+ u32 autoc_reg = 0;
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ s32 ret_val = IXGBE_SUCCESS;
+ bool locked = false;
+
+ DEBUGFUNC("ixgbe_blink_led_start_generic");
+
+ /*
+ * Link must be up to auto-blink the LEDs;
+ * Force it if link is down.
+ */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+ if (!link_up) {
+ ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ autoc_reg |= IXGBE_AUTOC_FLU;
+
+ ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ IXGBE_WRITE_FLUSH(hw);
+ msec_delay(10);
+ }
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 autoc_reg = 0;
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ s32 ret_val = IXGBE_SUCCESS;
+ bool locked = false;
+
+ DEBUGFUNC("ixgbe_blink_led_stop_generic");
+
+ ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ autoc_reg &= ~IXGBE_AUTOC_FLU;
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+
+ ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg &= ~IXGBE_LED_BLINK(index);
+ led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_offset: SAN MAC address offset
+ *
+ * This function will read the EEPROM location for the SAN MAC address
+ * pointer, and returns the value at that location. This is used in both
+ * get and set mac_addr routines.
+ **/
+STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
+ u16 *san_mac_offset)
+{
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_get_san_mac_addr_offset");
+
+ /*
+ * First read the EEPROM pointer to see if the MAC addresses are
+ * available.
+ */
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR,
+ san_mac_offset);
+ if (ret_val) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom at offset %d failed",
+ IXGBE_SAN_MAC_ADDR_PTR);
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
+ *
+ * Reads the SAN MAC address from the EEPROM, if it's available. This is
+ * per-port, so set_lan_id() must be called before reading the addresses.
+ * set_lan_id() is called by identify_sfp(), but this cannot be relied
+ * upon for non-SFP connections, so we must call it here.
+ **/
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+ u16 san_mac_data, san_mac_offset;
+ u8 i;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_get_san_mac_addr_generic");
+
+ /*
+ * First read the EEPROM pointer to see if the MAC addresses are
+ * available. If they're not, no point in calling set_lan_id() here.
+ */
+ ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+ if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
+ goto san_mac_addr_out;
+
+ /* make sure we know which port we need to program */
+ hw->mac.ops.set_lan_id(hw);
+ /* apply the port offset to the address offset */
+ (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+ (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+ for (i = 0; i < 3; i++) {
+ ret_val = hw->eeprom.ops.read(hw, san_mac_offset,
+ &san_mac_data);
+ if (ret_val) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ san_mac_offset);
+ goto san_mac_addr_out;
+ }
+ san_mac_addr[i * 2] = (u8)(san_mac_data);
+ san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
+ san_mac_offset++;
+ }
+ return IXGBE_SUCCESS;
+
+san_mac_addr_out:
+ /*
+ * No addresses available in this EEPROM. It's not an
+ * error though, so just wipe the local address and return.
+ */
+ for (i = 0; i < 6; i++)
+ san_mac_addr[i] = 0xFF;
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
+ *
+ * Write a SAN MAC address to the EEPROM.
+ **/
+s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+ s32 ret_val;
+ u16 san_mac_data, san_mac_offset;
+ u8 i;
+
+ DEBUGFUNC("ixgbe_set_san_mac_addr_generic");
+
+ /* Look for SAN mac address pointer. If not defined, return */
+ ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+ if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
+ return IXGBE_ERR_NO_SAN_ADDR_PTR;
+
+ /* Make sure we know which port we need to write */
+ hw->mac.ops.set_lan_id(hw);
+ /* Apply the port offset to the address offset */
+ (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+ (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+
+ for (i = 0; i < 3; i++) {
+ san_mac_data = (u16)((u16)(san_mac_addr[i * 2 + 1]) << 8);
+ san_mac_data |= (u16)(san_mac_addr[i * 2]);
+ hw->eeprom.ops.write(hw, san_mac_offset, san_mac_data);
+ san_mac_offset++;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
+ *
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
+ **/
+u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
+{
+ u16 msix_count = 1;
+ u16 max_msix_count;
+ u16 pcie_offset;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS;
+ max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598;
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS;
+ max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599;
+ break;
+ default:
+ return msix_count;
+ }
+
+ DEBUGFUNC("ixgbe_get_pcie_msix_count_generic");
+ msix_count = IXGBE_READ_PCIE_WORD(hw, pcie_offset);
+ if (IXGBE_REMOVED(hw->hw_addr))
+ msix_count = 0;
+ msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+ /* MSI-X count is zero-based in HW */
+ msix_count++;
+
+ if (msix_count > max_msix_count)
+ msix_count = max_msix_count;
+
+ return msix_count;
+}
+
+/**
+ * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address
+ * @hw: pointer to hardware structure
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq pool to assign
+ *
+ * Puts an ethernet address into a receive address register, or
+ * finds the rar that it is aleady in; adds to the pool list
+ **/
+s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
+{
+ static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF;
+ u32 first_empty_rar = NO_EMPTY_RAR_FOUND;
+ u32 rar;
+ u32 rar_low, rar_high;
+ u32 addr_low, addr_high;
+
+ DEBUGFUNC("ixgbe_insert_mac_addr_generic");
+
+ /* swap bytes for HW little endian */
+ addr_low = addr[0] | (addr[1] << 8)
+ | (addr[2] << 16)
+ | (addr[3] << 24);
+ addr_high = addr[4] | (addr[5] << 8);
+
+ /*
+ * Either find the mac_id in rar or find the first empty space.
+ * rar_highwater points to just after the highest currently used
+ * rar in order to shorten the search. It grows when we add a new
+ * rar to the top.
+ */
+ for (rar = 0; rar < hw->mac.rar_highwater; rar++) {
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+
+ if (((IXGBE_RAH_AV & rar_high) == 0)
+ && first_empty_rar == NO_EMPTY_RAR_FOUND) {
+ first_empty_rar = rar;
+ } else if ((rar_high & 0xFFFF) == addr_high) {
+ rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(rar));
+ if (rar_low == addr_low)
+ break; /* found it already in the rars */
+ }
+ }
+
+ if (rar < hw->mac.rar_highwater) {
+ /* already there so just add to the pool bits */
+ ixgbe_set_vmdq(hw, rar, vmdq);
+ } else if (first_empty_rar != NO_EMPTY_RAR_FOUND) {
+ /* stick it into first empty RAR slot we found */
+ rar = first_empty_rar;
+ ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+ } else if (rar == hw->mac.rar_highwater) {
+ /* add it to the top of the list and inc the highwater mark */
+ ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
+ hw->mac.rar_highwater++;
+ } else if (rar >= hw->mac.num_rar_entries) {
+ return IXGBE_ERR_INVALID_MAC_ADDR;
+ }
+
+ /*
+ * If we found rar[0], make sure the default pool bit (we use pool 0)
+ * remains cleared to be sure default pool packets will get delivered
+ */
+ if (rar == 0)
+ ixgbe_clear_vmdq(hw, rar, 0);
+
+ return rar;
+}
+
+/**
+ * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to disassociate
+ * @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar_lo, mpsar_hi;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ixgbe_clear_vmdq_generic");
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+ "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+ mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+
+ if (IXGBE_REMOVED(hw->hw_addr))
+ goto done;
+
+ if (!mpsar_lo && !mpsar_hi)
+ goto done;
+
+ if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
+ if (mpsar_lo) {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+ mpsar_lo = 0;
+ }
+ if (mpsar_hi) {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+ mpsar_hi = 0;
+ }
+ } else if (vmdq < 32) {
+ mpsar_lo &= ~(1 << vmdq);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
+ } else {
+ mpsar_hi &= ~(1 << (vmdq - 32));
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
+ }
+
+ /* was that the last pool using this rar? */
+ if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+ hw->mac.ops.clear_rar(hw, rar);
+done:
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ixgbe_set_vmdq_generic");
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+ "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ if (vmdq < 32) {
+ mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+ mpsar |= 1 << vmdq;
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
+ } else {
+ mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+ mpsar |= 1 << (vmdq - 32);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * This function should only be involved in the IOV mode.
+ * In IOV mode, Default pool is next pool after the number of
+ * VFs advertized and not 0.
+ * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index]
+ *
+ * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq)
+{
+ u32 rar = hw->mac.san_mac_rar_index;
+
+ DEBUGFUNC("ixgbe_set_vmdq_san_mac");
+
+ if (vmdq < 32) {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 1 << vmdq);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 1 << (vmdq - 32));
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
+{
+ int i;
+
+ DEBUGFUNC("ixgbe_init_uta_tables_generic");
+ DEBUGOUT(" Clearing UTA\n");
+
+ for (i = 0; i < 128; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ *
+ * return the VLVF index where this VLAN id should be placed
+ *
+ **/
+s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
+{
+ u32 bits = 0;
+ u32 first_empty_slot = 0;
+ s32 regindex;
+
+ /* short cut the special case */
+ if (vlan == 0)
+ return 0;
+
+ /*
+ * Search for the vlan id in the VLVF entries. Save off the first empty
+ * slot found along the way
+ */
+ for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+ bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
+ if (!bits && !(first_empty_slot))
+ first_empty_slot = regindex;
+ else if ((bits & 0x0FFF) == vlan)
+ break;
+ }
+
+ /*
+ * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
+ * in the VLVF. Else use the first empty VLVF register for this
+ * vlan id.
+ */
+ if (regindex >= IXGBE_VLVF_ENTRIES) {
+ if (first_empty_slot)
+ regindex = first_empty_slot;
+ else {
+ ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
+ "No space in VLVF.\n");
+ regindex = IXGBE_ERR_NO_SPACE;
+ }
+ }
+
+ return regindex;
+}
+
+/**
+ * ixgbe_set_vfta_generic - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ s32 regindex;
+ u32 bitindex;
+ u32 vfta;
+ u32 targetbit;
+ s32 ret_val = IXGBE_SUCCESS;
+ bool vfta_changed = false;
+
+ DEBUGFUNC("ixgbe_set_vfta_generic");
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /*
+ * this is a 2 part operation - first the VFTA, then the
+ * VLVF and VLVFB if VT Mode is set
+ * We don't write the VFTA until we know the VLVF part succeeded.
+ */
+
+ /* Part 1
+ * The VFTA is a bitstring made up of 128 32-bit registers
+ * that enable the particular VLAN id, much like the MTA:
+ * bits[11-5]: which register
+ * bits[4-0]: which bit in the register
+ */
+ regindex = (vlan >> 5) & 0x7F;
+ bitindex = vlan & 0x1F;
+ targetbit = (1 << bitindex);
+ vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+
+ if (vlan_on) {
+ if (!(vfta & targetbit)) {
+ vfta |= targetbit;
+ vfta_changed = true;
+ }
+ } else {
+ if ((vfta & targetbit)) {
+ vfta &= ~targetbit;
+ vfta_changed = true;
+ }
+ }
+
+ /* Part 2
+ * Call ixgbe_set_vlvf_generic to set VLVFB and VLVF
+ */
+ ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on,
+ &vfta_changed);
+ if (ret_val != IXGBE_SUCCESS)
+ return ret_val;
+
+ if (vfta_changed)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_vlvf_generic - Set VLAN Pool Filter
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ * @vfta_changed: pointer to boolean flag which indicates whether VFTA
+ * should be changed
+ *
+ * Turn on/off specified bit in VLVF table.
+ **/
+s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on, bool *vfta_changed)
+{
+ u32 vt;
+
+ DEBUGFUNC("ixgbe_set_vlvf_generic");
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /* If VT Mode is set
+ * Either vlan_on
+ * make sure the vlan is in VLVF
+ * set the vind bit in the matching VLVFB
+ * Or !vlan_on
+ * clear the pool bit and possibly the vind
+ */
+ vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+ if (vt & IXGBE_VT_CTL_VT_ENABLE) {
+ s32 vlvf_index;
+ u32 bits;
+
+ vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
+ if (vlvf_index < 0)
+ return vlvf_index;
+
+ if (vlan_on) {
+ /* set the pool bit */
+ if (vind < 32) {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(vlvf_index * 2));
+ bits |= (1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB(vlvf_index * 2),
+ bits);
+ } else {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((vlvf_index * 2) + 1));
+ bits |= (1 << (vind - 32));
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB((vlvf_index * 2) + 1),
+ bits);
+ }
+ } else {
+ /* clear the pool bit */
+ if (vind < 32) {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(vlvf_index * 2));
+ bits &= ~(1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB(vlvf_index * 2),
+ bits);
+ bits |= IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((vlvf_index * 2) + 1));
+ } else {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((vlvf_index * 2) + 1));
+ bits &= ~(1 << (vind - 32));
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB((vlvf_index * 2) + 1),
+ bits);
+ bits |= IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(vlvf_index * 2));
+ }
+ }
+
+ /*
+ * If there are still bits set in the VLVFB registers
+ * for the VLAN ID indicated we need to see if the
+ * caller is requesting that we clear the VFTA entry bit.
+ * If the caller has requested that we clear the VFTA
+ * entry bit but there are still pools/VFs using this VLAN
+ * ID entry then ignore the request. We're not worried
+ * about the case where we're turning the VFTA VLAN ID
+ * entry bit on, only when requested to turn it off as
+ * there may be multiple pools and/or VFs using the
+ * VLAN ID entry. In that case we cannot clear the
+ * VFTA bit until all pools/VFs using that VLAN ID have also
+ * been cleared. This will be indicated by "bits" being
+ * zero.
+ */
+ if (bits) {
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
+ (IXGBE_VLVF_VIEN | vlan));
+ if ((!vlan_on) && (vfta_changed != NULL)) {
+ /* someone wants to clear the vfta entry
+ * but some pools/VFs are still using it.
+ * Ignore it. */
+ *vfta_changed = false;
+ }
+ } else
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clear_vfta_generic - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
+{
+ u32 offset;
+
+ DEBUGFUNC("ixgbe_clear_vfta_generic");
+
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_check_mac_link_generic - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ u32 links_reg, links_orig;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_check_mac_link_generic");
+
+ /* clear the old state */
+ links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+ if (links_orig != links_reg) {
+ DEBUGOUT2("LINKS changed from %08X to %08X\n",
+ links_orig, links_reg);
+ }
+
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < hw->mac.max_link_up_time; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msec_delay(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ switch (links_reg & IXGBE_LINKS_SPEED_82599) {
+ case IXGBE_LINKS_SPEED_10G_82599:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ if (hw->mac.type >= ixgbe_mac_X550) {
+ if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
+ *speed = IXGBE_LINK_SPEED_2_5GB_FULL;
+ }
+ break;
+ case IXGBE_LINKS_SPEED_1G_82599:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ case IXGBE_LINKS_SPEED_100_82599:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ if (hw->mac.type >= ixgbe_mac_X550) {
+ if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
+ *speed = IXGBE_LINK_SPEED_5GB_FULL;
+ }
+ break;
+ default:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
+ * the EEPROM
+ * @hw: pointer to hardware structure
+ * @wwnn_prefix: the alternative WWNN prefix
+ * @wwpn_prefix: the alternative WWPN prefix
+ *
+ * This function will read the EEPROM from the alternative SAN MAC address
+ * block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+ u16 *wwpn_prefix)
+{
+ u16 offset, caps;
+ u16 alt_san_mac_blk_offset;
+
+ DEBUGFUNC("ixgbe_get_wwn_prefix_generic");
+
+ /* clear output first */
+ *wwnn_prefix = 0xFFFF;
+ *wwpn_prefix = 0xFFFF;
+
+ /* check if alternative SAN MAC is supported */
+ offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR;
+ if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset))
+ goto wwn_prefix_err;
+
+ if ((alt_san_mac_blk_offset == 0) ||
+ (alt_san_mac_blk_offset == 0xFFFF))
+ goto wwn_prefix_out;
+
+ /* check capability in alternative san mac address block */
+ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+ if (hw->eeprom.ops.read(hw, offset, &caps))
+ goto wwn_prefix_err;
+ if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+ goto wwn_prefix_out;
+
+ /* get the corresponding prefix for WWNN/WWPN */
+ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+ if (hw->eeprom.ops.read(hw, offset, wwnn_prefix)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", offset);
+ }
+
+ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+ if (hw->eeprom.ops.read(hw, offset, wwpn_prefix))
+ goto wwn_prefix_err;
+
+wwn_prefix_out:
+ return IXGBE_SUCCESS;
+
+wwn_prefix_err:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", offset);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM
+ * @hw: pointer to hardware structure
+ * @bs: the fcoe boot status
+ *
+ * This function will read the FCOE boot status from the iSCSI FCOE block
+ **/
+s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs)
+{
+ u16 offset, caps, flags;
+ s32 status;
+
+ DEBUGFUNC("ixgbe_get_fcoe_boot_status_generic");
+
+ /* clear output first */
+ *bs = ixgbe_fcoe_bootstatus_unavailable;
+
+ /* check if FCOE IBA block is present */
+ offset = IXGBE_FCOE_IBA_CAPS_BLK_PTR;
+ status = hw->eeprom.ops.read(hw, offset, &caps);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if (!(caps & IXGBE_FCOE_IBA_CAPS_FCOE))
+ goto out;
+
+ /* check if iSCSI FCOE block is populated */
+ status = hw->eeprom.ops.read(hw, IXGBE_ISCSI_FCOE_BLK_PTR, &offset);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if ((offset == 0) || (offset == 0xFFFF))
+ goto out;
+
+ /* read fcoe flags in iSCSI FCOE block */
+ offset = offset + IXGBE_ISCSI_FCOE_FLAGS_OFFSET;
+ status = hw->eeprom.ops.read(hw, offset, &flags);
+ if (status != IXGBE_SUCCESS)
+ goto out;
+
+ if (flags & IXGBE_ISCSI_FCOE_FLAGS_ENABLE)
+ *bs = ixgbe_fcoe_bootstatus_enabled;
+ else
+ *bs = ixgbe_fcoe_bootstatus_disabled;
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for anti-spoofing
+ * @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ *
+ **/
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+{
+ int j;
+ int pf_target_reg = pf >> 3;
+ int pf_target_shift = pf % 8;
+ u32 pfvfspoof = 0;
+
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
+ if (enable)
+ pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
+
+ /*
+ * PFVFSPOOF register array is size 8 with 8 bits assigned to
+ * MAC anti-spoof enables in each register array element.
+ */
+ for (j = 0; j < pf_target_reg; j++)
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+ /*
+ * The PF should be allowed to spoof so that it can support
+ * emulation mode NICs. Do not set the bits assigned to the PF
+ */
+ pfvfspoof &= (1 << pf_target_shift) - 1;
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+ /*
+ * Remaining pools belong to the PF so they do not need to have
+ * anti-spoofing enabled.
+ */
+ for (j++; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), 0);
+}
+
+/**
+ * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for VLAN anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ *
+ **/
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+ int vf_target_reg = vf >> 3;
+ int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
+ u32 pfvfspoof;
+
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
+ pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+ if (enable)
+ pfvfspoof |= (1 << vf_target_shift);
+ else
+ pfvfspoof &= ~(1 << vf_target_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/**
+ * ixgbe_get_device_caps_generic - Get additional device capabilities
+ * @hw: pointer to hardware structure
+ * @device_caps: the EEPROM word with the extra device capabilities
+ *
+ * This function will read the EEPROM location for the device capabilities,
+ * and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
+{
+ DEBUGFUNC("ixgbe_get_device_caps_generic");
+
+ hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_enable_relaxed_ordering_gen2 - Enable relaxed ordering
+ * @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw)
+{
+ u32 regval;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_enable_relaxed_ordering_gen2");
+
+ /* Enable relaxed ordering */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+ regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+ }
+
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+}
+
+/**
+ * ixgbe_calculate_checksum - Calculate checksum for buffer
+ * @buffer: pointer to EEPROM
+ * @length: size of EEPROM to calculate a checksum for
+ * Calculates the checksum for some buffer on a specified length. The
+ * checksum calculated is returned.
+ **/
+u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
+{
+ u32 i;
+ u8 sum = 0;
+
+ DEBUGFUNC("ixgbe_calculate_checksum");
+
+ if (!buffer)
+ return 0;
+
+ for (i = 0; i < length; i++)
+ sum += buffer[i];
+
+ return (u8) (0 - sum);
+}
+
+/**
+ * ixgbe_host_interface_command - Issue command to manageability block
+ * @hw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
+ *
+ * Communicates with the manageability block. On success return IXGBE_SUCCESS
+ * else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data)
+{
+ u32 hicr, i, bi, fwsts;
+ u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+ u16 buf_len;
+ u16 dword_len;
+
+ DEBUGFUNC("ixgbe_host_interface_command");
+
+ if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+ /* Set bit 9 of FWSTS clearing FW reset indication */
+ fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
+ IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI);
+
+ /* Check that the host interface is enabled. */
+ hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+ if ((hicr & IXGBE_HICR_EN) == 0) {
+ DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ /* Calculate length in DWORDs. We must be DWORD aligned */
+ if ((length % (sizeof(u32))) != 0) {
+ DEBUGOUT("Buffer length failure, not aligned to dword");
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ dword_len = length >> 2;
+
+ /* The device driver writes the relevant command block
+ * into the ram area.
+ */
+ for (i = 0; i < dword_len; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+ i, IXGBE_CPU_TO_LE32(buffer[i]));
+
+ /* Setting this bit tells the ARC that a new command is pending. */
+ IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
+
+ for (i = 0; i < timeout; i++) {
+ hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+ if (!(hicr & IXGBE_HICR_C))
+ break;
+ msec_delay(1);
+ }
+
+ /* Check command completion */
+ if ((timeout != 0 && i == timeout) ||
+ !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
+ ERROR_REPORT1(IXGBE_ERROR_CAUTION,
+ "Command has failed with no status valid.\n");
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ if (!return_data)
+ return 0;
+
+ /* Calculate length in DWORDs */
+ dword_len = hdr_size >> 2;
+
+ /* first pull in the header so we know the buffer length */
+ for (bi = 0; bi < dword_len; bi++) {
+ buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+ IXGBE_LE32_TO_CPUS(&buffer[bi]);
+ }
+
+ /* If there is any thing in data position pull it in */
+ buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
+ if (buf_len == 0)
+ return 0;
+
+ if (length < buf_len + hdr_size) {
+ DEBUGOUT("Buffer not large enough for reply message.\n");
+ return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ /* Calculate length in DWORDs, add 3 for odd lengths */
+ dword_len = (buf_len + 3) >> 2;
+
+ /* Pull in the rest of the buffer (bi is where we left off) */
+ for (; bi <= dword_len; bi++) {
+ buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+ IXGBE_LE32_TO_CPUS(&buffer[bi]);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
+ * @hw: pointer to the HW structure
+ * @maj: driver version major number
+ * @min: driver version minor number
+ * @build: driver version build number
+ * @sub: driver version sub build number
+ *
+ * Sends driver version number to firmware through the manageability
+ * block. On success return IXGBE_SUCCESS
+ * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+ u8 build, u8 sub)
+{
+ struct ixgbe_hic_drv_info fw_cmd;
+ int i;
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM)
+ != IXGBE_SUCCESS) {
+ ret_val = IXGBE_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
+ fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
+ fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+ fw_cmd.port_num = (u8)hw->bus.func;
+ fw_cmd.ver_maj = maj;
+ fw_cmd.ver_min = min;
+ fw_cmd.ver_build = build;
+ fw_cmd.ver_sub = sub;
+ fw_cmd.hdr.checksum = 0;
+ fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+ (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
+ fw_cmd.pad = 0;
+ fw_cmd.pad2 = 0;
+
+ for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+ ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+ sizeof(fw_cmd),
+ IXGBE_HI_COMMAND_TIMEOUT,
+ true);
+ if (ret_val != IXGBE_SUCCESS)
+ continue;
+
+ if (fw_cmd.hdr.cmd_or_resp.ret_status ==
+ FW_CEM_RESP_STATUS_SUCCESS)
+ ret_val = IXGBE_SUCCESS;
+ else
+ ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+
+ break;
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_set_rxpba_generic - Initialize Rx packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom,
+ int strategy)
+{
+ u32 pbsize = hw->mac.rx_pb_size;
+ int i = 0;
+ u32 rxpktsize, txpktsize, txpbthresh;
+
+ /* Reserve headroom */
+ pbsize -= headroom;
+
+ if (!num_pb)
+ num_pb = 1;
+
+ /* Divide remaining packet buffer space amongst the number of packet
+ * buffers requested using supplied strategy.
+ */
+ switch (strategy) {
+ case PBA_STRATEGY_WEIGHTED:
+ /* ixgbe_dcb_pba_80_48 strategy weight first half of packet
+ * buffer with 5/8 of the packet buffer space.
+ */
+ rxpktsize = (pbsize * 5) / (num_pb * 4);
+ pbsize -= rxpktsize * (num_pb / 2);
+ rxpktsize <<= IXGBE_RXPBSIZE_SHIFT;
+ for (; i < (num_pb / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ /* Fall through to configure remaining packet buffers */
+ case PBA_STRATEGY_EQUAL:
+ rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
+ for (; i < num_pb; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ break;
+ default:
+ break;
+ }
+
+ /* Only support an equally distributed Tx packet buffer strategy. */
+ txpktsize = IXGBE_TXPBSIZE_MAX / num_pb;
+ txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
+ for (i = 0; i < num_pb; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
+ }
+
+ /* Clear unused TCs, if any, to zero buffer size*/
+ for (; i < IXGBE_MAX_PB; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
+ }
+}
+
+/**
+ * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo
+ * @hw: pointer to the hardware structure
+ *
+ * The 82599 and x540 MACs can experience issues if TX work is still pending
+ * when a reset occurs. This function prevents this by flushing the PCIe
+ * buffers on the system.
+ **/
+void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
+{
+ u32 gcr_ext, hlreg0, i, poll;
+ u16 value;
+
+ /*
+ * If double reset is not requested then all transactions should
+ * already be clear and as such there is no work to do
+ */
+ if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED))
+ return;
+
+ /*
+ * Set loopback enable to prevent any transmits from being sent
+ * should the link come up. This assumes that the RXCTRL.RXEN bit
+ * has already been cleared.
+ */
+ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK);
+
+ /* Wait for a last completion before clearing buffers */
+ IXGBE_WRITE_FLUSH(hw);
+ msec_delay(3);
+
+ /*
+ * Before proceeding, make sure that the PCIe block does not have
+ * transactions pending.
+ */
+ poll = ixgbe_pcie_timeout_poll(hw);
+ for (i = 0; i < poll; i++) {
+ usec_delay(100);
+ value = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS);
+ if (IXGBE_REMOVED(hw->hw_addr))
+ goto out;
+ if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
+ goto out;
+ }
+
+out:
+ /* initiate cleaning flow for buffers in the PCIe transaction layer */
+ gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+ IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT,
+ gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR);
+
+ /* Flush all writes and allow 20usec for all transactions to clear */
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(20);
+
+ /* restore previous register values */
+ IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+}
+
+STATIC const u8 ixgbe_emc_temp_data[4] = {
+ IXGBE_EMC_INTERNAL_DATA,
+ IXGBE_EMC_DIODE1_DATA,
+ IXGBE_EMC_DIODE2_DATA,
+ IXGBE_EMC_DIODE3_DATA
+};
+STATIC const u8 ixgbe_emc_therm_limit[4] = {
+ IXGBE_EMC_INTERNAL_THERM_LIMIT,
+ IXGBE_EMC_DIODE1_THERM_LIMIT,
+ IXGBE_EMC_DIODE2_THERM_LIMIT,
+ IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ * @data: pointer to the thermal sensor data structure
+ *
+ * Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ DEBUGFUNC("ixgbe_get_thermal_sensor_data_generic");
+
+ /* Only support thermal sensors attached to 82599 physical port 0 */
+ if ((hw->mac.type != ixgbe_mac_82599EB) ||
+ (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset);
+ if (status)
+ goto out;
+
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ status = hw->eeprom.ops.read(hw, ets_offset, &ets_cfg);
+ if (status)
+ goto out;
+
+ if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+ != IXGBE_ETS_TYPE_EMC) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > IXGBE_MAX_SENSORS)
+ num_sensors = IXGBE_MAX_SENSORS;
+
+ for (i = 0; i < num_sensors; i++) {
+ status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+ &ets_sensor);
+ if (status)
+ goto out;
+
+ sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+ IXGBE_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+ IXGBE_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0) {
+ status = hw->phy.ops.read_i2c_byte(hw,
+ ixgbe_emc_temp_data[sensor_index],
+ IXGBE_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ if (status)
+ goto out;
+ }
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 offset;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ DEBUGFUNC("ixgbe_init_thermal_sensor_thresh_generic");
+
+ memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+ /* Only support thermal sensors attached to 82599 physical port 0 */
+ if ((hw->mac.type != ixgbe_mac_82599EB) ||
+ (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1))
+ return IXGBE_NOT_IMPLEMENTED;
+
+ offset = IXGBE_ETS_CFG;
+ if (hw->eeprom.ops.read(hw, offset, &ets_offset))
+ goto eeprom_err;
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return IXGBE_NOT_IMPLEMENTED;
+
+ offset = ets_offset;
+ if (hw->eeprom.ops.read(hw, offset, &ets_cfg))
+ goto eeprom_err;
+ if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+ != IXGBE_ETS_TYPE_EMC)
+ return IXGBE_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+ IXGBE_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+
+ for (i = 0; i < num_sensors; i++) {
+ offset = ets_offset + 1 + i;
+ if (hw->eeprom.ops.read(hw, offset, &ets_sensor)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ offset);
+ continue;
+ }
+ sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+ IXGBE_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+ IXGBE_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ ixgbe_emc_therm_limit[sensor_index],
+ IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+ if ((i < IXGBE_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return status;
+
+eeprom_err:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", offset);
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
+
+/**
+ * ixgbe_dcb_get_rtrup2tc_generic - read rtrup2tc reg
+ * @hw: pointer to hardware structure
+ * @map: pointer to u8 arr for returning map
+ *
+ * Read the rtrup2tc HW register and resolve its content into map
+ **/
+void ixgbe_dcb_get_rtrup2tc_generic(struct ixgbe_hw *hw, u8 *map)
+{
+ u32 reg, i;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
+ for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++)
+ map[i] = IXGBE_RTRUP2TC_UP_MASK &
+ (reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT));
+ return;
+}
+
+void ixgbe_disable_rx_generic(struct ixgbe_hw *hw)
+{
+ u32 pfdtxgswc;
+ u32 rxctrl;
+
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (rxctrl & IXGBE_RXCTRL_RXEN) {
+ if (hw->mac.type != ixgbe_mac_82598EB) {
+ pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+ if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+ pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+ hw->mac.set_lben = true;
+ } else {
+ hw->mac.set_lben = false;
+ }
+ }
+ rxctrl &= ~IXGBE_RXCTRL_RXEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+ }
+}
+
+void ixgbe_enable_rx_generic(struct ixgbe_hw *hw)
+{
+ u32 pfdtxgswc;
+ u32 rxctrl;
+
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, (rxctrl | IXGBE_RXCTRL_RXEN));
+
+ if (hw->mac.type != ixgbe_mac_82598EB) {
+ if (hw->mac.set_lben) {
+ pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+ pfdtxgswc |= IXGBE_PFDTXGSWC_VT_LBEN;
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+ hw->mac.set_lben = false;
+ }
+ }
+}
+
+/**
+ * ixgbe_mng_present - returns true when management capability is present
+ * @hw: pointer to hardware structure
+ */
+bool ixgbe_mng_present(struct ixgbe_hw *hw)
+{
+ u32 fwsm;
+
+ if (hw->mac.type < ixgbe_mac_82599EB)
+ return false;
+
+ fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+ fwsm &= IXGBE_FWSM_MODE_MASK;
+ return fwsm == IXGBE_FWSM_FW_MODE_PT;
+}
+
+/**
+ * ixgbe_mng_enabled - Is the manageability engine enabled?
+ * @hw: pointer to hardware structure
+ *
+ * Returns true if the manageability engine is enabled.
+ **/
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
+{
+ u32 fwsm, manc, factps;
+
+ fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+ if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
+ return false;
+
+ manc = IXGBE_READ_REG(hw, IXGBE_MANC);
+ if (!(manc & IXGBE_MANC_RCV_TCO_EN))
+ return false;
+
+ if (hw->mac.type <= ixgbe_mac_X540) {
+ factps = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+ if (factps & IXGBE_FACTPS_MNGCG)
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the MAC and/or PHY register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ s32 status = IXGBE_SUCCESS;
+ u32 speedcnt = 0;
+ u32 i = 0;
+ bool autoneg, link_up = false;
+
+ DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber");
+
+ /* Mask off requested but non-supported speeds */
+ status = ixgbe_get_link_capabilities(hw, &link_speed, &autoneg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ speed &= link_speed;
+
+ /* Try each speed one by one, highest priority first. We do this in
+ * software because 10Gb fiber doesn't support speed autonegotiation.
+ */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ speedcnt++;
+ highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /* If we already have link at this speed, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+ goto out;
+
+ /* Set the module link speed */
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber:
+ ixgbe_set_rate_select_speed(hw,
+ IXGBE_LINK_SPEED_10GB_FULL);
+ break;
+ case ixgbe_media_type_fiber_qsfp:
+ /* QSFP module automatically detects MAC link speed */
+ break;
+ default:
+ DEBUGOUT("Unexpected media type.\n");
+ break;
+ }
+
+ /* Allow module to change analog characteristics (1G->10G) */
+ msec_delay(40);
+
+ status = ixgbe_setup_mac_link(hw,
+ IXGBE_LINK_SPEED_10GB_FULL,
+ autoneg_wait_to_complete);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Flap the Tx laser if it has not already been done */
+ ixgbe_flap_tx_laser(hw);
+
+ /* Wait for the controller to acquire link. Per IEEE 802.3ap,
+ * Section 73.10.2, we may have to wait up to 500ms if KR is
+ * attempted. 82599 uses the same timing for 10g SFI.
+ */
+ for (i = 0; i < 5; i++) {
+ /* Wait for the link partner to also set speed */
+ msec_delay(100);
+
+ /* If we have link, just jump out */
+ status = ixgbe_check_link(hw, &link_speed,
+ &link_up, false);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (link_up)
+ goto out;
+ }
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ speedcnt++;
+ if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
+ highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* If we already have link at this speed, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+ goto out;
+
+ /* Set the module link speed */
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber:
+ ixgbe_set_rate_select_speed(hw,
+ IXGBE_LINK_SPEED_1GB_FULL);
+ break;
+ case ixgbe_media_type_fiber_qsfp:
+ /* QSFP module automatically detects link speed */
+ break;
+ default:
+ DEBUGOUT("Unexpected media type.\n");
+ break;
+ }
+
+ /* Allow module to change analog characteristics (10G->1G) */
+ msec_delay(40);
+
+ status = ixgbe_setup_mac_link(hw,
+ IXGBE_LINK_SPEED_1GB_FULL,
+ autoneg_wait_to_complete);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Flap the Tx laser if it has not already been done */
+ ixgbe_flap_tx_laser(hw);
+
+ /* Wait for the link partner to also set speed */
+ msec_delay(100);
+
+ /* If we have link, just jump out */
+ status = ixgbe_check_link(hw, &link_speed, &link_up, false);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (link_up)
+ goto out;
+ }
+
+ /* We didn't get link. Configure back to the highest speed we tried,
+ * (if there was more than one). We call ourselves back with just the
+ * single highest speed that the user requested.
+ */
+ if (speedcnt > 1)
+ status = ixgbe_setup_mac_link_multispeed_fiber(hw,
+ highest_link_speed,
+ autoneg_wait_to_complete);
+
+out:
+ /* Set autoneg_advertised value based on input link speed */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ return status;
+}
+
+/**
+ * ixgbe_set_soft_rate_select_speed - Set module link speed
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
+ *
+ * Set module link speed via the soft rate select.
+ */
+void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed)
+{
+ s32 status;
+ u8 rs, eeprom_data;
+
+ switch (speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ /* one bit mask same as setting on */
+ rs = IXGBE_SFF_SOFT_RS_SELECT_10G;
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
+ break;
+ default:
+ DEBUGOUT("Invalid fixed module speed\n");
+ return;
+ }
+
+ /* Set RS0 */
+ status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ &eeprom_data);
+ if (status) {
+ DEBUGOUT("Failed to read Rx Rate Select RS0\n");
+ goto out;
+ }
+
+ eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs;
+
+ status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ eeprom_data);
+ if (status) {
+ DEBUGOUT("Failed to write Rx Rate Select RS0\n");
+ goto out;
+ }
+
+ /* Set RS1 */
+ status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ &eeprom_data);
+ if (status) {
+ DEBUGOUT("Failed to read Rx Rate Select RS1\n");
+ goto out;
+ }
+
+ eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs;
+
+ status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ eeprom_data);
+ if (status) {
+ DEBUGOUT("Failed to write Rx Rate Select RS1\n");
+ goto out;
+ }
+out:
+ return;
+}
new file mode 100644
@@ -0,0 +1,188 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_COMMON_H_
+#define _IXGBE_COMMON_H_
+
+#include "ixgbe_type.h"
+#define IXGBE_WRITE_REG64(hw, reg, value) \
+ do { \
+ IXGBE_WRITE_REG(hw, reg, (u32) value); \
+ IXGBE_WRITE_REG(hw, reg + 4, (u32) (value >> 32)); \
+ } while (0)
+#define IXGBE_REMOVED(a) (0)
+struct ixgbe_pba {
+ u16 word[2];
+ u16 *pba_block;
+};
+
+void ixgbe_dcb_get_rtrup2tc_generic(struct ixgbe_hw *hw, u8 *map);
+
+u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num);
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+ u32 pba_num_size);
+s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+ u32 eeprom_buf_size, u16 max_pba_block_size,
+ struct ixgbe_pba *pba);
+s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
+ u32 eeprom_buf_size, struct ixgbe_pba *pba);
+s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf,
+ u32 eeprom_buf_size, u16 *pba_block_size);
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status);
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data);
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+ u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
+
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count,
+ ixgbe_mc_addr_itr func, bool clear);
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
+ u32 addr_count, ixgbe_mc_addr_itr func);
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
+s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw);
+bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
+void ixgbe_fc_autoneg(struct ixgbe_hw *hw);
+s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_validate_mac_addr(u8 *mac_addr);
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
+
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *, u32 *reg_val);
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked);
+
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
+
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq);
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan,
+ u32 vind, bool vlan_on);
+s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on, bool *vfta_changed);
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
+s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan);
+
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+ u16 *wwpn_prefix);
+
+s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs);
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom,
+ int strategy);
+void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw);
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+ u8 build, u8 ver);
+u8 ixgbe_calculate_checksum(u8 *buffer, u32 length);
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data);
+
+void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
+
+extern s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
+extern void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
+bool ixgbe_mng_present(struct ixgbe_hw *hw);
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw);
+
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define IXGBE_EMC_INTERNAL_DATA 0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA 0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
+#define IXGBE_EMC_DIODE2_DATA 0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
+#define IXGBE_EMC_DIODE3_DATA 0x2A
+#define IXGBE_EMC_DIODE3_THERM_LIMIT 0x30
+
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
+void ixgbe_disable_rx_generic(struct ixgbe_hw *hw);
+void ixgbe_enable_rx_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed);
+#endif /* IXGBE_COMMON */
new file mode 100644
@@ -0,0 +1,714 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_dcb_calculate_tc_credits - This calculates the ieee traffic class
+ * credits from the configured bandwidth percentages. Credits
+ * are the smallest unit programmable into the underlying
+ * hardware. The IEEE 802.1Qaz specification do not use bandwidth
+ * groups so this is much simplified from the CEE case.
+ */
+s32 ixgbe_dcb_calculate_tc_credits(u8 *bw, u16 *refill, u16 *max,
+ int max_frame_size)
+{
+ int min_percent = 100;
+ int min_credit, multiplier;
+ int i;
+
+ min_credit = ((max_frame_size / 2) + IXGBE_DCB_CREDIT_QUANTUM - 1) /
+ IXGBE_DCB_CREDIT_QUANTUM;
+
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if (bw[i] < min_percent && bw[i])
+ min_percent = bw[i];
+ }
+
+ multiplier = (min_credit / min_percent) + 1;
+
+ /* Find out the hw credits for each TC */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ int val = min(bw[i] * multiplier, IXGBE_DCB_MAX_CREDIT_REFILL);
+
+ if (val < min_credit)
+ val = min_credit;
+ refill[i] = (u16)val;
+
+ max[i] = bw[i] ? (bw[i]*IXGBE_DCB_MAX_CREDIT)/100 : min_credit;
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_calculate_tc_credits_cee - Calculates traffic class credits
+ * @ixgbe_dcb_config: Struct containing DCB settings.
+ * @direction: Configuring either Tx or Rx.
+ *
+ * This function calculates the credits allocated to each traffic class.
+ * It should be called only after the rules are checked by
+ * ixgbe_dcb_check_config_cee().
+ */
+s32 ixgbe_dcb_calculate_tc_credits_cee(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config,
+ u32 max_frame_size, u8 direction)
+{
+ struct ixgbe_dcb_tc_path *p;
+ u32 min_multiplier = 0;
+ u16 min_percent = 100;
+ s32 ret_val = IXGBE_SUCCESS;
+ /* Initialization values default for Tx settings */
+ u32 min_credit = 0;
+ u32 credit_refill = 0;
+ u32 credit_max = 0;
+ u16 link_percentage = 0;
+ u8 bw_percent = 0;
+ u8 i;
+
+ if (dcb_config == NULL) {
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ }
+
+ min_credit = ((max_frame_size / 2) + IXGBE_DCB_CREDIT_QUANTUM - 1) /
+ IXGBE_DCB_CREDIT_QUANTUM;
+
+ /* Find smallest link percentage */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ p = &dcb_config->tc_config[i].path[direction];
+ bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+ link_percentage = p->bwg_percent;
+
+ link_percentage = (link_percentage * bw_percent) / 100;
+
+ if (link_percentage && link_percentage < min_percent)
+ min_percent = link_percentage;
+ }
+
+ /*
+ * The ratio between traffic classes will control the bandwidth
+ * percentages seen on the wire. To calculate this ratio we use
+ * a multiplier. It is required that the refill credits must be
+ * larger than the max frame size so here we find the smallest
+ * multiplier that will allow all bandwidth percentages to be
+ * greater than the max frame size.
+ */
+ min_multiplier = (min_credit / min_percent) + 1;
+
+ /* Find out the link percentage for each TC first */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ p = &dcb_config->tc_config[i].path[direction];
+ bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+
+ link_percentage = p->bwg_percent;
+ /* Must be careful of integer division for very small nums */
+ link_percentage = (link_percentage * bw_percent) / 100;
+ if (p->bwg_percent > 0 && link_percentage == 0)
+ link_percentage = 1;
+
+ /* Save link_percentage for reference */
+ p->link_percent = (u8)link_percentage;
+
+ /* Calculate credit refill ratio using multiplier */
+ credit_refill = min(link_percentage * min_multiplier,
+ (u32)IXGBE_DCB_MAX_CREDIT_REFILL);
+ p->data_credits_refill = (u16)credit_refill;
+
+ /* Calculate maximum credit for the TC */
+ credit_max = (link_percentage * IXGBE_DCB_MAX_CREDIT) / 100;
+
+ /*
+ * Adjustment based on rule checking, if the percentage
+ * of a TC is too small, the maximum credit may not be
+ * enough to send out a jumbo frame in data plane arbitration.
+ */
+ if (credit_max && (credit_max < min_credit))
+ credit_max = min_credit;
+
+ if (direction == IXGBE_DCB_TX_CONFIG) {
+ /*
+ * Adjustment based on rule checking, if the
+ * percentage of a TC is too small, the maximum
+ * credit may not be enough to send out a TSO
+ * packet in descriptor plane arbitration.
+ */
+ if (credit_max && (credit_max <
+ IXGBE_DCB_MIN_TSO_CREDIT)
+ && (hw->mac.type == ixgbe_mac_82598EB))
+ credit_max = IXGBE_DCB_MIN_TSO_CREDIT;
+
+ dcb_config->tc_config[i].desc_credits_max =
+ (u16)credit_max;
+ }
+
+ p->data_credits_max = (u16)credit_max;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_dcb_unpack_pfc_cee - Unpack dcb_config PFC info
+ * @cfg: dcb configuration to unpack into hardware consumable fields
+ * @map: user priority to traffic class map
+ * @pfc_up: u8 to store user priority PFC bitmask
+ *
+ * This unpacks the dcb configuration PFC info which is stored per
+ * traffic class into a 8bit user priority bitmask that can be
+ * consumed by hardware routines. The priority to tc map must be
+ * updated before calling this routine to use current up-to maps.
+ */
+void ixgbe_dcb_unpack_pfc_cee(struct ixgbe_dcb_config *cfg, u8 *map, u8 *pfc_up)
+{
+ struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+ int up;
+
+ /*
+ * If the TC for this user priority has PFC enabled then set the
+ * matching bit in 'pfc_up' to reflect that PFC is enabled.
+ */
+ for (*pfc_up = 0, up = 0; up < IXGBE_DCB_MAX_USER_PRIORITY; up++) {
+ if (tc_config[map[up]].pfc != ixgbe_dcb_pfc_disabled)
+ *pfc_up |= 1 << up;
+ }
+}
+
+void ixgbe_dcb_unpack_refill_cee(struct ixgbe_dcb_config *cfg, int direction,
+ u16 *refill)
+{
+ struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+ int tc;
+
+ for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+ refill[tc] = tc_config[tc].path[direction].data_credits_refill;
+}
+
+void ixgbe_dcb_unpack_max_cee(struct ixgbe_dcb_config *cfg, u16 *max)
+{
+ struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+ int tc;
+
+ for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+ max[tc] = tc_config[tc].desc_credits_max;
+}
+
+void ixgbe_dcb_unpack_bwgid_cee(struct ixgbe_dcb_config *cfg, int direction,
+ u8 *bwgid)
+{
+ struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+ int tc;
+
+ for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+ bwgid[tc] = tc_config[tc].path[direction].bwg_id;
+}
+
+void ixgbe_dcb_unpack_tsa_cee(struct ixgbe_dcb_config *cfg, int direction,
+ u8 *tsa)
+{
+ struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+ int tc;
+
+ for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++)
+ tsa[tc] = tc_config[tc].path[direction].tsa;
+}
+
+u8 ixgbe_dcb_get_tc_from_up(struct ixgbe_dcb_config *cfg, int direction, u8 up)
+{
+ struct ixgbe_dcb_tc_config *tc_config = &cfg->tc_config[0];
+ u8 prio_mask = 1 << up;
+ u8 tc = cfg->num_tcs.pg_tcs;
+
+ /* If tc is 0 then DCB is likely not enabled or supported */
+ if (!tc)
+ goto out;
+
+ /*
+ * Test from maximum TC to 1 and report the first match we find. If
+ * we find no match we can assume that the TC is 0 since the TC must
+ * be set for all user priorities
+ */
+ for (tc--; tc; tc--) {
+ if (prio_mask & tc_config[tc].path[direction].up_to_tc_bitmap)
+ break;
+ }
+out:
+ return tc;
+}
+
+void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *cfg, int direction,
+ u8 *map)
+{
+ u8 up;
+
+ for (up = 0; up < IXGBE_DCB_MAX_USER_PRIORITY; up++)
+ map[up] = ixgbe_dcb_get_tc_from_up(cfg, direction, up);
+}
+
+/**
+ * ixgbe_dcb_config - Struct containing DCB settings.
+ * @dcb_config: Pointer to DCB config structure
+ *
+ * This function checks DCB rules for DCB settings.
+ * The following rules are checked:
+ * 1. The sum of bandwidth percentages of all Bandwidth Groups must total 100%.
+ * 2. The sum of bandwidth percentages of all Traffic Classes within a Bandwidth
+ * Group must total 100.
+ * 3. A Traffic Class should not be set to both Link Strict Priority
+ * and Group Strict Priority.
+ * 4. Link strict Bandwidth Groups can only have link strict traffic classes
+ * with zero bandwidth.
+ */
+s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *dcb_config)
+{
+ struct ixgbe_dcb_tc_path *p;
+ s32 ret_val = IXGBE_SUCCESS;
+ u8 i, j, bw = 0, bw_id;
+ u8 bw_sum[2][IXGBE_DCB_MAX_BW_GROUP];
+ bool link_strict[2][IXGBE_DCB_MAX_BW_GROUP];
+
+ memset(bw_sum, 0, sizeof(bw_sum));
+ memset(link_strict, 0, sizeof(link_strict));
+
+ /* First Tx, then Rx */
+ for (i = 0; i < 2; i++) {
+ /* Check each traffic class for rule violation */
+ for (j = 0; j < IXGBE_DCB_MAX_TRAFFIC_CLASS; j++) {
+ p = &dcb_config->tc_config[j].path[i];
+
+ bw = p->bwg_percent;
+ bw_id = p->bwg_id;
+
+ if (bw_id >= IXGBE_DCB_MAX_BW_GROUP) {
+ ret_val = IXGBE_ERR_CONFIG;
+ goto err_config;
+ }
+ if (p->tsa == ixgbe_dcb_tsa_strict) {
+ link_strict[i][bw_id] = true;
+ /* Link strict should have zero bandwidth */
+ if (bw) {
+ ret_val = IXGBE_ERR_CONFIG;
+ goto err_config;
+ }
+ } else if (!bw) {
+ /*
+ * Traffic classes without link strict
+ * should have non-zero bandwidth.
+ */
+ ret_val = IXGBE_ERR_CONFIG;
+ goto err_config;
+ }
+ bw_sum[i][bw_id] += bw;
+ }
+
+ bw = 0;
+
+ /* Check each bandwidth group for rule violation */
+ for (j = 0; j < IXGBE_DCB_MAX_BW_GROUP; j++) {
+ bw += dcb_config->bw_percentage[i][j];
+ /*
+ * Sum of bandwidth percentages of all traffic classes
+ * within a Bandwidth Group must total 100 except for
+ * link strict group (zero bandwidth).
+ */
+ if (link_strict[i][j]) {
+ if (bw_sum[i][j]) {
+ /*
+ * Link strict group should have zero
+ * bandwidth.
+ */
+ ret_val = IXGBE_ERR_CONFIG;
+ goto err_config;
+ }
+ } else if (bw_sum[i][j] != IXGBE_DCB_BW_PERCENT &&
+ bw_sum[i][j] != 0) {
+ ret_val = IXGBE_ERR_CONFIG;
+ goto err_config;
+ }
+ }
+
+ if (bw != IXGBE_DCB_BW_PERCENT) {
+ ret_val = IXGBE_ERR_CONFIG;
+ goto err_config;
+ }
+ }
+
+err_config:
+ DEBUGOUT2("DCB error code %d while checking %s settings.\n",
+ ret_val, (i == IXGBE_DCB_TX_CONFIG) ? "Tx" : "Rx");
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_dcb_get_tc_stats - Returns status of each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count: Number of elements in bwg_array.
+ *
+ * This function returns the status data for each of the Traffic Classes in use.
+ */
+s32 ixgbe_dcb_get_tc_stats(struct ixgbe_hw *hw, struct ixgbe_hw_stats *stats,
+ u8 tc_count)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_get_tc_stats_82598(hw, stats, tc_count);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_get_tc_stats_82599(hw, stats, tc_count);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/**
+ * ixgbe_dcb_get_pfc_stats - Returns CBFC status of each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count: Number of elements in bwg_array.
+ *
+ * This function returns the CBFC status data for each of the Traffic Classes.
+ */
+s32 ixgbe_dcb_get_pfc_stats(struct ixgbe_hw *hw, struct ixgbe_hw_stats *stats,
+ u8 tc_count)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_get_pfc_stats_82598(hw, stats, tc_count);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_get_pfc_stats_82599(hw, stats, tc_count);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_cee - Config Rx arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_cee(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS] = { 0 };
+ u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS] = { 0 };
+ u8 map[IXGBE_DCB_MAX_USER_PRIORITY] = { 0 };
+ u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS] = { 0 };
+ u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS] = { 0 };
+
+ ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+ ixgbe_dcb_unpack_max_cee(dcb_config, max);
+ ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+ ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+ ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, tsa);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwgid,
+ tsa, map);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_cee - Config Tx Desc arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_cee(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+
+ ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+ ixgbe_dcb_unpack_max_cee(dcb_config, max);
+ ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+ ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
+ bwgid, tsa);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
+ bwgid, tsa);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_cee - Config Tx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_cee(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u8 map[IXGBE_DCB_MAX_USER_PRIORITY] = { 0 };
+ u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+
+ ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+ ixgbe_dcb_unpack_max_cee(dcb_config, max);
+ ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+ ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+ ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
+ bwgid, tsa);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max,
+ bwgid, tsa,
+ map);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_cee - Config priority flow control
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Priority Flow Control for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_cee(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ u8 pfc_en;
+ u8 map[IXGBE_DCB_MAX_USER_PRIORITY] = { 0 };
+
+ ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+ ixgbe_dcb_unpack_pfc_cee(dcb_config, map, &pfc_en);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en, map);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats - Config traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+s32 ixgbe_dcb_config_tc_stats(struct ixgbe_hw *hw)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_config_tc_stats_82598(hw);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_config_tc_stats_82599(hw, NULL);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/**
+ * ixgbe_dcb_hw_config_cee - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_cee(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ s32 ret = IXGBE_NOT_IMPLEMENTED;
+ u8 pfc_en;
+ u8 tsa[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u8 bwgid[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u8 map[IXGBE_DCB_MAX_USER_PRIORITY] = { 0 };
+ u16 refill[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ u16 max[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+
+ /* Unpack CEE standard containers */
+ ixgbe_dcb_unpack_refill_cee(dcb_config, IXGBE_DCB_TX_CONFIG, refill);
+ ixgbe_dcb_unpack_max_cee(dcb_config, max);
+ ixgbe_dcb_unpack_bwgid_cee(dcb_config, IXGBE_DCB_TX_CONFIG, bwgid);
+ ixgbe_dcb_unpack_tsa_cee(dcb_config, IXGBE_DCB_TX_CONFIG, tsa);
+ ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_TX_CONFIG, map);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_hw_config_82598(hw, dcb_config->link_speed,
+ refill, max, bwgid, tsa);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ixgbe_dcb_config_82599(hw, dcb_config);
+ ret = ixgbe_dcb_hw_config_82599(hw, dcb_config->link_speed,
+ refill, max, bwgid,
+ tsa, map);
+
+ ixgbe_dcb_config_tc_stats_82599(hw, dcb_config);
+ break;
+ default:
+ break;
+ }
+
+ if (!ret && dcb_config->pfc_mode_enable) {
+ ixgbe_dcb_unpack_pfc_cee(dcb_config, map, &pfc_en);
+ ret = ixgbe_dcb_config_pfc(hw, pfc_en, map);
+ }
+
+ return ret;
+}
+
+/* Helper routines to abstract HW specifics from DCB netlink ops */
+s32 ixgbe_dcb_config_pfc(struct ixgbe_hw *hw, u8 pfc_en, u8 *map)
+{
+ int ret = IXGBE_ERR_PARAM;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en, map);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw, u16 *refill, u16 *max,
+ u8 *bwg_id, u8 *tsa, u8 *map)
+{
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, tsa);
+ ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, bwg_id,
+ tsa);
+ ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max, bwg_id,
+ tsa);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id,
+ tsa, map);
+ ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max, bwg_id,
+ tsa);
+ ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
+ tsa, map);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,174 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_DCB_H_
+#define _IXGBE_DCB_H_
+
+#include "ixgbe_type.h"
+
+/* DCB defines */
+/* DCB credit calculation defines */
+#define IXGBE_DCB_CREDIT_QUANTUM 64
+#define IXGBE_DCB_MAX_CREDIT_REFILL 200 /* 200 * 64B = 12800B */
+#define IXGBE_DCB_MAX_TSO_SIZE (32 * 1024) /* Max TSO pkt size in DCB*/
+#define IXGBE_DCB_MAX_CREDIT (2 * IXGBE_DCB_MAX_CREDIT_REFILL)
+
+/* 513 for 32KB TSO packet */
+#define IXGBE_DCB_MIN_TSO_CREDIT \
+ ((IXGBE_DCB_MAX_TSO_SIZE / IXGBE_DCB_CREDIT_QUANTUM) + 1)
+
+/* DCB configuration defines */
+#define IXGBE_DCB_MAX_USER_PRIORITY 8
+#define IXGBE_DCB_MAX_BW_GROUP 8
+#define IXGBE_DCB_BW_PERCENT 100
+
+#define IXGBE_DCB_TX_CONFIG 0
+#define IXGBE_DCB_RX_CONFIG 1
+
+/* DCB capability defines */
+#define IXGBE_DCB_PG_SUPPORT 0x00000001
+#define IXGBE_DCB_PFC_SUPPORT 0x00000002
+#define IXGBE_DCB_BCN_SUPPORT 0x00000004
+#define IXGBE_DCB_UP2TC_SUPPORT 0x00000008
+#define IXGBE_DCB_GSP_SUPPORT 0x00000010
+
+struct ixgbe_dcb_support {
+ u32 capabilities; /* DCB capabilities */
+
+ /* Each bit represents a number of TCs configurable in the hw.
+ * If 8 traffic classes can be configured, the value is 0x80. */
+ u8 traffic_classes;
+ u8 pfc_traffic_classes;
+};
+
+enum ixgbe_dcb_tsa {
+ ixgbe_dcb_tsa_ets = 0,
+ ixgbe_dcb_tsa_group_strict_cee,
+ ixgbe_dcb_tsa_strict
+};
+
+/* Traffic class bandwidth allocation per direction */
+struct ixgbe_dcb_tc_path {
+ u8 bwg_id; /* Bandwidth Group (BWG) ID */
+ u8 bwg_percent; /* % of BWG's bandwidth */
+ u8 link_percent; /* % of link bandwidth */
+ u8 up_to_tc_bitmap; /* User Priority to Traffic Class mapping */
+ u16 data_credits_refill; /* Credit refill amount in 64B granularity */
+ u16 data_credits_max; /* Max credits for a configured packet buffer
+ * in 64B granularity.*/
+ enum ixgbe_dcb_tsa tsa; /* Link or Group Strict Priority */
+};
+
+enum ixgbe_dcb_pfc {
+ ixgbe_dcb_pfc_disabled = 0,
+ ixgbe_dcb_pfc_enabled,
+ ixgbe_dcb_pfc_enabled_txonly,
+ ixgbe_dcb_pfc_enabled_rxonly
+};
+
+/* Traffic class configuration */
+struct ixgbe_dcb_tc_config {
+ struct ixgbe_dcb_tc_path path[2]; /* One each for Tx/Rx */
+ enum ixgbe_dcb_pfc pfc; /* Class based flow control setting */
+
+ u16 desc_credits_max; /* For Tx Descriptor arbitration */
+ u8 tc; /* Traffic class (TC) */
+};
+
+enum ixgbe_dcb_pba {
+ /* PBA[0-7] each use 64KB FIFO */
+ ixgbe_dcb_pba_equal = PBA_STRATEGY_EQUAL,
+ /* PBA[0-3] each use 80KB, PBA[4-7] each use 48KB */
+ ixgbe_dcb_pba_80_48 = PBA_STRATEGY_WEIGHTED
+};
+
+struct ixgbe_dcb_num_tcs {
+ u8 pg_tcs;
+ u8 pfc_tcs;
+};
+
+struct ixgbe_dcb_config {
+ struct ixgbe_dcb_tc_config tc_config[IXGBE_DCB_MAX_TRAFFIC_CLASS];
+ struct ixgbe_dcb_support support;
+ struct ixgbe_dcb_num_tcs num_tcs;
+ u8 bw_percentage[2][IXGBE_DCB_MAX_BW_GROUP]; /* One each for Tx/Rx */
+ bool pfc_mode_enable;
+ bool round_robin_enable;
+
+ enum ixgbe_dcb_pba rx_pba_cfg;
+
+ u32 dcb_cfg_version; /* Not used...OS-specific? */
+ u32 link_speed; /* For bandwidth allocation validation purpose */
+ bool vt_mode;
+};
+
+/* DCB driver APIs */
+
+/* DCB rule checking */
+s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *);
+
+/* DCB credits calculation */
+s32 ixgbe_dcb_calculate_tc_credits(u8 *, u16 *, u16 *, int);
+s32 ixgbe_dcb_calculate_tc_credits_cee(struct ixgbe_hw *,
+ struct ixgbe_dcb_config *, u32, u8);
+
+/* DCB PFC */
+s32 ixgbe_dcb_config_pfc(struct ixgbe_hw *, u8, u8 *);
+s32 ixgbe_dcb_config_pfc_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *);
+
+/* DCB stats */
+s32 ixgbe_dcb_config_tc_stats(struct ixgbe_hw *);
+s32 ixgbe_dcb_get_tc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8);
+s32 ixgbe_dcb_get_pfc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8);
+
+/* DCB config arbiters */
+s32 ixgbe_dcb_config_tx_desc_arbiter_cee(struct ixgbe_hw *,
+ struct ixgbe_dcb_config *);
+s32 ixgbe_dcb_config_tx_data_arbiter_cee(struct ixgbe_hw *,
+ struct ixgbe_dcb_config *);
+s32 ixgbe_dcb_config_rx_arbiter_cee(struct ixgbe_hw *,
+ struct ixgbe_dcb_config *);
+
+/* DCB unpack routines */
+void ixgbe_dcb_unpack_pfc_cee(struct ixgbe_dcb_config *, u8 *, u8 *);
+void ixgbe_dcb_unpack_refill_cee(struct ixgbe_dcb_config *, int, u16 *);
+void ixgbe_dcb_unpack_max_cee(struct ixgbe_dcb_config *, u16 *);
+void ixgbe_dcb_unpack_bwgid_cee(struct ixgbe_dcb_config *, int, u8 *);
+void ixgbe_dcb_unpack_tsa_cee(struct ixgbe_dcb_config *, int, u8 *);
+void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *, int, u8 *);
+u8 ixgbe_dcb_get_tc_from_up(struct ixgbe_dcb_config *, int, u8);
+
+/* DCB initialization */
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, u16 *, u16 *, u8 *, u8 *, u8 *);
+s32 ixgbe_dcb_hw_config_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *);
+#endif /* _IXGBE_DCB_H_ */
new file mode 100644
@@ -0,0 +1,360 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+
+/**
+ * ixgbe_dcb_get_tc_stats_82598 - Return status data for each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count: Number of elements in bwg_array.
+ *
+ * This function returns the status data for each of the Traffic Classes in use.
+ */
+s32 ixgbe_dcb_get_tc_stats_82598(struct ixgbe_hw *hw,
+ struct ixgbe_hw_stats *stats,
+ u8 tc_count)
+{
+ int tc;
+
+ DEBUGFUNC("dcb_get_tc_stats");
+
+ if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+ return IXGBE_ERR_PARAM;
+
+ /* Statistics pertaining to each traffic class */
+ for (tc = 0; tc < tc_count; tc++) {
+ /* Transmitted Packets */
+ stats->qptc[tc] += IXGBE_READ_REG(hw, IXGBE_QPTC(tc));
+ /* Transmitted Bytes */
+ stats->qbtc[tc] += IXGBE_READ_REG(hw, IXGBE_QBTC(tc));
+ /* Received Packets */
+ stats->qprc[tc] += IXGBE_READ_REG(hw, IXGBE_QPRC(tc));
+ /* Received Bytes */
+ stats->qbrc[tc] += IXGBE_READ_REG(hw, IXGBE_QBRC(tc));
+
+#if 0
+ /* Can we get rid of these?? Consequently, getting rid
+ * of the tc_stats structure.
+ */
+ tc_stats_array[up]->in_overflow_discards = 0;
+ tc_stats_array[up]->out_overflow_discards = 0;
+#endif
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_get_pfc_stats_82598 - Returns CBFC status data
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count: Number of elements in bwg_array.
+ *
+ * This function returns the CBFC status data for each of the Traffic Classes.
+ */
+s32 ixgbe_dcb_get_pfc_stats_82598(struct ixgbe_hw *hw,
+ struct ixgbe_hw_stats *stats,
+ u8 tc_count)
+{
+ int tc;
+
+ DEBUGFUNC("dcb_get_pfc_stats");
+
+ if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+ return IXGBE_ERR_PARAM;
+
+ for (tc = 0; tc < tc_count; tc++) {
+ /* Priority XOFF Transmitted */
+ stats->pxofftxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(tc));
+ /* Priority XOFF Received */
+ stats->pxoffrxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(tc));
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw, u16 *refill,
+ u16 *max, u8 *tsa)
+{
+ u32 reg = 0;
+ u32 credit_refill = 0;
+ u32 credit_max = 0;
+ u8 i = 0;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA;
+ IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ /* Enable Arbiter */
+ reg &= ~IXGBE_RMCS_ARBDIS;
+ /* Enable Receive Recycle within the BWG */
+ reg |= IXGBE_RMCS_RRM;
+ /* Enable Deficit Fixed Priority arbitration*/
+ reg |= IXGBE_RMCS_DFP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ credit_refill = refill[i];
+ credit_max = max[i];
+
+ reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT);
+
+ if (tsa[i] == ixgbe_dcb_tsa_strict)
+ reg |= IXGBE_RT2CR_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg);
+ }
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ reg |= IXGBE_RDRXCTL_RDMTS_1_2;
+ reg |= IXGBE_RDRXCTL_MPBEN;
+ reg |= IXGBE_RDRXCTL_MCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ /* Make sure there is enough descriptors before arbitration */
+ reg &= ~IXGBE_RXCTRL_DMBYPS;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill, u16 *max, u8 *bwg_id,
+ u8 *tsa)
+{
+ u32 reg, max_credits;
+ u8 i;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_DPMCS);
+
+ /* Enable arbiter */
+ reg &= ~IXGBE_DPMCS_ARBDIS;
+ reg |= IXGBE_DPMCS_TSOEF;
+
+ /* Configure Max TSO packet size 34KB including payload and headers */
+ reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT);
+
+ IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ max_credits = max[i];
+ reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT;
+ reg |= refill[i];
+ reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT;
+
+ if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+ reg |= IXGBE_TDTQ2TCCR_GSP;
+
+ if (tsa[i] == ixgbe_dcb_tsa_strict)
+ reg |= IXGBE_TDTQ2TCCR_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill, u16 *max, u8 *bwg_id,
+ u8 *tsa)
+{
+ u32 reg;
+ u8 i;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
+ /* Enable Data Plane Arbiter */
+ reg &= ~IXGBE_PDPMCS_ARBDIS;
+ /* Enable DFP and Transmit Recycle Mode */
+ reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM);
+
+ IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ reg = refill[i];
+ reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT;
+ reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT;
+
+ if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+ reg |= IXGBE_TDPT2TCCR_GSP;
+
+ if (tsa[i] == ixgbe_dcb_tsa_strict)
+ reg |= IXGBE_TDPT2TCCR_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg);
+ }
+
+ /* Enable Tx packet buffer division */
+ reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
+ reg |= IXGBE_DTXCTL_ENDBUBD;
+ IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82598 - Config priority flow control
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Priority Flow Control for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
+{
+ u32 fcrtl, reg;
+ u8 i;
+
+ /* Enable Transmit Priority Flow Control */
+ reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ reg &= ~IXGBE_RMCS_TFCE_802_3X;
+ reg |= IXGBE_RMCS_TFCE_PRIORITY;
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+ /* Enable Receive Priority Flow Control */
+ reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ reg &= ~(IXGBE_FCTRL_RPFCE | IXGBE_FCTRL_RFCE);
+
+ if (pfc_en)
+ reg |= IXGBE_FCTRL_RPFCE;
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
+
+ /* Configure PFC Tx thresholds per TC */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if (!(pfc_en & (1 << i))) {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+ continue;
+ }
+
+ fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+ reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
+ }
+
+ /* Configure pause time */
+ reg = hw->fc.pause_time | (hw->fc.pause_time << 16);
+ for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
+{
+ u32 reg = 0;
+ u8 i = 0;
+ u8 j = 0;
+
+ /* Receive Queues stats setting - 8 queues per statistics reg */
+ for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i));
+ reg |= ((0x1010101) * j);
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+ reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1));
+ reg |= ((0x1010101) * j);
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg);
+ }
+ /* Transmit Queues stats setting - 4 queues per statistics reg*/
+ for (i = 0; i < 8; i++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i));
+ reg |= ((0x1010101) * i);
+ IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82598 - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, int link_speed,
+ u16 *refill, u16 *max, u8 *bwg_id,
+ u8 *tsa)
+{
+ UNREFERENCED_1PARAMETER(link_speed);
+
+ ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, tsa);
+ ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, bwg_id,
+ tsa);
+ ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max, bwg_id,
+ tsa);
+ ixgbe_dcb_config_tc_stats_82598(hw);
+
+
+ return IXGBE_SUCCESS;
+}
new file mode 100644
@@ -0,0 +1,99 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_DCB_82598_H_
+#define _IXGBE_DCB_82598_H_
+
+/* DCB register definitions */
+
+#define IXGBE_DPMCS_MTSOS_SHIFT 16
+#define IXGBE_DPMCS_TDPAC 0x00000001 /* 0 Round Robin,
+ * 1 DFP - Deficit Fixed Priority */
+#define IXGBE_DPMCS_TRM 0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_DPMCS_ARBDIS 0x00000040 /* DCB arbiter disable */
+#define IXGBE_DPMCS_TSOEF 0x00080000 /* TSO Expand Factor: 0=x4, 1=x2 */
+
+#define IXGBE_RUPPBMR_MQA 0x80000000 /* Enable UP to queue mapping */
+
+#define IXGBE_RT2CR_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RT2CR_LSP 0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet
+ * buffers enable */
+#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores
+ * (RSS) enable */
+
+#define IXGBE_TDTQ2TCCR_MCL_SHIFT 12
+#define IXGBE_TDTQ2TCCR_BWG_SHIFT 9
+#define IXGBE_TDTQ2TCCR_GSP 0x40000000
+#define IXGBE_TDTQ2TCCR_LSP 0x80000000
+
+#define IXGBE_TDPT2TCCR_MCL_SHIFT 12
+#define IXGBE_TDPT2TCCR_BWG_SHIFT 9
+#define IXGBE_TDPT2TCCR_GSP 0x40000000
+#define IXGBE_TDPT2TCCR_LSP 0x80000000
+
+#define IXGBE_PDPMCS_TPPAC 0x00000020 /* 0 Round Robin,
+ * 1 DFP - Deficit Fixed Priority */
+#define IXGBE_PDPMCS_ARBDIS 0x00000040 /* Arbiter disable */
+#define IXGBE_PDPMCS_TRM 0x00000100 /* Transmit Recycle Mode enable */
+
+#define IXGBE_DTXCTL_ENDBUBD 0x00000004 /* Enable DBU buffer division */
+
+#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */
+
+/* DCB driver APIs */
+
+/* DCB PFC */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *, u8);
+
+/* DCB stats */
+s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *);
+s32 ixgbe_dcb_get_tc_stats_82598(struct ixgbe_hw *,
+ struct ixgbe_hw_stats *, u8);
+s32 ixgbe_dcb_get_pfc_stats_82598(struct ixgbe_hw *,
+ struct ixgbe_hw_stats *, u8);
+
+/* DCB config arbiters */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *, u16 *, u16 *,
+ u8 *, u8 *);
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *, u16 *, u16 *,
+ u8 *, u8 *);
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *, u16 *, u16 *, u8 *);
+
+/* DCB initialization */
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *, int, u16 *, u16 *, u8 *, u8 *);
+#endif /* _IXGBE_DCB_82958_H_ */
new file mode 100644
@@ -0,0 +1,593 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_dcb_get_tc_stats_82599 - Returns status for each traffic class
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count: Number of elements in bwg_array.
+ *
+ * This function returns the status data for each of the Traffic Classes in use.
+ */
+s32 ixgbe_dcb_get_tc_stats_82599(struct ixgbe_hw *hw,
+ struct ixgbe_hw_stats *stats,
+ u8 tc_count)
+{
+ int tc;
+
+ DEBUGFUNC("dcb_get_tc_stats");
+
+ if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+ return IXGBE_ERR_PARAM;
+
+ /* Statistics pertaining to each traffic class */
+ for (tc = 0; tc < tc_count; tc++) {
+ /* Transmitted Packets */
+ stats->qptc[tc] += IXGBE_READ_REG(hw, IXGBE_QPTC(tc));
+ /* Transmitted Bytes (read low first to prevent missed carry) */
+ stats->qbtc[tc] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(tc));
+ stats->qbtc[tc] +=
+ (((u64)(IXGBE_READ_REG(hw, IXGBE_QBTC_H(tc)))) << 32);
+ /* Received Packets */
+ stats->qprc[tc] += IXGBE_READ_REG(hw, IXGBE_QPRC(tc));
+ /* Received Bytes (read low first to prevent missed carry) */
+ stats->qbrc[tc] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(tc));
+ stats->qbrc[tc] +=
+ (((u64)(IXGBE_READ_REG(hw, IXGBE_QBRC_H(tc)))) << 32);
+
+ /* Received Dropped Packet */
+ stats->qprdc[tc] += IXGBE_READ_REG(hw, IXGBE_QPRDC(tc));
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_get_pfc_stats_82599 - Return CBFC status data
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ * @tc_count: Number of elements in bwg_array.
+ *
+ * This function returns the CBFC status data for each of the Traffic Classes.
+ */
+s32 ixgbe_dcb_get_pfc_stats_82599(struct ixgbe_hw *hw,
+ struct ixgbe_hw_stats *stats,
+ u8 tc_count)
+{
+ int tc;
+
+ DEBUGFUNC("dcb_get_pfc_stats");
+
+ if (tc_count > IXGBE_DCB_MAX_TRAFFIC_CLASS)
+ return IXGBE_ERR_PARAM;
+
+ for (tc = 0; tc < tc_count; tc++) {
+ /* Priority XOFF Transmitted */
+ stats->pxofftxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(tc));
+ /* Priority XOFF Received */
+ stats->pxoffrxc[tc] += IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(tc));
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
+ u16 *max, u8 *bwg_id, u8 *tsa,
+ u8 *map)
+{
+ u32 reg = 0;
+ u32 credit_refill = 0;
+ u32 credit_max = 0;
+ u8 i = 0;
+
+ /*
+ * Disable the arbiter before changing parameters
+ * (always enable recycle mode; WSP)
+ */
+ reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+ /*
+ * map all UPs to TCs. up_to_tc_bitmap for each TC has corresponding
+ * bits sets for the UPs that needs to be mappped to that TC.
+ * e.g if priorities 6 and 7 are to be mapped to a TC then the
+ * up_to_tc_bitmap value for that TC will be 11000000 in binary.
+ */
+ reg = 0;
+ for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++)
+ reg |= (map[i] << (i * IXGBE_RTRUP2TC_UP_SHIFT));
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ credit_refill = refill[i];
+ credit_max = max[i];
+ reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT);
+
+ reg |= (u32)(bwg_id[i]) << IXGBE_RTRPT4C_BWG_SHIFT;
+
+ if (tsa[i] == ixgbe_dcb_tsa_strict)
+ reg |= IXGBE_RTRPT4C_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg);
+ }
+
+ /*
+ * Configure Rx packet plane (recycle mode; WSP) and
+ * enable arbiter
+ */
+ reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC;
+ IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
+ u16 *max, u8 *bwg_id, u8 *tsa)
+{
+ u32 reg, max_credits;
+ u8 i;
+
+ /* Clear the per-Tx queue credits; we use per-TC instead */
+ for (i = 0; i < 128; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0);
+ }
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ max_credits = max[i];
+ reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT;
+ reg |= refill[i];
+ reg |= (u32)(bwg_id[i]) << IXGBE_RTTDT2C_BWG_SHIFT;
+
+ if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+ reg |= IXGBE_RTTDT2C_GSP;
+
+ if (tsa[i] == ixgbe_dcb_tsa_strict)
+ reg |= IXGBE_RTTDT2C_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg);
+ }
+
+ /*
+ * Configure Tx descriptor plane (recycle mode; WSP) and
+ * enable arbiter
+ */
+ reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
+ u16 *max, u8 *bwg_id, u8 *tsa,
+ u8 *map)
+{
+ u32 reg;
+ u8 i;
+
+ /*
+ * Disable the arbiter before changing parameters
+ * (always enable recycle mode; SP; arb delay)
+ */
+ reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+ (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
+ IXGBE_RTTPCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+ /*
+ * map all UPs to TCs. up_to_tc_bitmap for each TC has corresponding
+ * bits sets for the UPs that needs to be mappped to that TC.
+ * e.g if priorities 6 and 7 are to be mapped to a TC then the
+ * up_to_tc_bitmap value for that TC will be 11000000 in binary.
+ */
+ reg = 0;
+ for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++)
+ reg |= (map[i] << (i * IXGBE_RTTUP2TC_UP_SHIFT));
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ reg = refill[i];
+ reg |= (u32)(max[i]) << IXGBE_RTTPT2C_MCL_SHIFT;
+ reg |= (u32)(bwg_id[i]) << IXGBE_RTTPT2C_BWG_SHIFT;
+
+ if (tsa[i] == ixgbe_dcb_tsa_group_strict_cee)
+ reg |= IXGBE_RTTPT2C_GSP;
+
+ if (tsa[i] == ixgbe_dcb_tsa_strict)
+ reg |= IXGBE_RTTPT2C_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg);
+ }
+
+ /*
+ * Configure Tx packet plane (recycle mode; SP; arb delay) and
+ * enable arbiter
+ */
+ reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+ (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82599 - Configure priority flow control
+ * @hw: pointer to hardware structure
+ * @pfc_en: enabled pfc bitmask
+ * @map: priority to tc assignments indexed by priority
+ *
+ * Configure Priority Flow Control (PFC) for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *map)
+{
+ u32 i, j, fcrtl, reg;
+ u8 max_tc = 0;
+
+ /* Enable Transmit Priority Flow Control */
+ IXGBE_WRITE_REG(hw, IXGBE_FCCFG, IXGBE_FCCFG_TFCE_PRIORITY);
+
+ /* Enable Receive Priority Flow Control */
+ reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+ reg |= IXGBE_MFLCN_DPF;
+
+ /*
+ * X540 supports per TC Rx priority flow control. So
+ * clear all TCs and only enable those that should be
+ * enabled.
+ */
+ reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
+
+ if (hw->mac.type >= ixgbe_mac_X540)
+ reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
+
+ if (pfc_en)
+ reg |= IXGBE_MFLCN_RPFCE;
+
+ IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
+
+ for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++) {
+ if (map[i] > max_tc)
+ max_tc = map[i];
+ }
+
+
+ /* Configure PFC Tx thresholds per TC */
+ for (i = 0; i <= max_tc; i++) {
+ int enabled = 0;
+
+ for (j = 0; j < IXGBE_DCB_MAX_USER_PRIORITY; j++) {
+ if ((map[j] == i) && (pfc_en & (1 << j))) {
+ enabled = 1;
+ break;
+ }
+ }
+
+ if (enabled) {
+ reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+ fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
+ } else {
+ /*
+ * In order to prevent Tx hangs when the internal Tx
+ * switch is enabled we must set the high water mark
+ * to the Rx packet buffer size - 24KB. This allows
+ * the Tx switch to function even under heavy Rx
+ * workloads.
+ */
+ reg = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
+ }
+
+ for (; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0);
+ }
+
+ /* Configure pause time (2 TCs per register) */
+ reg = hw->fc.pause_time | (hw->fc.pause_time << 16);
+ for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ u32 reg = 0;
+ u8 i = 0;
+ u8 tc_count = 8;
+ bool vt_mode = false;
+
+ if (dcb_config != NULL) {
+ tc_count = dcb_config->num_tcs.pg_tcs;
+ vt_mode = dcb_config->vt_mode;
+ }
+
+ if (!((tc_count == 8 && vt_mode == false) || tc_count == 4))
+ return IXGBE_ERR_PARAM;
+
+ if (tc_count == 8 && vt_mode == false) {
+ /*
+ * Receive Queues stats setting
+ * 32 RQSMR registers, each configuring 4 queues.
+ *
+ * Set all 16 queues of each TC to the same stat
+ * with TC 'n' going to stat 'n'.
+ */
+ for (i = 0; i < 32; i++) {
+ reg = 0x01010101 * (i / 4);
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+ }
+ /*
+ * Transmit Queues stats setting
+ * 32 TQSM registers, each controlling 4 queues.
+ *
+ * Set all queues of each TC to the same stat
+ * with TC 'n' going to stat 'n'.
+ * Tx queues are allocated non-uniformly to TCs:
+ * 32, 32, 16, 16, 8, 8, 8, 8.
+ */
+ for (i = 0; i < 32; i++) {
+ if (i < 8)
+ reg = 0x00000000;
+ else if (i < 16)
+ reg = 0x01010101;
+ else if (i < 20)
+ reg = 0x02020202;
+ else if (i < 24)
+ reg = 0x03030303;
+ else if (i < 26)
+ reg = 0x04040404;
+ else if (i < 28)
+ reg = 0x05050505;
+ else if (i < 30)
+ reg = 0x06060606;
+ else
+ reg = 0x07070707;
+ IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
+ }
+ } else if (tc_count == 4 && vt_mode == false) {
+ /*
+ * Receive Queues stats setting
+ * 32 RQSMR registers, each configuring 4 queues.
+ *
+ * Set all 16 queues of each TC to the same stat
+ * with TC 'n' going to stat 'n'.
+ */
+ for (i = 0; i < 32; i++) {
+ if (i % 8 > 3)
+ /* In 4 TC mode, odd 16-queue ranges are
+ * not used.
+ */
+ continue;
+ reg = 0x01010101 * (i / 8);
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+ }
+ /*
+ * Transmit Queues stats setting
+ * 32 TQSM registers, each controlling 4 queues.
+ *
+ * Set all queues of each TC to the same stat
+ * with TC 'n' going to stat 'n'.
+ * Tx queues are allocated non-uniformly to TCs:
+ * 64, 32, 16, 16.
+ */
+ for (i = 0; i < 32; i++) {
+ if (i < 16)
+ reg = 0x00000000;
+ else if (i < 24)
+ reg = 0x01010101;
+ else if (i < 28)
+ reg = 0x02020202;
+ else
+ reg = 0x03030303;
+ IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
+ }
+ } else if (tc_count == 4 && vt_mode == true) {
+ /*
+ * Receive Queues stats setting
+ * 32 RQSMR registers, each configuring 4 queues.
+ *
+ * Queue Indexing in 32 VF with DCB mode maps 4 TC's to each
+ * pool. Set all 32 queues of each TC across pools to the same
+ * stat with TC 'n' going to stat 'n'.
+ */
+ for (i = 0; i < 32; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), 0x03020100);
+ /*
+ * Transmit Queues stats setting
+ * 32 TQSM registers, each controlling 4 queues.
+ *
+ * Queue Indexing in 32 VF with DCB mode maps 4 TC's to each
+ * pool. Set all 32 queues of each TC across pools to the same
+ * stat with TC 'n' going to stat 'n'.
+ */
+ for (i = 0; i < 32; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), 0x03020100);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_config_82599 - Configure general DCB parameters
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure general DCB parameters.
+ */
+s32 ixgbe_dcb_config_82599(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ u32 reg;
+ u32 q;
+
+ /* Disable the Tx desc arbiter so that MTQC can be changed */
+ reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+ reg |= IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+ if (dcb_config->num_tcs.pg_tcs == 8) {
+ /* Enable DCB for Rx with 8 TCs */
+ switch (reg & IXGBE_MRQC_MRQE_MASK) {
+ case 0:
+ case IXGBE_MRQC_RT4TCEN:
+ /* RSS disabled cases */
+ reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+ IXGBE_MRQC_RT8TCEN;
+ break;
+ case IXGBE_MRQC_RSSEN:
+ case IXGBE_MRQC_RTRSS4TCEN:
+ /* RSS enabled cases */
+ reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+ IXGBE_MRQC_RTRSS8TCEN;
+ break;
+ default:
+ /*
+ * Unsupported value, assume stale data,
+ * overwrite no RSS
+ */
+ ASSERT(0);
+ reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+ IXGBE_MRQC_RT8TCEN;
+ }
+ }
+ if (dcb_config->num_tcs.pg_tcs == 4) {
+ /* We support both VT-on and VT-off with 4 TCs. */
+ if (dcb_config->vt_mode)
+ reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+ IXGBE_MRQC_VMDQRT4TCEN;
+ else
+ reg = (reg & ~IXGBE_MRQC_MRQE_MASK) |
+ IXGBE_MRQC_RTRSS4TCEN;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_MRQC, reg);
+
+ /* Enable DCB for Tx with 8 TCs */
+ if (dcb_config->num_tcs.pg_tcs == 8)
+ reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
+ else {
+ /* We support both VT-on and VT-off with 4 TCs. */
+ reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
+ if (dcb_config->vt_mode)
+ reg |= IXGBE_MTQC_VT_ENA;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg);
+
+ /* Disable drop for all queues */
+ for (q = 0; q < 128; q++)
+ IXGBE_WRITE_REG(hw, IXGBE_QDE,
+ (IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT)));
+
+ /* Enable the Tx desc arbiter */
+ reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+ reg &= ~IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+ /* Enable Security TX Buffer IFG for DCB */
+ reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
+ reg |= IXGBE_SECTX_DCB;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82599 - Configure and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, int link_speed,
+ u16 *refill, u16 *max, u8 *bwg_id, u8 *tsa,
+ u8 *map)
+{
+ UNREFERENCED_1PARAMETER(link_speed);
+
+ ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id, tsa,
+ map);
+ ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max, bwg_id,
+ tsa);
+ ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
+ tsa, map);
+
+ return IXGBE_SUCCESS;
+}
+
new file mode 100644
@@ -0,0 +1,153 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_DCB_82599_H_
+#define _IXGBE_DCB_82599_H_
+
+/* DCB register definitions */
+#define IXGBE_RTTDCS_TDPAC 0x00000001 /* 0 Round Robin,
+ * 1 WSP - Weighted Strict Priority
+ */
+#define IXGBE_RTTDCS_VMPAC 0x00000002 /* 0 Round Robin,
+ * 1 WRR - Weighted Round Robin
+ */
+#define IXGBE_RTTDCS_TDRM 0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_RTTDCS_BDPM 0x00400000 /* Bypass Data Pipe - must clear! */
+#define IXGBE_RTTDCS_BPBFSM 0x00800000 /* Bypass PB Free Space - must
+ * clear!
+ */
+#define IXGBE_RTTDCS_SPEED_CHG 0x80000000 /* Link speed change */
+
+/* Receive UP2TC mapping */
+#define IXGBE_RTRUP2TC_UP_SHIFT 3
+#define IXGBE_RTRUP2TC_UP_MASK 7
+/* Transmit UP2TC mapping */
+#define IXGBE_RTTUP2TC_UP_SHIFT 3
+
+#define IXGBE_RTRPT4C_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RTRPT4C_BWG_SHIFT 9 /* Offset to BWG index */
+#define IXGBE_RTRPT4C_GSP 0x40000000 /* GSP enable bit */
+#define IXGBE_RTRPT4C_LSP 0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet
+ * buffers enable
+ */
+#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores
+ * (RSS) enable
+ */
+
+/* RTRPCS Bit Masks */
+#define IXGBE_RTRPCS_RRM 0x00000002 /* Receive Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RTRPCS_RAC 0x00000004
+#define IXGBE_RTRPCS_ARBDIS 0x00000040 /* Arbitration disable bit */
+
+/* RTTDT2C Bit Masks */
+#define IXGBE_RTTDT2C_MCL_SHIFT 12
+#define IXGBE_RTTDT2C_BWG_SHIFT 9
+#define IXGBE_RTTDT2C_GSP 0x40000000
+#define IXGBE_RTTDT2C_LSP 0x80000000
+
+#define IXGBE_RTTPT2C_MCL_SHIFT 12
+#define IXGBE_RTTPT2C_BWG_SHIFT 9
+#define IXGBE_RTTPT2C_GSP 0x40000000
+#define IXGBE_RTTPT2C_LSP 0x80000000
+
+/* RTTPCS Bit Masks */
+#define IXGBE_RTTPCS_TPPAC 0x00000020 /* 0 Round Robin,
+ * 1 SP - Strict Priority
+ */
+#define IXGBE_RTTPCS_ARBDIS 0x00000040 /* Arbiter disable */
+#define IXGBE_RTTPCS_TPRM 0x00000100 /* Transmit Recycle Mode enable */
+#define IXGBE_RTTPCS_ARBD_SHIFT 22
+#define IXGBE_RTTPCS_ARBD_DCB 0x4 /* Arbitration delay in DCB mode */
+
+#define IXGBE_TXPBTHRESH_DCB 0xA /* THRESH value for DCB mode */
+
+/* SECTXMINIFG DCB */
+#define IXGBE_SECTX_DCB 0x00001F00 /* DCB TX Buffer SEC IFG */
+
+/* BCN register definitions */
+#define IXGBE_RTTBCNRC_RF_INT_SHIFT 14
+#define IXGBE_RTTBCNRC_RS_ENA 0x80000000
+
+#define IXGBE_RTTBCNCR_MNG_CMTGI 0x00000001
+#define IXGBE_RTTBCNCR_MGN_BCNA_MODE 0x00000002
+#define IXGBE_RTTBCNCR_RSV7_11_SHIFT 5
+#define IXGBE_RTTBCNCR_G 0x00000400
+#define IXGBE_RTTBCNCR_I 0x00000800
+#define IXGBE_RTTBCNCR_H 0x00001000
+#define IXGBE_RTTBCNCR_VER_SHIFT 14
+#define IXGBE_RTTBCNCR_CMT_ETH_SHIFT 16
+
+#define IXGBE_RTTBCNACL_SMAC_L_SHIFT 16
+
+#define IXGBE_RTTBCNTG_BCNA_MODE 0x80000000
+
+#define IXGBE_RTTBCNRTT_TS_SHIFT 3
+#define IXGBE_RTTBCNRTT_TXQ_IDX_SHIFT 16
+
+#define IXGBE_RTTBCNRD_BCN_CLEAR_ALL 0x00000002
+#define IXGBE_RTTBCNRD_DRIFT_FAC_SHIFT 2
+#define IXGBE_RTTBCNRD_DRIFT_INT_SHIFT 16
+#define IXGBE_RTTBCNRD_DRIFT_ENA 0x80000000
+
+
+/* DCB driver APIs */
+
+/* DCB PFC */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *, u8, u8 *);
+
+/* DCB stats */
+s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *,
+ struct ixgbe_dcb_config *);
+s32 ixgbe_dcb_get_tc_stats_82599(struct ixgbe_hw *,
+ struct ixgbe_hw_stats *, u8);
+s32 ixgbe_dcb_get_pfc_stats_82599(struct ixgbe_hw *,
+ struct ixgbe_hw_stats *, u8);
+
+/* DCB config arbiters */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *, u16 *, u16 *,
+ u8 *, u8 *);
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *, u16 *, u16 *,
+ u8 *, u8 *, u8 *);
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *, u16 *, u16 *, u8 *,
+ u8 *, u8 *);
+
+/* DCB initialization */
+s32 ixgbe_dcb_config_82599(struct ixgbe_hw *,
+ struct ixgbe_dcb_config *);
+
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *, int, u16 *, u16 *, u8 *,
+ u8 *, u8 *);
+#endif /* _IXGBE_DCB_82959_H_ */
new file mode 100644
@@ -0,0 +1,789 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_mbx.h"
+
+/**
+ * ixgbe_read_mbx - Reads a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to read
+ *
+ * returns SUCCESS if it successfully read message from buffer
+ **/
+s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_read_mbx");
+
+ /* limit read to size of mailbox */
+ if (size > mbx->size)
+ size = mbx->size;
+
+ if (mbx->ops.read)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_write_mbx - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_write_mbx");
+
+ if (size > mbx->size) {
+ ret_val = IXGBE_ERR_MBX;
+ ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
+ "Invalid mailbox message size %d", size);
+ } else if (mbx->ops.write)
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_msg - checks to see if someone sent us mail
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_check_for_msg");
+
+ if (mbx->ops.check_for_msg)
+ ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_ack - checks to see if someone sent us ACK
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_check_for_ack");
+
+ if (mbx->ops.check_for_ack)
+ ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_rst - checks to see if other side has reset
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_check_for_rst");
+
+ if (mbx->ops.check_for_rst)
+ ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+STATIC s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ DEBUGFUNC("ixgbe_poll_for_msg");
+
+ if (!countdown || !mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ usec_delay(mbx->usec_delay);
+ }
+
+ if (countdown == 0)
+ ERROR_REPORT2(IXGBE_ERROR_POLLING,
+ "Polling for VF%d mailbox message timedout", mbx_id);
+
+out:
+ return countdown ? IXGBE_SUCCESS : IXGBE_ERR_MBX;
+}
+
+/**
+ * ixgbe_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+STATIC s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ DEBUGFUNC("ixgbe_poll_for_ack");
+
+ if (!countdown || !mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ usec_delay(mbx->usec_delay);
+ }
+
+ if (countdown == 0)
+ ERROR_REPORT2(IXGBE_ERROR_POLLING,
+ "Polling for VF%d mailbox ack timedout", mbx_id);
+
+out:
+ return countdown ? IXGBE_SUCCESS : IXGBE_ERR_MBX;
+}
+
+/**
+ * ixgbe_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_read_posted_mbx");
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = ixgbe_poll_for_msg(hw, mbx_id);
+
+ /* if ack received read message, otherwise we timed out */
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_write_posted_mbx");
+
+ /* exit if either we can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg */
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = ixgbe_poll_for_ack(hw, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_init_mbx_ops_generic - Initialize MB function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Setups up the mailbox read and write message function pointers
+ **/
+void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+ mbx->ops.read_posted = ixgbe_read_posted_mbx;
+ mbx->ops.write_posted = ixgbe_write_posted_mbx;
+}
+
+/**
+ * ixgbe_read_v2p_mailbox - read v2p mailbox
+ * @hw: pointer to the HW structure
+ *
+ * This function is used to read the v2p mailbox without losing the read to
+ * clear status bits.
+ **/
+STATIC u32 ixgbe_read_v2p_mailbox(struct ixgbe_hw *hw)
+{
+ u32 v2p_mailbox = IXGBE_READ_REG(hw, IXGBE_VFMAILBOX);
+
+ v2p_mailbox |= hw->mbx.v2p_mailbox;
+ hw->mbx.v2p_mailbox |= v2p_mailbox & IXGBE_VFMAILBOX_R2C_BITS;
+
+ return v2p_mailbox;
+}
+
+/**
+ * ixgbe_check_for_bit_vf - Determine if a status bit was set
+ * @hw: pointer to the HW structure
+ * @mask: bitmask for bits to be tested and cleared
+ *
+ * This function is used to check for the read to clear bits within
+ * the V2P mailbox.
+ **/
+STATIC s32 ixgbe_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 v2p_mailbox = ixgbe_read_v2p_mailbox(hw);
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (v2p_mailbox & mask)
+ ret_val = IXGBE_SUCCESS;
+
+ hw->mbx.v2p_mailbox &= ~mask;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_msg_vf - checks to see if the PF has sent mail
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the PF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_msg_vf(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ UNREFERENCED_1PARAMETER(mbx_id);
+ DEBUGFUNC("ixgbe_check_for_msg_vf");
+
+ if (!ixgbe_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFSTS)) {
+ ret_val = IXGBE_SUCCESS;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_ack_vf - checks to see if the PF has ACK'd
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_ack_vf(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ UNREFERENCED_1PARAMETER(mbx_id);
+ DEBUGFUNC("ixgbe_check_for_ack_vf");
+
+ if (!ixgbe_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFACK)) {
+ ret_val = IXGBE_SUCCESS;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_rst_vf - checks to see if the PF has reset
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns true if the PF has set the reset done bit or else false
+ **/
+STATIC s32 ixgbe_check_for_rst_vf(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ UNREFERENCED_1PARAMETER(mbx_id);
+ DEBUGFUNC("ixgbe_check_for_rst_vf");
+
+ if (!ixgbe_check_for_bit_vf(hw, (IXGBE_VFMAILBOX_RSTD |
+ IXGBE_VFMAILBOX_RSTI))) {
+ ret_val = IXGBE_SUCCESS;
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_obtain_mbx_lock_vf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+STATIC s32 ixgbe_obtain_mbx_lock_vf(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_obtain_mbx_lock_vf");
+
+ /* Take ownership of the buffer */
+ IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_VFU);
+
+ /* reserve mailbox for vf use */
+ if (ixgbe_read_v2p_mailbox(hw) & IXGBE_VFMAILBOX_VFU)
+ ret_val = IXGBE_SUCCESS;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_write_mbx_vf - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+STATIC s32 ixgbe_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ s32 ret_val;
+ u16 i;
+
+ UNREFERENCED_1PARAMETER(mbx_id);
+
+ DEBUGFUNC("ixgbe_write_mbx_vf");
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbe_obtain_mbx_lock_vf(hw);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ ixgbe_check_for_msg_vf(hw, 0);
+ ixgbe_check_for_ack_vf(hw, 0);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_VFMBMEM, i, msg[i]);
+
+ /*
+ * Complete the remaining mailbox data registers with zero to reset
+ * the data sent in a previous exchange (in either side) with the PF,
+ * including exchanges performed by another Guest OS to which that VF
+ * was previously assigned.
+ */
+ while (i < hw->mbx.size) {
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_VFMBMEM, i, 0);
+ i++;
+ }
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+ /* Drop VFU and interrupt the PF to tell it a message has been sent */
+ IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_REQ);
+
+out_no_write:
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_mbx_vf - Reads a message from the inbox intended for vf
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to read
+ *
+ * returns SUCCESS if it successfully read message from buffer
+ **/
+STATIC s32 ixgbe_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_read_mbx_vf");
+ UNREFERENCED_1PARAMETER(mbx_id);
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbe_obtain_mbx_lock_vf(hw);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message from the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_VFMBMEM, i);
+
+ /* Acknowledge receipt and release mailbox, then we're done */
+ IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+/**
+ * ixgbe_init_mbx_params_vf - set initial values for vf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+void ixgbe_init_mbx_params_vf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+ /* start mailbox as timed out and let the reset_hw call set the timeout
+ * value to begin communications */
+ mbx->timeout = 0;
+ mbx->usec_delay = IXGBE_VF_MBX_INIT_DELAY;
+
+ mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+ mbx->ops.read = ixgbe_read_mbx_vf;
+ mbx->ops.write = ixgbe_write_mbx_vf;
+ mbx->ops.read_posted = ixgbe_read_posted_mbx;
+ mbx->ops.write_posted = ixgbe_write_posted_mbx;
+ mbx->ops.check_for_msg = ixgbe_check_for_msg_vf;
+ mbx->ops.check_for_ack = ixgbe_check_for_ack_vf;
+ mbx->ops.check_for_rst = ixgbe_check_for_rst_vf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+}
+
+STATIC s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index)
+{
+ u32 mbvficr = IXGBE_READ_REG(hw, IXGBE_MBVFICR(index));
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (mbvficr & mask) {
+ ret_val = IXGBE_SUCCESS;
+ IXGBE_WRITE_REG(hw, IXGBE_MBVFICR(index), mask);
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+ s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+ u32 vf_bit = vf_number % 16;
+
+ DEBUGFUNC("ixgbe_check_for_msg_pf");
+
+ if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFREQ_VF1 << vf_bit,
+ index)) {
+ ret_val = IXGBE_SUCCESS;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+ s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+ u32 vf_bit = vf_number % 16;
+
+ DEBUGFUNC("ixgbe_check_for_ack_pf");
+
+ if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFACK_VF1 << vf_bit,
+ index)) {
+ ret_val = IXGBE_SUCCESS;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_rst_pf - checks to see if the VF has reset
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+STATIC s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ u32 reg_offset = (vf_number < 32) ? 0 : 1;
+ u32 vf_shift = vf_number % 32;
+ u32 vflre = 0;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ DEBUGFUNC("ixgbe_check_for_rst_pf");
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
+ break;
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ case ixgbe_mac_X540:
+ vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset));
+ break;
+ default:
+ break;
+ }
+
+ if (vflre & (1 << vf_shift)) {
+ ret_val = IXGBE_SUCCESS;
+ IXGBE_WRITE_REG(hw, IXGBE_VFLREC(reg_offset), (1 << vf_shift));
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+STATIC s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+ u32 p2v_mailbox;
+
+ DEBUGFUNC("ixgbe_obtain_mbx_lock_pf");
+
+ /* Take ownership of the buffer */
+ IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_PFU);
+
+ /* reserve mailbox for vf use */
+ p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number));
+ if (p2v_mailbox & IXGBE_PFMAILBOX_PFU)
+ ret_val = IXGBE_SUCCESS;
+ else
+ ERROR_REPORT2(IXGBE_ERROR_POLLING,
+ "Failed to obtain mailbox lock for VF%d", vf_number);
+
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_write_mbx_pf - Places a message in the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+STATIC s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_write_mbx_pf");
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ ixgbe_check_for_msg_pf(hw, vf_number);
+ ixgbe_check_for_ack_pf(hw, vf_number);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, msg[i]);
+
+ /*
+ * Complete the remaining mailbox data registers with zero to reset
+ * the data sent in a previous exchange (in either side) with the VF,
+ * including exchanges performed by another Guest OS to which that VF
+ * was previously assigned.
+ */
+ while (i < hw->mbx.size) {
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, 0);
+ i++;
+ }
+
+ /* Interrupt VF to tell it a message has been sent and release buffer*/
+ IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_STS);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+ return ret_val;
+
+}
+
+/**
+ * ixgbe_read_mbx_pf - Read a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * This function copies a message from the mailbox buffer to the caller's
+ * memory buffer. The presumption is that the caller knows that there was
+ * a message due to a VF request so no polling for message is needed.
+ **/
+STATIC s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ DEBUGFUNC("ixgbe_read_mbx_pf");
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i);
+
+ /* Acknowledge the message and release buffer */
+ IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+/**
+ * ixgbe_init_mbx_params_pf - set initial values for pf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+ if (hw->mac.type != ixgbe_mac_82599EB &&
+ hw->mac.type != ixgbe_mac_X550 &&
+ hw->mac.type != ixgbe_mac_X550EM_x &&
+ hw->mac.type != ixgbe_mac_X540)
+ return;
+
+ mbx->timeout = 0;
+ mbx->usec_delay = 0;
+
+ mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+ mbx->ops.read = ixgbe_read_mbx_pf;
+ mbx->ops.write = ixgbe_write_mbx_pf;
+ mbx->ops.read_posted = ixgbe_read_posted_mbx;
+ mbx->ops.write_posted = ixgbe_write_posted_mbx;
+ mbx->ops.check_for_msg = ixgbe_check_for_msg_pf;
+ mbx->ops.check_for_ack = ixgbe_check_for_ack_pf;
+ mbx->ops.check_for_rst = ixgbe_check_for_rst_pf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+}
new file mode 100644
@@ -0,0 +1,150 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_MBX_H_
+#define _IXGBE_MBX_H_
+
+#include "ixgbe_type.h"
+
+#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+#define IXGBE_ERR_MBX -100
+
+#define IXGBE_VFMAILBOX 0x002FC
+#define IXGBE_VFMBMEM 0x00200
+
+/* Define mailbox register bits */
+#define IXGBE_VFMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
+#define IXGBE_VFMAILBOX_ACK 0x00000002 /* Ack PF message received */
+#define IXGBE_VFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
+#define IXGBE_VFMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
+#define IXGBE_VFMAILBOX_RSTI 0x00000040 /* PF has reset indication */
+#define IXGBE_VFMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
+#define IXGBE_VFMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
+
+#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */
+#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
+#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
+
+#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
+#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
+#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
+#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
+
+
+/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is IXGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
+ * this are the ACK */
+#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
+ * this are the NACK */
+#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
+ * clear to send requests */
+#define IXGBE_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for extra info for certain messages */
+#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT)
+
+/* definitions to support mailbox API version negotiation */
+
+/*
+ * each element denotes a version of the API; existing numbers may not
+ * change; any additions must go at the end
+ */
+enum ixgbe_pfvf_api_rev {
+ ixgbe_mbox_api_10, /* API version 1.0, linux/freebsd VF driver */
+ ixgbe_mbox_api_20, /* API version 2.0, solaris Phase1 VF driver */
+ ixgbe_mbox_api_11, /* API version 1.1, linux/freebsd VF driver */
+ /* This value should always be last */
+ ixgbe_mbox_api_unknown, /* indicates that API version is not known */
+};
+
+/* mailbox API, legacy requests */
+#define IXGBE_VF_RESET 0x01 /* VF requests reset */
+#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
+#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
+#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
+
+/* mailbox API, version 1.0 VF requests */
+#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
+#define IXGBE_VF_API_NEGOTIATE 0x08 /* negotiate API version */
+
+/* mailbox API, version 1.1 VF requests */
+#define IXGBE_VF_GET_QUEUES 0x09 /* get queue configuration */
+
+/* GET_QUEUES return data indices within the mailbox */
+#define IXGBE_VF_TX_QUEUES 1 /* number of Tx queues supported */
+#define IXGBE_VF_RX_QUEUES 2 /* number of Rx queues supported */
+#define IXGBE_VF_TRANS_VLAN 3 /* Indication of port vlan */
+#define IXGBE_VF_DEF_QUEUE 4 /* Default queue offset */
+
+/* length of permanent address message returned from PF */
+#define IXGBE_VF_PERMADDR_MSG_LEN 4
+/* word in permanent address message with the current multicast type */
+#define IXGBE_VF_MC_TYPE_WORD 3
+
+#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+/* mailbox API, version 2.0 VF requests */
+#define IXGBE_VF_API_NEGOTIATE 0x08 /* negotiate API version */
+#define IXGBE_VF_GET_QUEUES 0x09 /* get queue configuration */
+#define IXGBE_VF_ENABLE_MACADDR 0x0A /* enable MAC address */
+#define IXGBE_VF_DISABLE_MACADDR 0x0B /* disable MAC address */
+#define IXGBE_VF_GET_MACADDRS 0x0C /* get all configured MAC addrs */
+#define IXGBE_VF_SET_MCAST_PROMISC 0x0D /* enable multicast promiscuous */
+#define IXGBE_VF_GET_MTU 0x0E /* get bounds on MTU */
+#define IXGBE_VF_SET_MTU 0x0F /* set a specific MTU */
+
+/* mailbox API, version 2.0 PF requests */
+#define IXGBE_PF_TRANSPARENT_VLAN 0x0101 /* enable transparent vlan */
+
+#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
+#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */
+
+s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_read_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16);
+void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw);
+void ixgbe_init_mbx_params_vf(struct ixgbe_hw *);
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
+
+#endif /* _IXGBE_MBX_H_ */
new file mode 100644
@@ -0,0 +1,155 @@
+/******************************************************************************
+
+ Copyright (c) 2001-2015, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+/*$FreeBSD$*/
+
+#ifndef _IXGBE_OS_H_
+#define _IXGBE_OS_H_
+
+#include <string.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <rte_common.h>
+#include <rte_debug.h>
+#include <rte_cycles.h>
+#include <rte_log.h>
+#include <rte_byteorder.h>
+
+#include "../ixgbe_logs.h"
+#include "../ixgbe_bypass_defines.h"
+
+#define ASSERT(x) if(!(x)) rte_panic("IXGBE: x")
+
+#define DELAY(x) rte_delay_us(x)
+#define usec_delay(x) DELAY(x)
+#define msec_delay(x) DELAY(1000*(x))
+
+#define DEBUGFUNC(F) DEBUGOUT(F "\n");
+#define DEBUGOUT(S, args...) PMD_DRV_LOG_RAW(DEBUG, S, ##args)
+#define DEBUGOUT1(S, args...) DEBUGOUT(S, ##args)
+#define DEBUGOUT2(S, args...) DEBUGOUT(S, ##args)
+#define DEBUGOUT3(S, args...) DEBUGOUT(S, ##args)
+#define DEBUGOUT6(S, args...) DEBUGOUT(S, ##args)
+#define DEBUGOUT7(S, args...) DEBUGOUT(S, ##args)
+
+#define ERROR_REPORT1(e, S, args...) DEBUGOUT(S, ##args)
+#define ERROR_REPORT2(e, S, args...) DEBUGOUT(S, ##args)
+#define ERROR_REPORT3(e, S, args...) DEBUGOUT(S, ##args)
+
+#define FALSE 0
+#define TRUE 1
+
+#define false 0
+#define true 1
+#define min(a,b) RTE_MIN(a,b)
+
+#define EWARN(hw, S, args...) DEBUGOUT1(S, ##args)
+
+/* Bunch of defines for shared code bogosity */
+#define UNREFERENCED_PARAMETER(_p)
+#define UNREFERENCED_1PARAMETER(_p)
+#define UNREFERENCED_2PARAMETER(_p, _q)
+#define UNREFERENCED_3PARAMETER(_p, _q, _r)
+#define UNREFERENCED_4PARAMETER(_p, _q, _r, _s)
+
+/* Shared code error reporting */
+enum {
+ IXGBE_ERROR_SOFTWARE,
+ IXGBE_ERROR_POLLING,
+ IXGBE_ERROR_INVALID_STATE,
+ IXGBE_ERROR_UNSUPPORTED,
+ IXGBE_ERROR_ARGUMENT,
+ IXGBE_ERROR_CAUTION,
+};
+
+#define STATIC static
+#define IXGBE_NTOHL(_i) rte_be_to_cpu_32(_i)
+#define IXGBE_NTOHS(_i) rte_be_to_cpu_16(_i)
+#define IXGBE_CPU_TO_LE32(_i) rte_cpu_to_le_32(_i)
+#define IXGBE_LE32_TO_CPUS(_i) rte_le_to_cpu_32(_i)
+#define IXGBE_CPU_TO_BE16(_i) rte_cpu_to_be_16(_i)
+#define IXGBE_CPU_TO_BE32(_i) rte_cpu_to_be_32(_i)
+
+typedef uint8_t u8;
+typedef int8_t s8;
+typedef uint16_t u16;
+typedef int16_t s16;
+typedef uint32_t u32;
+typedef int32_t s32;
+typedef uint64_t u64;
+typedef int bool;
+
+#define mb() rte_mb()
+#define wmb() rte_wmb()
+#define rmb() rte_rmb()
+
+#define IOMEM
+
+#define prefetch(x) rte_prefetch0(x)
+
+#define IXGBE_PCI_REG(reg) (*((volatile uint32_t *)(reg)))
+
+static inline uint32_t ixgbe_read_addr(volatile void* addr)
+{
+ return rte_le_to_cpu_32(IXGBE_PCI_REG(addr));
+}
+
+#define IXGBE_PCI_REG_WRITE(reg, value) do { \
+ IXGBE_PCI_REG((reg)) = (rte_cpu_to_le_32(value)); \
+} while(0)
+
+#define IXGBE_PCI_REG_ADDR(hw, reg) \
+ ((volatile uint32_t *)((char *)(hw)->hw_addr + (reg)))
+
+#define IXGBE_PCI_REG_ARRAY_ADDR(hw, reg, index) \
+ IXGBE_PCI_REG_ADDR((hw), (reg) + ((index) << 2))
+
+/* Not implemented !! */
+#define IXGBE_READ_PCIE_WORD(hw, reg) 0
+#define IXGBE_WRITE_PCIE_WORD(hw, reg, value) do { } while(0)
+
+#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
+
+#define IXGBE_READ_REG(hw, reg) \
+ ixgbe_read_addr(IXGBE_PCI_REG_ADDR((hw), (reg)))
+
+#define IXGBE_WRITE_REG(hw, reg, value) \
+ IXGBE_PCI_REG_WRITE(IXGBE_PCI_REG_ADDR((hw), (reg)), (value))
+
+#define IXGBE_READ_REG_ARRAY(hw, reg, index) \
+ IXGBE_PCI_REG(IXGBE_PCI_REG_ARRAY_ADDR((hw), (reg), (index)))
+
+#define IXGBE_WRITE_REG_ARRAY(hw, reg, index, value) \
+ IXGBE_PCI_REG_WRITE(IXGBE_PCI_REG_ARRAY_ADDR((hw), (reg), (index)), (value))
+
+#endif /* _IXGBE_OS_H_ */
new file mode 100644
@@ -0,0 +1,2738 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw);
+STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
+STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
+STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
+STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
+STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
+STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data);
+
+/**
+ * ixgbe_out_i2c_byte_ack - Send I2C byte with ack
+ * @hw: pointer to the hardware structure
+ * @byte: byte to send
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte)
+{
+ s32 status;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte);
+ if (status)
+ return status;
+ return ixgbe_get_i2c_ack(hw);
+}
+
+/**
+ * ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack
+ * @hw: pointer to the hardware structure
+ * @byte: pointer to a u8 to receive the byte
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
+{
+ s32 status;
+
+ status = ixgbe_clock_in_i2c_byte(hw, byte);
+ if (status)
+ return status;
+ /* ACK */
+ return ixgbe_clock_out_i2c_bit(hw, false);
+}
+
+/**
+ * ixgbe_ones_comp_byte_add - Perform one's complement addition
+ * @add1 - addend 1
+ * @add2 - addend 2
+ *
+ * Returns one's complement 8-bit sum.
+ */
+STATIC u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
+{
+ u16 sum = add1 + add2;
+
+ sum = (sum & 0xFF) + (sum >> 8);
+ return sum & 0xFF;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ * @lock: true if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val, bool lock)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ int max_retry = 10;
+ int retry = 0;
+ u8 csum_byte;
+ u8 high_bits;
+ u8 low_bits;
+ u8 reg_high;
+ u8 csum;
+
+ if (hw->mac.type >= ixgbe_mac_X550)
+ max_retry = 3;
+ reg_high = ((reg >> 7) & 0xFE) | 1; /* Indicate read combined */
+ csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+ csum = ~csum;
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+ ixgbe_i2c_start(hw);
+ /* Device Address and write indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr))
+ goto fail;
+ /* Write bits 14:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+ goto fail;
+ /* Write bits 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+ goto fail;
+ /* Write csum */
+ if (ixgbe_out_i2c_byte_ack(hw, csum))
+ goto fail;
+ /* Re-start condition */
+ ixgbe_i2c_start(hw);
+ /* Device Address and read indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr | 1))
+ goto fail;
+ /* Get upper bits */
+ if (ixgbe_in_i2c_byte_ack(hw, &high_bits))
+ goto fail;
+ /* Get low bits */
+ if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
+ goto fail;
+ /* Get csum */
+ if (ixgbe_clock_in_i2c_byte(hw, &csum_byte))
+ goto fail;
+ /* NACK */
+ if (ixgbe_clock_out_i2c_bit(hw, false))
+ goto fail;
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ *val = (high_bits << 8) | low_bits;
+ return 0;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte read combined error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte read combined error.\n");
+ } while (retry < max_retry);
+
+ return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+STATIC s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val)
+{
+ return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+STATIC s32
+ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val)
+{
+ return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ * @lock: true if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 val, bool lock)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ int max_retry = 1;
+ int retry = 0;
+ u8 reg_high;
+ u8 csum;
+
+ reg_high = (reg >> 7) & 0xFE; /* Indicate write combined */
+ csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+ csum = ixgbe_ones_comp_byte_add(csum, val >> 8);
+ csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
+ csum = ~csum;
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+ ixgbe_i2c_start(hw);
+ /* Device Address and write indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr))
+ goto fail;
+ /* Write bits 14:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+ goto fail;
+ /* Write bits 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+ goto fail;
+ /* Write data 15:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, val >> 8))
+ goto fail;
+ /* Write data 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF))
+ goto fail;
+ /* Write csum */
+ if (ixgbe_out_i2c_byte_ack(hw, csum))
+ goto fail;
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return 0;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte write combined error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte write combined error.\n");
+ } while (retry < max_retry);
+
+ return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+STATIC s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
+ u8 addr, u16 reg, u16 val)
+{
+ return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+STATIC s32
+ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
+ u8 addr, u16 reg, u16 val)
+{
+ return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
+/**
+ * ixgbe_init_phy_ops_generic - Inits PHY function ptrs
+ * @hw: pointer to the hardware structure
+ *
+ * Initialize the function pointers.
+ **/
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_phy_info *phy = &hw->phy;
+
+ DEBUGFUNC("ixgbe_init_phy_ops_generic");
+
+ /* PHY */
+ phy->ops.identify = ixgbe_identify_phy_generic;
+ phy->ops.reset = ixgbe_reset_phy_generic;
+ phy->ops.read_reg = ixgbe_read_phy_reg_generic;
+ phy->ops.write_reg = ixgbe_write_phy_reg_generic;
+ phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi;
+ phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi;
+ phy->ops.setup_link = ixgbe_setup_phy_link_generic;
+ phy->ops.setup_link_speed = ixgbe_setup_phy_link_speed_generic;
+ phy->ops.check_link = NULL;
+ phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic;
+ phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_generic;
+ phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_generic;
+ phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_generic;
+ phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_generic;
+ phy->ops.write_i2c_eeprom = ixgbe_write_i2c_eeprom_generic;
+ phy->ops.i2c_bus_clear = ixgbe_i2c_bus_clear;
+ phy->ops.identify_sfp = ixgbe_identify_module_generic;
+ phy->sfp_type = ixgbe_sfp_type_unknown;
+ phy->ops.read_i2c_combined = ixgbe_read_i2c_combined_generic;
+ phy->ops.write_i2c_combined = ixgbe_write_i2c_combined_generic;
+ phy->ops.read_i2c_combined_unlocked =
+ ixgbe_read_i2c_combined_generic_unlocked;
+ phy->ops.write_i2c_combined_unlocked =
+ ixgbe_write_i2c_combined_generic_unlocked;
+ phy->ops.read_i2c_byte_unlocked = ixgbe_read_i2c_byte_generic_unlocked;
+ phy->ops.write_i2c_byte_unlocked =
+ ixgbe_write_i2c_byte_generic_unlocked;
+ phy->ops.check_overtemp = ixgbe_tn_check_overtemp;
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_identify_phy_generic - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 phy_addr;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_identify_phy_generic");
+
+ if (!hw->phy.phy_semaphore_mask) {
+ if (hw->bus.lan_id)
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+ }
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+ hw->phy.addr = phy_addr;
+ ixgbe_get_phy_id(hw);
+ hw->phy.type =
+ ixgbe_get_phy_type_from_id(hw->phy.id);
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &ext_ability);
+ if (ext_ability &
+ (IXGBE_MDIO_PHY_10GBASET_ABILITY |
+ IXGBE_MDIO_PHY_1000BASET_ABILITY))
+ hw->phy.type =
+ ixgbe_phy_cu_unknown;
+ else
+ hw->phy.type =
+ ixgbe_phy_generic;
+ }
+
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ }
+
+ /* Certain media types do not have a phy so an address will not
+ * be found and the code will take this path. Caller has to
+ * decide if it is an error or not.
+ */
+ if (status != IXGBE_SUCCESS) {
+ hw->phy.addr = 0;
+ }
+ } else {
+ status = IXGBE_SUCCESS;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the MMNGC.MNG_VETO bit to see if there are
+ * any constraints on link from manageability. For MAC's that don't
+ * have this bit just return faluse since the link can not be blocked
+ * via this method.
+ **/
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
+{
+ u32 mmngc;
+
+ DEBUGFUNC("ixgbe_check_reset_blocked");
+
+ /* If we don't have this bit, it can't be blocking */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return false;
+
+ mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC);
+ if (mmngc & IXGBE_MMNGC_MNG_VETO) {
+ ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
+ "MNG_VETO bit detected.\n");
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * ixgbe_validate_phy_addr - Determines phy address is valid
+ * @hw: pointer to hardware structure
+ *
+ **/
+bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
+{
+ u16 phy_id = 0;
+ bool valid = false;
+
+ DEBUGFUNC("ixgbe_validate_phy_addr");
+
+ hw->phy.addr = phy_addr;
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
+
+ if (phy_id != 0xFFFF && phy_id != 0x0)
+ valid = true;
+
+ return valid;
+}
+
+/**
+ * ixgbe_get_phy_id - Get the phy type
+ * @hw: pointer to hardware structure
+ *
+ **/
+s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 phy_id_high = 0;
+ u16 phy_id_low = 0;
+
+ DEBUGFUNC("ixgbe_get_phy_id");
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_high);
+
+ if (status == IXGBE_SUCCESS) {
+ hw->phy.id = (u32)(phy_id_high << 16);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_low);
+ hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+ hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_type_from_id - Get the phy type
+ * @hw: pointer to hardware structure
+ *
+ **/
+enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+ enum ixgbe_phy_type phy_type;
+
+ DEBUGFUNC("ixgbe_get_phy_type_from_id");
+
+ switch (phy_id) {
+ case TN1010_PHY_ID:
+ phy_type = ixgbe_phy_tn;
+ break;
+ case X550_PHY_ID1:
+ case X550_PHY_ID2:
+ case X550_PHY_ID3:
+ case X540_PHY_ID:
+ phy_type = ixgbe_phy_aq;
+ break;
+ case QT2022_PHY_ID:
+ phy_type = ixgbe_phy_qt;
+ break;
+ case ATH_PHY_ID:
+ phy_type = ixgbe_phy_nl;
+ break;
+ case X557_PHY_ID:
+ phy_type = ixgbe_phy_x550em_ext_t;
+ break;
+ default:
+ phy_type = ixgbe_phy_unknown;
+ break;
+ }
+
+ DEBUGOUT1("phy type found is %d\n", phy_type);
+ return phy_type;
+}
+
+/**
+ * ixgbe_reset_phy_generic - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u16 ctrl = 0;
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_reset_phy_generic");
+
+ if (hw->phy.type == ixgbe_phy_unknown)
+ status = ixgbe_identify_phy_generic(hw);
+
+ if (status != IXGBE_SUCCESS || hw->phy.type == ixgbe_phy_none)
+ goto out;
+
+ /* Don't reset PHY if it's shut down due to overtemp. */
+ if (!hw->phy.reset_if_overtemp &&
+ (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
+ goto out;
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
+ /*
+ * Perform soft PHY reset to the PHY_XS.
+ * This will cause a soft reset to the PHY
+ */
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ IXGBE_MDIO_PHY_XS_RESET);
+
+ /*
+ * Poll for reset bit to self-clear indicating reset is complete.
+ * Some PHYs could take up to 3 seconds to complete and need about
+ * 1.7 usec delay after the reset is complete.
+ */
+ for (i = 0; i < 30; i++) {
+ msec_delay(100);
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl);
+ if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
+ usec_delay(2);
+ break;
+ }
+ }
+
+ if (ctrl & IXGBE_MDIO_PHY_XS_RESET) {
+ status = IXGBE_ERR_RESET_FAILED;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "PHY reset polling failed to complete.\n");
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
+ * the SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data)
+{
+ u32 i, data, command;
+
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ /*
+ * Address cycle complete, setup and write the read
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ /*
+ * Read operation is complete. Get the data
+ * from MSRWD
+ */
+ data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+ data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+ *phy_data = (u16)(data);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ * using the SWFW lock - this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ s32 status;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_read_phy_reg_generic");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+ status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type,
+ phy_data);
+ hw->mac.ops.release_swfw_sync(hw, gssr);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ * without SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ u32 i, command;
+
+ /* Put the data in the MDI single read and write data register*/
+ IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address cmd didn't complete\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ /*
+ * Address cycle complete, setup and write the write
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY write cmd didn't complete\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ * using SWFW lock- this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ s32 status;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_write_phy_reg_generic");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+ status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type,
+ phy_data);
+ hw->mac.ops.release_swfw_sync(hw, gssr);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_generic - Set and restart auto-neg
+ * @hw: pointer to hardware structure
+ *
+ * Restart auto-negotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
+
+ DEBUGFUNC("ixgbe_setup_phy_link_generic");
+
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (hw->mac.type == ixgbe_mac_X550) {
+ if (speed & IXGBE_LINK_SPEED_5GB_FULL) {
+ /* Set or unset auto-negotiation 5G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_5GB_FULL)
+ autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) {
+ /* Set or unset auto-negotiation 2.5G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_2_5GB_FULL)
+ autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
+ IXGBE_MII_100BASE_T_ADVERTISE_HALF);
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ /* Blocked by MNG FW so don't reset PHY */
+ if (ixgbe_check_reset_blocked(hw))
+ return status;
+
+ /* Restart PHY auto-negotiation. */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+ autoneg_reg |= IXGBE_MII_RESTART;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ **/
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+ DEBUGFUNC("ixgbe_setup_phy_link_speed_generic");
+
+ /*
+ * Clear autoneg_advertised and set new values based on input link
+ * speed.
+ */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_5GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_5GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_2_5GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_2_5GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+ /* Setup link based on the new speed settings */
+ hw->phy.ops.setup_link(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the supported link capabilities by reading the PHY auto
+ * negotiation register.
+ **/
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status;
+ u16 speed_ability;
+
+ DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
+
+ *speed = 0;
+ *autoneg = true;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &speed_ability);
+
+ if (status == IXGBE_SUCCESS) {
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
+ *speed |= IXGBE_LINK_SPEED_100_FULL;
+ }
+
+ /* Internal PHY does not support 100 Mbps */
+ if (hw->mac.type == ixgbe_mac_X550EM_x)
+ *speed &= ~IXGBE_LINK_SPEED_100_FULL;
+
+ if (hw->mac.type == ixgbe_mac_X550) {
+ *speed |= IXGBE_LINK_SPEED_2_5GB_FULL;
+ *speed |= IXGBE_LINK_SPEED_5GB_FULL;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_check_phy_link_tnx - Determine link and speed status
+ * @hw: pointer to hardware structure
+ *
+ * Reads the VS1 register to determine if link is up and the current speed for
+ * the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+
+ DEBUGFUNC("ixgbe_check_phy_link_tnx");
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /*
+ * Check current speed and link status of the PHY register.
+ * This is a vendor specific register and may have to
+ * be changed for other copper PHYs.
+ */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ usec_delay(10);
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ &phy_data);
+ phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+ phy_speed = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+ if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+ *link_up = true;
+ if (phy_speed ==
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_tnx - Set and restart auto-neg
+ * @hw: pointer to hardware structure
+ *
+ * Restart auto-negotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
+
+ DEBUGFUNC("ixgbe_setup_phy_link_tnx");
+
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ /* Blocked by MNG FW so don't reset PHY */
+ if (ixgbe_check_reset_blocked(hw))
+ return status;
+
+ /* Restart PHY auto-negotiation. */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+ autoneg_reg |= IXGBE_MII_RESTART;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_get_phy_firmware_version_tnx");
+
+ status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ firmware_version);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_get_phy_firmware_version_generic");
+
+ status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ firmware_version);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_phy_nl - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
+{
+ u16 phy_offset, control, eword, edata, block_crc;
+ bool end_data = false;
+ u16 list_offset, data_offset;
+ u16 phy_data = 0;
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_reset_phy_nl");
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+
+ /* reset the PHY and poll for completion */
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ (phy_data | IXGBE_MDIO_PHY_XS_RESET));
+
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+ if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
+ break;
+ msec_delay(10);
+ }
+
+ if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
+ DEBUGOUT("PHY reset did not complete.\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+
+ /* Get init offsets */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
+ data_offset++;
+ while (!end_data) {
+ /*
+ * Read control word from PHY init contents offset
+ */
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+ if (ret_val)
+ goto err_eeprom;
+ control = (eword & IXGBE_CONTROL_MASK_NL) >>
+ IXGBE_CONTROL_SHIFT_NL;
+ edata = eword & IXGBE_DATA_MASK_NL;
+ switch (control) {
+ case IXGBE_DELAY_NL:
+ data_offset++;
+ DEBUGOUT1("DELAY: %d MS\n", edata);
+ msec_delay(edata);
+ break;
+ case IXGBE_DATA_NL:
+ DEBUGOUT("DATA:\n");
+ data_offset++;
+ ret_val = hw->eeprom.ops.read(hw, data_offset,
+ &phy_offset);
+ if (ret_val)
+ goto err_eeprom;
+ data_offset++;
+ for (i = 0; i < edata; i++) {
+ ret_val = hw->eeprom.ops.read(hw, data_offset,
+ &eword);
+ if (ret_val)
+ goto err_eeprom;
+ hw->phy.ops.write_reg(hw, phy_offset,
+ IXGBE_TWINAX_DEV, eword);
+ DEBUGOUT2("Wrote %4.4x to %4.4x\n", eword,
+ phy_offset);
+ data_offset++;
+ phy_offset++;
+ }
+ break;
+ case IXGBE_CONTROL_NL:
+ data_offset++;
+ DEBUGOUT("CONTROL:\n");
+ if (edata == IXGBE_CONTROL_EOL_NL) {
+ DEBUGOUT("EOL\n");
+ end_data = true;
+ } else if (edata == IXGBE_CONTROL_SOL_NL) {
+ DEBUGOUT("SOL\n");
+ } else {
+ DEBUGOUT("Bad control value\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ break;
+ default:
+ DEBUGOUT("Bad control type\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+
+err_eeprom:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", data_offset);
+ return IXGBE_ERR_PHY;
+}
+
+/**
+ * ixgbe_identify_module_generic - Identifies module type
+ * @hw: pointer to hardware structure
+ *
+ * Determines HW type and calls appropriate function.
+ **/
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_SFP_NOT_PRESENT;
+
+ DEBUGFUNC("ixgbe_identify_module_generic");
+
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ status = ixgbe_identify_sfp_module_generic(hw);
+ break;
+
+ case ixgbe_media_type_fiber_qsfp:
+ status = ixgbe_identify_qsfp_module_generic(hw);
+ break;
+
+ default:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[3] = {0, 0, 0};
+ u8 cable_tech = 0;
+ u8 cable_spec = 0;
+ u16 enforce_sfp = 0;
+
+ DEBUGFUNC("ixgbe_identify_sfp_module_generic");
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* LAN ID is needed for I2C access */
+ hw->mac.ops.set_lan_id(hw);
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES,
+ &comp_codes_1g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES,
+ &comp_codes_10g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_CABLE_TECHNOLOGY,
+ &cable_tech);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ /* ID Module
+ * =========
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CORE0 - 82599-specific
+ * 4 SFP_DA_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
+ * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
+ * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
+ * 9 SFP_1g_cu_CORE0 - 82599-specific
+ * 10 SFP_1g_cu_CORE1 - 82599-specific
+ * 11 SFP_1g_sx_CORE0 - 82599-specific
+ * 12 SFP_1g_sx_CORE1 - 82599-specific
+ */
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_sr;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_lr;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ } else {
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core1;
+ } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
+ hw->phy.ops.read_i2c_eeprom(
+ hw, IXGBE_SFF_CABLE_SPEC_COMP,
+ &cable_spec);
+ if (cable_spec &
+ IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core1;
+ } else {
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_unknown;
+ }
+ } else if (comp_codes_10g &
+ (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_cu_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_cu_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_sx_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_sx_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_lx_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_lx_core1;
+ } else {
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ }
+ }
+
+ if (hw->phy.sfp_type != stored_sfp_type)
+ hw->phy.sfp_setup_needed = true;
+
+ /* Determine if the SFP+ PHY is dual speed or not. */
+ hw->phy.multispeed_fiber = false;
+ if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+ ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+ hw->phy.multispeed_fiber = true;
+
+ /* Determine PHY vendor */
+ if (hw->phy.type != ixgbe_phy_nl) {
+ hw->phy.id = identifier;
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ switch (vendor_oui) {
+ case IXGBE_SFF_VENDOR_OUI_TYCO:
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_tyco;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_FTL:
+ if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type = ixgbe_phy_sfp_ftl_active;
+ else
+ hw->phy.type = ixgbe_phy_sfp_ftl;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_AVAGO:
+ hw->phy.type = ixgbe_phy_sfp_avago;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_INTEL:
+ hw->phy.type = ixgbe_phy_sfp_intel;
+ break;
+ default:
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_unknown;
+ else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_active_unknown;
+ else
+ hw->phy.type = ixgbe_phy_sfp_unknown;
+ break;
+ }
+ }
+
+ /* Allow any DA cable vendor */
+ if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
+ IXGBE_SFF_DA_ACTIVE_CABLE)) {
+ status = IXGBE_SUCCESS;
+ goto out;
+ }
+
+ /* Verify supported 1G SFP modules */
+ if (comp_codes_10g == 0 &&
+ !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ /* Anything else 82598-based is supported */
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ status = IXGBE_SUCCESS;
+ goto out;
+ }
+
+ ixgbe_get_device_caps(hw, &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
+ !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_sfp_intel) {
+ status = IXGBE_SUCCESS;
+ } else {
+ if (hw->allow_unsupported_sfp == true) {
+ EWARN(hw, "WARNING: Intel (R) Network "
+ "Connections are quality tested "
+ "using Intel (R) Ethernet Optics."
+ " Using untested modules is not "
+ "supported and may cause unstable"
+ " operation or damage to the "
+ "module or the adapter. Intel "
+ "Corporation is not responsible "
+ "for any harm caused by using "
+ "untested modules.\n", status);
+ status = IXGBE_SUCCESS;
+ } else {
+ DEBUGOUT("SFP+ module not supported\n");
+ hw->phy.type =
+ ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ }
+ } else {
+ status = IXGBE_SUCCESS;
+ }
+ }
+
+out:
+ return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ if (hw->phy.type != ixgbe_phy_nl) {
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+ }
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
+ * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current SFP.
+ */
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u8 comp_codes_10g = 0;
+ u8 comp_codes_1g = 0;
+
+ DEBUGFUNC("ixgbe_get_supported_phy_sfp_layer_generic");
+
+ hw->phy.ops.identify_sfp(hw);
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return physical_layer;
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_sfp_passive_tyco:
+ case ixgbe_phy_sfp_passive_unknown:
+ case ixgbe_phy_qsfp_passive_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_phy_sfp_ftl_active:
+ case ixgbe_phy_sfp_active_unknown:
+ case ixgbe_phy_qsfp_active_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+ break;
+ case ixgbe_phy_sfp_avago:
+ case ixgbe_phy_sfp_ftl:
+ case ixgbe_phy_sfp_intel:
+ case ixgbe_phy_sfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
+ break;
+ case ixgbe_phy_qsfp_intel:
+ case ixgbe_phy_qsfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ break;
+ }
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[3] = {0, 0, 0};
+ u16 enforce_sfp = 0;
+ u8 connector = 0;
+ u8 cable_length = 0;
+ u8 device_tech = 0;
+ bool active_cable = false;
+
+ DEBUGFUNC("ixgbe_identify_qsfp_module_generic");
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* LAN ID is needed for I2C access */
+ hw->mac.ops.set_lan_id(hw);
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ hw->phy.id = identifier;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+ &comp_codes_10g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+ &comp_codes_1g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+ hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+ } else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+ } else {
+ if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
+ active_cable = true;
+
+ if (!active_cable) {
+ /* check for active DA cables that pre-date
+ * SFF-8436 v3.6 */
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_CONNECTOR,
+ &connector);
+
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_CABLE_LENGTH,
+ &cable_length);
+
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_DEVICE_TECH,
+ &device_tech);
+
+ if ((connector ==
+ IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
+ (cable_length > 0) &&
+ ((device_tech >> 4) ==
+ IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
+ active_cable = true;
+ }
+
+ if (active_cable) {
+ hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core1;
+ } else {
+ /* unsupported module type */
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+ }
+
+ if (hw->phy.sfp_type != stored_sfp_type)
+ hw->phy.sfp_setup_needed = true;
+
+ /* Determine if the QSFP+ PHY is dual speed or not. */
+ hw->phy.multispeed_fiber = false;
+ if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+ ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+ hw->phy.multispeed_fiber = true;
+
+ /* Determine PHY vendor for optical modules */
+ if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+ hw->phy.type = ixgbe_phy_qsfp_intel;
+ else
+ hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+ ixgbe_get_device_caps(hw, &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_qsfp_intel) {
+ status = IXGBE_SUCCESS;
+ } else {
+ if (hw->allow_unsupported_sfp == true) {
+ EWARN(hw, "WARNING: Intel (R) Network "
+ "Connections are quality tested "
+ "using Intel (R) Ethernet Optics."
+ " Using untested modules is not "
+ "supported and may cause unstable"
+ " operation or damage to the "
+ "module or the adapter. Intel "
+ "Corporation is not responsible "
+ "for any harm caused by using "
+ "untested modules.\n", status);
+ status = IXGBE_SUCCESS;
+ } else {
+ DEBUGOUT("QSFP module not supported\n");
+ hw->phy.type =
+ ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ }
+ } else {
+ status = IXGBE_SUCCESS;
+ }
+ }
+
+out:
+ return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+
+/**
+ * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
+ * @hw: pointer to hardware structure
+ * @list_offset: offset to the SFP ID list
+ * @data_offset: offset to the SFP data block
+ *
+ * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
+ * so it returns the offsets to the phy init sequence block.
+ **/
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+ u16 *list_offset,
+ u16 *data_offset)
+{
+ u16 sfp_id;
+ u16 sfp_type = hw->phy.sfp_type;
+
+ DEBUGFUNC("ixgbe_get_sfp_init_sequence_offsets");
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+
+ if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
+ (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ /*
+ * Limiting active cables and 1G Phys must be initialized as
+ * SR modules
+ */
+ if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_sx_core0)
+ sfp_type = ixgbe_sfp_type_srlr_core0;
+ else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_sx_core1)
+ sfp_type = ixgbe_sfp_type_srlr_core1;
+
+ /* Read offset to PHY init contents */
+ if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ IXGBE_PHY_INIT_OFFSET_NL);
+ return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+ }
+
+ if ((!*list_offset) || (*list_offset == 0xFFFF))
+ return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+
+ /* Shift offset to first ID word */
+ (*list_offset)++;
+
+ /*
+ * Find the matching SFP ID in the EEPROM
+ * and program the init sequence
+ */
+ if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+ goto err_phy;
+
+ while (sfp_id != IXGBE_PHY_INIT_END_NL) {
+ if (sfp_id == sfp_type) {
+ (*list_offset)++;
+ if (hw->eeprom.ops.read(hw, *list_offset, data_offset))
+ goto err_phy;
+ if ((!*data_offset) || (*data_offset == 0xFFFF)) {
+ DEBUGOUT("SFP+ module not supported\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ break;
+ }
+ } else {
+ (*list_offset) += 2;
+ if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+ goto err_phy;
+ }
+ }
+
+ if (sfp_id == IXGBE_PHY_INIT_END_NL) {
+ DEBUGOUT("No matching SFP+ module found\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+
+ return IXGBE_SUCCESS;
+
+err_phy:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", *list_offset);
+ return IXGBE_ERR_PHY;
+}
+
+/**
+ * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ DEBUGFUNC("ixgbe_read_i2c_eeprom_generic");
+
+ return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data)
+{
+ return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ sff8472_data);
+}
+
+/**
+ * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data)
+{
+ DEBUGFUNC("ixgbe_write_i2c_eeprom_generic");
+
+ return hw->phy.ops.write_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_is_sfp_probe - Returns true if SFP is being detected
+ * @hw: pointer to hardware structure
+ * @offset: eeprom offset to be read
+ * @addr: I2C address to be read
+ */
+STATIC bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
+{
+ if (addr == IXGBE_I2C_EEPROM_DEV_ADDR &&
+ offset == IXGBE_SFF_IDENTIFIER &&
+ hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return true;
+ return false;
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ * @lock: true if to take and release semaphore
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data, bool lock)
+{
+ s32 status;
+ u32 max_retry = 10;
+ u32 retry = 0;
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ bool nack = 1;
+ *data = 0;
+
+ DEBUGFUNC("ixgbe_read_i2c_byte_generic");
+
+ if (hw->mac.type >= ixgbe_mac_X550)
+ max_retry = 3;
+ if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr))
+ max_retry = IXGBE_SFP_DETECT_RETRIES;
+
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and write indication */
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and read indication */
+ status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_in_i2c_byte(hw, data);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_bit(hw, nack);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return IXGBE_SUCCESS;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock) {
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msec_delay(100);
+ }
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte read error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte read error.\n");
+
+ } while (retry < max_retry);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, true);
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, false);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ * @lock: true if to take and release semaphore
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data, bool lock)
+{
+ s32 status;
+ u32 max_retry = 1;
+ u32 retry = 0;
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_write_i2c_byte_generic");
+
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) !=
+ IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ do {
+ ixgbe_i2c_start(hw);
+
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, data);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return IXGBE_SUCCESS;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte write error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte write error.\n");
+ } while (retry < max_retry);
+
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, true);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, false);
+}
+
+/**
+ * ixgbe_i2c_start - Sets I2C start condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C start condition (High -> Low on SDA while SCL is High)
+ * Set bit-bang mode on X550 hardware.
+ **/
+STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+ DEBUGFUNC("ixgbe_i2c_start");
+
+ i2cctl |= IXGBE_I2C_BB_EN_BY_MAC(hw);
+
+ /* Start condition must begin with data and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for start condition (4.7us) */
+ usec_delay(IXGBE_I2C_T_SU_STA);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+
+ /* Hold time for start condition (4us) */
+ usec_delay(IXGBE_I2C_T_HD_STA);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ usec_delay(IXGBE_I2C_T_LOW);
+
+}
+
+/**
+ * ixgbe_i2c_stop - Sets I2C stop condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ * Disables bit-bang mode and negates data output enable on X550
+ * hardware.
+ **/
+STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+ u32 bb_en_bit = IXGBE_I2C_BB_EN_BY_MAC(hw);
+
+ DEBUGFUNC("ixgbe_i2c_stop");
+
+ /* Stop condition must begin with data low and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for stop condition (4us) */
+ usec_delay(IXGBE_I2C_T_SU_STO);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ /* bus free time between stop and start (4.7us)*/
+ usec_delay(IXGBE_I2C_T_BUF);
+
+ if (bb_en_bit || data_oe_bit || clk_oe_bit) {
+ i2cctl &= ~bb_en_bit;
+ i2cctl |= data_oe_bit | clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+}
+
+/**
+ * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte to clock in
+ *
+ * Clocks in one byte data via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
+{
+ s32 i;
+ bool bit = 0;
+
+ DEBUGFUNC("ixgbe_clock_in_i2c_byte");
+
+ *data = 0;
+ for (i = 7; i >= 0; i--) {
+ ixgbe_clock_in_i2c_bit(hw, &bit);
+ *data |= bit << i;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte clocked out
+ *
+ * Clocks out one byte data via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
+{
+ s32 status = IXGBE_SUCCESS;
+ s32 i;
+ u32 i2cctl;
+ bool bit;
+
+ DEBUGFUNC("ixgbe_clock_out_i2c_byte");
+
+ for (i = 7; i >= 0; i--) {
+ bit = (data >> i) & 0x1;
+ status = ixgbe_clock_out_i2c_bit(hw, bit);
+
+ if (status != IXGBE_SUCCESS)
+ break;
+ }
+
+ /* Release SDA line (set high) */
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_ack - Polls for I2C ACK
+ * @hw: pointer to hardware structure
+ *
+ * Clocks in/out one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
+{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ s32 status = IXGBE_SUCCESS;
+ u32 i = 0;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 timeout = 10;
+ bool ack = 1;
+
+ DEBUGFUNC("ixgbe_get_i2c_ack");
+
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ /* Poll for ACK. Note that ACK in I2C spec is
+ * transition from 1 to 0 */
+ for (i = 0; i < timeout; i++) {
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ ack = ixgbe_get_i2c_data(hw, &i2cctl);
+
+ usec_delay(1);
+ if (!ack)
+ break;
+ }
+
+ if (ack) {
+ DEBUGOUT("I2C ack was not received.\n");
+ status = IXGBE_ERR_I2C;
+ }
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ usec_delay(IXGBE_I2C_T_LOW);
+
+ return status;
+}
+
+/**
+ * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: read data value
+ *
+ * Clocks in one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+
+ DEBUGFUNC("ixgbe_clock_in_i2c_bit");
+
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ *data = ixgbe_get_i2c_data(hw, &i2cctl);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ usec_delay(IXGBE_I2C_T_LOW);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: data value to write
+ *
+ * Clocks out one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
+{
+ s32 status;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+ DEBUGFUNC("ixgbe_clock_out_i2c_bit");
+
+ status = ixgbe_set_i2c_data(hw, &i2cctl, data);
+ if (status == IXGBE_SUCCESS) {
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us.
+ * This also takes care of the data hold time.
+ */
+ usec_delay(IXGBE_I2C_T_LOW);
+ } else {
+ status = IXGBE_ERR_I2C;
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "I2C data was not set to %X\n", data);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Raises the I2C clock line '0'->'1'
+ * Negates the I2C clock output enable on X550 hardware.
+ **/
+STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+ u32 i = 0;
+ u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT;
+ u32 i2cctl_r = 0;
+
+ DEBUGFUNC("ixgbe_raise_i2c_clk");
+
+ if (clk_oe_bit) {
+ *i2cctl |= clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ }
+
+ for (i = 0; i < timeout; i++) {
+ *i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ /* SCL rise time (1000ns) */
+ usec_delay(IXGBE_I2C_T_RISE);
+
+ i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw))
+ break;
+ }
+}
+
+/**
+ * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Lowers the I2C clock line '1'->'0'
+ * Asserts the I2C clock output enable on X550 hardware.
+ **/
+STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ DEBUGFUNC("ixgbe_lower_i2c_clk");
+
+ *i2cctl &= ~(IXGBE_I2C_CLK_OUT_BY_MAC(hw));
+ *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* SCL fall time (300ns) */
+ usec_delay(IXGBE_I2C_T_FALL);
+}
+
+/**
+ * ixgbe_set_i2c_data - Sets the I2C data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ * @data: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ * Asserts the I2C data output enable on X550 hardware.
+ **/
+STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
+{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_set_i2c_data");
+
+ if (data)
+ *i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ else
+ *i2cctl &= ~(IXGBE_I2C_DATA_OUT_BY_MAC(hw));
+ *i2cctl &= ~data_oe_bit;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+ usec_delay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+
+ if (!data) /* Can't verify data in this case */
+ return IXGBE_SUCCESS;
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ /* Verify data was set correctly */
+ *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
+ status = IXGBE_ERR_I2C;
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "Error - I2C data was not set to %X.\n",
+ data);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ * Negates the I2C data output enable on X550 hardware.
+ **/
+STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ bool data;
+
+ DEBUGFUNC("ixgbe_get_i2c_data");
+
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(IXGBE_I2C_T_FALL);
+ }
+
+ if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw))
+ data = 1;
+ else
+ data = 0;
+
+ return data;
+}
+
+/**
+ * ixgbe_i2c_bus_clear - Clears the I2C bus
+ * @hw: pointer to hardware structure
+ *
+ * Clears the I2C bus by sending nine clock pulses.
+ * Used when data line is stuck low.
+ **/
+void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
+{
+ u32 i2cctl;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_i2c_bus_clear");
+
+ ixgbe_i2c_start(hw);
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ for (i = 0; i < 9; i++) {
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Min high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Min low period of clock is 4.7us*/
+ usec_delay(IXGBE_I2C_T_LOW);
+ }
+
+ ixgbe_i2c_start(hw);
+
+ /* Put the i2c bus back to default state */
+ ixgbe_i2c_stop(hw);
+}
+
+/**
+ * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
+ * @hw: pointer to hardware structure
+ *
+ * Checks if the LASI temp alarm status was triggered due to overtemp
+ **/
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 phy_data = 0;
+
+ DEBUGFUNC("ixgbe_tn_check_overtemp");
+
+ if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
+ goto out;
+
+ /* Check that the LASI temp alarm status was triggered */
+ hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data);
+
+ if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
+ goto out;
+
+ status = IXGBE_ERR_OVERTEMP;
+ ERROR_REPORT1(IXGBE_ERROR_CAUTION, "Device over temperature");
+out:
+ return status;
+}
+
+/**
+ * ixgbe_set_copper_phy_power - Control power for copper phy
+ * @hw: pointer to hardware structure
+ * @on: true for on, false for off
+ */
+s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
+{
+ u32 status;
+ u16 reg;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+ if (status)
+ return status;
+
+ if (on) {
+ reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+ } else {
+ if (ixgbe_check_reset_blocked(hw))
+ return 0;
+ reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+ }
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+ return status;
+}
new file mode 100644
@@ -0,0 +1,207 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_PHY_H_
+#define _IXGBE_PHY_H_
+
+#include "ixgbe_type.h"
+#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
+#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2
+#define IXGBE_I2C_EEPROM_BANK_LEN 0xFF
+
+/* EEPROM byte offsets */
+#define IXGBE_SFF_IDENTIFIER 0x0
+#define IXGBE_SFF_IDENTIFIER_SFP 0x3
+#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
+#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
+#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
+#define IXGBE_SFF_1GBE_COMP_CODES 0x6
+#define IXGBE_SFF_10GBE_COMP_CODES 0x3
+#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
+#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C
+#define IXGBE_SFF_SFF_8472_SWAP 0x5C
+#define IXGBE_SFF_SFF_8472_COMP 0x5E
+#define IXGBE_SFF_SFF_8472_OSCB 0x6E
+#define IXGBE_SFF_SFF_8472_ESCB 0x76
+#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS 0xD
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0 0xA5
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1 0xA6
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2 0xA7
+#define IXGBE_SFF_QSFP_CONNECTOR 0x82
+#define IXGBE_SFF_QSFP_10GBE_COMP 0x83
+#define IXGBE_SFF_QSFP_1GBE_COMP 0x86
+#define IXGBE_SFF_QSFP_CABLE_LENGTH 0x92
+#define IXGBE_SFF_QSFP_DEVICE_TECH 0x93
+
+/* Bitmasks */
+#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
+#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8
+#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4
+#define IXGBE_SFF_1GBASESX_CAPABLE 0x1
+#define IXGBE_SFF_1GBASELX_CAPABLE 0x2
+#define IXGBE_SFF_1GBASET_CAPABLE 0x8
+#define IXGBE_SFF_10GBASESR_CAPABLE 0x10
+#define IXGBE_SFF_10GBASELR_CAPABLE 0x20
+#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8
+#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
+#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
+#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
+#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
+#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
+#define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL 0x0
+#define IXGBE_I2C_EEPROM_READ_MASK 0x100
+#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
+#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
+#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
+#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
+#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
+
+#define IXGBE_CS4227 0xBE /* CS4227 address */
+#define IXGBE_CS4227_GLOBAL_ID_LSB 0
+#define IXGBE_CS4227_SCRATCH 2
+#define IXGBE_CS4227_GLOBAL_ID_VALUE 0x03E5
+#define IXGBE_CS4227_SCRATCH_VALUE 0x5aa5
+#define IXGBE_CS4227_RETRIES 5
+#define IXGBE_CS4227_LINE_SPARE22_MSB 0x12AD /* Reg to program speed */
+#define IXGBE_CS4227_LINE_SPARE24_LSB 0x12B0 /* Reg to program EDC */
+#define IXGBE_CS4227_HOST_SPARE22_MSB 0x1AAD /* Reg to program speed */
+#define IXGBE_CS4227_HOST_SPARE24_LSB 0x1AB0 /* Reg to program EDC */
+#define IXGBE_CS4227_SPEED_1G 0x8000
+#define IXGBE_CS4227_SPEED_10G 0
+#define IXGBE_CS4227_EDC_MODE_CX1 0x0002
+#define IXGBE_CS4227_EDC_MODE_SR 0x0004
+#define IXGBE_CS4227_RESET_HOLD 500 /* microseconds */
+#define IXGBE_CS4227_RESET_DELAY 500 /* milliseconds */
+#define IXGBE_CS4227_CHECK_DELAY 30 /* milliseconds */
+#define IXGBE_PE 0xE0 /* Port expander address */
+#define IXGBE_PE_OUTPUT 1 /* Output register offset */
+#define IXGBE_PE_CONFIG 3 /* Config register offset */
+#define IXGBE_PE_BIT1 (1 << 1)
+
+/* Flow control defines */
+#define IXGBE_TAF_SYM_PAUSE 0x400
+#define IXGBE_TAF_ASM_PAUSE 0x800
+
+/* Bit-shift macros */
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
+#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
+#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
+#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
+
+/* I2C SDA and SCL timing parameters for standard mode */
+#define IXGBE_I2C_T_HD_STA 4
+#define IXGBE_I2C_T_LOW 5
+#define IXGBE_I2C_T_HIGH 4
+#define IXGBE_I2C_T_SU_STA 5
+#define IXGBE_I2C_T_HD_DATA 5
+#define IXGBE_I2C_T_SU_DATA 1
+#define IXGBE_I2C_T_RISE 1
+#define IXGBE_I2C_T_FALL 1
+#define IXGBE_I2C_T_SU_STO 4
+#define IXGBE_I2C_T_BUF 5
+
+#ifndef IXGBE_SFP_DETECT_RETRIES
+#define IXGBE_SFP_DETECT_RETRIES 10
+
+#endif /* IXGBE_SFP_DETECT_RETRIES */
+#define IXGBE_TN_LASI_STATUS_REG 0x9005
+#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008
+
+/* SFP+ SFF-8472 Compliance */
+#define IXGBE_SFF_SFF_8472_UNSUP 0x00
+
+#ident "$Id: ixgbe_phy.h,v 1.56 2013/09/05 23:59:49 jtkirshe Exp $"
+
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
+bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
+enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
+s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data);
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 phy_data);
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data);
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw);
+
+/* PHY specific */
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up);
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw);
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+ u16 *firmware_version);
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+ u16 *firmware_version);
+
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
+s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on);
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+ u16 *list_offset,
+ u16 *data_offset);
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
+s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data);
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data);
+void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
+#endif /* _IXGBE_PHY_H_ */
new file mode 100644
@@ -0,0 +1,4033 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_TYPE_H_
+#define _IXGBE_TYPE_H_
+
+/*
+ * The following is a brief description of the error categories used by the
+ * ERROR_REPORT* macros.
+ *
+ * - IXGBE_ERROR_INVALID_STATE
+ * This category is for errors which represent a serious failure state that is
+ * unexpected, and could be potentially harmful to device operation. It should
+ * not be used for errors relating to issues that can be worked around or
+ * ignored.
+ *
+ * - IXGBE_ERROR_POLLING
+ * This category is for errors related to polling/timeout issues and should be
+ * used in any case where the timeout occured, or a failure to obtain a lock, or
+ * failure to receive data within the time limit.
+ *
+ * - IXGBE_ERROR_CAUTION
+ * This category should be used for reporting issues that may be the cause of
+ * other errors, such as temperature warnings. It should indicate an event which
+ * could be serious, but hasn't necessarily caused problems yet.
+ *
+ * - IXGBE_ERROR_SOFTWARE
+ * This category is intended for errors due to software state preventing
+ * something. The category is not intended for errors due to bad arguments, or
+ * due to unsupported features. It should be used when a state occurs which
+ * prevents action but is not a serious issue.
+ *
+ * - IXGBE_ERROR_ARGUMENT
+ * This category is for when a bad or invalid argument is passed. It should be
+ * used whenever a function is called and error checking has detected the
+ * argument is wrong or incorrect.
+ *
+ * - IXGBE_ERROR_UNSUPPORTED
+ * This category is for errors which are due to unsupported circumstances or
+ * configuration issues. It should not be used when the issue is due to an
+ * invalid argument, but for when something has occurred that is unsupported
+ * (Ex: Flow control autonegotiation or an unsupported SFP+ module.)
+ */
+
+#include "ixgbe_osdep.h"
+
+/* Override this by setting IOMEM in your ixgbe_osdep.h header */
+
+/* Vendor ID */
+#define IXGBE_INTEL_VENDOR_ID 0x8086
+
+/* Device IDs */
+#define IXGBE_DEV_ID_82598 0x10B6
+#define IXGBE_DEV_ID_82598_BX 0x1508
+#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6
+#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
+#define IXGBE_DEV_ID_82598AT 0x10C8
+#define IXGBE_DEV_ID_82598AT2 0x150B
+#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB
+#define IXGBE_DEV_ID_82598EB_CX4 0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
+#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1
+#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1
+#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4
+#define IXGBE_DEV_ID_82599_KX4 0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514
+#define IXGBE_DEV_ID_82599_KR 0x1517
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
+#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C
+#define IXGBE_DEV_ID_82599_CX4 0x10F9
+#define IXGBE_DEV_ID_82599_SFP 0x10FB
+#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9
+#define IXGBE_SUBDEV_ID_82599_SFP_WOL0 0x1071
+#define IXGBE_SUBDEV_ID_82599_RNDC 0x1F72
+#define IXGBE_SUBDEV_ID_82599_560FLR 0x17D0
+#define IXGBE_SUBDEV_ID_82599_ECNA_DP 0x0470
+#define IXGBE_SUBDEV_ID_82599_SP_560FLR 0x211B
+#define IXGBE_SUBDEV_ID_82599_LOM_SFP 0x8976
+#define IXGBE_SUBDEV_ID_82599_LOM_SNAP6 0x2159
+#define IXGBE_SUBDEV_ID_82599_SFP_1OCP 0x000D
+#define IXGBE_SUBDEV_ID_82599_SFP_2OCP 0x0008
+#define IXGBE_SUBDEV_ID_82599_SFP_LOM 0x06EE
+#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE 0x152A
+#define IXGBE_DEV_ID_82599_SFP_FCOE 0x1529
+#define IXGBE_DEV_ID_82599_SFP_EM 0x1507
+#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D
+#define IXGBE_DEV_ID_82599_SFP_SF_QP 0x154A
+#define IXGBE_DEV_ID_82599_QSFP_SF_QP 0x1558
+#define IXGBE_DEV_ID_82599EN_SFP 0x1557
+#define IXGBE_SUBDEV_ID_82599EN_SFP_OCP1 0x0001
+#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
+#define IXGBE_DEV_ID_82599_T3_LOM 0x151C
+#define IXGBE_DEV_ID_82599_VF 0x10ED
+#define IXGBE_DEV_ID_82599_VF_HV 0x152E
+#define IXGBE_DEV_ID_82599_LS 0x154F
+#define IXGBE_DEV_ID_X540T 0x1528
+#define IXGBE_DEV_ID_X540_VF 0x1515
+#define IXGBE_DEV_ID_X540_VF_HV 0x1530
+#define IXGBE_DEV_ID_X540T1 0x1560
+#define IXGBE_DEV_ID_X550T 0x1563
+#define IXGBE_DEV_ID_X550EM_X_KX4 0x15AA
+#define IXGBE_DEV_ID_X550EM_X_KR 0x15AB
+#define IXGBE_DEV_ID_X550EM_X_SFP 0x15AC
+#define IXGBE_DEV_ID_X550EM_X_10G_T 0x15AD
+#define IXGBE_DEV_ID_X550EM_X_1G_T 0x15AE
+#define IXGBE_DEV_ID_X550_VF_HV 0x1564
+#define IXGBE_DEV_ID_X550_VF 0x1565
+#define IXGBE_DEV_ID_X550EM_X_VF 0x15A8
+#define IXGBE_DEV_ID_X550EM_X_VF_HV 0x15A9
+
+#define IXGBE_CAT(r, m) IXGBE_##r##m
+
+#define IXGBE_BY_MAC(_hw, r) ((_hw)->mvals[IXGBE_CAT(r, _IDX)])
+
+/* General Registers */
+#define IXGBE_CTRL 0x00000
+#define IXGBE_STATUS 0x00008
+#define IXGBE_CTRL_EXT 0x00018
+#define IXGBE_ESDP 0x00020
+#define IXGBE_EODSDP 0x00028
+#define IXGBE_I2CCTL_82599 0x00028
+#define IXGBE_I2CCTL IXGBE_I2CCTL_82599
+#define IXGBE_I2CCTL_X540 IXGBE_I2CCTL_82599
+#define IXGBE_I2CCTL_X550 0x15F5C
+#define IXGBE_I2CCTL_X550EM_x IXGBE_I2CCTL_X550
+#define IXGBE_I2CCTL_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2CCTL)
+#define IXGBE_PHY_GPIO 0x00028
+#define IXGBE_MAC_GPIO 0x00030
+#define IXGBE_PHYINT_STATUS0 0x00100
+#define IXGBE_PHYINT_STATUS1 0x00104
+#define IXGBE_PHYINT_STATUS2 0x00108
+#define IXGBE_LEDCTL 0x00200
+#define IXGBE_FRTIMER 0x00048
+#define IXGBE_TCPTIMER 0x0004C
+#define IXGBE_CORESPARE 0x00600
+#define IXGBE_EXVET 0x05078
+
+/* NVM Registers */
+#define IXGBE_EEC 0x10010
+#define IXGBE_EEC_X540 IXGBE_EEC
+#define IXGBE_EEC_X550 IXGBE_EEC
+#define IXGBE_EEC_X550EM_x IXGBE_EEC
+#define IXGBE_EEC_BY_MAC(_hw) IXGBE_EEC
+
+#define IXGBE_EERD 0x10014
+#define IXGBE_EEWR 0x10018
+
+#define IXGBE_FLA 0x1001C
+#define IXGBE_FLA_X540 IXGBE_FLA
+#define IXGBE_FLA_X550 IXGBE_FLA
+#define IXGBE_FLA_X550EM_x IXGBE_FLA
+#define IXGBE_FLA_BY_MAC(_hw) IXGBE_FLA
+
+#define IXGBE_EEMNGCTL 0x10110
+#define IXGBE_EEMNGDATA 0x10114
+#define IXGBE_FLMNGCTL 0x10118
+#define IXGBE_FLMNGDATA 0x1011C
+#define IXGBE_FLMNGCNT 0x10120
+#define IXGBE_FLOP 0x1013C
+
+#define IXGBE_GRC 0x10200
+#define IXGBE_GRC_X540 IXGBE_GRC
+#define IXGBE_GRC_X550 IXGBE_GRC
+#define IXGBE_GRC_X550EM_x IXGBE_GRC
+#define IXGBE_GRC_BY_MAC(_hw) IXGBE_GRC
+
+#define IXGBE_SRAMREL 0x10210
+#define IXGBE_SRAMREL_X540 IXGBE_SRAMREL
+#define IXGBE_SRAMREL_X550 IXGBE_SRAMREL
+#define IXGBE_SRAMREL_X550EM_x IXGBE_SRAMREL
+#define IXGBE_SRAMREL_BY_MAC(_hw) IXGBE_SRAMREL
+
+#define IXGBE_PHYDBG 0x10218
+
+/* General Receive Control */
+#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */
+#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */
+
+#define IXGBE_VPDDIAG0 0x10204
+#define IXGBE_VPDDIAG1 0x10208
+
+/* I2CCTL Bit Masks */
+#define IXGBE_I2C_CLK_IN 0x00000001
+#define IXGBE_I2C_CLK_IN_X540 IXGBE_I2C_CLK_IN
+#define IXGBE_I2C_CLK_IN_X550 0x00004000
+#define IXGBE_I2C_CLK_IN_X550EM_x IXGBE_I2C_CLK_IN_X550
+#define IXGBE_I2C_CLK_IN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_CLK_IN)
+
+#define IXGBE_I2C_CLK_OUT 0x00000002
+#define IXGBE_I2C_CLK_OUT_X540 IXGBE_I2C_CLK_OUT
+#define IXGBE_I2C_CLK_OUT_X550 0x00000200
+#define IXGBE_I2C_CLK_OUT_X550EM_x IXGBE_I2C_CLK_OUT_X550
+#define IXGBE_I2C_CLK_OUT_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_CLK_OUT)
+
+#define IXGBE_I2C_DATA_IN 0x00000004
+#define IXGBE_I2C_DATA_IN_X540 IXGBE_I2C_DATA_IN
+#define IXGBE_I2C_DATA_IN_X550 0x00001000
+#define IXGBE_I2C_DATA_IN_X550EM_x IXGBE_I2C_DATA_IN_X550
+#define IXGBE_I2C_DATA_IN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_DATA_IN)
+
+#define IXGBE_I2C_DATA_OUT 0x00000008
+#define IXGBE_I2C_DATA_OUT_X540 IXGBE_I2C_DATA_OUT
+#define IXGBE_I2C_DATA_OUT_X550 0x00000400
+#define IXGBE_I2C_DATA_OUT_X550EM_x IXGBE_I2C_DATA_OUT_X550
+#define IXGBE_I2C_DATA_OUT_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_DATA_OUT)
+
+#define IXGBE_I2C_DATA_OE_N_EN 0
+#define IXGBE_I2C_DATA_OE_N_EN_X540 IXGBE_I2C_DATA_OE_N_EN
+#define IXGBE_I2C_DATA_OE_N_EN_X550 0x00000800
+#define IXGBE_I2C_DATA_OE_N_EN_X550EM_x IXGBE_I2C_DATA_OE_N_EN_X550
+#define IXGBE_I2C_DATA_OE_N_EN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_DATA_OE_N_EN)
+
+#define IXGBE_I2C_BB_EN 0
+#define IXGBE_I2C_BB_EN_X540 IXGBE_I2C_BB_EN
+#define IXGBE_I2C_BB_EN_X550 0x00000100
+#define IXGBE_I2C_BB_EN_X550EM_x IXGBE_I2C_BB_EN_X550
+
+#define IXGBE_I2C_BB_EN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_BB_EN)
+
+#define IXGBE_I2C_CLK_OE_N_EN 0
+#define IXGBE_I2C_CLK_OE_N_EN_X540 IXGBE_I2C_CLK_OE_N_EN
+#define IXGBE_I2C_CLK_OE_N_EN_X550 0x00002000
+#define IXGBE_I2C_CLK_OE_N_EN_X550EM_x IXGBE_I2C_CLK_OE_N_EN_X550
+#define IXGBE_I2C_CLK_OE_N_EN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), I2C_CLK_OE_N_EN)
+#define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT 500
+
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define IXGBE_EMC_INTERNAL_DATA 0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA 0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
+#define IXGBE_EMC_DIODE2_DATA 0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
+
+#define IXGBE_MAX_SENSORS 3
+
+struct ixgbe_thermal_diode_data {
+ u8 location;
+ u8 temp;
+ u8 caution_thresh;
+ u8 max_op_thresh;
+};
+
+struct ixgbe_thermal_sensor_data {
+ struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
+};
+
+/* Interrupt Registers */
+#define IXGBE_EICR 0x00800
+#define IXGBE_EICS 0x00808
+#define IXGBE_EIMS 0x00880
+#define IXGBE_EIMC 0x00888
+#define IXGBE_EIAC 0x00810
+#define IXGBE_EIAM 0x00890
+#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4)
+#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4)
+#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4)
+#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4)
+/* 82599 EITR is only 12 bits, with the lower 3 always zero */
+/*
+ * 82598 EITR is 16 bits but set the limits based on the max
+ * supported by all ixgbe hardware
+ */
+#define IXGBE_MAX_INT_RATE 488281
+#define IXGBE_MIN_INT_RATE 956
+#define IXGBE_MAX_EITR 0x00000FF8
+#define IXGBE_MIN_EITR 8
+#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \
+ (0x012300 + (((_i) - 24) * 4)))
+#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8
+#define IXGBE_EITR_LLI_MOD 0x00008000
+#define IXGBE_EITR_CNT_WDIS 0x80000000
+#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
+#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */
+#define IXGBE_EITRSEL 0x00894
+#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */
+#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */
+#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4)))
+#define IXGBE_GPIE 0x00898
+
+/* Flow Control Registers */
+#define IXGBE_FCADBUL 0x03210
+#define IXGBE_FCADBUH 0x03214
+#define IXGBE_FCAMACL 0x04328
+#define IXGBE_FCAMACH 0x0432C
+#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_PFCTOP 0x03008
+#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTV 0x032A0
+#define IXGBE_FCCFG 0x03D00
+#define IXGBE_TFCS 0x0CE00
+
+/* Receive DMA Registers */
+#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \
+ (0x0D000 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \
+ (0x0D004 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \
+ (0x0D008 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \
+ (0x0D010 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \
+ (0x0D018 + (((_i) - 64) * 0x40)))
+#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
+ (0x0D028 + (((_i) - 64) * 0x40)))
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+ (0x0D02C + (((_i) - 64) * 0x40)))
+#define IXGBE_RSCDBU 0x03028
+#define IXGBE_RDDCC 0x02F20
+#define IXGBE_RXMEMWRAP 0x03190
+#define IXGBE_STARCTRL 0x03024
+/*
+ * Split and Replication Receive Control Registers
+ * 00-15 : 0x02100 + n*4
+ * 16-64 : 0x01014 + n*0x40
+ * 64-127: 0x0D014 + (n-64)*0x40
+ */
+#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \
+ (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \
+ (0x0D014 + (((_i) - 64) * 0x40))))
+/*
+ * Rx DCA Control Register:
+ * 00-15 : 0x02200 + n*4
+ * 16-64 : 0x0100C + n*0x40
+ * 64-127: 0x0D00C + (n-64)*0x40
+ */
+#define IXGBE_DCA_RXCTRL(_i) (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \
+ (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \
+ (0x0D00C + (((_i) - 64) * 0x40))))
+#define IXGBE_RDRXCTL 0x02F00
+/* 8 of these 0x03C00 - 0x03C1C */
+#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4))
+#define IXGBE_RXCTRL 0x03000
+#define IXGBE_DROPEN 0x03D04
+#define IXGBE_RXPBSIZE_SHIFT 10
+#define IXGBE_RXPBSIZE_MASK 0x000FFC00
+
+/* Receive Registers */
+#define IXGBE_RXCSUM 0x05000
+#define IXGBE_RFCTL 0x05008
+#define IXGBE_DRECCCTL 0x02F08
+#define IXGBE_DRECCCTL_DISABLE 0
+#define IXGBE_DRECCCTL2 0x02F8C
+
+/* Multicast Table Array - 128 entries */
+#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4))
+#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x0A200 + ((_i) * 8)))
+#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x0A204 + ((_i) * 8)))
+#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8))
+#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8))
+/* Packet split receive type */
+#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \
+ (0x0EA00 + ((_i) * 4)))
+/* array of 4096 1-bit vlan filters */
+#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4))
+/*array of 4096 4-bit vlan vmdq indices */
+#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4))
+#define IXGBE_FCTRL 0x05080
+#define IXGBE_VLNCTRL 0x05088
+#define IXGBE_MCSTCTRL 0x05090
+#define IXGBE_MRQC 0x05818
+#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */
+#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */
+#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */
+#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */
+#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */
+#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */
+#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */
+#define IXGBE_RQTC 0x0EC70
+#define IXGBE_MTQC 0x08120
+#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */
+#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */
+#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4)) /* 64 of these (0-63) */
+#define IXGBE_PFFLPL 0x050B0
+#define IXGBE_PFFLPH 0x050B4
+#define IXGBE_VT_CTL 0x051B0
+#define IXGBE_PFMAILBOX(_i) (0x04B00 + (4 * (_i))) /* 64 total */
+/* 64 Mailboxes, 16 DW each */
+#define IXGBE_PFMBMEM(_i) (0x13000 + (64 * (_i)))
+#define IXGBE_PFMBICR(_i) (0x00710 + (4 * (_i))) /* 4 total */
+#define IXGBE_PFMBIMR(_i) (0x00720 + (4 * (_i))) /* 4 total */
+#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
+#define IXGBE_QDE 0x2F04
+#define IXGBE_VMTXSW(_i) (0x05180 + ((_i) * 4)) /* 2 total */
+#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4))
+#define IXGBE_MRCTL(_i) (0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4))
+#define IXGBE_LVMMC_RX 0x2FA8
+#define IXGBE_LVMMC_TX 0x8108
+#define IXGBE_LMVM_RX 0x2FA4
+#define IXGBE_LMVM_TX 0x8124
+#define IXGBE_WQBR_RX(_i) (0x2FB0 + ((_i) * 4)) /* 4 total */
+#define IXGBE_WQBR_TX(_i) (0x8130 + ((_i) * 4)) /* 4 total */
+#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_RXFECCERR0 0x051B8
+#define IXGBE_LLITHRESH 0x0EC90
+#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_IMIRVP 0x05AC0
+#define IXGBE_VMD_CTL 0x0581C
+#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */
+#define IXGBE_ERETA(_i) (0x0EE80 + ((_i) * 4)) /* 96 of these (0-95) */
+#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */
+
+/* Registers for setting up RSS on X550 with SRIOV
+ * _p - pool number (0..63)
+ * _i - index (0..10 for PFVFRSSRK, 0..15 for PFVFRETA)
+ */
+#define IXGBE_PFVFMRQC(_p) (0x03400 + ((_p) * 4))
+#define IXGBE_PFVFRSSRK(_i, _p) (0x018000 + ((_i) * 4) + ((_p) * 0x40))
+#define IXGBE_PFVFRETA(_i, _p) (0x019000 + ((_i) * 4) + ((_p) * 0x40))
+
+/* Flow Director registers */
+#define IXGBE_FDIRCTRL 0x0EE00
+#define IXGBE_FDIRHKEY 0x0EE68
+#define IXGBE_FDIRSKEY 0x0EE6C
+#define IXGBE_FDIRDIP4M 0x0EE3C
+#define IXGBE_FDIRSIP4M 0x0EE40
+#define IXGBE_FDIRTCPM 0x0EE44
+#define IXGBE_FDIRUDPM 0x0EE48
+#define IXGBE_FDIRSCTPM 0x0EE78
+#define IXGBE_FDIRIP6M 0x0EE74
+#define IXGBE_FDIRM 0x0EE70
+
+/* Flow Director Stats registers */
+#define IXGBE_FDIRFREE 0x0EE38
+#define IXGBE_FDIRLEN 0x0EE4C
+#define IXGBE_FDIRUSTAT 0x0EE50
+#define IXGBE_FDIRFSTAT 0x0EE54
+#define IXGBE_FDIRMATCH 0x0EE58
+#define IXGBE_FDIRMISS 0x0EE5C
+
+/* Flow Director Programming registers */
+#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */
+#define IXGBE_FDIRIPSA 0x0EE18
+#define IXGBE_FDIRIPDA 0x0EE1C
+#define IXGBE_FDIRPORT 0x0EE20
+#define IXGBE_FDIRVLAN 0x0EE24
+#define IXGBE_FDIRHASH 0x0EE28
+#define IXGBE_FDIRCMD 0x0EE2C
+
+/* Transmit DMA registers */
+#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of them (0-31)*/
+#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
+#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40))
+#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40))
+#define IXGBE_TDT(_i) (0x06018 + ((_i) * 0x40))
+#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40))
+#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40))
+#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
+#define IXGBE_DTXCTL 0x07E00
+
+#define IXGBE_DMATXCTL 0x04A80
+#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */
+#define IXGBE_PFDTXGSWC 0x08220
+#define IXGBE_DTXMXSZRQ 0x08100
+#define IXGBE_DTXTCPFLGL 0x04A88
+#define IXGBE_DTXTCPFLGH 0x04A8C
+#define IXGBE_LBDRPEN 0x0CA00
+#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */
+
+#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */
+#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */
+#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */
+#define IXGBE_DMATXCTL_MDP_EN 0x20 /* Bit 5 */
+#define IXGBE_DMATXCTL_MBINTEN 0x40 /* Bit 6 */
+#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */
+
+#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */
+
+/* Anti-spoofing defines */
+#define IXGBE_SPOOF_MACAS_MASK 0xFF
+#define IXGBE_SPOOF_VLANAS_MASK 0xFF00
+#define IXGBE_SPOOF_VLANAS_SHIFT 8
+#define IXGBE_SPOOF_ETHERTYPEAS 0xFF000000
+#define IXGBE_SPOOF_ETHERTYPEAS_SHIFT 16
+#define IXGBE_PFVFSPOOF_REG_COUNT 8
+/* 16 of these (0-15) */
+#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4))
+/* Tx DCA Control register : 128 of these (0-127) */
+#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40))
+#define IXGBE_TIPG 0x0CB00
+#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_MNGTXMAP 0x0CD10
+#define IXGBE_TIPG_FIBER_DEFAULT 3
+#define IXGBE_TXPBSIZE_SHIFT 10
+
+/* Wake up registers */
+#define IXGBE_WUC 0x05800
+#define IXGBE_WUFC 0x05808
+#define IXGBE_WUS 0x05810
+#define IXGBE_IPAV 0x05838
+#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */
+#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */
+
+#define IXGBE_WUPL 0x05900
+#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
+#define IXGBE_PROXYS 0x05F60 /* Proxying Status Register */
+#define IXGBE_PROXYFC 0x05F64 /* Proxying Filter Control Register */
+#define IXGBE_VXLANCTRL 0x0000507C /* Rx filter VXLAN UDPPORT Register */
+
+#define IXGBE_FHFT(_n) (0x09000 + ((_n) * 0x100)) /* Flex host filter table */
+/* Ext Flexible Host Filter Table */
+#define IXGBE_FHFT_EXT(_n) (0x09800 + ((_n) * 0x100))
+#define IXGBE_FHFT_EXT_X550(_n) (0x09600 + ((_n) * 0x100))
+
+/* Four Flexible Filters are supported */
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Six Flexible Filters are supported */
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX_6 6
+/* Eight Flexible Filters are supported */
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX_8 8
+#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128
+#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */
+#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */
+#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define IXGBE_WUC_WKEN 0x00000010 /* Enable PE_WAKE_N pin assertion */
+
+/* Wake Up Filter Control */
+#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */
+
+#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */
+#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
+#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */
+#define IXGBE_WUFC_FLX_FILTERS_6 0x003F0000 /* Mask for 6 flex filters */
+#define IXGBE_WUFC_FLX_FILTERS_8 0x00FF0000 /* Mask for 8 flex filters */
+#define IXGBE_WUFC_FW_RST_WK 0x80000000 /* Ena wake on FW reset assertion */
+/* Mask for Ext. flex filters */
+#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000
+#define IXGBE_WUFC_ALL_FILTERS 0x000F00FF /* Mask all 4 flex filters */
+#define IXGBE_WUFC_ALL_FILTERS_6 0x003F00FF /* Mask all 6 flex filters */
+#define IXGBE_WUFC_ALL_FILTERS_8 0x00FF00FF /* Mask all 8 flex filters */
+#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+
+/* Wake Up Status */
+#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC
+#define IXGBE_WUS_MAG IXGBE_WUFC_MAG
+#define IXGBE_WUS_EX IXGBE_WUFC_EX
+#define IXGBE_WUS_MC IXGBE_WUFC_MC
+#define IXGBE_WUS_BC IXGBE_WUFC_BC
+#define IXGBE_WUS_ARP IXGBE_WUFC_ARP
+#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4
+#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6
+#define IXGBE_WUS_MNG IXGBE_WUFC_MNG
+#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0
+#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1
+#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2
+#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3
+#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4
+#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5
+#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS
+#define IXGBE_WUS_FW_RST_WK IXGBE_WUFC_FW_RST_WK
+/* Proxy Status */
+#define IXGBE_PROXYS_EX 0x00000004 /* Exact packet received */
+#define IXGBE_PROXYS_ARP_DIR 0x00000020 /* ARP w/filter match received */
+#define IXGBE_PROXYS_NS 0x00000200 /* IPV6 NS received */
+#define IXGBE_PROXYS_NS_DIR 0x00000400 /* IPV6 NS w/DA match received */
+#define IXGBE_PROXYS_ARP 0x00000800 /* ARP request packet received */
+#define IXGBE_PROXYS_MLD 0x00001000 /* IPv6 MLD packet received */
+
+/* Proxying Filter Control */
+#define IXGBE_PROXYFC_ENABLE 0x00000001 /* Port Proxying Enable */
+#define IXGBE_PROXYFC_EX 0x00000004 /* Directed Exact Proxy Enable */
+#define IXGBE_PROXYFC_ARP_DIR 0x00000020 /* Directed ARP Proxy Enable */
+#define IXGBE_PROXYFC_NS 0x00000200 /* IPv6 Neighbor Solicitation */
+#define IXGBE_PROXYFC_ARP 0x00000800 /* ARP Request Proxy Enable */
+#define IXGBE_PROXYFC_MLD 0x00000800 /* IPv6 MLD Proxy Enable */
+#define IXGBE_PROXYFC_NO_TCO 0x00008000 /* Ignore TCO packets */
+
+#define IXGBE_WUPL_LENGTH_MASK 0xFFFF
+
+/* DCB registers */
+#define IXGBE_DCB_MAX_TRAFFIC_CLASS 8
+#define IXGBE_RMCS 0x03D00
+#define IXGBE_DPMCS 0x07F40
+#define IXGBE_PDPMCS 0x0CD00
+#define IXGBE_RUPPBMR 0x050A0
+#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCCR(_i) (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCSR(_i) (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+
+/* Power Management */
+/* DMA Coalescing configuration */
+struct ixgbe_dmac_config {
+ u16 watchdog_timer; /* usec units */
+ bool fcoe_en;
+ u32 link_speed;
+ u8 fcoe_tc;
+ u8 num_tcs;
+};
+
+/*
+ * DMA Coalescing threshold Rx PB TC[n] value in Kilobyte by link speed.
+ * DMACRXT = 10Gbps = 10,000 bits / usec = 1250 bytes / usec 70 * 1250 ==
+ * 87500 bytes [85KB]
+ */
+#define IXGBE_DMACRXT_10G 0x55
+#define IXGBE_DMACRXT_1G 0x09
+#define IXGBE_DMACRXT_100M 0x01
+
+/* DMA Coalescing registers */
+#define IXGBE_DMCMNGTH 0x15F20 /* Management Threshold */
+#define IXGBE_DMACR 0x02400 /* Control register */
+#define IXGBE_DMCTH(_i) (0x03300 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_DMCTLX 0x02404 /* Time to Lx request */
+/* DMA Coalescing register fields */
+#define IXGBE_DMCMNGTH_DMCMNGTH_MASK 0x000FFFF0 /* Mng Threshold mask */
+#define IXGBE_DMCMNGTH_DMCMNGTH_SHIFT 4 /* Management Threshold shift */
+#define IXGBE_DMACR_DMACWT_MASK 0x0000FFFF /* Watchdog Timer mask */
+#define IXGBE_DMACR_HIGH_PRI_TC_MASK 0x00FF0000
+#define IXGBE_DMACR_HIGH_PRI_TC_SHIFT 16
+#define IXGBE_DMACR_EN_MNG_IND 0x10000000 /* Enable Mng Indications */
+#define IXGBE_DMACR_LX_COAL_IND 0x40000000 /* Lx Coalescing indicate */
+#define IXGBE_DMACR_DMAC_EN 0x80000000 /* DMA Coalescing Enable */
+#define IXGBE_DMCTH_DMACRXT_MASK 0x000001FF /* Receive Threshold mask */
+#define IXGBE_DMCTLX_TTLX_MASK 0x00000FFF /* Time to Lx request mask */
+
+/* EEE registers */
+#define IXGBE_EEER 0x043A0 /* EEE register */
+#define IXGBE_EEE_STAT 0x04398 /* EEE Status */
+#define IXGBE_EEE_SU 0x04380 /* EEE Set up */
+#define IXGBE_EEE_SU_TEEE_DLY_SHIFT 26
+#define IXGBE_TLPIC 0x041F4 /* EEE Tx LPI count */
+#define IXGBE_RLPIC 0x041F8 /* EEE Rx LPI count */
+
+/* EEE register fields */
+#define IXGBE_EEER_TX_LPI_EN 0x00010000 /* Enable EEE LPI TX path */
+#define IXGBE_EEER_RX_LPI_EN 0x00020000 /* Enable EEE LPI RX path */
+#define IXGBE_EEE_STAT_NEG 0x20000000 /* EEE support neg on link */
+#define IXGBE_EEE_RX_LPI_STATUS 0x40000000 /* RX Link in LPI status */
+#define IXGBE_EEE_TX_LPI_STATUS 0x80000000 /* TX Link in LPI status */
+
+
+
+/* Security Control Registers */
+#define IXGBE_SECTXCTRL 0x08800
+#define IXGBE_SECTXSTAT 0x08804
+#define IXGBE_SECTXBUFFAF 0x08808
+#define IXGBE_SECTXMINIFG 0x08810
+#define IXGBE_SECRXCTRL 0x08D00
+#define IXGBE_SECRXSTAT 0x08D04
+
+/* Security Bit Fields and Masks */
+#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001
+#define IXGBE_SECTXCTRL_TX_DIS 0x00000002
+#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004
+
+#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001
+#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002
+
+#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001
+#define IXGBE_SECRXCTRL_RX_DIS 0x00000002
+
+#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001
+#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002
+
+/* LinkSec (MacSec) Registers */
+#define IXGBE_LSECTXCAP 0x08A00
+#define IXGBE_LSECRXCAP 0x08F00
+#define IXGBE_LSECTXCTRL 0x08A04
+#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */
+#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */
+#define IXGBE_LSECTXSA 0x08A10
+#define IXGBE_LSECTXPN0 0x08A14
+#define IXGBE_LSECTXPN1 0x08A18
+#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECRXCTRL 0x08F04
+#define IXGBE_LSECRXSCL 0x08F08
+#define IXGBE_LSECRXSCH 0x08F0C
+#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m))))
+#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */
+#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */
+#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */
+#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */
+#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */
+#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */
+#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */
+#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */
+#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */
+#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */
+#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */
+#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */
+#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */
+#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */
+#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */
+#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */
+#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */
+#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */
+#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */
+
+/* LinkSec (MacSec) Bit Fields and Masks */
+#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000
+#define IXGBE_LSECTXCAP_SUM_SHIFT 16
+#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000
+#define IXGBE_LSECRXCAP_SUM_SHIFT 16
+
+#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003
+#define IXGBE_LSECTXCTRL_DISABLE 0x0
+#define IXGBE_LSECTXCTRL_AUTH 0x1
+#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2
+#define IXGBE_LSECTXCTRL_AISCI 0x00000020
+#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00
+#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8
+
+#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C
+#define IXGBE_LSECRXCTRL_EN_SHIFT 2
+#define IXGBE_LSECRXCTRL_DISABLE 0x0
+#define IXGBE_LSECRXCTRL_CHECK 0x1
+#define IXGBE_LSECRXCTRL_STRICT 0x2
+#define IXGBE_LSECRXCTRL_DROP 0x3
+#define IXGBE_LSECRXCTRL_PLSH 0x00000040
+#define IXGBE_LSECRXCTRL_RP 0x00000080
+#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33
+
+/* IpSec Registers */
+#define IXGBE_IPSTXIDX 0x08900
+#define IXGBE_IPSTXSALT 0x08904
+#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXIDX 0x08E00
+#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSPI 0x08E14
+#define IXGBE_IPSRXIPIDX 0x08E18
+#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSALT 0x08E2C
+#define IXGBE_IPSRXMOD 0x08E30
+
+#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4
+
+/* DCB registers */
+#define IXGBE_RTRPCS 0x02430
+#define IXGBE_RTTDCS 0x04900
+#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */
+#define IXGBE_RTTPCS 0x0CD00
+#define IXGBE_RTRUP2TC 0x03020
+#define IXGBE_RTTUP2TC 0x0C800
+#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TXLLQ(_i) (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDQSEL 0x04904
+#define IXGBE_RTTDT1C 0x04908
+#define IXGBE_RTTDT1S 0x0490C
+#define IXGBE_RTTDTECC 0x04990
+#define IXGBE_RTTDTECC_NO_BCN 0x00000100
+
+#define IXGBE_RTTBCNRC 0x04984
+#define IXGBE_RTTBCNRC_RS_ENA 0x80000000
+#define IXGBE_RTTBCNRC_RF_DEC_MASK 0x00003FFF
+#define IXGBE_RTTBCNRC_RF_INT_SHIFT 14
+#define IXGBE_RTTBCNRC_RF_INT_MASK \
+ (IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
+#define IXGBE_RTTBCNRM 0x04980
+
+/* BCN (for DCB) Registers */
+#define IXGBE_RTTBCNRS 0x04988
+#define IXGBE_RTTBCNCR 0x08B00
+#define IXGBE_RTTBCNACH 0x08B04
+#define IXGBE_RTTBCNACL 0x08B08
+#define IXGBE_RTTBCNTG 0x04A90
+#define IXGBE_RTTBCNIDX 0x08B0C
+#define IXGBE_RTTBCNCP 0x08B10
+#define IXGBE_RTFRTIMER 0x08B14
+#define IXGBE_RTTBCNRTT 0x05150
+#define IXGBE_RTTBCNRD 0x0498C
+
+
+/* FCoE DMA Context Registers */
+/* FCoE Direct DMA Context */
+#define IXGBE_FCDDC(_i, _j) (0x20000 + ((_i) * 0x4) + ((_j) * 0x10))
+#define IXGBE_FCPTRL 0x02410 /* FC User Desc. PTR Low */
+#define IXGBE_FCPTRH 0x02414 /* FC USer Desc. PTR High */
+#define IXGBE_FCBUFF 0x02418 /* FC Buffer Control */
+#define IXGBE_FCDMARW 0x02420 /* FC Receive DMA RW */
+#define IXGBE_FCBUFF_VALID (1 << 0) /* DMA Context Valid */
+#define IXGBE_FCBUFF_BUFFSIZE (3 << 3) /* User Buffer Size */
+#define IXGBE_FCBUFF_WRCONTX (1 << 7) /* 0: Initiator, 1: Target */
+#define IXGBE_FCBUFF_BUFFCNT 0x0000ff00 /* Number of User Buffers */
+#define IXGBE_FCBUFF_OFFSET 0xffff0000 /* User Buffer Offset */
+#define IXGBE_FCBUFF_BUFFSIZE_SHIFT 3
+#define IXGBE_FCBUFF_BUFFCNT_SHIFT 8
+#define IXGBE_FCBUFF_OFFSET_SHIFT 16
+#define IXGBE_FCDMARW_WE (1 << 14) /* Write enable */
+#define IXGBE_FCDMARW_RE (1 << 15) /* Read enable */
+#define IXGBE_FCDMARW_FCOESEL 0x000001ff /* FC X_ID: 11 bits */
+#define IXGBE_FCDMARW_LASTSIZE 0xffff0000 /* Last User Buffer Size */
+#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16
+/* FCoE SOF/EOF */
+#define IXGBE_TEOFF 0x04A94 /* Tx FC EOF */
+#define IXGBE_TSOFF 0x04A98 /* Tx FC SOF */
+#define IXGBE_REOFF 0x05158 /* Rx FC EOF */
+#define IXGBE_RSOFF 0x051F8 /* Rx FC SOF */
+/* FCoE Filter Context Registers */
+#define IXGBE_FCD_ID 0x05114 /* FCoE D_ID */
+#define IXGBE_FCSMAC 0x0510C /* FCoE Source MAC */
+#define IXGBE_FCFLTRW_SMAC_HIGH_SHIFT 16
+/* FCoE Direct Filter Context */
+#define IXGBE_FCDFC(_i, _j) (0x28000 + ((_i) * 0x4) + ((_j) * 0x10))
+#define IXGBE_FCDFCD(_i) (0x30000 + ((_i) * 0x4))
+#define IXGBE_FCFLT 0x05108 /* FC FLT Context */
+#define IXGBE_FCFLTRW 0x05110 /* FC Filter RW Control */
+#define IXGBE_FCPARAM 0x051d8 /* FC Offset Parameter */
+#define IXGBE_FCFLT_VALID (1 << 0) /* Filter Context Valid */
+#define IXGBE_FCFLT_FIRST (1 << 1) /* Filter First */
+#define IXGBE_FCFLT_SEQID 0x00ff0000 /* Sequence ID */
+#define IXGBE_FCFLT_SEQCNT 0xff000000 /* Sequence Count */
+#define IXGBE_FCFLTRW_RVALDT (1 << 13) /* Fast Re-Validation */
+#define IXGBE_FCFLTRW_WE (1 << 14) /* Write Enable */
+#define IXGBE_FCFLTRW_RE (1 << 15) /* Read Enable */
+/* FCoE Receive Control */
+#define IXGBE_FCRXCTRL 0x05100 /* FC Receive Control */
+#define IXGBE_FCRXCTRL_FCOELLI (1 << 0) /* Low latency interrupt */
+#define IXGBE_FCRXCTRL_SAVBAD (1 << 1) /* Save Bad Frames */
+#define IXGBE_FCRXCTRL_FRSTRDH (1 << 2) /* EN 1st Read Header */
+#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3) /* EN Last Header in Seq */
+#define IXGBE_FCRXCTRL_ALLH (1 << 4) /* EN All Headers */
+#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5) /* EN 1st Seq. Header */
+#define IXGBE_FCRXCTRL_ICRC (1 << 6) /* Ignore Bad FC CRC */
+#define IXGBE_FCRXCTRL_FCCRCBO (1 << 7) /* FC CRC Byte Ordering */
+#define IXGBE_FCRXCTRL_FCOEVER 0x00000f00 /* FCoE Version: 4 bits */
+#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8
+/* FCoE Redirection */
+#define IXGBE_FCRECTL 0x0ED00 /* FC Redirection Control */
+#define IXGBE_FCRETA0 0x0ED10 /* FC Redirection Table 0 */
+#define IXGBE_FCRETA(_i) (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */
+#define IXGBE_FCRECTL_ENA 0x1 /* FCoE Redir Table Enable */
+#define IXGBE_FCRETASEL_ENA 0x2 /* FCoE FCRETASEL bit */
+#define IXGBE_FCRETA_SIZE 8 /* Max entries in FCRETA */
+#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */
+#define IXGBE_FCRETA_SIZE_X550 32 /* Max entries in FCRETA */
+/* Higher 7 bits for the queue index */
+#define IXGBE_FCRETA_ENTRY_HIGH_MASK 0x007F0000
+#define IXGBE_FCRETA_ENTRY_HIGH_SHIFT 16
+
+/* Stats registers */
+#define IXGBE_CRCERRS 0x04000
+#define IXGBE_ILLERRC 0x04004
+#define IXGBE_ERRBC 0x04008
+#define IXGBE_MSPDC 0x04010
+#define IXGBE_MPC(_i) (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/
+#define IXGBE_MLFC 0x04034
+#define IXGBE_MRFC 0x04038
+#define IXGBE_RLEC 0x04040
+#define IXGBE_LXONTXC 0x03F60
+#define IXGBE_LXONRXC 0x0CF60
+#define IXGBE_LXOFFTXC 0x03F68
+#define IXGBE_LXOFFRXC 0x0CF68
+#define IXGBE_LXONRXCNT 0x041A4
+#define IXGBE_LXOFFRXCNT 0x041A8
+#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/
+#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/
+#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/
+#define IXGBE_PXOFFRXC(_i) (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/
+#define IXGBE_PRC64 0x0405C
+#define IXGBE_PRC127 0x04060
+#define IXGBE_PRC255 0x04064
+#define IXGBE_PRC511 0x04068
+#define IXGBE_PRC1023 0x0406C
+#define IXGBE_PRC1522 0x04070
+#define IXGBE_GPRC 0x04074
+#define IXGBE_BPRC 0x04078
+#define IXGBE_MPRC 0x0407C
+#define IXGBE_GPTC 0x04080
+#define IXGBE_GORCL 0x04088
+#define IXGBE_GORCH 0x0408C
+#define IXGBE_GOTCL 0x04090
+#define IXGBE_GOTCH 0x04094
+#define IXGBE_RNBC(_i) (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/
+#define IXGBE_RUC 0x040A4
+#define IXGBE_RFC 0x040A8
+#define IXGBE_ROC 0x040AC
+#define IXGBE_RJC 0x040B0
+#define IXGBE_MNGPRC 0x040B4
+#define IXGBE_MNGPDC 0x040B8
+#define IXGBE_MNGPTC 0x0CF90
+#define IXGBE_TORL 0x040C0
+#define IXGBE_TORH 0x040C4
+#define IXGBE_TPR 0x040D0
+#define IXGBE_TPT 0x040D4
+#define IXGBE_PTC64 0x040D8
+#define IXGBE_PTC127 0x040DC
+#define IXGBE_PTC255 0x040E0
+#define IXGBE_PTC511 0x040E4
+#define IXGBE_PTC1023 0x040E8
+#define IXGBE_PTC1522 0x040EC
+#define IXGBE_MPTC 0x040F0
+#define IXGBE_BPTC 0x040F4
+#define IXGBE_XEC 0x04120
+#define IXGBE_SSVPC 0x08780
+
+#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4))
+#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \
+ (0x08600 + ((_i) * 4)))
+#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4))
+
+#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_L(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_H(_i) (0x01038 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_FCCRC 0x05118 /* Num of Good Eth CRC w/ Bad FC CRC */
+#define IXGBE_FCOERPDC 0x0241C /* FCoE Rx Packets Dropped Count */
+#define IXGBE_FCLAST 0x02424 /* FCoE Last Error Count */
+#define IXGBE_FCOEPRC 0x02428 /* Number of FCoE Packets Received */
+#define IXGBE_FCOEDWRC 0x0242C /* Number of FCoE DWords Received */
+#define IXGBE_FCOEPTC 0x08784 /* Number of FCoE Packets Transmitted */
+#define IXGBE_FCOEDWTC 0x08788 /* Number of FCoE DWords Transmitted */
+#define IXGBE_FCCRC_CNT_MASK 0x0000FFFF /* CRC_CNT: bit 0 - 15 */
+#define IXGBE_FCLAST_CNT_MASK 0x0000FFFF /* Last_CNT: bit 0 - 15 */
+#define IXGBE_O2BGPTC 0x041C4
+#define IXGBE_O2BSPC 0x087B0
+#define IXGBE_B2OSPC 0x041C0
+#define IXGBE_B2OGPRC 0x02F90
+#define IXGBE_BUPRC 0x04180
+#define IXGBE_BMPRC 0x04184
+#define IXGBE_BBPRC 0x04188
+#define IXGBE_BUPTC 0x0418C
+#define IXGBE_BMPTC 0x04190
+#define IXGBE_BBPTC 0x04194
+#define IXGBE_BCRCERRS 0x04198
+#define IXGBE_BXONRXC 0x0419C
+#define IXGBE_BXOFFRXC 0x041E0
+#define IXGBE_BXONTXC 0x041E4
+#define IXGBE_BXOFFTXC 0x041E8
+
+/* Management */
+#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MANC 0x05820
+#define IXGBE_MFVAL 0x05824
+#define IXGBE_MANC2H 0x05860
+#define IXGBE_MDEF(_i) (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MIPAF 0x058B0
+#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */
+#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_LSWFW 0x15014
+#define IXGBE_BMCIP(_i) (0x05050 + ((_i) * 4)) /* 0x5050-0x505C */
+#define IXGBE_BMCIPVAL 0x05060
+#define IXGBE_BMCIP_IPADDR_TYPE 0x00000001
+#define IXGBE_BMCIP_IPADDR_VALID 0x00000002
+
+/* Management Bit Fields and Masks */
+#define IXGBE_MANC_MPROXYE 0x40000000 /* Management Proxy Enable */
+#define IXGBE_MANC_RCV_TCO_EN 0x00020000 /* Rcv TCO packet enable */
+#define IXGBE_MANC_EN_BMC2OS 0x10000000 /* Ena BMC2OS and OS2BMC traffic */
+#define IXGBE_MANC_EN_BMC2OS_SHIFT 28
+
+/* Firmware Semaphore Register */
+#define IXGBE_FWSM_MODE_MASK 0xE
+#define IXGBE_FWSM_TS_ENABLED 0x1
+#define IXGBE_FWSM_FW_MODE_PT 0x4
+
+/* ARC Subsystem registers */
+#define IXGBE_HICR 0x15F00
+#define IXGBE_FWSTS 0x15F0C
+#define IXGBE_HSMC0R 0x15F04
+#define IXGBE_HSMC1R 0x15F08
+#define IXGBE_SWSR 0x15F10
+#define IXGBE_HFDR 0x15FE8
+#define IXGBE_FLEX_MNG 0x15800 /* 0x15800 - 0x15EFC */
+
+#define IXGBE_HICR_EN 0x01 /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define IXGBE_HICR_C 0x02
+#define IXGBE_HICR_SV 0x04 /* Status Validity */
+#define IXGBE_HICR_FW_RESET_ENABLE 0x40
+#define IXGBE_HICR_FW_RESET 0x80
+
+/* PCI-E registers */
+#define IXGBE_GCR 0x11000
+#define IXGBE_GTV 0x11004
+#define IXGBE_FUNCTAG 0x11008
+#define IXGBE_GLT 0x1100C
+#define IXGBE_PCIEPIPEADR 0x11004
+#define IXGBE_PCIEPIPEDAT 0x11008
+#define IXGBE_GSCL_1 0x11010
+#define IXGBE_GSCL_2 0x11014
+#define IXGBE_GSCL_3 0x11018
+#define IXGBE_GSCL_4 0x1101C
+#define IXGBE_GSCN_0 0x11020
+#define IXGBE_GSCN_1 0x11024
+#define IXGBE_GSCN_2 0x11028
+#define IXGBE_GSCN_3 0x1102C
+#define IXGBE_FACTPS 0x10150
+#define IXGBE_FACTPS_X540 IXGBE_FACTPS
+#define IXGBE_FACTPS_X550 IXGBE_FACTPS
+#define IXGBE_FACTPS_X550EM_x IXGBE_FACTPS
+#define IXGBE_FACTPS_BY_MAC(_hw) IXGBE_FACTPS
+
+#define IXGBE_PCIEANACTL 0x11040
+#define IXGBE_SWSM 0x10140
+#define IXGBE_SWSM_X540 IXGBE_SWSM
+#define IXGBE_SWSM_X550 IXGBE_SWSM
+#define IXGBE_SWSM_X550EM_x IXGBE_SWSM
+#define IXGBE_SWSM_BY_MAC(_hw) IXGBE_SWSM
+
+#define IXGBE_FWSM 0x10148
+#define IXGBE_FWSM_X540 IXGBE_FWSM
+#define IXGBE_FWSM_X550 IXGBE_FWSM
+#define IXGBE_FWSM_X550EM_x IXGBE_FWSM
+#define IXGBE_FWSM_BY_MAC(_hw) IXGBE_FWSM
+
+#define IXGBE_SWFW_SYNC IXGBE_GSSR
+#define IXGBE_SWFW_SYNC_X540 IXGBE_SWFW_SYNC
+#define IXGBE_SWFW_SYNC_X550 IXGBE_SWFW_SYNC
+#define IXGBE_SWFW_SYNC_X550EM_x IXGBE_SWFW_SYNC
+#define IXGBE_SWFW_SYNC_BY_MAC(_hw) IXGBE_SWFW_SYNC
+
+#define IXGBE_GSSR 0x10160
+#define IXGBE_MREVID 0x11064
+#define IXGBE_DCA_ID 0x11070
+#define IXGBE_DCA_CTRL 0x11074
+
+/* PCI-E registers 82599-Specific */
+#define IXGBE_GCR_EXT 0x11050
+#define IXGBE_GSCL_5_82599 0x11030
+#define IXGBE_GSCL_6_82599 0x11034
+#define IXGBE_GSCL_7_82599 0x11038
+#define IXGBE_GSCL_8_82599 0x1103C
+#define IXGBE_PHYADR_82599 0x11040
+#define IXGBE_PHYDAT_82599 0x11044
+#define IXGBE_PHYCTL_82599 0x11048
+#define IXGBE_PBACLR_82599 0x11068
+#define IXGBE_CIAA 0x11088
+#define IXGBE_CIAD 0x1108C
+#define IXGBE_CIAA_82599 IXGBE_CIAA
+#define IXGBE_CIAD_82599 IXGBE_CIAD
+#define IXGBE_CIAA_X540 IXGBE_CIAA
+#define IXGBE_CIAD_X540 IXGBE_CIAD
+#define IXGBE_CIAA_X550 0x11508
+#define IXGBE_CIAD_X550 0x11510
+#define IXGBE_CIAA_X550EM_x IXGBE_CIAA_X550
+#define IXGBE_CIAD_X550EM_x IXGBE_CIAD_X550
+#define IXGBE_CIAA_BY_MAC(_hw) IXGBE_BY_MAC((_hw), CIAA)
+#define IXGBE_CIAD_BY_MAC(_hw) IXGBE_BY_MAC((_hw), CIAD)
+#define IXGBE_PICAUSE 0x110B0
+#define IXGBE_PIENA 0x110B8
+#define IXGBE_CDQ_MBR_82599 0x110B4
+#define IXGBE_PCIESPARE 0x110BC
+#define IXGBE_MISC_REG_82599 0x110F0
+#define IXGBE_ECC_CTRL_0_82599 0x11100
+#define IXGBE_ECC_CTRL_1_82599 0x11104
+#define IXGBE_ECC_STATUS_82599 0x110E0
+#define IXGBE_BAR_CTRL_82599 0x110F4
+
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define IXGBE_GCR_CAP_VER2 0x00040000
+
+#define IXGBE_GCR_EXT_MSIX_EN 0x80000000
+#define IXGBE_GCR_EXT_BUFFERS_CLEAR 0x40000000
+#define IXGBE_GCR_EXT_VT_MODE_16 0x00000001
+#define IXGBE_GCR_EXT_VT_MODE_32 0x00000002
+#define IXGBE_GCR_EXT_VT_MODE_64 0x00000003
+#define IXGBE_GCR_EXT_SRIOV (IXGBE_GCR_EXT_MSIX_EN | \
+ IXGBE_GCR_EXT_VT_MODE_64)
+#define IXGBE_GCR_EXT_VT_MODE_MASK 0x00000003
+/* Time Sync Registers */
+#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
+#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
+#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */
+#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */
+#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */
+#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */
+#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */
+#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */
+#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */
+#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */
+#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */
+#define IXGBE_SYSTIMR 0x08C58 /* System time register Residue - RO */
+#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */
+#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */
+#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */
+#define IXGBE_TSAUXC 0x08C20 /* TimeSync Auxiliary Control register - RW */
+#define IXGBE_TRGTTIML0 0x08C24 /* Target Time Register 0 Low - RW */
+#define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */
+#define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */
+#define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */
+#define IXGBE_CLKTIML 0x08C34 /* Clock Out Time Register Low - RW */
+#define IXGBE_CLKTIMH 0x08C38 /* Clock Out Time Register High - RW */
+#define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */
+#define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */
+#define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
+#define IXGBE_AUXSTMPH0 0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
+#define IXGBE_AUXSTMPL1 0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
+#define IXGBE_AUXSTMPH1 0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
+#define IXGBE_TSIM 0x08C68 /* TimeSync Interrupt Mask Register - RW */
+#define IXGBE_TSICR 0x08C60 /* TimeSync Interrupt Cause Register - WO */
+#define IXGBE_TSSDP 0x0003C /* TimeSync SDP Configuration Register - RW */
+
+/* Diagnostic Registers */
+#define IXGBE_RDSTATCTL 0x02C20
+#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
+#define IXGBE_RDHMPN 0x02F08
+#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4))
+#define IXGBE_RDPROBE 0x02F20
+#define IXGBE_RDMAM 0x02F30
+#define IXGBE_RDMAD 0x02F34
+#define IXGBE_TDHMPN 0x07F08
+#define IXGBE_TDHMPN2 0x082FC
+#define IXGBE_TXDESCIC 0x082CC
+#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4))
+#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4))
+#define IXGBE_TDPROBE 0x07F20
+#define IXGBE_TXBUFCTRL 0x0C600
+#define IXGBE_TXBUFDATA0 0x0C610
+#define IXGBE_TXBUFDATA1 0x0C614
+#define IXGBE_TXBUFDATA2 0x0C618
+#define IXGBE_TXBUFDATA3 0x0C61C
+#define IXGBE_RXBUFCTRL 0x03600
+#define IXGBE_RXBUFDATA0 0x03610
+#define IXGBE_RXBUFDATA1 0x03614
+#define IXGBE_RXBUFDATA2 0x03618
+#define IXGBE_RXBUFDATA3 0x0361C
+#define IXGBE_PCIE_DIAG(_i) (0x11090 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_RFVAL 0x050A4
+#define IXGBE_MDFTC1 0x042B8
+#define IXGBE_MDFTC2 0x042C0
+#define IXGBE_MDFTFIFO1 0x042C4
+#define IXGBE_MDFTFIFO2 0x042C8
+#define IXGBE_MDFTS 0x042CC
+#define IXGBE_RXDATAWRPTR(_i) (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/
+#define IXGBE_RXDESCWRPTR(_i) (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/
+#define IXGBE_RXDATARDPTR(_i) (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/
+#define IXGBE_RXDESCRDPTR(_i) (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/
+#define IXGBE_TXDATAWRPTR(_i) (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/
+#define IXGBE_TXDESCWRPTR(_i) (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/
+#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
+#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
+#define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_RXWRPTR(_i) (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
+#define IXGBE_RXUSED(_i) (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
+#define IXGBE_RXRDPTR(_i) (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
+#define IXGBE_RXRDWRPTR(_i) (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
+#define IXGBE_TXWRPTR(_i) (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
+#define IXGBE_TXUSED(_i) (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
+#define IXGBE_TXRDPTR(_i) (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
+#define IXGBE_TXRDWRPTR(_i) (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
+#define IXGBE_PCIEECCCTL0 0x11100
+#define IXGBE_PCIEECCCTL1 0x11104
+#define IXGBE_RXDBUECC 0x03F70
+#define IXGBE_TXDBUECC 0x0CF70
+#define IXGBE_RXDBUEST 0x03F74
+#define IXGBE_TXDBUEST 0x0CF74
+#define IXGBE_PBTXECC 0x0C300
+#define IXGBE_PBRXECC 0x03300
+#define IXGBE_GHECCR 0x110B0
+
+/* MAC Registers */
+#define IXGBE_PCS1GCFIG 0x04200
+#define IXGBE_PCS1GLCTL 0x04208
+#define IXGBE_PCS1GLSTA 0x0420C
+#define IXGBE_PCS1GDBG0 0x04210
+#define IXGBE_PCS1GDBG1 0x04214
+#define IXGBE_PCS1GANA 0x04218
+#define IXGBE_PCS1GANLP 0x0421C
+#define IXGBE_PCS1GANNP 0x04220
+#define IXGBE_PCS1GANLPNP 0x04224
+#define IXGBE_HLREG0 0x04240
+#define IXGBE_HLREG1 0x04244
+#define IXGBE_PAP 0x04248
+#define IXGBE_MACA 0x0424C
+#define IXGBE_APAE 0x04250
+#define IXGBE_ARD 0x04254
+#define IXGBE_AIS 0x04258
+#define IXGBE_MSCA 0x0425C
+#define IXGBE_MSRWD 0x04260
+#define IXGBE_MLADD 0x04264
+#define IXGBE_MHADD 0x04268
+#define IXGBE_MAXFRS 0x04268
+#define IXGBE_TREG 0x0426C
+#define IXGBE_PCSS1 0x04288
+#define IXGBE_PCSS2 0x0428C
+#define IXGBE_XPCSS 0x04290
+#define IXGBE_MFLCN 0x04294
+#define IXGBE_SERDESC 0x04298
+#define IXGBE_MACS 0x0429C
+#define IXGBE_AUTOC 0x042A0
+#define IXGBE_LINKS 0x042A4
+#define IXGBE_LINKS2 0x04324
+#define IXGBE_AUTOC2 0x042A8
+#define IXGBE_AUTOC3 0x042AC
+#define IXGBE_ANLP1 0x042B0
+#define IXGBE_ANLP2 0x042B4
+#define IXGBE_MACC 0x04330
+#define IXGBE_ATLASCTL 0x04800
+#define IXGBE_MMNGC 0x042D0
+#define IXGBE_ANLPNP1 0x042D4
+#define IXGBE_ANLPNP2 0x042D8
+#define IXGBE_KRPCSFC 0x042E0
+#define IXGBE_KRPCSS 0x042E4
+#define IXGBE_FECS1 0x042E8
+#define IXGBE_FECS2 0x042EC
+#define IXGBE_SMADARCTL 0x14F10
+#define IXGBE_MPVC 0x04318
+#define IXGBE_SGMIIC 0x04314
+
+/* Statistics Registers */
+#define IXGBE_RXNFGPC 0x041B0
+#define IXGBE_RXNFGBCL 0x041B4
+#define IXGBE_RXNFGBCH 0x041B8
+#define IXGBE_RXDGPC 0x02F50
+#define IXGBE_RXDGBCL 0x02F54
+#define IXGBE_RXDGBCH 0x02F58
+#define IXGBE_RXDDGPC 0x02F5C
+#define IXGBE_RXDDGBCL 0x02F60
+#define IXGBE_RXDDGBCH 0x02F64
+#define IXGBE_RXLPBKGPC 0x02F68
+#define IXGBE_RXLPBKGBCL 0x02F6C
+#define IXGBE_RXLPBKGBCH 0x02F70
+#define IXGBE_RXDLPBKGPC 0x02F74
+#define IXGBE_RXDLPBKGBCL 0x02F78
+#define IXGBE_RXDLPBKGBCH 0x02F7C
+#define IXGBE_TXDGPC 0x087A0
+#define IXGBE_TXDGBCL 0x087A4
+#define IXGBE_TXDGBCH 0x087A8
+
+#define IXGBE_RXDSTATCTRL 0x02F40
+
+/* Copper Pond 2 link timeout */
+#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
+
+/* Omer CORECTL */
+#define IXGBE_CORECTL 0x014F00
+/* BARCTRL */
+#define IXGBE_BARCTRL 0x110F4
+#define IXGBE_BARCTRL_FLSIZE 0x0700
+#define IXGBE_BARCTRL_FLSIZE_SHIFT 8
+#define IXGBE_BARCTRL_CSRSIZE 0x2000
+
+/* RSCCTL Bit Masks */
+#define IXGBE_RSCCTL_RSCEN 0x01
+#define IXGBE_RSCCTL_MAXDESC_1 0x00
+#define IXGBE_RSCCTL_MAXDESC_4 0x04
+#define IXGBE_RSCCTL_MAXDESC_8 0x08
+#define IXGBE_RSCCTL_MAXDESC_16 0x0C
+#define IXGBE_RSCCTL_TS_DIS 0x02
+
+/* RSCDBU Bit Masks */
+#define IXGBE_RSCDBU_RSCSMALDIS_MASK 0x0000007F
+#define IXGBE_RSCDBU_RSCACKDIS 0x00000080
+
+/* RDRXCTL Bit Masks */
+#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min THLD Size */
+#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */
+#define IXGBE_RDRXCTL_PSP 0x00000004 /* Pad Small Packet */
+#define IXGBE_RDRXCTL_MVMEN 0x00000020
+#define IXGBE_RDRXCTL_RSC_PUSH_DIS 0x00000020
+#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */
+#define IXGBE_RDRXCTL_RSC_PUSH 0x00000080
+#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */
+#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000 /* RSC First packet size */
+#define IXGBE_RDRXCTL_RSCLLIDIS 0x00800000 /* Disable RSC compl on LLI*/
+#define IXGBE_RDRXCTL_RSCACKC 0x02000000 /* must set 1 when RSC ena */
+#define IXGBE_RDRXCTL_FCOE_WRFIX 0x04000000 /* must set 1 when RSC ena */
+#define IXGBE_RDRXCTL_MBINTEN 0x10000000
+#define IXGBE_RDRXCTL_MDP_EN 0x20000000
+
+/* RQTC Bit Masks and Shifts */
+#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4)
+#define IXGBE_RQTC_TC0_MASK (0x7 << 0)
+#define IXGBE_RQTC_TC1_MASK (0x7 << 4)
+#define IXGBE_RQTC_TC2_MASK (0x7 << 8)
+#define IXGBE_RQTC_TC3_MASK (0x7 << 12)
+#define IXGBE_RQTC_TC4_MASK (0x7 << 16)
+#define IXGBE_RQTC_TC5_MASK (0x7 << 20)
+#define IXGBE_RQTC_TC6_MASK (0x7 << 24)
+#define IXGBE_RQTC_TC7_MASK (0x7 << 28)
+
+/* PSRTYPE.RQPL Bit masks and shift */
+#define IXGBE_PSRTYPE_RQPL_MASK 0x7
+#define IXGBE_PSRTYPE_RQPL_SHIFT 29
+
+/* CTRL Bit Masks */
+#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */
+#define IXGBE_CTRL_LNK_RST 0x00000008 /* Link Reset. Resets everything. */
+#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */
+#define IXGBE_CTRL_RST_MASK (IXGBE_CTRL_LNK_RST | IXGBE_CTRL_RST)
+
+/* FACTPS */
+#define IXGBE_FACTPS_MNGCG 0x20000000 /* Manageblility Clock Gated */
+#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */
+
+/* MHADD Bit Masks */
+#define IXGBE_MHADD_MFS_MASK 0xFFFF0000
+#define IXGBE_MHADD_MFS_SHIFT 16
+
+/* Extended Device Control */
+#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */
+#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */
+#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+
+/* Direct Cache Access (DCA) definitions */
+#define IXGBE_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */
+#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */
+
+#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */
+#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
+
+#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */
+#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* Rx Desc enable */
+#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* Rx Desc header ena */
+#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* Rx Desc payload ena */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DATA_WRO_EN (1 << 13) /* Rx wr data Relax Order */
+#define IXGBE_DCA_RXCTRL_HEAD_WRO_EN (1 << 15) /* Rx wr header RO */
+
+#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */
+#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define IXGBE_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */
+#define IXGBE_DCA_TXCTRL_DESC_WRO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define IXGBE_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */
+#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */
+
+/* MSCA Bit Masks */
+#define IXGBE_MSCA_NP_ADDR_MASK 0x0000FFFF /* MDI Addr (new prot) */
+#define IXGBE_MSCA_NP_ADDR_SHIFT 0
+#define IXGBE_MSCA_DEV_TYPE_MASK 0x001F0000 /* Dev Type (new prot) */
+#define IXGBE_MSCA_DEV_TYPE_SHIFT 16 /* Register Address (old prot */
+#define IXGBE_MSCA_PHY_ADDR_MASK 0x03E00000 /* PHY Address mask */
+#define IXGBE_MSCA_PHY_ADDR_SHIFT 21 /* PHY Address shift*/
+#define IXGBE_MSCA_OP_CODE_MASK 0x0C000000 /* OP CODE mask */
+#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */
+#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */
+#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (wr) */
+#define IXGBE_MSCA_READ 0x0C000000 /* OP CODE 11 (rd) */
+#define IXGBE_MSCA_READ_AUTOINC 0x08000000 /* OP CODE 10 (rd auto inc)*/
+#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */
+#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */
+#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new prot) */
+#define IXGBE_MSCA_OLD_PROTOCOL 0x10000000 /* ST CODE 01 (old prot) */
+#define IXGBE_MSCA_MDI_COMMAND 0x40000000 /* Initiate MDI command */
+#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress ena */
+
+/* MSRWD bit masks */
+#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF
+#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0
+#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000
+#define IXGBE_MSRWD_READ_DATA_SHIFT 16
+
+/* Atlas registers */
+#define IXGBE_ATLAS_PDN_LPBK 0x24
+#define IXGBE_ATLAS_PDN_10G 0xB
+#define IXGBE_ATLAS_PDN_1G 0xC
+#define IXGBE_ATLAS_PDN_AN 0xD
+
+/* Atlas bit masks */
+#define IXGBE_ATLASCTL_WRITE_CMD 0x00010000
+#define IXGBE_ATLAS_PDN_TX_REG_EN 0x10
+#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL 0xF0
+#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0
+#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0
+
+/* Omer bit masks */
+#define IXGBE_CORECTL_WRITE_CMD 0x00010000
+
+/* Device Type definitions for new protocol MDIO commands */
+#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1
+#define IXGBE_MDIO_PCS_DEV_TYPE 0x3
+#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4
+#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */
+#define IXGBE_TWINAX_DEV 1
+
+#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
+
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Ctrl Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0-10G, 1-1G */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010
+
+#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */
+#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT 0xC800 /* AUTO_NEG Vendor Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM 0xCC00 /* AUTO_NEG Vendor TX Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */
+#define IXGBE_MDIO_AUTO_NEG_VEN_LSC 0x1 /* AUTO_NEG Vendor Tx LSC */
+#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */
+#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT 0x3C /* AUTO_NEG EEE Advt Reg */
+#define IXGBE_AUTO_NEG_10GBASE_EEE_ADVT 0x8 /* AUTO NEG EEE 10GBaseT Advt */
+#define IXGBE_AUTO_NEG_1000BASE_EEE_ADVT 0x4 /* AUTO NEG EEE 1000BaseT Advt */
+#define IXGBE_AUTO_NEG_100BASE_EEE_ADVT 0x2 /* AUTO NEG EEE 100BaseT Advt */
+#define IXGBE_MDIO_PHY_XS_CONTROL 0x0 /* PHY_XS Control Reg */
+#define IXGBE_MDIO_PHY_XS_RESET 0x8000 /* PHY_XS Reset */
+#define IXGBE_MDIO_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/
+#define IXGBE_MDIO_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/
+#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Ability Reg */
+#define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */
+#define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */
+#define IXGBE_MDIO_PHY_SPEED_100M 0x0020 /* 100M capable */
+#define IXGBE_MDIO_PHY_EXT_ABILITY 0xB /* Ext Ability Reg */
+#define IXGBE_MDIO_PHY_10GBASET_ABILITY 0x0004 /* 10GBaseT capable */
+#define IXGBE_MDIO_PHY_1000BASET_ABILITY 0x0020 /* 1000BaseT capable */
+#define IXGBE_MDIO_PHY_100BASETX_ABILITY 0x0080 /* 100BaseTX capable */
+#define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE 0x0800 /* Set low power mode */
+#define IXGBE_AUTO_NEG_LP_STATUS 0xE820 /* AUTO NEG Rx LP Status Reg */
+#define IXGBE_AUTO_NEG_LP_1000BASE_CAP 0x8000 /* AUTO NEG Rx LP 1000BaseT Cap */
+#define IXGBE_AUTO_NEG_LP_10GBASE_CAP 0x0800 /* AUTO NEG Rx LP 10GBaseT Cap */
+#define IXGBE_AUTO_NEG_10GBASET_STAT 0x0021 /* AUTO NEG 10G BaseT Stat */
+
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3 0xCC02 /* Vendor Alarms 3 Reg */
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK 0x3 /* PHY Reset Complete Mask */
+#define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */
+#define IXGBE_MDIO_POWER_UP_STALL 0x8000 /* Power Up Stall */
+#define IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK 0xFF00 /* int std mask */
+#define IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG 0xFC00 /* chip std int flag */
+#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK 0xFF01 /* int chip-wide mask */
+#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG 0xFC01 /* int chip-wide mask */
+#define IXGBE_MDIO_GLOBAL_ALARM_1 0xCC00 /* Global alarm 1 */
+#define IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL 0x4000 /* high temp failure */
+#define IXGBE_MDIO_GLOBAL_INT_MASK 0xD400 /* Global int mask */
+#define IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN 0x1000 /* autoneg vendor alarm int enable */
+#define IXGBE_MDIO_GLOBAL_ALARM_1_INT 0x4 /* int in Global alarm 1 */
+#define IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN 0x1 /* vendor alarm int enable */
+#define IXGBE_MDIO_GLOBAL_STD_ALM2_INT 0x200 /* vendor alarm2 int mask */
+#define IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN 0x4000 /* int high temp enable */
+#define IXGBE_MDIO_PMA_PMD_CONTROL_ADDR 0x0000 /* PMA/PMD Control Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */
+#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK 0xD401 /* PHY TX Vendor LASI */
+#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN 0x1 /* PHY TX Vendor LASI enable */
+#define IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR 0x9 /* Standard Transmit Dis Reg */
+#define IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE 0x0001 /* PMD Global Transmit Dis */
+
+#define IXGBE_PCRC8ECL 0x0E810 /* PCR CRC-8 Error Count Lo */
+#define IXGBE_PCRC8ECH 0x0E811 /* PCR CRC-8 Error Count Hi */
+#define IXGBE_PCRC8ECH_MASK 0x1F
+#define IXGBE_LDPCECL 0x0E820 /* PCR Uncorrected Error Count Lo */
+#define IXGBE_LDPCECH 0x0E821 /* PCR Uncorrected Error Count Hi */
+
+/* MII clause 22/28 definitions */
+#define IXGBE_MDIO_PHY_LOW_POWER_MODE 0x0800
+
+#define IXGBE_MDIO_XENPAK_LASI_STATUS 0x9005 /* XENPAK LASI Status register*/
+#define IXGBE_XENPAK_LASI_LINK_STATUS_ALARM 0x1 /* Link Status Alarm change */
+
+#define IXGBE_MDIO_AUTO_NEG_LINK_STATUS 0x4 /* Indicates if link is up */
+
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK 0x7 /* Speed/Duplex Mask */
+#define IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK 0x6 /* Speed Mask */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_HALF 0x0 /* 10Mb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_FULL 0x1 /* 10Mb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_HALF 0x2 /* 100Mb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_FULL 0x3 /* 100Mb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_HALF 0x4 /* 1Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL 0x5 /* 1Gb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_HALF 0x6 /* 10Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL 0x7 /* 10Gb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB 0x4 /* 1Gb/s */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB 0x6 /* 10Gb/s */
+
+#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG 0x20 /* 10G Control Reg */
+#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
+#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */
+#define IXGBE_MII_AUTONEG_ADVERTISE_REG 0x10 /* 100M Advertisement */
+#define IXGBE_MII_10GBASE_T_ADVERTISE 0x1000 /* full duplex, bit:12*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/
+#define IXGBE_MII_2_5GBASE_T_ADVERTISE 0x0400
+#define IXGBE_MII_5GBASE_T_ADVERTISE 0x0800
+#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */
+#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */
+#define IXGBE_MII_RESTART 0x200
+#define IXGBE_MII_AUTONEG_COMPLETE 0x20
+#define IXGBE_MII_AUTONEG_LINK_UP 0x04
+#define IXGBE_MII_AUTONEG_REG 0x0
+
+#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0
+#define IXGBE_MAX_PHY_ADDR 32
+
+/* PHY IDs*/
+#define TN1010_PHY_ID 0x00A19410
+#define TNX_FW_REV 0xB
+#define X540_PHY_ID 0x01540200
+#define X550_PHY_ID1 0x01540220
+#define X550_PHY_ID2 0x01540223
+#define X550_PHY_ID3 0x01540221
+#define X557_PHY_ID 0x01540240
+#define AQ_FW_REV 0x20
+#define QT2022_PHY_ID 0x0043A400
+#define ATH_PHY_ID 0x03429050
+
+/* PHY Types */
+#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0
+
+/* Special PHY Init Routine */
+#define IXGBE_PHY_INIT_OFFSET_NL 0x002B
+#define IXGBE_PHY_INIT_END_NL 0xFFFF
+#define IXGBE_CONTROL_MASK_NL 0xF000
+#define IXGBE_DATA_MASK_NL 0x0FFF
+#define IXGBE_CONTROL_SHIFT_NL 12
+#define IXGBE_DELAY_NL 0
+#define IXGBE_DATA_NL 1
+#define IXGBE_CONTROL_NL 0x000F
+#define IXGBE_CONTROL_EOL_NL 0x0FFF
+#define IXGBE_CONTROL_SOL_NL 0x0000
+
+/* General purpose Interrupt Enable */
+#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */
+#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */
+#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */
+#define IXGBE_SDP0_GPIEN_X540 0x00000002 /* SDP0 on X540 and X550 */
+#define IXGBE_SDP1_GPIEN_X540 0x00000004 /* SDP1 on X540 and X550 */
+#define IXGBE_SDP2_GPIEN_X540 0x00000008 /* SDP2 on X540 and X550 */
+#define IXGBE_SDP0_GPIEN_X550 IXGBE_SDP0_GPIEN_X540
+#define IXGBE_SDP1_GPIEN_X550 IXGBE_SDP1_GPIEN_X540
+#define IXGBE_SDP2_GPIEN_X550 IXGBE_SDP2_GPIEN_X540
+#define IXGBE_SDP0_GPIEN_X550EM_x IXGBE_SDP0_GPIEN_X540
+#define IXGBE_SDP1_GPIEN_X550EM_x IXGBE_SDP1_GPIEN_X540
+#define IXGBE_SDP2_GPIEN_X550EM_x IXGBE_SDP2_GPIEN_X540
+#define IXGBE_SDP0_GPIEN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), SDP0_GPIEN)
+#define IXGBE_SDP1_GPIEN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), SDP1_GPIEN)
+#define IXGBE_SDP2_GPIEN_BY_MAC(_hw) IXGBE_BY_MAC((_hw), SDP2_GPIEN)
+
+#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */
+#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */
+#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */
+#define IXGBE_GPIE_EIAME 0x40000000
+#define IXGBE_GPIE_PBA_SUPPORT 0x80000000
+#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
+#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */
+#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */
+#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */
+#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */
+
+/* Packet Buffer Initialization */
+#define IXGBE_MAX_PACKET_BUFFERS 8
+
+#define IXGBE_TXPBSIZE_20KB 0x00005000 /* 20KB Packet Buffer */
+#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */
+#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */
+#define IXGBE_RXPBSIZE_MAX 0x00080000 /* 512KB Packet Buffer */
+#define IXGBE_TXPBSIZE_MAX 0x00028000 /* 160KB Packet Buffer */
+
+#define IXGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */
+#define IXGBE_MAX_PB 8
+
+/* Packet buffer allocation strategies */
+enum {
+ PBA_STRATEGY_EQUAL = 0, /* Distribute PB space equally */
+#define PBA_STRATEGY_EQUAL PBA_STRATEGY_EQUAL
+ PBA_STRATEGY_WEIGHTED = 1, /* Weight front half of TCs */
+#define PBA_STRATEGY_WEIGHTED PBA_STRATEGY_WEIGHTED
+};
+
+/* Transmit Flow Control status */
+#define IXGBE_TFCS_TXOFF 0x00000001
+#define IXGBE_TFCS_TXOFF0 0x00000100
+#define IXGBE_TFCS_TXOFF1 0x00000200
+#define IXGBE_TFCS_TXOFF2 0x00000400
+#define IXGBE_TFCS_TXOFF3 0x00000800
+#define IXGBE_TFCS_TXOFF4 0x00001000
+#define IXGBE_TFCS_TXOFF5 0x00002000
+#define IXGBE_TFCS_TXOFF6 0x00004000
+#define IXGBE_TFCS_TXOFF7 0x00008000
+
+/* TCP Timer */
+#define IXGBE_TCPTIMER_KS 0x00000100
+#define IXGBE_TCPTIMER_COUNT_ENABLE 0x00000200
+#define IXGBE_TCPTIMER_COUNT_FINISH 0x00000400
+#define IXGBE_TCPTIMER_LOOP 0x00000800
+#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF
+
+/* HLREG0 Bit Masks */
+#define IXGBE_HLREG0_TXCRCEN 0x00000001 /* bit 0 */
+#define IXGBE_HLREG0_RXCRCSTRP 0x00000002 /* bit 1 */
+#define IXGBE_HLREG0_JUMBOEN 0x00000004 /* bit 2 */
+#define IXGBE_HLREG0_TXPADEN 0x00000400 /* bit 10 */
+#define IXGBE_HLREG0_TXPAUSEEN 0x00001000 /* bit 12 */
+#define IXGBE_HLREG0_RXPAUSEEN 0x00004000 /* bit 14 */
+#define IXGBE_HLREG0_LPBK 0x00008000 /* bit 15 */
+#define IXGBE_HLREG0_MDCSPD 0x00010000 /* bit 16 */
+#define IXGBE_HLREG0_CONTMDC 0x00020000 /* bit 17 */
+#define IXGBE_HLREG0_CTRLFLTR 0x00040000 /* bit 18 */
+#define IXGBE_HLREG0_PREPEND 0x00F00000 /* bits 20-23 */
+#define IXGBE_HLREG0_PRIPAUSEEN 0x01000000 /* bit 24 */
+#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000 /* bits 25-26 */
+#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000 /* bit 27 */
+#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000 /* bit 28 */
+
+/* VMD_CTL bitmasks */
+#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001
+#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002
+
+/* VT_CTL bitmasks */
+#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */
+#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */
+#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */
+#define IXGBE_VT_CTL_POOL_SHIFT 7
+#define IXGBE_VT_CTL_POOL_MASK (0x3F << IXGBE_VT_CTL_POOL_SHIFT)
+
+/* VMOLR bitmasks */
+#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */
+#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */
+#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */
+#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */
+#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */
+
+/* VFRE bitmask */
+#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF
+
+#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
+
+/* RDHMPN and TDHMPN bitmasks */
+#define IXGBE_RDHMPN_RDICADDR 0x007FF800
+#define IXGBE_RDHMPN_RDICRDREQ 0x00800000
+#define IXGBE_RDHMPN_RDICADDR_SHIFT 11
+#define IXGBE_TDHMPN_TDICADDR 0x003FF800
+#define IXGBE_TDHMPN_TDICRDREQ 0x00800000
+#define IXGBE_TDHMPN_TDICADDR_SHIFT 11
+
+#define IXGBE_RDMAM_MEM_SEL_SHIFT 13
+#define IXGBE_RDMAM_DWORD_SHIFT 9
+#define IXGBE_RDMAM_DESC_COMP_FIFO 1
+#define IXGBE_RDMAM_DFC_CMD_FIFO 2
+#define IXGBE_RDMAM_RSC_HEADER_ADDR 3
+#define IXGBE_RDMAM_TCN_STATUS_RAM 4
+#define IXGBE_RDMAM_WB_COLL_FIFO 5
+#define IXGBE_RDMAM_QSC_CNT_RAM 6
+#define IXGBE_RDMAM_QSC_FCOE_RAM 7
+#define IXGBE_RDMAM_QSC_QUEUE_CNT 8
+#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA
+#define IXGBE_RDMAM_QSC_RSC_RAM 0xB
+#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135
+#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4
+#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48
+#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7
+#define IXGBE_RDMAM_RSC_HEADER_ADDR_RANGE 32
+#define IXGBE_RDMAM_RSC_HEADER_ADDR_COUNT 4
+#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256
+#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9
+#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8
+#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4
+#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64
+#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4
+#define IXGBE_RDMAM_QSC_FCOE_RAM_RANGE 512
+#define IXGBE_RDMAM_QSC_FCOE_RAM_COUNT 5
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8
+#define IXGBE_RDMAM_QSC_RSC_RAM_RANGE 32
+#define IXGBE_RDMAM_QSC_RSC_RAM_COUNT 8
+
+#define IXGBE_TXDESCIC_READY 0x80000000
+
+/* Receive Checksum Control */
+#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* FCRTL Bit Masks */
+#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */
+#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */
+
+/* PAP bit masks*/
+#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */
+
+/* RMCS Bit Masks */
+#define IXGBE_RMCS_RRM 0x00000002 /* Rx Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RMCS_RAC 0x00000004
+/* Deficit Fixed Prio ena */
+#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC
+#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */
+#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */
+#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */
+
+/* FCCFG Bit Masks */
+#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */
+#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */
+
+/* Interrupt register bitmasks */
+
+/* Extended Interrupt Cause Read */
+#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */
+#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */
+#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */
+#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */
+#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */
+#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */
+#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */
+#define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */
+#define IXGBE_EICR_TIMESYNC 0x01000000 /* Timesync Event */
+#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */
+#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */
+#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */
+#define IXGBE_EICR_GPI_SDP0_X540 0x02000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICR_GPI_SDP1_X540 0x04000000 /* Gen Purpose Interrupt on SDP1 */
+#define IXGBE_EICR_GPI_SDP2_X540 0x08000000 /* Gen Purpose Interrupt on SDP2 */
+#define IXGBE_EICR_GPI_SDP0_X550 IXGBE_EICR_GPI_SDP0_X540
+#define IXGBE_EICR_GPI_SDP1_X550 IXGBE_EICR_GPI_SDP1_X540
+#define IXGBE_EICR_GPI_SDP2_X550 IXGBE_EICR_GPI_SDP2_X540
+#define IXGBE_EICR_GPI_SDP0_X550EM_x IXGBE_EICR_GPI_SDP0_X540
+#define IXGBE_EICR_GPI_SDP1_X550EM_x IXGBE_EICR_GPI_SDP1_X540
+#define IXGBE_EICR_GPI_SDP2_X550EM_x IXGBE_EICR_GPI_SDP2_X540
+#define IXGBE_EICR_GPI_SDP0_BY_MAC(_hw) IXGBE_BY_MAC((_hw), EICR_GPI_SDP0)
+#define IXGBE_EICR_GPI_SDP1_BY_MAC(_hw) IXGBE_BY_MAC((_hw), EICR_GPI_SDP1)
+#define IXGBE_EICR_GPI_SDP2_BY_MAC(_hw) IXGBE_BY_MAC((_hw), EICR_GPI_SDP2)
+
+#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */
+#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */
+#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
+#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
+
+/* Extended Interrupt Cause Set */
+#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */
+#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EICS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */
+#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EICS_GPI_SDP0_BY_MAC(_hw) IXGBE_EICR_GPI_SDP0_BY_MAC(_hw)
+#define IXGBE_EICS_GPI_SDP1_BY_MAC(_hw) IXGBE_EICR_GPI_SDP1_BY_MAC(_hw)
+#define IXGBE_EICS_GPI_SDP2_BY_MAC(_hw) IXGBE_EICR_GPI_SDP2_BY_MAC(_hw)
+#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */
+#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Set */
+#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermal Sensor Event */
+#define IXGBE_EIMS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */
+#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EIMS_GPI_SDP0_BY_MAC(_hw) IXGBE_EICR_GPI_SDP0_BY_MAC(_hw)
+#define IXGBE_EIMS_GPI_SDP1_BY_MAC(_hw) IXGBE_EICR_GPI_SDP1_BY_MAC(_hw)
+#define IXGBE_EIMS_GPI_SDP2_BY_MAC(_hw) IXGBE_EICR_GPI_SDP2_BY_MAC(_hw)
+#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */
+#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Clear */
+#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EIMC_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */
+#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EIMC_GPI_SDP0_BY_MAC(_hw) IXGBE_EICR_GPI_SDP0_BY_MAC(_hw)
+#define IXGBE_EIMC_GPI_SDP1_BY_MAC(_hw) IXGBE_EICR_GPI_SDP1_BY_MAC(_hw)
+#define IXGBE_EIMC_GPI_SDP2_BY_MAC(_hw) IXGBE_EICR_GPI_SDP2_BY_MAC(_hw)
+#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */
+#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+#define IXGBE_EIMS_ENABLE_MASK ( \
+ IXGBE_EIMS_RTX_QUEUE | \
+ IXGBE_EIMS_LSC | \
+ IXGBE_EIMS_TCP_TIMER | \
+ IXGBE_EIMS_OTHER)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */
+#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */
+#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
+#define IXGBE_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */
+#define IXGBE_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */
+#define IXGBE_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */
+#define IXGBE_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */
+#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */
+#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */
+#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */
+#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */
+#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */
+#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */
+#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */
+#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */
+#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */
+#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */
+#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass chk of ctrl bits */
+#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */
+#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */
+#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */
+#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */
+#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */
+
+#define IXGBE_MAX_FTQF_FILTERS 128
+#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003
+#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000
+#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001
+#define IXGBE_FTQF_PROTOCOL_SCTP 2
+#define IXGBE_FTQF_PRIORITY_MASK 0x00000007
+#define IXGBE_FTQF_PRIORITY_SHIFT 2
+#define IXGBE_FTQF_POOL_MASK 0x0000003F
+#define IXGBE_FTQF_POOL_SHIFT 8
+#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F
+#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25
+#define IXGBE_FTQF_SOURCE_ADDR_MASK 0x1E
+#define IXGBE_FTQF_DEST_ADDR_MASK 0x1D
+#define IXGBE_FTQF_SOURCE_PORT_MASK 0x1B
+#define IXGBE_FTQF_DEST_PORT_MASK 0x17
+#define IXGBE_FTQF_PROTOCOL_COMP_MASK 0x0F
+#define IXGBE_FTQF_POOL_MASK_EN 0x40000000
+#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000
+
+/* Interrupt clear mask */
+#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF
+
+/* Interrupt Vector Allocation Registers */
+#define IXGBE_IVAR_REG_NUM 25
+#define IXGBE_IVAR_REG_NUM_82599 64
+#define IXGBE_IVAR_TXRX_ENTRY 96
+#define IXGBE_IVAR_RX_ENTRY 64
+#define IXGBE_IVAR_RX_QUEUE(_i) (0 + (_i))
+#define IXGBE_IVAR_TX_QUEUE(_i) (64 + (_i))
+#define IXGBE_IVAR_TX_ENTRY 32
+
+#define IXGBE_IVAR_TCP_TIMER_INDEX 96 /* 0 based index */
+#define IXGBE_IVAR_OTHER_CAUSES_INDEX 97 /* 0 based index */
+
+#define IXGBE_MSIX_VECTOR(_i) (0 + (_i))
+
+#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */
+
+/* ETYPE Queue Filter/Select Bit Masks */
+#define IXGBE_MAX_ETQF_FILTERS 8
+#define IXGBE_ETQF_FCOE 0x08000000 /* bit 27 */
+#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */
+#define IXGBE_ETQF_TX_ANTISPOOF 0x20000000 /* bit 29 */
+#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */
+#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */
+#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */
+#define IXGBE_ETQF_POOL_SHIFT 20
+
+#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */
+#define IXGBE_ETQS_RX_QUEUE_SHIFT 16
+#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */
+#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */
+
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ * to avoid filter collisions later. Add new filters
+ * here!!
+ *
+ * Current filters:
+ * EAPOL 802.1x (0x888e): Filter 0
+ * FCoE (0x8906): Filter 2
+ * 1588 (0x88f7): Filter 3
+ * FIP (0x8914): Filter 4
+ * LLDP (0x88CC): Filter 5
+ * LACP (0x8809): Filter 6
+ */
+#define IXGBE_ETQF_FILTER_EAPOL 0
+#define IXGBE_ETQF_FILTER_FCOE 2
+#define IXGBE_ETQF_FILTER_1588 3
+#define IXGBE_ETQF_FILTER_FIP 4
+#define IXGBE_ETQF_FILTER_LLDP 5
+#define IXGBE_ETQF_FILTER_LACP 6
+/* VLAN Control Bit Masks */
+#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */
+#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */
+#define IXGBE_VLNCTRL_CFIEN 0x20000000 /* bit 29 */
+#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */
+#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */
+
+/* VLAN pool filtering masks */
+#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */
+#define IXGBE_VLVF_ENTRIES 64
+#define IXGBE_VLVF_VLANID_MASK 0x00000FFF
+/* Per VF Port VLAN insertion rules */
+#define IXGBE_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
+#define IXGBE_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
+
+#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */
+
+/* STATUS Bit Masks */
+#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */
+#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/
+#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Ena Status */
+
+#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */
+#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */
+
+/* ESDP Bit Masks */
+#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */
+#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */
+#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */
+#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */
+#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */
+#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
+#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
+#define IXGBE_ESDP_SDP7 0x00000080 /* SDP7 Data Value */
+#define IXGBE_ESDP_SDP0_DIR 0x00000100 /* SDP0 IO direction */
+#define IXGBE_ESDP_SDP1_DIR 0x00000200 /* SDP1 IO direction */
+#define IXGBE_ESDP_SDP2_DIR 0x00000400 /* SDP1 IO direction */
+#define IXGBE_ESDP_SDP3_DIR 0x00000800 /* SDP3 IO direction */
+#define IXGBE_ESDP_SDP4_DIR 0x00001000 /* SDP4 IO direction */
+#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */
+#define IXGBE_ESDP_SDP6_DIR 0x00004000 /* SDP6 IO direction */
+#define IXGBE_ESDP_SDP7_DIR 0x00008000 /* SDP7 IO direction */
+#define IXGBE_ESDP_SDP0_NATIVE 0x00010000 /* SDP0 IO mode */
+#define IXGBE_ESDP_SDP1_NATIVE 0x00020000 /* SDP1 IO mode */
+
+
+/* LEDCTL Bit Masks */
+#define IXGBE_LED_IVRT_BASE 0x00000040
+#define IXGBE_LED_BLINK_BASE 0x00000080
+#define IXGBE_LED_MODE_MASK_BASE 0x0000000F
+#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i)))
+#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i))
+#define IXGBE_LED_IVRT(_i) IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i)
+#define IXGBE_LED_BLINK(_i) IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i)
+#define IXGBE_LED_MODE_MASK(_i) IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i)
+#define IXGBE_X557_LED_MANUAL_SET_MASK (1 << 8)
+#define IXGBE_X557_MAX_LED_INDEX 3
+#define IXGBE_X557_LED_PROVISIONING 0xC430
+
+/* LED modes */
+#define IXGBE_LED_LINK_UP 0x0
+#define IXGBE_LED_LINK_10G 0x1
+#define IXGBE_LED_MAC 0x2
+#define IXGBE_LED_FILTER 0x3
+#define IXGBE_LED_LINK_ACTIVE 0x4
+#define IXGBE_LED_LINK_1G 0x5
+#define IXGBE_LED_ON 0xE
+#define IXGBE_LED_OFF 0xF
+
+/* AUTOC Bit Masks */
+#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000
+#define IXGBE_AUTOC_KX4_SUPP 0x80000000
+#define IXGBE_AUTOC_KX_SUPP 0x40000000
+#define IXGBE_AUTOC_PAUSE 0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE 0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE 0x10000000
+#define IXGBE_AUTOC_RF 0x08000000
+#define IXGBE_AUTOC_PD_TMR 0x06000000
+#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
+#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000
+#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000
+#define IXGBE_AUTOC_FECA 0x00040000
+#define IXGBE_AUTOC_FECR 0x00020000
+#define IXGBE_AUTOC_KR_SUPP 0x00010000
+#define IXGBE_AUTOC_AN_RESTART 0x00001000
+#define IXGBE_AUTOC_FLU 0x00000001
+#define IXGBE_AUTOC_LMS_SHIFT 13
+#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200
+#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9
+#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180
+#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7
+#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16
+#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK 0x50000000
+#define IXGBE_AUTOC2_LINK_DISABLE_MASK 0x70000000
+
+#define IXGBE_MACC_FLU 0x00000001
+#define IXGBE_MACC_FSV_10G 0x00030000
+#define IXGBE_MACC_FS 0x00040000
+#define IXGBE_MAC_RX2TX_LPBK 0x00000002
+
+/* Veto Bit definiton */
+#define IXGBE_MMNGC_MNG_VETO 0x00000001
+
+/* LINKS Bit Masks */
+#define IXGBE_LINKS_KX_AN_COMP 0x80000000
+#define IXGBE_LINKS_UP 0x40000000
+#define IXGBE_LINKS_SPEED 0x20000000
+#define IXGBE_LINKS_MODE 0x18000000
+#define IXGBE_LINKS_RX_MODE 0x06000000
+#define IXGBE_LINKS_TX_MODE 0x01800000
+#define IXGBE_LINKS_XGXS_EN 0x00400000
+#define IXGBE_LINKS_SGMII_EN 0x02000000
+#define IXGBE_LINKS_PCS_1G_EN 0x00200000
+#define IXGBE_LINKS_1G_AN_EN 0x00100000
+#define IXGBE_LINKS_KX_AN_IDLE 0x00080000
+#define IXGBE_LINKS_1G_SYNC 0x00040000
+#define IXGBE_LINKS_10G_ALIGN 0x00020000
+#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000
+#define IXGBE_LINKS_TL_FAULT 0x00001000
+#define IXGBE_LINKS_SIGNAL 0x00000F00
+
+#define IXGBE_LINKS_SPEED_NON_STD 0x08000000
+#define IXGBE_LINKS_SPEED_82599 0x30000000
+#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
+#define IXGBE_LINKS_SPEED_1G_82599 0x20000000
+#define IXGBE_LINKS_SPEED_100_82599 0x10000000
+#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */
+#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+
+#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040
+
+/* PCS1GLSTA Bit Masks */
+#define IXGBE_PCS1GLSTA_LINK_OK 1
+#define IXGBE_PCS1GLSTA_SYNK_OK 0x10
+#define IXGBE_PCS1GLSTA_AN_COMPLETE 0x10000
+#define IXGBE_PCS1GLSTA_AN_PAGE_RX 0x20000
+#define IXGBE_PCS1GLSTA_AN_TIMED_OUT 0x40000
+#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000
+#define IXGBE_PCS1GLSTA_AN_ERROR_RWS 0x100000
+
+#define IXGBE_PCS1GANA_SYM_PAUSE 0x80
+#define IXGBE_PCS1GANA_ASM_PAUSE 0x100
+
+/* PCS1GLCTL Bit Masks */
+#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */
+#define IXGBE_PCS1GLCTL_FLV_LINK_UP 1
+#define IXGBE_PCS1GLCTL_FORCE_LINK 0x20
+#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH 0x40
+#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000
+#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000
+
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE 0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE 0x0400
+#define IXGBE_ANLP1_ASM_PAUSE 0x0800
+#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000
+
+/* SW Semaphore Register bitmasks */
+#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */
+
+/* SW_FW_SYNC/GSSR definitions */
+#define IXGBE_GSSR_EEP_SM 0x0001
+#define IXGBE_GSSR_PHY0_SM 0x0002
+#define IXGBE_GSSR_PHY1_SM 0x0004
+#define IXGBE_GSSR_MAC_CSR_SM 0x0008
+#define IXGBE_GSSR_FLASH_SM 0x0010
+#define IXGBE_GSSR_NVM_UPDATE_SM 0x0200
+#define IXGBE_GSSR_SW_MNG_SM 0x0400
+#define IXGBE_GSSR_SHARED_I2C_SM 0x1806 /* Wait for both phys and both I2Cs */
+#define IXGBE_GSSR_I2C_MASK 0x1800
+#define IXGBE_GSSR_NVM_PHY_MASK 0xF
+
+/* FW Status register bitmask */
+#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */
+
+/* EEC Register */
+#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */
+#define IXGBE_EEC_CS 0x00000002 /* EEPROM Chip Select */
+#define IXGBE_EEC_DI 0x00000004 /* EEPROM Data In */
+#define IXGBE_EEC_DO 0x00000008 /* EEPROM Data Out */
+#define IXGBE_EEC_FWE_MASK 0x00000030 /* FLASH Write Enable */
+#define IXGBE_EEC_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define IXGBE_EEC_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define IXGBE_EEC_FWE_SHIFT 4
+#define IXGBE_EEC_REQ 0x00000040 /* EEPROM Access Request */
+#define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */
+#define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */
+#define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */
+#define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */
+#define IXGBE_EEC_SEC1VAL 0x02000000 /* Sector 1 Valid */
+#define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */
+/* EEPROM Addressing bits based on type (0-small, 1-large) */
+#define IXGBE_EEC_ADDR_SIZE 0x00000400
+#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */
+#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */
+
+#define IXGBE_EEC_SIZE_SHIFT 11
+#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6
+#define IXGBE_EEPROM_OPCODE_BITS 8
+
+/* FLA Register */
+#define IXGBE_FLA_LOCKED 0x00000040
+
+/* Part Number String Length */
+#define IXGBE_PBANUM_LENGTH 11
+
+/* Checksum and EEPROM pointers */
+#define IXGBE_PBANUM_PTR_GUARD 0xFAFA
+#define IXGBE_EEPROM_CHECKSUM 0x3F
+#define IXGBE_EEPROM_SUM 0xBABA
+#define IXGBE_PCIE_ANALOG_PTR 0x03
+#define IXGBE_ATLAS0_CONFIG_PTR 0x04
+#define IXGBE_PHY_PTR 0x04
+#define IXGBE_ATLAS1_CONFIG_PTR 0x05
+#define IXGBE_OPTION_ROM_PTR 0x05
+#define IXGBE_PCIE_GENERAL_PTR 0x06
+#define IXGBE_PCIE_CONFIG0_PTR 0x07
+#define IXGBE_PCIE_CONFIG1_PTR 0x08
+#define IXGBE_CORE0_PTR 0x09
+#define IXGBE_CORE1_PTR 0x0A
+#define IXGBE_MAC0_PTR 0x0B
+#define IXGBE_MAC1_PTR 0x0C
+#define IXGBE_CSR0_CONFIG_PTR 0x0D
+#define IXGBE_CSR1_CONFIG_PTR 0x0E
+#define IXGBE_PCIE_ANALOG_PTR_X550 0x02
+#define IXGBE_SHADOW_RAM_SIZE_X550 0x4000
+#define IXGBE_IXGBE_PCIE_GENERAL_SIZE 0x24
+#define IXGBE_PCIE_CONFIG_SIZE 0x08
+#define IXGBE_EEPROM_LAST_WORD 0x41
+#define IXGBE_FW_PTR 0x0F
+#define IXGBE_PBANUM0_PTR 0x15
+#define IXGBE_PBANUM1_PTR 0x16
+#define IXGBE_ALT_MAC_ADDR_PTR 0x37
+#define IXGBE_FREE_SPACE_PTR 0X3E
+
+/* External Thermal Sensor Config */
+#define IXGBE_ETS_CFG 0x26
+#define IXGBE_ETS_LTHRES_DELTA_MASK 0x07C0
+#define IXGBE_ETS_LTHRES_DELTA_SHIFT 6
+#define IXGBE_ETS_TYPE_MASK 0x0038
+#define IXGBE_ETS_TYPE_SHIFT 3
+#define IXGBE_ETS_TYPE_EMC 0x000
+#define IXGBE_ETS_NUM_SENSORS_MASK 0x0007
+#define IXGBE_ETS_DATA_LOC_MASK 0x3C00
+#define IXGBE_ETS_DATA_LOC_SHIFT 10
+#define IXGBE_ETS_DATA_INDEX_MASK 0x0300
+#define IXGBE_ETS_DATA_INDEX_SHIFT 8
+#define IXGBE_ETS_DATA_HTHRESH_MASK 0x00FF
+
+#define IXGBE_SAN_MAC_ADDR_PTR 0x28
+#define IXGBE_DEVICE_CAPS 0x2C
+#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
+#define IXGBE_PCIE_MSIX_82599_CAPS 0x72
+#define IXGBE_MAX_MSIX_VECTORS_82599 0x40
+#define IXGBE_PCIE_MSIX_82598_CAPS 0x62
+#define IXGBE_MAX_MSIX_VECTORS_82598 0x13
+
+/* MSI-X capability fields masks */
+#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF
+
+/* Legacy EEPROM word offsets */
+#define IXGBE_ISCSI_BOOT_CAPS 0x0033
+#define IXGBE_ISCSI_SETUP_PORT_0 0x0030
+#define IXGBE_ISCSI_SETUP_PORT_1 0x0034
+
+/* EEPROM Commands - SPI */
+#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */
+#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01
+#define IXGBE_EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */
+#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */
+/* EEPROM reset Write Enable latch */
+#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04
+#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */
+#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */
+#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+
+/* EEPROM Read Register */
+#define IXGBE_EEPROM_RW_REG_DATA 16 /* data offset in EEPROM read reg */
+#define IXGBE_EEPROM_RW_REG_DONE 2 /* Offset to READ done bit */
+#define IXGBE_EEPROM_RW_REG_START 1 /* First bit to start operation */
+#define IXGBE_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for wr complete */
+#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for rd complete */
+
+#define NVM_INIT_CTRL_3 0x38
+#define NVM_INIT_CTRL_3_LPLU 0x8
+#define NVM_INIT_CTRL_3_D10GMP_PORT0 0x40
+#define NVM_INIT_CTRL_3_D10GMP_PORT1 0x100
+
+#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
+
+#define IXGBE_EEPROM_PAGE_SIZE_MAX 128
+#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 256 /* words rd in burst */
+#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* words wr in burst */
+#define IXGBE_EEPROM_CTRL_2 1 /* EEPROM CTRL word 2 */
+#define IXGBE_EEPROM_CCD_BIT 2
+
+#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
+#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM attempts to gain grant */
+#endif
+
+/* Number of 5 microseconds we wait for EERD read and
+ * EERW write to complete */
+#define IXGBE_EERD_EEWR_ATTEMPTS 100000
+
+/* # attempts we wait for flush update to complete */
+#define IXGBE_FLUDONE_ATTEMPTS 20000
+
+#define IXGBE_PCIE_CTRL2 0x5 /* PCIe Control 2 Offset */
+#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE 0x8 /* Dummy Function Enable */
+#define IXGBE_PCIE_CTRL2_LAN_DISABLE 0x2 /* LAN PCI Disable */
+#define IXGBE_PCIE_CTRL2_DISABLE_SELECT 0x1 /* LAN Disable Select */
+
+#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0
+#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3
+#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1
+#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2
+#define IXGBE_FW_LESM_PARAMETERS_PTR 0x2
+#define IXGBE_FW_LESM_STATE_1 0x1
+#define IXGBE_FW_LESM_STATE_ENABLED 0x8000 /* LESM Enable bit */
+#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4
+#define IXGBE_FW_PATCH_VERSION_4 0x7
+#define IXGBE_FCOE_IBA_CAPS_BLK_PTR 0x33 /* iSCSI/FCOE block */
+#define IXGBE_FCOE_IBA_CAPS_FCOE 0x20 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_BLK_PTR 0x17 /* iSCSI/FCOE block */
+#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET 0x0 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE 0x1 /* FCOE flags enable bit */
+#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR 0x27 /* Alt. SAN MAC block */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET 0x0 /* Alt SAN MAC capability */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt SAN MAC 0 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt SAN MAC 1 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET 0x7 /* Alt WWNN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET 0x8 /* Alt WWPN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC 0x0 /* Alt SAN MAC exists */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN 0x1 /* Alt WWN base exists */
+
+/* FW header offset */
+#define IXGBE_X540_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4
+#define IXGBE_X540_FW_MODULE_MASK 0x7FFF
+/* 4KB multiplier */
+#define IXGBE_X540_FW_MODULE_LENGTH 0x1000
+/* version word 2 (month & day) */
+#define IXGBE_X540_FW_PATCH_VERSION_2 0x5
+/* version word 3 (silicon compatibility & year) */
+#define IXGBE_X540_FW_PATCH_VERSION_3 0x6
+/* version word 4 (major & minor numbers) */
+#define IXGBE_X540_FW_PATCH_VERSION_4 0x7
+
+#define IXGBE_DEVICE_CAPS_WOL_PORT0_1 0x4 /* WoL supported on ports 0 & 1 */
+#define IXGBE_DEVICE_CAPS_WOL_PORT0 0x8 /* WoL supported on port 0 */
+#define IXGBE_DEVICE_CAPS_WOL_MASK 0xC /* Mask for WoL capabilities */
+
+/* PCI Bus Info */
+#define IXGBE_PCI_DEVICE_STATUS 0xAA
+#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020
+#define IXGBE_PCI_LINK_STATUS 0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
+#define IXGBE_PCI_LINK_WIDTH 0x3F0
+#define IXGBE_PCI_LINK_WIDTH_1 0x10
+#define IXGBE_PCI_LINK_WIDTH_2 0x20
+#define IXGBE_PCI_LINK_WIDTH_4 0x40
+#define IXGBE_PCI_LINK_WIDTH_8 0x80
+#define IXGBE_PCI_LINK_SPEED 0xF
+#define IXGBE_PCI_LINK_SPEED_2500 0x1
+#define IXGBE_PCI_LINK_SPEED_5000 0x2
+#define IXGBE_PCI_LINK_SPEED_8000 0x3
+#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
+#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
+
+#define IXGBE_PCIDEVCTRL2_TIMEO_MASK 0xf
+#define IXGBE_PCIDEVCTRL2_16_32ms_def 0x0
+#define IXGBE_PCIDEVCTRL2_50_100us 0x1
+#define IXGBE_PCIDEVCTRL2_1_2ms 0x2
+#define IXGBE_PCIDEVCTRL2_16_32ms 0x5
+#define IXGBE_PCIDEVCTRL2_65_130ms 0x6
+#define IXGBE_PCIDEVCTRL2_260_520ms 0x9
+#define IXGBE_PCIDEVCTRL2_1_2s 0xa
+#define IXGBE_PCIDEVCTRL2_4_8s 0xd
+#define IXGBE_PCIDEVCTRL2_17_34s 0xe
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
+
+/* Check whether address is multicast. This is little-endian specific check.*/
+#define IXGBE_IS_MULTICAST(Address) \
+ (bool)(((u8 *)(Address))[0] & ((u8)0x01))
+
+/* Check whether an address is broadcast. */
+#define IXGBE_IS_BROADCAST(Address) \
+ ((((u8 *)(Address))[0] == ((u8)0xff)) && \
+ (((u8 *)(Address))[1] == ((u8)0xff)))
+
+/* RAH */
+#define IXGBE_RAH_VIND_MASK 0x003C0000
+#define IXGBE_RAH_VIND_SHIFT 18
+#define IXGBE_RAH_AV 0x80000000
+#define IXGBE_CLEAR_VMDQ_ALL 0xFFFFFFFF
+
+/* Header split receive */
+#define IXGBE_RFCTL_ISCSI_DIS 0x00000001
+#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1
+#define IXGBE_RFCTL_RSC_DIS 0x00000020
+#define IXGBE_RFCTL_NFSW_DIS 0x00000040
+#define IXGBE_RFCTL_NFSR_DIS 0x00000080
+#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300
+#define IXGBE_RFCTL_NFS_VER_SHIFT 8
+#define IXGBE_RFCTL_NFS_VER_2 0
+#define IXGBE_RFCTL_NFS_VER_3 1
+#define IXGBE_RFCTL_NFS_VER_4 2
+#define IXGBE_RFCTL_IPV6_DIS 0x00000400
+#define IXGBE_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define IXGBE_RFCTL_IPFRSP_DIS 0x00004000
+#define IXGBE_RFCTL_IPV6_EX_DIS 0x00010000
+#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Transmit Config masks */
+#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Ena specific Tx Queue */
+#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wr-bk flushing */
+#define IXGBE_TXDCTL_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */
+/* Enable short packet padding to 64 bytes */
+#define IXGBE_TX_PAD_ENABLE 0x00000400
+#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */
+/* This allows for 16K packets + 4k for vlan */
+#define IXGBE_MAX_FRAME_SZ 0x40040000
+
+#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */
+#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq# write-back enable */
+
+/* Receive Config masks */
+#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
+#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Desc Monitor Bypass */
+#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Ena specific Rx Queue */
+#define IXGBE_RXDCTL_SWFLSH 0x04000000 /* Rx Desc wr-bk flushing */
+#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* X540 supported only */
+#define IXGBE_RXDCTL_RLPML_EN 0x00008000
+#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
+
+#define IXGBE_TSAUXC_EN_CLK 0x00000004
+#define IXGBE_TSAUXC_SYNCLK 0x00000008
+#define IXGBE_TSAUXC_SDP0_INT 0x00000040
+#define IXGBE_TSAUXC_EN_TT0 0x00000001
+#define IXGBE_TSAUXC_EN_TT1 0x00000002
+#define IXGBE_TSAUXC_ST0 0x00000010
+#define IXGBE_TSAUXC_DISABLE_SYSTIME 0x80000000
+
+#define IXGBE_TSSDP_TS_SDP0_SEL_MASK 0x000000C0
+#define IXGBE_TSSDP_TS_SDP0_CLK0 0x00000080
+#define IXGBE_TSSDP_TS_SDP0_EN 0x00000100
+
+#define IXGBE_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */
+#define IXGBE_TSYNCTXCTL_ENABLED 0x00000010 /* Tx timestamping enabled */
+
+#define IXGBE_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */
+#define IXGBE_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */
+#define IXGBE_TSYNCRXCTL_TYPE_L2_V2 0x00
+#define IXGBE_TSYNCRXCTL_TYPE_L4_V1 0x02
+#define IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2 0x04
+#define IXGBE_TSYNCRXCTL_TYPE_ALL 0x08
+#define IXGBE_TSYNCRXCTL_TYPE_EVENT_V2 0x0A
+#define IXGBE_TSYNCRXCTL_ENABLED 0x00000010 /* Rx Timestamping enabled */
+#define IXGBE_TSYNCRXCTL_TSIP_UT_EN 0x00800000 /* Rx Timestamp in Packet */
+#define IXGBE_TSYNCRXCTL_TSIP_UP_MASK 0xFF000000 /* Rx Timestamp UP Mask */
+
+#define IXGBE_TSIM_SYS_WRAP 0x00000001
+#define IXGBE_TSIM_TXTS 0x00000002
+#define IXGBE_TSIM_TADJ 0x00000080
+
+#define IXGBE_TSICR_SYS_WRAP IXGBE_TSIM_SYS_WRAP
+#define IXGBE_TSICR_TXTS IXGBE_TSIM_TXTS
+#define IXGBE_TSICR_TADJ IXGBE_TSIM_TADJ
+
+#define IXGBE_RXMTRL_V1_CTRLT_MASK 0x000000FF
+#define IXGBE_RXMTRL_V1_SYNC_MSG 0x00
+#define IXGBE_RXMTRL_V1_DELAY_REQ_MSG 0x01
+#define IXGBE_RXMTRL_V1_FOLLOWUP_MSG 0x02
+#define IXGBE_RXMTRL_V1_DELAY_RESP_MSG 0x03
+#define IXGBE_RXMTRL_V1_MGMT_MSG 0x04
+
+#define IXGBE_RXMTRL_V2_MSGID_MASK 0x0000FF00
+#define IXGBE_RXMTRL_V2_SYNC_MSG 0x0000
+#define IXGBE_RXMTRL_V2_DELAY_REQ_MSG 0x0100
+#define IXGBE_RXMTRL_V2_PDELAY_REQ_MSG 0x0200
+#define IXGBE_RXMTRL_V2_PDELAY_RESP_MSG 0x0300
+#define IXGBE_RXMTRL_V2_FOLLOWUP_MSG 0x0800
+#define IXGBE_RXMTRL_V2_DELAY_RESP_MSG 0x0900
+#define IXGBE_RXMTRL_V2_PDELAY_FOLLOWUP_MSG 0x0A00
+#define IXGBE_RXMTRL_V2_ANNOUNCE_MSG 0x0B00
+#define IXGBE_RXMTRL_V2_SIGNALLING_MSG 0x0C00
+#define IXGBE_RXMTRL_V2_MGMT_MSG 0x0D00
+
+#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
+#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
+#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */
+#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */
+#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */
+#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */
+/* Receive Priority Flow Control Enable */
+#define IXGBE_FCTRL_RPFCE 0x00004000
+#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */
+#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */
+#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */
+#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */
+#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */
+#define IXGBE_MFLCN_RPFCE_MASK 0x00000FF4 /* Rx Priority FC bitmap mask */
+#define IXGBE_MFLCN_RPFCE_SHIFT 4 /* Rx Priority FC bitmap shift */
+
+/* Multiple Receive Queue Control */
+#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */
+#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */
+#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */
+#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */
+#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */
+#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */
+#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */
+#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */
+#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */
+#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define IXGBE_MRQC_RSS_FIELD_IPV6 0x00100000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000
+#define IXGBE_MRQC_MULTIPLE_RSS 0x00002000
+#define IXGBE_MRQC_L3L4TXSWEN 0x00008000
+
+/* Queue Drop Enable */
+#define IXGBE_QDE_ENABLE 0x00000001
+#define IXGBE_QDE_HIDE_VLAN 0x00000002
+#define IXGBE_QDE_IDX_MASK 0x00007F00
+#define IXGBE_QDE_IDX_SHIFT 8
+#define IXGBE_QDE_WRITE 0x00010000
+#define IXGBE_QDE_READ 0x00020000
+
+#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */
+#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */
+#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+
+#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000
+#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000
+#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000
+/* Multiple Transmit Queue Command Register */
+#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */
+#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */
+#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */
+#define IXGBE_MTQC_32VF 0x8 /* 4 TX Queues per pool w/32VF's */
+#define IXGBE_MTQC_64VF 0x4 /* 2 TX Queues per pool w/64VF's */
+#define IXGBE_MTQC_4TC_4TQ 0x8 /* 4 TC if RT_ENA and VT_ENA */
+#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
+
+/* Receive Descriptor bit definitions */
+#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */
+#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */
+#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */
+#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004
+#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */
+#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */
+#define IXGBE_RXD_STAT_OUTERIPCS 0x100 /* Cloud IP xsum calculated */
+#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */
+#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */
+#define IXGBE_RXD_STAT_TSIP 0x08000 /* Time Stamp in packet buffer */
+#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */
+#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */
+#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */
+#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */
+#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */
+#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */
+#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */
+#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */
+#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */
+#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */
+#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */
+#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_OUTERIPER 0x04000000 /* CRC IP Header error */
+#define IXGBE_RXDADV_ERR_RXE 0x20000000 /* Any MAC Error */
+#define IXGBE_RXDADV_ERR_FCEOFE 0x80000000 /* FCEOFe/IPE */
+#define IXGBE_RXDADV_ERR_FCERR 0x00700000 /* FCERR/FDIRERR */
+#define IXGBE_RXDADV_ERR_FDIR_LEN 0x00100000 /* FDIR Length error */
+#define IXGBE_RXDADV_ERR_FDIR_DROP 0x00200000 /* FDIR Drop error */
+#define IXGBE_RXDADV_ERR_FDIR_COLL 0x00400000 /* FDIR Collision error */
+#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */
+#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */
+#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */
+#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */
+#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */
+#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */
+#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */
+#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */
+#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define IXGBE_RXD_PRI_SHIFT 13
+#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define IXGBE_RXD_CFI_SHIFT 12
+
+#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */
+#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */
+#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */
+#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */
+#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */
+#define IXGBE_RXDADV_STAT_TS 0x00010000 /* IEEE1588 Time Stamp */
+#define IXGBE_RXDADV_STAT_TSIP 0x00008000 /* Time Stamp in packet buffer */
+
+/* PSRTYPE bit definitions */
+#define IXGBE_PSRTYPE_TCPHDR 0x00000010
+#define IXGBE_PSRTYPE_UDPHDR 0x00000020
+#define IXGBE_PSRTYPE_IPV4HDR 0x00000100
+#define IXGBE_PSRTYPE_IPV6HDR 0x00000200
+#define IXGBE_PSRTYPE_L2HDR 0x00001000
+
+/* SRRCTL bit definitions */
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
+#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* 64byte resolution (>> 6)
+ * + at bit 8 offset (<< 8)
+ * = (<< 2)
+ */
+#define IXGBE_SRRCTL_RDMTS_SHIFT 22
+#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000
+#define IXGBE_SRRCTL_DROP_EN 0x10000000
+#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
+#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000
+
+#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F
+#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0
+#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0
+#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT 17
+#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5
+#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000
+#define IXGBE_RXDADV_SPH 0x8000
+
+/* RSS Hash results */
+#define IXGBE_RXDADV_RSSTYPE_NONE 0x00000000
+#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP 0x00000001
+#define IXGBE_RXDADV_RSSTYPE_IPV4 0x00000002
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP 0x00000003
+#define IXGBE_RXDADV_RSSTYPE_IPV6_EX 0x00000004
+#define IXGBE_RXDADV_RSSTYPE_IPV6 0x00000005
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP 0x00000007
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP 0x00000008
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor. */
+#define IXGBE_RXDADV_PKTTYPE_NONE 0x00000000
+#define IXGBE_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPv4 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPv4 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPv6 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPv6 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */
+#define IXGBE_RXDADV_PKTTYPE_VXLAN 0x00000800 /* VXLAN hdr present */
+#define IXGBE_RXDADV_PKTTYPE_TUNNEL 0x00010000 /* Tunnel type */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */
+#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */
+#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */
+
+/* Security Processing bit Indication */
+#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000
+#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000
+
+/* Masks to determine if packets should be dropped due to frame errors */
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXD_ERR_CE | \
+ IXGBE_RXD_ERR_LE | \
+ IXGBE_RXD_ERR_PE | \
+ IXGBE_RXD_ERR_OSE | \
+ IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXDADV_ERR_CE | \
+ IXGBE_RXDADV_ERR_LE | \
+ IXGBE_RXDADV_ERR_PE | \
+ IXGBE_RXDADV_ERR_OSE | \
+ IXGBE_RXDADV_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK_82599 IXGBE_RXDADV_ERR_RXE
+
+/* Multicast bit mask */
+#define IXGBE_MCSTCTRL_MFE 0x4
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8
+#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024
+
+/* Vlan-specific macros */
+#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority in upper 3 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */
+#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
+
+/* SR-IOV specific macros */
+#define IXGBE_MBVFICR_INDEX(vf_number) (vf_number >> 4)
+#define IXGBE_MBVFICR(_i) (0x00710 + ((_i) * 4))
+#define IXGBE_VFLRE(_i) (((_i & 1) ? 0x001C0 : 0x00600))
+#define IXGBE_VFLREC(_i) (0x00700 + ((_i) * 4))
+/* Translated register #defines */
+#define IXGBE_PVFCTRL(P) (0x00300 + (4 * (P)))
+#define IXGBE_PVFSTATUS(P) (0x00008 + (0 * (P)))
+#define IXGBE_PVFLINKS(P) (0x042A4 + (0 * (P)))
+#define IXGBE_PVFRTIMER(P) (0x00048 + (0 * (P)))
+#define IXGBE_PVFMAILBOX(P) (0x04C00 + (4 * (P)))
+#define IXGBE_PVFRXMEMWRAP(P) (0x03190 + (0 * (P)))
+#define IXGBE_PVTEICR(P) (0x00B00 + (4 * (P)))
+#define IXGBE_PVTEICS(P) (0x00C00 + (4 * (P)))
+#define IXGBE_PVTEIMS(P) (0x00D00 + (4 * (P)))
+#define IXGBE_PVTEIMC(P) (0x00E00 + (4 * (P)))
+#define IXGBE_PVTEIAC(P) (0x00F00 + (4 * (P)))
+#define IXGBE_PVTEIAM(P) (0x04D00 + (4 * (P)))
+#define IXGBE_PVTEITR(P) (((P) < 24) ? (0x00820 + ((P) * 4)) : \
+ (0x012300 + (((P) - 24) * 4)))
+#define IXGBE_PVTIVAR(P) (0x12500 + (4 * (P)))
+#define IXGBE_PVTIVAR_MISC(P) (0x04E00 + (4 * (P)))
+#define IXGBE_PVTRSCINT(P) (0x12000 + (4 * (P)))
+#define IXGBE_VFPBACL(P) (0x110C8 + (4 * (P)))
+#define IXGBE_PVFRDBAL(P) ((P < 64) ? (0x01000 + (0x40 * (P))) \
+ : (0x0D000 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDBAH(P) ((P < 64) ? (0x01004 + (0x40 * (P))) \
+ : (0x0D004 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDLEN(P) ((P < 64) ? (0x01008 + (0x40 * (P))) \
+ : (0x0D008 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDH(P) ((P < 64) ? (0x01010 + (0x40 * (P))) \
+ : (0x0D010 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRDT(P) ((P < 64) ? (0x01018 + (0x40 * (P))) \
+ : (0x0D018 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFRXDCTL(P) ((P < 64) ? (0x01028 + (0x40 * (P))) \
+ : (0x0D028 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFSRRCTL(P) ((P < 64) ? (0x01014 + (0x40 * (P))) \
+ : (0x0D014 + (0x40 * ((P) - 64))))
+#define IXGBE_PVFPSRTYPE(P) (0x0EA00 + (4 * (P)))
+#define IXGBE_PVFTDBAL(P) (0x06000 + (0x40 * (P)))
+#define IXGBE_PVFTDBAH(P) (0x06004 + (0x40 * (P)))
+#define IXGBE_PVFTTDLEN(P) (0x06008 + (0x40 * (P)))
+#define IXGBE_PVFTDH(P) (0x06010 + (0x40 * (P)))
+#define IXGBE_PVFTDT(P) (0x06018 + (0x40 * (P)))
+#define IXGBE_PVFTXDCTL(P) (0x06028 + (0x40 * (P)))
+#define IXGBE_PVFTDWBAL(P) (0x06038 + (0x40 * (P)))
+#define IXGBE_PVFTDWBAH(P) (0x0603C + (0x40 * (P)))
+#define IXGBE_PVFDCA_RXCTRL(P) (((P) < 64) ? (0x0100C + (0x40 * (P))) \
+ : (0x0D00C + (0x40 * ((P) - 64))))
+#define IXGBE_PVFDCA_TXCTRL(P) (0x0600C + (0x40 * (P)))
+#define IXGBE_PVFGPRC(x) (0x0101C + (0x40 * (x)))
+#define IXGBE_PVFGPTC(x) (0x08300 + (0x04 * (x)))
+#define IXGBE_PVFGORC_LSB(x) (0x01020 + (0x40 * (x)))
+#define IXGBE_PVFGORC_MSB(x) (0x0D020 + (0x40 * (x)))
+#define IXGBE_PVFGOTC_LSB(x) (0x08400 + (0x08 * (x)))
+#define IXGBE_PVFGOTC_MSB(x) (0x08404 + (0x08 * (x)))
+#define IXGBE_PVFMPRC(x) (0x0D01C + (0x40 * (x)))
+
+#define IXGBE_PVFTDWBALn(q_per_pool, vf_number, vf_q_index) \
+ (IXGBE_PVFTDWBAL((q_per_pool)*(vf_number) + (vf_q_index)))
+#define IXGBE_PVFTDWBAHn(q_per_pool, vf_number, vf_q_index) \
+ (IXGBE_PVFTDWBAH((q_per_pool)*(vf_number) + (vf_q_index)))
+
+#define IXGBE_PVFTDHn(q_per_pool, vf_number, vf_q_index) \
+ (IXGBE_PVFTDH((q_per_pool)*(vf_number) + (vf_q_index)))
+#define IXGBE_PVFTDTn(q_per_pool, vf_number, vf_q_index) \
+ (IXGBE_PVFTDT((q_per_pool)*(vf_number) + (vf_q_index)))
+
+/* Little Endian defines */
+#ifndef __le16
+#define __le16 u16
+#endif
+#ifndef __le32
+#define __le32 u32
+#endif
+#ifndef __le64
+#define __le64 u64
+
+#endif
+#ifndef __be16
+/* Big Endian defines */
+#define __be16 u16
+#define __be32 u32
+#define __be64 u64
+
+#endif
+enum ixgbe_fdir_pballoc_type {
+ IXGBE_FDIR_PBALLOC_NONE = 0,
+ IXGBE_FDIR_PBALLOC_64K = 1,
+ IXGBE_FDIR_PBALLOC_128K = 2,
+ IXGBE_FDIR_PBALLOC_256K = 3,
+};
+
+/* Flow Director register values */
+#define IXGBE_FDIRCTRL_PBALLOC_64K 0x00000001
+#define IXGBE_FDIRCTRL_PBALLOC_128K 0x00000002
+#define IXGBE_FDIRCTRL_PBALLOC_256K 0x00000003
+#define IXGBE_FDIRCTRL_INIT_DONE 0x00000008
+#define IXGBE_FDIRCTRL_PERFECT_MATCH 0x00000010
+#define IXGBE_FDIRCTRL_REPORT_STATUS 0x00000020
+#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS 0x00000080
+#define IXGBE_FDIRCTRL_DROP_Q_SHIFT 8
+#define IXGBE_FDIRCTRL_FLEX_SHIFT 16
+#define IXGBE_FDIRCTRL_FILTERMODE_SHIFT 21
+#define IXGBE_FDIRCTRL_FILTERMODE_MACVLAN 0x0001 /* bit 23:21, 001b */
+#define IXGBE_FDIRCTRL_FILTERMODE_CLOUD 0x0002 /* bit 23:21, 010b */
+#define IXGBE_FDIRCTRL_SEARCHLIM 0x00800000
+#define IXGBE_FDIRCTRL_FILTERMODE_MASK 0x00E00000
+#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT 24
+#define IXGBE_FDIRCTRL_FULL_THRESH_MASK 0xF0000000
+#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT 28
+
+#define IXGBE_FDIRTCPM_DPORTM_SHIFT 16
+#define IXGBE_FDIRUDPM_DPORTM_SHIFT 16
+#define IXGBE_FDIRIP6M_DIPM_SHIFT 16
+#define IXGBE_FDIRM_VLANID 0x00000001
+#define IXGBE_FDIRM_VLANP 0x00000002
+#define IXGBE_FDIRM_POOL 0x00000004
+#define IXGBE_FDIRM_L4P 0x00000008
+#define IXGBE_FDIRM_FLEX 0x00000010
+#define IXGBE_FDIRM_DIPv6 0x00000020
+#define IXGBE_FDIRM_L3P 0x00000040
+
+#define IXGBE_FDIRIP6M_INNER_MAC 0x03F0 /* bit 9:4 */
+#define IXGBE_FDIRIP6M_TUNNEL_TYPE 0x0800 /* bit 11 */
+#define IXGBE_FDIRIP6M_TNI_VNI 0xF000 /* bit 15:12 */
+#define IXGBE_FDIRIP6M_TNI_VNI_24 0x1000 /* bit 12 */
+#define IXGBE_FDIRIP6M_ALWAYS_MASK 0x040F /* bit 10, 3:0 */
+
+#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF
+#define IXGBE_FDIRFREE_FREE_SHIFT 0
+#define IXGBE_FDIRFREE_COLL_MASK 0x7FFF0000
+#define IXGBE_FDIRFREE_COLL_SHIFT 16
+#define IXGBE_FDIRLEN_MAXLEN_MASK 0x3F
+#define IXGBE_FDIRLEN_MAXLEN_SHIFT 0
+#define IXGBE_FDIRLEN_MAXHASH_MASK 0x7FFF0000
+#define IXGBE_FDIRLEN_MAXHASH_SHIFT 16
+#define IXGBE_FDIRUSTAT_ADD_MASK 0xFFFF
+#define IXGBE_FDIRUSTAT_ADD_SHIFT 0
+#define IXGBE_FDIRUSTAT_REMOVE_MASK 0xFFFF0000
+#define IXGBE_FDIRUSTAT_REMOVE_SHIFT 16
+#define IXGBE_FDIRFSTAT_FADD_MASK 0x00FF
+#define IXGBE_FDIRFSTAT_FADD_SHIFT 0
+#define IXGBE_FDIRFSTAT_FREMOVE_MASK 0xFF00
+#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT 8
+#define IXGBE_FDIRPORT_DESTINATION_SHIFT 16
+#define IXGBE_FDIRVLAN_FLEX_SHIFT 16
+#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT 15
+#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT 16
+
+#define IXGBE_FDIRCMD_CMD_MASK 0x00000003
+#define IXGBE_FDIRCMD_CMD_ADD_FLOW 0x00000001
+#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW 0x00000002
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT 0x00000003
+#define IXGBE_FDIRCMD_FILTER_VALID 0x00000004
+#define IXGBE_FDIRCMD_FILTER_UPDATE 0x00000008
+#define IXGBE_FDIRCMD_IPv6DMATCH 0x00000010
+#define IXGBE_FDIRCMD_L4TYPE_UDP 0x00000020
+#define IXGBE_FDIRCMD_L4TYPE_TCP 0x00000040
+#define IXGBE_FDIRCMD_L4TYPE_SCTP 0x00000060
+#define IXGBE_FDIRCMD_IPV6 0x00000080
+#define IXGBE_FDIRCMD_CLEARHT 0x00000100
+#define IXGBE_FDIRCMD_DROP 0x00000200
+#define IXGBE_FDIRCMD_INT 0x00000400
+#define IXGBE_FDIRCMD_LAST 0x00000800
+#define IXGBE_FDIRCMD_COLLISION 0x00001000
+#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000
+#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5
+#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16
+#define IXGBE_FDIRCMD_TUNNEL_FILTER_SHIFT 23
+#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24
+#define IXGBE_FDIR_INIT_DONE_POLL 10
+#define IXGBE_FDIRCMD_CMD_POLL 10
+#define IXGBE_FDIRCMD_TUNNEL_FILTER 0x00800000
+#define IXGBE_FDIR_DROP_QUEUE 127
+
+
+/* Manageablility Host Interface defines */
+#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */
+#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */
+#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */
+#define IXGBE_HI_FLASH_ERASE_TIMEOUT 1000 /* Process Erase command limit */
+#define IXGBE_HI_FLASH_UPDATE_TIMEOUT 5000 /* Process Update command limit */
+#define IXGBE_HI_FLASH_APPLY_TIMEOUT 0 /* Process Apply command limit */
+#define IXGBE_HI_PHY_MGMT_REQ_TIMEOUT 2000 /* Wait up to 2 seconds */
+
+/* CEM Support */
+#define FW_CEM_HDR_LEN 0x4
+#define FW_CEM_CMD_DRIVER_INFO 0xDD
+#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5
+#define FW_CEM_CMD_RESERVED 0X0
+#define FW_CEM_UNUSED_VER 0x0
+#define FW_CEM_MAX_RETRIES 3
+#define FW_CEM_RESP_STATUS_SUCCESS 0x1
+#define FW_READ_SHADOW_RAM_CMD 0x31
+#define FW_READ_SHADOW_RAM_LEN 0x6
+#define FW_WRITE_SHADOW_RAM_CMD 0x33
+#define FW_WRITE_SHADOW_RAM_LEN 0xA /* 8 plus 1 WORD to write */
+#define FW_SHADOW_RAM_DUMP_CMD 0x36
+#define FW_SHADOW_RAM_DUMP_LEN 0
+#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */
+#define FW_NVM_DATA_OFFSET 3
+#define FW_MAX_READ_BUFFER_SIZE 1024
+#define FW_DISABLE_RXEN_CMD 0xDE
+#define FW_DISABLE_RXEN_LEN 0x1
+#define FW_PHY_MGMT_REQ_CMD 0x20
+/* Host Interface Command Structures */
+
+struct ixgbe_hic_hdr {
+ u8 cmd;
+ u8 buf_len;
+ union {
+ u8 cmd_resv;
+ u8 ret_status;
+ } cmd_or_resp;
+ u8 checksum;
+};
+
+struct ixgbe_hic_hdr2_req {
+ u8 cmd;
+ u8 buf_lenh;
+ u8 buf_lenl;
+ u8 checksum;
+};
+
+struct ixgbe_hic_hdr2_rsp {
+ u8 cmd;
+ u8 buf_lenl;
+ u8 buf_lenh_status; /* 7-5: high bits of buf_len, 4-0: status */
+ u8 checksum;
+};
+
+union ixgbe_hic_hdr2 {
+ struct ixgbe_hic_hdr2_req req;
+ struct ixgbe_hic_hdr2_rsp rsp;
+};
+
+struct ixgbe_hic_drv_info {
+ struct ixgbe_hic_hdr hdr;
+ u8 port_num;
+ u8 ver_sub;
+ u8 ver_build;
+ u8 ver_min;
+ u8 ver_maj;
+ u8 pad; /* end spacing to ensure length is mult. of dword */
+ u16 pad2; /* end spacing to ensure length is mult. of dword2 */
+};
+
+/* These need to be dword aligned */
+struct ixgbe_hic_read_shadow_ram {
+ union ixgbe_hic_hdr2 hdr;
+ u32 address;
+ u16 length;
+ u16 pad2;
+ u16 data;
+ u16 pad3;
+};
+
+struct ixgbe_hic_write_shadow_ram {
+ union ixgbe_hic_hdr2 hdr;
+ u32 address;
+ u16 length;
+ u16 pad2;
+ u16 data;
+ u16 pad3;
+};
+
+struct ixgbe_hic_disable_rxen {
+ struct ixgbe_hic_hdr hdr;
+ u8 port_number;
+ u8 pad2;
+ u16 pad3;
+};
+
+
+/* Transmit Descriptor - Legacy */
+struct ixgbe_legacy_tx_desc {
+ u64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 vlan;
+ } fields;
+ } upper;
+};
+
+/* Transmit Descriptor - Advanced */
+union ixgbe_adv_tx_desc {
+ struct {
+ __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le32 cmd_type_len;
+ __le32 olinfo_status;
+ } read;
+ struct {
+ __le64 rsvd; /* Reserved */
+ __le32 nxtseq_seed;
+ __le32 status;
+ } wb;
+};
+
+/* Receive Descriptor - Legacy */
+struct ixgbe_legacy_rx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 vlan;
+};
+
+/* Receive Descriptor - Advanced */
+union ixgbe_adv_rx_desc {
+ struct {
+ __le64 pkt_addr; /* Packet buffer address */
+ __le64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ union {
+ __le32 data;
+ struct {
+ __le16 pkt_info; /* RSS, Pkt type */
+ __le16 hdr_info; /* Splithdr, hdrlen */
+ } hs_rss;
+ } lo_dword;
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length; /* Packet length */
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+/* Context descriptors */
+struct ixgbe_adv_tx_context_desc {
+ __le32 vlan_macip_lens;
+ __le32 seqnum_seed;
+ __le32 type_tucmd_mlhl;
+ __le32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */
+#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */
+#define IXGBE_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 time stamp */
+#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */
+#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */
+#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
+#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Adv Context Desc */
+#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Adv Data Descriptor */
+#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */
+#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */
+#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */
+#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */
+#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext 1=Adv */
+#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */
+#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */
+#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED pres in WB */
+#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */
+#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_CC 0x00000080 /* Check Context */
+#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */
+#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
+ IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
+ IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */
+/* 1st&Last TSO-full iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800
+#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */
+#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */
+#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /* req Markers and CRC */
+#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
+#define IXGBE_ADVTXT_TUCMD_FCOE 0x00008000 /* FCoE Frame Type */
+#define IXGBE_ADVTXD_FCOEF_EOF_MASK (0x3 << 10) /* FC EOF index */
+#define IXGBE_ADVTXD_FCOEF_SOF ((1 << 2) << 10) /* FC SOF index */
+#define IXGBE_ADVTXD_FCOEF_PARINC ((1 << 3) << 10) /* Rel_Off in F_CTL */
+#define IXGBE_ADVTXD_FCOEF_ORIE ((1 << 4) << 10) /* Orientation End */
+#define IXGBE_ADVTXD_FCOEF_ORIS ((1 << 5) << 10) /* Orientation Start */
+#define IXGBE_ADVTXD_FCOEF_EOF_N (0x0 << 10) /* 00: EOFn */
+#define IXGBE_ADVTXD_FCOEF_EOF_T (0x1 << 10) /* 01: EOFt */
+#define IXGBE_ADVTXD_FCOEF_EOF_NI (0x2 << 10) /* 10: EOFni */
+#define IXGBE_ADVTXD_FCOEF_EOF_A (0x3 << 10) /* 11: EOFa */
+#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+
+#define IXGBE_ADVTXD_OUTER_IPLEN 16 /* Adv ctxt OUTERIPLEN shift */
+#define IXGBE_ADVTXD_TUNNEL_LEN 24 /* Adv ctxt TUNNELLEN shift */
+#define IXGBE_ADVTXD_TUNNEL_TYPE_SHIFT 16 /* Adv Tx Desc Tunnel Type shift */
+#define IXGBE_ADVTXD_OUTERIPCS_SHIFT 17 /* Adv Tx Desc OUTERIPCS Shift */
+#define IXGBE_ADVTXD_TUNNEL_TYPE_NVGRE 1 /* Adv Tx Desc Tunnel Type NVGRE */
+
+/* Autonegotiation advertised speeds */
+typedef u32 ixgbe_autoneg_advertised;
+/* Link speed */
+typedef u32 ixgbe_link_speed;
+#define IXGBE_LINK_SPEED_UNKNOWN 0
+#define IXGBE_LINK_SPEED_100_FULL 0x0008
+#define IXGBE_LINK_SPEED_1GB_FULL 0x0020
+#define IXGBE_LINK_SPEED_2_5GB_FULL 0x0400
+#define IXGBE_LINK_SPEED_5GB_FULL 0x0800
+#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
+#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \
+ IXGBE_LINK_SPEED_10GB_FULL)
+#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \
+ IXGBE_LINK_SPEED_1GB_FULL | \
+ IXGBE_LINK_SPEED_10GB_FULL)
+
+/* Physical layer type */
+typedef u32 ixgbe_physical_layer;
+#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0
+#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001
+#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002
+#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004
+#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020
+#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080
+#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100
+#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200
+#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800
+#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
+#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
+#define IXGBE_PHYSICAL_LAYER_1000BASE_SX 0x4000
+
+/* Flow Control Data Sheet defined values
+ * Calculation and defines taken from 802.1bb Annex O
+ */
+
+/* BitTimes (BT) conversion */
+#define IXGBE_BT2KB(BT) ((BT + (8 * 1024 - 1)) / (8 * 1024))
+#define IXGBE_B2BT(BT) (BT * 8)
+
+/* Calculate Delay to respond to PFC */
+#define IXGBE_PFC_D 672
+
+/* Calculate Cable Delay */
+#define IXGBE_CABLE_DC 5556 /* Delay Copper */
+#define IXGBE_CABLE_DO 5000 /* Delay Optical */
+
+/* Calculate Interface Delay X540 */
+#define IXGBE_PHY_DC 25600 /* Delay 10G BASET */
+#define IXGBE_MAC_DC 8192 /* Delay Copper XAUI interface */
+#define IXGBE_XAUI_DC (2 * 2048) /* Delay Copper Phy */
+
+#define IXGBE_ID_X540 (IXGBE_MAC_DC + IXGBE_XAUI_DC + IXGBE_PHY_DC)
+
+/* Calculate Interface Delay 82598, 82599 */
+#define IXGBE_PHY_D 12800
+#define IXGBE_MAC_D 4096
+#define IXGBE_XAUI_D (2 * 1024)
+
+#define IXGBE_ID (IXGBE_MAC_D + IXGBE_XAUI_D + IXGBE_PHY_D)
+
+/* Calculate Delay incurred from higher layer */
+#define IXGBE_HD 6144
+
+/* Calculate PCI Bus delay for low thresholds */
+#define IXGBE_PCI_DELAY 10000
+
+/* Calculate X540 delay value in bit times */
+#define IXGBE_DV_X540(_max_frame_link, _max_frame_tc) \
+ ((36 * \
+ (IXGBE_B2BT(_max_frame_link) + \
+ IXGBE_PFC_D + \
+ (2 * IXGBE_CABLE_DC) + \
+ (2 * IXGBE_ID_X540) + \
+ IXGBE_HD) / 25 + 1) + \
+ 2 * IXGBE_B2BT(_max_frame_tc))
+
+/* Calculate 82599, 82598 delay value in bit times */
+#define IXGBE_DV(_max_frame_link, _max_frame_tc) \
+ ((36 * \
+ (IXGBE_B2BT(_max_frame_link) + \
+ IXGBE_PFC_D + \
+ (2 * IXGBE_CABLE_DC) + \
+ (2 * IXGBE_ID) + \
+ IXGBE_HD) / 25 + 1) + \
+ 2 * IXGBE_B2BT(_max_frame_tc))
+
+/* Calculate low threshold delay values */
+#define IXGBE_LOW_DV_X540(_max_frame_tc) \
+ (2 * IXGBE_B2BT(_max_frame_tc) + \
+ (36 * IXGBE_PCI_DELAY / 25) + 1)
+#define IXGBE_LOW_DV(_max_frame_tc) \
+ (2 * IXGBE_LOW_DV_X540(_max_frame_tc))
+
+/* Software ATR hash keys */
+#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2
+#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
+
+/* Software ATR input stream values and masks */
+#define IXGBE_ATR_HASH_MASK 0x7fff
+#define IXGBE_ATR_L4TYPE_MASK 0x3
+#define IXGBE_ATR_L4TYPE_UDP 0x1
+#define IXGBE_ATR_L4TYPE_TCP 0x2
+#define IXGBE_ATR_L4TYPE_SCTP 0x3
+#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
+#define IXGBE_ATR_L4TYPE_TUNNEL_MASK 0x10
+enum ixgbe_atr_flow_type {
+ IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0,
+ IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1,
+ IXGBE_ATR_FLOW_TYPE_TCPV4 = 0x2,
+ IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3,
+ IXGBE_ATR_FLOW_TYPE_IPV6 = 0x4,
+ IXGBE_ATR_FLOW_TYPE_UDPV6 = 0x5,
+ IXGBE_ATR_FLOW_TYPE_TCPV6 = 0x6,
+ IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV4 = 0x10,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4 = 0x11,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4 = 0x12,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4 = 0x13,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV6 = 0x14,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV6 = 0x15,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV6 = 0x16,
+ IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV6 = 0x17,
+};
+
+/* Flow Director ATR input struct. */
+union ixgbe_atr_input {
+ /*
+ * Byte layout in order, all values with MSB first:
+ *
+ * vm_pool - 1 byte
+ * flow_type - 1 byte
+ * vlan_id - 2 bytes
+ * src_ip - 16 bytes
+ * inner_mac - 6 bytes
+ * cloud_mode - 2 bytes
+ * tni_vni - 4 bytes
+ * dst_ip - 16 bytes
+ * src_port - 2 bytes
+ * dst_port - 2 bytes
+ * flex_bytes - 2 bytes
+ * bkt_hash - 2 bytes
+ */
+ struct {
+ u8 vm_pool;
+ u8 flow_type;
+ __be16 vlan_id;
+ __be32 dst_ip[4];
+ __be32 src_ip[4];
+ u8 inner_mac[6];
+ __be16 tunnel_type;
+ __be32 tni_vni;
+ __be16 src_port;
+ __be16 dst_port;
+ __be16 flex_bytes;
+ __be16 bkt_hash;
+ } formatted;
+ __be32 dword_stream[14];
+};
+
+/* Flow Director compressed ATR hash input struct */
+union ixgbe_atr_hash_dword {
+ struct {
+ u8 vm_pool;
+ u8 flow_type;
+ __be16 vlan_id;
+ } formatted;
+ __be32 ip;
+ struct {
+ __be16 src;
+ __be16 dst;
+ } port;
+ __be16 flex_bytes;
+ __be32 dword;
+};
+
+
+#define IXGBE_MVALS_INIT(m) \
+ IXGBE_CAT(EEC, m), \
+ IXGBE_CAT(FLA, m), \
+ IXGBE_CAT(GRC, m), \
+ IXGBE_CAT(SRAMREL, m), \
+ IXGBE_CAT(FACTPS, m), \
+ IXGBE_CAT(SWSM, m), \
+ IXGBE_CAT(SWFW_SYNC, m), \
+ IXGBE_CAT(FWSM, m), \
+ IXGBE_CAT(SDP0_GPIEN, m), \
+ IXGBE_CAT(SDP1_GPIEN, m), \
+ IXGBE_CAT(SDP2_GPIEN, m), \
+ IXGBE_CAT(EICR_GPI_SDP0, m), \
+ IXGBE_CAT(EICR_GPI_SDP1, m), \
+ IXGBE_CAT(EICR_GPI_SDP2, m), \
+ IXGBE_CAT(CIAA, m), \
+ IXGBE_CAT(CIAD, m), \
+ IXGBE_CAT(I2C_CLK_IN, m), \
+ IXGBE_CAT(I2C_CLK_OUT, m), \
+ IXGBE_CAT(I2C_DATA_IN, m), \
+ IXGBE_CAT(I2C_DATA_OUT, m), \
+ IXGBE_CAT(I2C_DATA_OE_N_EN, m), \
+ IXGBE_CAT(I2C_BB_EN, m), \
+ IXGBE_CAT(I2C_CLK_OE_N_EN, m), \
+ IXGBE_CAT(I2CCTL, m)
+
+enum ixgbe_mvals {
+ IXGBE_MVALS_INIT(_IDX),
+ IXGBE_MVALS_IDX_LIMIT
+};
+
+/*
+ * Unavailable: The FCoE Boot Option ROM is not present in the flash.
+ * Disabled: Present; boot order is not set for any targets on the port.
+ * Enabled: Present; boot order is set for at least one target on the port.
+ */
+enum ixgbe_fcoe_boot_status {
+ ixgbe_fcoe_bootstatus_disabled = 0,
+ ixgbe_fcoe_bootstatus_enabled = 1,
+ ixgbe_fcoe_bootstatus_unavailable = 0xFFFF
+};
+
+enum ixgbe_eeprom_type {
+ ixgbe_eeprom_uninitialized = 0,
+ ixgbe_eeprom_spi,
+ ixgbe_flash,
+ ixgbe_eeprom_none /* No NVM support */
+};
+
+enum ixgbe_mac_type {
+ ixgbe_mac_unknown = 0,
+ ixgbe_mac_82598EB,
+ ixgbe_mac_82599EB,
+ ixgbe_mac_82599_vf,
+ ixgbe_mac_X540,
+ ixgbe_mac_X540_vf,
+ ixgbe_mac_X550,
+ ixgbe_mac_X550EM_x,
+ ixgbe_mac_X550_vf,
+ ixgbe_mac_X550EM_x_vf,
+ ixgbe_num_macs
+};
+
+enum ixgbe_phy_type {
+ ixgbe_phy_unknown = 0,
+ ixgbe_phy_none,
+ ixgbe_phy_tn,
+ ixgbe_phy_aq,
+ ixgbe_phy_x550em_kr,
+ ixgbe_phy_x550em_kx4,
+ ixgbe_phy_x550em_ext_t,
+ ixgbe_phy_cu_unknown,
+ ixgbe_phy_qt,
+ ixgbe_phy_xaui,
+ ixgbe_phy_nl,
+ ixgbe_phy_sfp_passive_tyco,
+ ixgbe_phy_sfp_passive_unknown,
+ ixgbe_phy_sfp_active_unknown,
+ ixgbe_phy_sfp_avago,
+ ixgbe_phy_sfp_ftl,
+ ixgbe_phy_sfp_ftl_active,
+ ixgbe_phy_sfp_unknown,
+ ixgbe_phy_sfp_intel,
+ ixgbe_phy_qsfp_passive_unknown,
+ ixgbe_phy_qsfp_active_unknown,
+ ixgbe_phy_qsfp_intel,
+ ixgbe_phy_qsfp_unknown,
+ ixgbe_phy_sfp_unsupported, /*Enforce bit set with unsupported module*/
+ ixgbe_phy_generic
+};
+
+/*
+ * SFP+ module type IDs:
+ *
+ * ID Module Type
+ * =============
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CU_CORE0 - 82599-specific
+ * 4 SFP_DA_CU_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
+ */
+enum ixgbe_sfp_type {
+ ixgbe_sfp_type_da_cu = 0,
+ ixgbe_sfp_type_sr = 1,
+ ixgbe_sfp_type_lr = 2,
+ ixgbe_sfp_type_da_cu_core0 = 3,
+ ixgbe_sfp_type_da_cu_core1 = 4,
+ ixgbe_sfp_type_srlr_core0 = 5,
+ ixgbe_sfp_type_srlr_core1 = 6,
+ ixgbe_sfp_type_da_act_lmt_core0 = 7,
+ ixgbe_sfp_type_da_act_lmt_core1 = 8,
+ ixgbe_sfp_type_1g_cu_core0 = 9,
+ ixgbe_sfp_type_1g_cu_core1 = 10,
+ ixgbe_sfp_type_1g_sx_core0 = 11,
+ ixgbe_sfp_type_1g_sx_core1 = 12,
+ ixgbe_sfp_type_1g_lx_core0 = 13,
+ ixgbe_sfp_type_1g_lx_core1 = 14,
+ ixgbe_sfp_type_not_present = 0xFFFE,
+ ixgbe_sfp_type_unknown = 0xFFFF
+};
+
+enum ixgbe_media_type {
+ ixgbe_media_type_unknown = 0,
+ ixgbe_media_type_fiber,
+ ixgbe_media_type_fiber_qsfp,
+ ixgbe_media_type_fiber_lco,
+ ixgbe_media_type_copper,
+ ixgbe_media_type_backplane,
+ ixgbe_media_type_cx4,
+ ixgbe_media_type_virtual
+};
+
+/* Flow Control Settings */
+enum ixgbe_fc_mode {
+ ixgbe_fc_none = 0,
+ ixgbe_fc_rx_pause,
+ ixgbe_fc_tx_pause,
+ ixgbe_fc_full,
+ ixgbe_fc_default
+};
+
+/* Smart Speed Settings */
+#define IXGBE_SMARTSPEED_MAX_RETRIES 3
+enum ixgbe_smart_speed {
+ ixgbe_smart_speed_auto = 0,
+ ixgbe_smart_speed_on,
+ ixgbe_smart_speed_off
+};
+
+/* PCI bus types */
+enum ixgbe_bus_type {
+ ixgbe_bus_type_unknown = 0,
+ ixgbe_bus_type_pci,
+ ixgbe_bus_type_pcix,
+ ixgbe_bus_type_pci_express,
+ ixgbe_bus_type_internal,
+ ixgbe_bus_type_reserved
+};
+
+/* PCI bus speeds */
+enum ixgbe_bus_speed {
+ ixgbe_bus_speed_unknown = 0,
+ ixgbe_bus_speed_33 = 33,
+ ixgbe_bus_speed_66 = 66,
+ ixgbe_bus_speed_100 = 100,
+ ixgbe_bus_speed_120 = 120,
+ ixgbe_bus_speed_133 = 133,
+ ixgbe_bus_speed_2500 = 2500,
+ ixgbe_bus_speed_5000 = 5000,
+ ixgbe_bus_speed_8000 = 8000,
+ ixgbe_bus_speed_reserved
+};
+
+/* PCI bus widths */
+enum ixgbe_bus_width {
+ ixgbe_bus_width_unknown = 0,
+ ixgbe_bus_width_pcie_x1 = 1,
+ ixgbe_bus_width_pcie_x2 = 2,
+ ixgbe_bus_width_pcie_x4 = 4,
+ ixgbe_bus_width_pcie_x8 = 8,
+ ixgbe_bus_width_32 = 32,
+ ixgbe_bus_width_64 = 64,
+ ixgbe_bus_width_reserved
+};
+
+struct ixgbe_addr_filter_info {
+ u32 num_mc_addrs;
+ u32 rar_used_count;
+ u32 mta_in_use;
+ u32 overflow_promisc;
+ bool user_set_promisc;
+};
+
+/* Bus parameters */
+struct ixgbe_bus_info {
+ enum ixgbe_bus_speed speed;
+ enum ixgbe_bus_width width;
+ enum ixgbe_bus_type type;
+
+ u16 func;
+ u16 lan_id;
+};
+
+/* Flow control parameters */
+struct ixgbe_fc_info {
+ u32 high_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl High-water */
+ u32 low_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl Low-water */
+ u16 pause_time; /* Flow Control Pause timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ bool disable_fc_autoneg; /* Do not autonegotiate FC */
+ bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
+ enum ixgbe_fc_mode current_mode; /* FC mode in effect */
+ enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */
+};
+
+/* Statistics counters collected by the MAC */
+struct ixgbe_hw_stats {
+ u64 crcerrs;
+ u64 illerrc;
+ u64 errbc;
+ u64 mspdc;
+ u64 mpctotal;
+ u64 mpc[8];
+ u64 mlfc;
+ u64 mrfc;
+ u64 rlec;
+ u64 lxontxc;
+ u64 lxonrxc;
+ u64 lxofftxc;
+ u64 lxoffrxc;
+ u64 pxontxc[8];
+ u64 pxonrxc[8];
+ u64 pxofftxc[8];
+ u64 pxoffrxc[8];
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 rnbc[8];
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rjc;
+ u64 mngprc;
+ u64 mngpdc;
+ u64 mngptc;
+ u64 tor;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 xec;
+ u64 qprc[16];
+ u64 qptc[16];
+ u64 qbrc[16];
+ u64 qbtc[16];
+ u64 qprdc[16];
+ u64 pxon2offc[8];
+ u64 fdirustat_add;
+ u64 fdirustat_remove;
+ u64 fdirfstat_fadd;
+ u64 fdirfstat_fremove;
+ u64 fdirmatch;
+ u64 fdirmiss;
+ u64 fccrc;
+ u64 fclast;
+ u64 fcoerpdc;
+ u64 fcoeprc;
+ u64 fcoeptc;
+ u64 fcoedwrc;
+ u64 fcoedwtc;
+ u64 fcoe_noddp;
+ u64 fcoe_noddp_ext_buff;
+ u64 ldpcec;
+ u64 pcrc8ec;
+ u64 b2ospc;
+ u64 b2ogprc;
+ u64 o2bgptc;
+ u64 o2bspc;
+};
+
+/* forward declaration */
+struct ixgbe_hw;
+
+/* iterator type for walking multicast address lists */
+typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
+ u32 *vmdq);
+
+/* Function pointer table */
+struct ixgbe_eeprom_operations {
+ s32 (*init_params)(struct ixgbe_hw *);
+ s32 (*read)(struct ixgbe_hw *, u16, u16 *);
+ s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+ s32 (*write)(struct ixgbe_hw *, u16, u16);
+ s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+ s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
+ s32 (*update_checksum)(struct ixgbe_hw *);
+ s32 (*calc_checksum)(struct ixgbe_hw *);
+};
+
+struct ixgbe_mac_operations {
+ s32 (*init_hw)(struct ixgbe_hw *);
+ s32 (*reset_hw)(struct ixgbe_hw *);
+ s32 (*start_hw)(struct ixgbe_hw *);
+ s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
+ void (*enable_relaxed_ordering)(struct ixgbe_hw *);
+ enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
+ u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
+ s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+ s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
+ s32 (*set_san_mac_addr)(struct ixgbe_hw *, u8 *);
+ s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
+ s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *);
+ s32 (*get_fcoe_boot_status)(struct ixgbe_hw *, u16 *);
+ s32 (*stop_adapter)(struct ixgbe_hw *);
+ s32 (*get_bus_info)(struct ixgbe_hw *);
+ void (*set_lan_id)(struct ixgbe_hw *);
+ s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*);
+ s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8);
+ s32 (*setup_sfp)(struct ixgbe_hw *);
+ s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
+ s32 (*disable_sec_rx_path)(struct ixgbe_hw *);
+ s32 (*enable_sec_rx_path)(struct ixgbe_hw *);
+ s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u32);
+ void (*release_swfw_sync)(struct ixgbe_hw *, u32);
+ s32 (*prot_autoc_read)(struct ixgbe_hw *, bool *, u32 *);
+ s32 (*prot_autoc_write)(struct ixgbe_hw *, u32, bool);
+
+ /* Link */
+ void (*disable_tx_laser)(struct ixgbe_hw *);
+ void (*enable_tx_laser)(struct ixgbe_hw *);
+ void (*flap_tx_laser)(struct ixgbe_hw *);
+ s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+ s32 (*setup_mac_link)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+ s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
+ s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
+ bool *);
+ void (*set_rate_select_speed)(struct ixgbe_hw *, ixgbe_link_speed);
+
+ /* Packet Buffer manipulation */
+ void (*setup_rxpba)(struct ixgbe_hw *, int, u32, int);
+
+ /* LED */
+ s32 (*led_on)(struct ixgbe_hw *, u32);
+ s32 (*led_off)(struct ixgbe_hw *, u32);
+ s32 (*blink_led_start)(struct ixgbe_hw *, u32);
+ s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+
+ /* RAR, Multicast, VLAN */
+ s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
+ s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *);
+ s32 (*clear_rar)(struct ixgbe_hw *, u32);
+ s32 (*insert_mac_addr)(struct ixgbe_hw *, u8 *, u32);
+ s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
+ s32 (*set_vmdq_san_mac)(struct ixgbe_hw *, u32);
+ s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
+ s32 (*init_rx_addrs)(struct ixgbe_hw *);
+ s32 (*update_uc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+ ixgbe_mc_addr_itr);
+ s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+ ixgbe_mc_addr_itr, bool clear);
+ s32 (*enable_mc)(struct ixgbe_hw *);
+ s32 (*disable_mc)(struct ixgbe_hw *);
+ s32 (*clear_vfta)(struct ixgbe_hw *);
+ s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+ s32 (*set_vlvf)(struct ixgbe_hw *, u32, u32, bool, bool *);
+ s32 (*init_uta_tables)(struct ixgbe_hw *);
+ void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
+ void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
+
+ /* Flow Control */
+ s32 (*fc_enable)(struct ixgbe_hw *);
+ s32 (*setup_fc)(struct ixgbe_hw *);
+
+ /* Manageability interface */
+ s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+ s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
+ s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
+ void (*get_rtrup2tc)(struct ixgbe_hw *hw, u8 *map);
+ void (*disable_rx)(struct ixgbe_hw *hw);
+ void (*enable_rx)(struct ixgbe_hw *hw);
+ void (*set_source_address_pruning)(struct ixgbe_hw *, bool,
+ unsigned int);
+ void (*set_ethertype_anti_spoofing)(struct ixgbe_hw *, bool, int);
+ s32 (*dmac_update_tcs)(struct ixgbe_hw *hw);
+ s32 (*dmac_config_tcs)(struct ixgbe_hw *hw);
+ s32 (*dmac_config)(struct ixgbe_hw *hw);
+ s32 (*setup_eee)(struct ixgbe_hw *hw, bool enable_eee);
+ s32 (*read_iosf_sb_reg)(struct ixgbe_hw *, u32, u32, u32 *);
+ s32 (*write_iosf_sb_reg)(struct ixgbe_hw *, u32, u32, u32);
+ void (*disable_mdd)(struct ixgbe_hw *hw);
+ void (*enable_mdd)(struct ixgbe_hw *hw);
+ void (*mdd_event)(struct ixgbe_hw *hw, u32 *vf_bitmap);
+ void (*restore_mdd_vf)(struct ixgbe_hw *hw, u32 vf);
+};
+
+struct ixgbe_phy_operations {
+ s32 (*identify)(struct ixgbe_hw *);
+ s32 (*identify_sfp)(struct ixgbe_hw *);
+ s32 (*init)(struct ixgbe_hw *);
+ s32 (*reset)(struct ixgbe_hw *);
+ s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
+ s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
+ s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *);
+ s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16);
+ s32 (*setup_link)(struct ixgbe_hw *);
+ s32 (*setup_internal_link)(struct ixgbe_hw *);
+ s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+ s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *);
+ s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *);
+ s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *);
+ s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8);
+ s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *);
+ s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
+ s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
+ void (*i2c_bus_clear)(struct ixgbe_hw *);
+ s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
+ s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
+ s32 (*check_overtemp)(struct ixgbe_hw *);
+ s32 (*set_phy_power)(struct ixgbe_hw *, bool on);
+ s32 (*enter_lplu)(struct ixgbe_hw *);
+ s32 (*handle_lasi)(struct ixgbe_hw *hw);
+ s32 (*read_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+ u16 *value);
+ s32 (*write_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+ u16 value);
+ s32 (*read_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+ u8 *value);
+ s32 (*write_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+ u8 value);
+};
+
+struct ixgbe_eeprom_info {
+ struct ixgbe_eeprom_operations ops;
+ enum ixgbe_eeprom_type type;
+ u32 semaphore_delay;
+ u16 word_size;
+ u16 address_bits;
+ u16 word_page_size;
+ u16 ctrl_word_3;
+};
+
+#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01
+struct ixgbe_mac_info {
+ struct ixgbe_mac_operations ops;
+ enum ixgbe_mac_type type;
+ u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ /* prefix for World Wide Node Name (WWNN) */
+ u16 wwnn_prefix;
+ /* prefix for World Wide Port Name (WWPN) */
+ u16 wwpn_prefix;
+#define IXGBE_MAX_MTA 128
+ u32 mta_shadow[IXGBE_MAX_MTA];
+ s32 mc_filter_type;
+ u32 mcft_size;
+ u32 vft_size;
+ u32 num_rar_entries;
+ u32 rar_highwater;
+ u32 rx_pb_size;
+ u32 max_tx_queues;
+ u32 max_rx_queues;
+ u32 orig_autoc;
+ u8 san_mac_rar_index;
+ bool get_link_status;
+ u32 orig_autoc2;
+ u16 max_msix_vectors;
+ bool arc_subsystem_valid;
+ bool orig_link_settings_stored;
+ bool autotry_restart;
+ u8 flags;
+ struct ixgbe_thermal_sensor_data thermal_sensor_data;
+ bool thermal_sensor_enabled;
+ struct ixgbe_dmac_config dmac_config;
+ bool set_lben;
+ u32 max_link_up_time;
+};
+
+struct ixgbe_phy_info {
+ struct ixgbe_phy_operations ops;
+ enum ixgbe_phy_type type;
+ u32 addr;
+ u32 id;
+ enum ixgbe_sfp_type sfp_type;
+ bool sfp_setup_needed;
+ u32 revision;
+ enum ixgbe_media_type media_type;
+ u32 phy_semaphore_mask;
+ bool reset_disable;
+ ixgbe_autoneg_advertised autoneg_advertised;
+ enum ixgbe_smart_speed smart_speed;
+ bool smart_speed_active;
+ bool multispeed_fiber;
+ bool reset_if_overtemp;
+ bool qsfp_shared_i2c_bus;
+ u32 nw_mng_if_sel;
+};
+
+#include "ixgbe_mbx.h"
+
+struct ixgbe_mbx_operations {
+ void (*init_params)(struct ixgbe_hw *hw);
+ s32 (*read)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*check_for_msg)(struct ixgbe_hw *, u16);
+ s32 (*check_for_ack)(struct ixgbe_hw *, u16);
+ s32 (*check_for_rst)(struct ixgbe_hw *, u16);
+};
+
+struct ixgbe_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct ixgbe_mbx_info {
+ struct ixgbe_mbx_operations ops;
+ struct ixgbe_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u32 v2p_mailbox;
+ u16 size;
+};
+
+struct ixgbe_hw {
+ u8 IOMEM *hw_addr;
+ void *back;
+ struct ixgbe_mac_info mac;
+ struct ixgbe_addr_filter_info addr_ctrl;
+ struct ixgbe_fc_info fc;
+ struct ixgbe_phy_info phy;
+ struct ixgbe_eeprom_info eeprom;
+ struct ixgbe_bus_info bus;
+ struct ixgbe_mbx_info mbx;
+ const u32 *mvals;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_device_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ bool adapter_stopped;
+ int api_version;
+ bool force_full_reset;
+ bool allow_unsupported_sfp;
+ bool wol_enabled;
+};
+
+#define ixgbe_call_func(hw, func, params, error) \
+ (func != NULL) ? func params : error
+
+
+/* Error Codes */
+#define IXGBE_SUCCESS 0
+#define IXGBE_ERR_EEPROM -1
+#define IXGBE_ERR_EEPROM_CHECKSUM -2
+#define IXGBE_ERR_PHY -3
+#define IXGBE_ERR_CONFIG -4
+#define IXGBE_ERR_PARAM -5
+#define IXGBE_ERR_MAC_TYPE -6
+#define IXGBE_ERR_UNKNOWN_PHY -7
+#define IXGBE_ERR_LINK_SETUP -8
+#define IXGBE_ERR_ADAPTER_STOPPED -9
+#define IXGBE_ERR_INVALID_MAC_ADDR -10
+#define IXGBE_ERR_DEVICE_NOT_SUPPORTED -11
+#define IXGBE_ERR_MASTER_REQUESTS_PENDING -12
+#define IXGBE_ERR_INVALID_LINK_SETTINGS -13
+#define IXGBE_ERR_AUTONEG_NOT_COMPLETE -14
+#define IXGBE_ERR_RESET_FAILED -15
+#define IXGBE_ERR_SWFW_SYNC -16
+#define IXGBE_ERR_PHY_ADDR_INVALID -17
+#define IXGBE_ERR_I2C -18
+#define IXGBE_ERR_SFP_NOT_SUPPORTED -19
+#define IXGBE_ERR_SFP_NOT_PRESENT -20
+#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21
+#define IXGBE_ERR_NO_SAN_ADDR_PTR -22
+#define IXGBE_ERR_FDIR_REINIT_FAILED -23
+#define IXGBE_ERR_EEPROM_VERSION -24
+#define IXGBE_ERR_NO_SPACE -25
+#define IXGBE_ERR_OVERTEMP -26
+#define IXGBE_ERR_FC_NOT_NEGOTIATED -27
+#define IXGBE_ERR_FC_NOT_SUPPORTED -28
+#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30
+#define IXGBE_ERR_PBA_SECTION -31
+#define IXGBE_ERR_INVALID_ARGUMENT -32
+#define IXGBE_ERR_HOST_INTERFACE_COMMAND -33
+#define IXGBE_ERR_OUT_OF_MEM -34
+#define IXGBE_ERR_FEATURE_NOT_SUPPORTED -36
+#define IXGBE_ERR_EEPROM_PROTECTED_REGION -37
+#define IXGBE_ERR_FDIR_CMD_INCOMPLETE -38
+
+#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
+
+
+#define IXGBE_FUSES0_GROUP(_i) (0x11158 + ((_i) * 4))
+#define IXGBE_FUSES0_300MHZ (1 << 5)
+#define IXGBE_FUSES0_REV1 (1 << 6)
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010)
+#define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C)
+#define IXGBE_KRM_AN_CNTL_1(P) ((P) ? 0x822C : 0x422C)
+#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P) ? 0x8634 : 0x4634)
+#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P) ? 0x8638 : 0x4638)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P) ? 0x8B00 : 0x4B00)
+#define IXGBE_KRM_PMD_DFX_BURNIN(P) ((P) ? 0x8E00 : 0x4E00)
+#define IXGBE_KRM_TX_COEFF_CTRL_1(P) ((P) ? 0x9520 : 0x5520)
+#define IXGBE_KRM_RX_ANA_CTL(P) ((P) ? 0x9A00 : 0x5A00)
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B (1 << 9)
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS (1 << 11)
+
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK (0x7 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G (2 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G (4 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ (1 << 14)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC (1 << 15)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX (1 << 16)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR (1 << 18)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX (1 << 24)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR (1 << 26)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE (1 << 29)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART (1 << 31)
+
+#define IXGBE_KRM_AN_CNTL_1_SYM_PAUSE (1 << 28)
+#define IXGBE_KRM_AN_CNTL_1_ASM_PAUSE (1 << 29)
+
+#define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN (1 << 6)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN (1 << 15)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN (1 << 16)
+
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL (1 << 4)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS (1 << 2)
+
+#define IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK (0x3 << 16)
+
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN (1 << 1)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN (1 << 2)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN (1 << 3)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN (1 << 31)
+
+#define IXGBE_KX4_LINK_CNTL_1 0x4C
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX (1 << 16)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 (1 << 17)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX (1 << 24)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX4 (1 << 25)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE (1 << 29)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_FORCE_LINK_UP (1 << 30)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART (1 << 31)
+
+#define IXGBE_SB_IOSF_INDIRECT_CTRL 0x00011144
+#define IXGBE_SB_IOSF_INDIRECT_DATA 0x00011148
+
+#define IXGBE_SB_IOSF_CTRL_ADDR_SHIFT 0
+#define IXGBE_SB_IOSF_CTRL_ADDR_MASK 0xFF
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT 18
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK \
+ (0x3 << IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT 20
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK \
+ (0xFF << IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT 28
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_MASK 0x7
+#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT 31
+#define IXGBE_SB_IOSF_CTRL_BUSY (1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
+#define IXGBE_SB_IOSF_TARGET_KR_PHY 0
+#define IXGBE_SB_IOSF_TARGET_KX4_PHY 1
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS 2
+
+#define IXGBE_NW_MNG_IF_SEL 0x00011178
+#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24)
+
+#endif /* _IXGBE_TYPE_H_ */
new file mode 100644
@@ -0,0 +1,723 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_api.h"
+#include "ixgbe_type.h"
+#include "ixgbe_vf.h"
+
+#ifndef IXGBE_VFWRITE_REG
+#define IXGBE_VFWRITE_REG IXGBE_WRITE_REG
+#endif
+#ifndef IXGBE_VFREAD_REG
+#define IXGBE_VFREAD_REG IXGBE_READ_REG
+#endif
+
+/**
+ * ixgbe_init_ops_vf - Initialize the pointers for vf
+ * @hw: pointer to hardware structure
+ *
+ * This will assign function pointers, adapter-specific functions can
+ * override the assignment of generic function pointers by assigning
+ * their own adapter-specific function pointers.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw)
+{
+ /* MAC */
+ hw->mac.ops.init_hw = ixgbe_init_hw_vf;
+ hw->mac.ops.reset_hw = ixgbe_reset_hw_vf;
+ hw->mac.ops.start_hw = ixgbe_start_hw_vf;
+ /* Cannot clear stats on VF */
+ hw->mac.ops.clear_hw_cntrs = NULL;
+ hw->mac.ops.get_media_type = NULL;
+ hw->mac.ops.get_mac_addr = ixgbe_get_mac_addr_vf;
+ hw->mac.ops.stop_adapter = ixgbe_stop_adapter_vf;
+ hw->mac.ops.get_bus_info = NULL;
+
+ /* Link */
+ hw->mac.ops.setup_link = ixgbe_setup_mac_link_vf;
+ hw->mac.ops.check_link = ixgbe_check_mac_link_vf;
+ hw->mac.ops.get_link_capabilities = NULL;
+
+ /* RAR, Multicast, VLAN */
+ hw->mac.ops.set_rar = ixgbe_set_rar_vf;
+ hw->mac.ops.set_uc_addr = ixgbevf_set_uc_addr_vf;
+ hw->mac.ops.init_rx_addrs = NULL;
+ hw->mac.ops.update_mc_addr_list = ixgbe_update_mc_addr_list_vf;
+ hw->mac.ops.enable_mc = NULL;
+ hw->mac.ops.disable_mc = NULL;
+ hw->mac.ops.clear_vfta = NULL;
+ hw->mac.ops.set_vfta = ixgbe_set_vfta_vf;
+
+ hw->mac.max_tx_queues = 1;
+ hw->mac.max_rx_queues = 1;
+
+ hw->mbx.ops.init_params = ixgbe_init_mbx_params_vf;
+
+ return IXGBE_SUCCESS;
+}
+
+/* ixgbe_virt_clr_reg - Set register to default (power on) state.
+ * @hw: pointer to hardware structure
+ */
+static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw)
+{
+ int i;
+ u32 vfsrrctl;
+ u32 vfdca_rxctrl;
+ u32 vfdca_txctrl;
+
+ /* VRSRRCTL default values (BSIZEPACKET = 2048, BSIZEHEADER = 256) */
+ vfsrrctl = 0x100 << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ vfsrrctl |= 0x800 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+
+ /* DCA_RXCTRL default value */
+ vfdca_rxctrl = IXGBE_DCA_RXCTRL_DESC_RRO_EN |
+ IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
+
+ /* DCA_TXCTRL default value */
+ vfdca_txctrl = IXGBE_DCA_TXCTRL_DESC_RRO_EN |
+ IXGBE_DCA_TXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_TXCTRL_DATA_RRO_EN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+
+ for (i = 0; i < 7; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDH(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDT(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(i), vfsrrctl);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDH(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDT(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAH(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFDCA_RXCTRL(i), vfdca_rxctrl);
+ IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(i), vfdca_txctrl);
+ }
+
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_start_hw_vf - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw)
+{
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_hw_vf - virtual function hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware and then starting
+ * the hardware
+ **/
+s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw)
+{
+ s32 status = hw->mac.ops.start_hw(hw);
+
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_vf - Performs hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by reseting the transmit and receive units, masks and
+ * clears all interrupts.
+ **/
+s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 timeout = IXGBE_VF_INIT_TIMEOUT;
+ s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
+ u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ DEBUGFUNC("ixgbevf_reset_hw_vf");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ /* reset the api version */
+ hw->api_version = ixgbe_mbox_api_10;
+
+ DEBUGOUT("Issuing a function level reset to MAC\n");
+
+ IXGBE_VFWRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
+ IXGBE_WRITE_FLUSH(hw);
+
+ msec_delay(50);
+
+ /* we cannot reset while the RSTI / RSTD bits are asserted */
+ while (!mbx->ops.check_for_rst(hw, 0) && timeout) {
+ timeout--;
+ usec_delay(5);
+ }
+
+ if (!timeout)
+ return IXGBE_ERR_RESET_FAILED;
+
+ /* Reset VF registers to initial values */
+ ixgbe_virt_clr_reg(hw);
+
+ /* mailbox timeout can now become active */
+ mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
+
+ msgbuf[0] = IXGBE_VF_RESET;
+ mbx->ops.write_posted(hw, msgbuf, 1, 0);
+
+ msec_delay(10);
+
+ /*
+ * set our "perm_addr" based on info provided by PF
+ * also set up the mc_filter_type which is piggy backed
+ * on the mac address in word 3
+ */
+ ret_val = mbx->ops.read_posted(hw, msgbuf,
+ IXGBE_VF_PERMADDR_MSG_LEN, 0);
+ if (ret_val)
+ return ret_val;
+
+ if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK) &&
+ msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_NACK))
+ return IXGBE_ERR_INVALID_MAC_ADDR;
+
+ memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+ hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_stop_adapter_vf - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw)
+{
+ u32 reg_val;
+ u16 i;
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Clear interrupt mask to stop from interrupts being generated */
+ IXGBE_VFWRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
+
+ /* Clear any pending interrupts, flush previous writes */
+ IXGBE_VFREAD_REG(hw, IXGBE_VTEICR);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ for (i = 0; i < hw->mac.max_tx_queues; i++)
+ IXGBE_VFWRITE_REG(hw, IXGBE_VFTXDCTL(i), IXGBE_TXDCTL_SWFLSH);
+
+ /* Disable the receive unit by stopping each queue */
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ reg_val = IXGBE_VFREAD_REG(hw, IXGBE_VFRXDCTL(i));
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ IXGBE_VFWRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
+ }
+ /* Clear packet split and pool config */
+ IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+
+ /* flush all queues disables */
+ IXGBE_WRITE_FLUSH(hw);
+ msec_delay(2);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
+ *
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
+ **/
+STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector = 0;
+
+ switch (hw->mac.mc_filter_type) {
+ case 0: /* use bits [47:36] of the address */
+ vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ break;
+ case 1: /* use bits [46:35] of the address */
+ vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ break;
+ case 2: /* use bits [45:34] of the address */
+ vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ break;
+ case 3: /* use bits [43:32] of the address */
+ vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ break;
+ default: /* Invalid mc_filter_type */
+ DEBUGOUT("MC filter type param set incorrectly\n");
+ ASSERT(0);
+ break;
+ }
+
+ /* vector can only be 12-bits or boundary will be exceeded */
+ vector &= 0xFFF;
+ return vector;
+}
+
+STATIC void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw,
+ u32 *msg, u16 size)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 retmsg[IXGBE_VFMAILBOX_SIZE];
+ s32 retval = mbx->ops.write_posted(hw, msg, size, 0);
+
+ if (!retval)
+ mbx->ops.read_posted(hw, retmsg, size, 0);
+}
+
+/**
+ * ixgbe_set_rar_vf - set device MAC address
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
+ **/
+s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+ UNREFERENCED_3PARAMETER(vmdq, enable_addr, index);
+
+ memset(msgbuf, 0, 12);
+ msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* if nacked the address was rejected, use "perm_addr" */
+ if (!ret_val &&
+ (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
+ ixgbe_get_mac_addr_vf(hw, hw->mac.addr);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ * @next: caller supplied function to return next address in list
+ *
+ * Updates the Multicast Table Array.
+ **/
+s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, ixgbe_mc_addr_itr next,
+ bool clear)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+ u16 *vector_list = (u16 *)&msgbuf[1];
+ u32 vector;
+ u32 cnt, i;
+ u32 vmdq;
+
+ UNREFERENCED_1PARAMETER(clear);
+
+ DEBUGFUNC("ixgbe_update_mc_addr_list_vf");
+
+ /* Each entry in the list uses 1 16 bit word. We have 30
+ * 16 bit words available in our HW msg buffer (minus 1 for the
+ * msg type). That's 30 hash values if we pack 'em right. If
+ * there are more than 30 MC addresses to add then punt the
+ * extras for now and then add code to handle more than 30 later.
+ * It would be unusual for a server to request that many multi-cast
+ * addresses except for in large enterprise network environments.
+ */
+
+ DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count);
+
+ cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
+ msgbuf[0] = IXGBE_VF_SET_MULTICAST;
+ msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
+
+ for (i = 0; i < cnt; i++) {
+ vector = ixgbe_mta_vector(hw, next(hw, &mc_addr_list, &vmdq));
+ DEBUGOUT1("Hash value = 0x%03X\n", vector);
+ vector_list[i] = (u16)vector;
+ }
+
+ return mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE, 0);
+}
+
+/**
+ * ixgbe_set_vfta_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vlan: 12 bit VLAN ID
+ * @vind: unused by VF drivers
+ * @vlan_on: if true then set bit, else clear bit
+ **/
+s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+ s32 ret_val;
+ UNREFERENCED_1PARAMETER(vind);
+
+ msgbuf[0] = IXGBE_VF_SET_VLAN;
+ msgbuf[1] = vlan;
+ /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+ msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
+
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 2, 0);
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 1, 0);
+
+ if (!ret_val && (msgbuf[0] & IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_SUCCESS;
+
+ return ret_val | (msgbuf[0] & IXGBE_VT_MSGTYPE_NACK);
+}
+
+/**
+ * ixgbe_get_num_of_tx_queues_vf - Get number of TX queues
+ * @hw: pointer to hardware structure
+ *
+ * Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ return IXGBE_VF_MAX_TX_QUEUES;
+}
+
+/**
+ * ixgbe_get_num_of_rx_queues_vf - Get number of RX queues
+ * @hw: pointer to hardware structure
+ *
+ * Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ return IXGBE_VF_MAX_RX_QUEUES;
+}
+
+/**
+ * ixgbe_get_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_ETH_LENGTH_OF_ADDRESS; i++)
+ mac_addr[i] = hw->mac.perm_addr[i];
+
+ return IXGBE_SUCCESS;
+}
+
+s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, sizeof(msgbuf));
+ /*
+ * If index is one then this is the start of a new list and needs
+ * indication to the PF so it can do it's own list management.
+ * If it is zero then that tells the PF to just clear all of
+ * this VF's macvlans and there is no new list.
+ */
+ msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
+ msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
+ if (addr)
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ if (!ret_val)
+ if (msgbuf[0] == (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
+ ret_val = IXGBE_ERR_OUT_OF_MEM;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_setup_mac_link_vf - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ UNREFERENCED_3PARAMETER(hw, speed, autoneg_wait_to_complete);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_check_mac_link_vf - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool autoneg_wait_to_complete)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ struct ixgbe_mac_info *mac = &hw->mac;
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 links_reg;
+ u32 in_msg = 0;
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+ /* If we were hit with a reset drop the link */
+ if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout)
+ mac->get_link_status = true;
+
+ if (!mac->get_link_status)
+ goto out;
+
+ /* if link status is down no point in checking to see if pf is up */
+ links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+ if (!(links_reg & IXGBE_LINKS_UP))
+ goto out;
+
+ /* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
+ * before the link status is correct
+ */
+ if (mac->type == ixgbe_mac_82599_vf) {
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ usec_delay(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+ if (!(links_reg & IXGBE_LINKS_UP))
+ goto out;
+ }
+ }
+
+ switch (links_reg & IXGBE_LINKS_SPEED_82599) {
+ case IXGBE_LINKS_SPEED_10G_82599:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ break;
+ case IXGBE_LINKS_SPEED_1G_82599:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ case IXGBE_LINKS_SPEED_100_82599:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ break;
+ }
+
+ /* if the read failed it could just be a mailbox collision, best wait
+ * until we are called again and don't report an error
+ */
+ if (mbx->ops.read(hw, &in_msg, 1, 0))
+ goto out;
+
+ if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
+ /* msg is not CTS and is NACK we must have lost CTS status */
+ if (in_msg & IXGBE_VT_MSGTYPE_NACK)
+ ret_val = -1;
+ goto out;
+ }
+
+ /* the pf is talking, if we timed out in the past we reinit */
+ if (!mbx->timeout) {
+ ret_val = -1;
+ goto out;
+ }
+
+ /* if we passed all the tests above then the link is up and we no
+ * longer need to check for link
+ */
+ mac->get_link_status = false;
+
+out:
+ *link_up = !mac->get_link_status;
+ return ret_val;
+}
+
+/**
+ * ixgbevf_rlpml_set_vf - Set the maximum receive packet length
+ * @hw: pointer to the HW structure
+ * @max_size: value to assign to max frame size
+ **/
+void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
+{
+ u32 msgbuf[2];
+
+ msgbuf[0] = IXGBE_VF_SET_LPE;
+ msgbuf[1] = max_size;
+ ixgbevf_write_msg_read_ack(hw, msgbuf, 2);
+}
+
+/**
+ * ixgbevf_negotiate_api_version - Negotiate supported API version
+ * @hw: pointer to the HW structure
+ * @api: integer containing requested API version
+ **/
+int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api)
+{
+ int err;
+ u32 msg[3];
+
+ /* Negotiate the mailbox API version */
+ msg[0] = IXGBE_VF_API_NEGOTIATE;
+ msg[1] = api;
+ msg[2] = 0;
+ err = hw->mbx.ops.write_posted(hw, msg, 3, 0);
+
+ if (!err)
+ err = hw->mbx.ops.read_posted(hw, msg, 3, 0);
+
+ if (!err) {
+ msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* Store value and return 0 on success */
+ if (msg[0] == (IXGBE_VF_API_NEGOTIATE | IXGBE_VT_MSGTYPE_ACK)) {
+ hw->api_version = api;
+ return 0;
+ }
+
+ err = IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ return err;
+}
+
+int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
+ unsigned int *default_tc)
+{
+ int err;
+ u32 msg[5];
+
+ /* do nothing if API doesn't support ixgbevf_get_queues */
+ switch (hw->api_version) {
+ case ixgbe_mbox_api_11:
+ break;
+ default:
+ return 0;
+ }
+
+ /* Fetch queue configuration from the PF */
+ msg[0] = IXGBE_VF_GET_QUEUES;
+ msg[1] = msg[2] = msg[3] = msg[4] = 0;
+ err = hw->mbx.ops.write_posted(hw, msg, 5, 0);
+
+ if (!err)
+ err = hw->mbx.ops.read_posted(hw, msg, 5, 0);
+
+ if (!err) {
+ msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /*
+ * if we we didn't get an ACK there must have been
+ * some sort of mailbox error so we should treat it
+ * as such
+ */
+ if (msg[0] != (IXGBE_VF_GET_QUEUES | IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_ERR_MBX;
+
+ /* record and validate values from message */
+ hw->mac.max_tx_queues = msg[IXGBE_VF_TX_QUEUES];
+ if (hw->mac.max_tx_queues == 0 ||
+ hw->mac.max_tx_queues > IXGBE_VF_MAX_TX_QUEUES)
+ hw->mac.max_tx_queues = IXGBE_VF_MAX_TX_QUEUES;
+
+ hw->mac.max_rx_queues = msg[IXGBE_VF_RX_QUEUES];
+ if (hw->mac.max_rx_queues == 0 ||
+ hw->mac.max_rx_queues > IXGBE_VF_MAX_RX_QUEUES)
+ hw->mac.max_rx_queues = IXGBE_VF_MAX_RX_QUEUES;
+
+ *num_tcs = msg[IXGBE_VF_TRANS_VLAN];
+ /* in case of unknown state assume we cannot tag frames */
+ if (*num_tcs > hw->mac.max_rx_queues)
+ *num_tcs = 1;
+
+ *default_tc = msg[IXGBE_VF_DEF_QUEUE];
+ /* default to queue 0 on out-of-bounds queue number */
+ if (*default_tc >= hw->mac.max_tx_queues)
+ *default_tc = 0;
+ }
+
+ return err;
+}
new file mode 100644
@@ -0,0 +1,140 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef __IXGBE_VF_H__
+#define __IXGBE_VF_H__
+
+#define IXGBE_VF_IRQ_CLEAR_MASK 7
+#define IXGBE_VF_MAX_TX_QUEUES 8
+#define IXGBE_VF_MAX_RX_QUEUES 8
+
+/* DCB define */
+#define IXGBE_VF_MAX_TRAFFIC_CLASS 8
+
+#define IXGBE_VFCTRL 0x00000
+#define IXGBE_VFSTATUS 0x00008
+#define IXGBE_VFLINKS 0x00010
+#define IXGBE_VFFRTIMER 0x00048
+#define IXGBE_VFRXMEMWRAP 0x03190
+#define IXGBE_VTEICR 0x00100
+#define IXGBE_VTEICS 0x00104
+#define IXGBE_VTEIMS 0x00108
+#define IXGBE_VTEIMC 0x0010C
+#define IXGBE_VTEIAC 0x00110
+#define IXGBE_VTEIAM 0x00114
+#define IXGBE_VTEITR(x) (0x00820 + (4 * (x)))
+#define IXGBE_VTIVAR(x) (0x00120 + (4 * (x)))
+#define IXGBE_VTIVAR_MISC 0x00140
+#define IXGBE_VTRSCINT(x) (0x00180 + (4 * (x)))
+/* define IXGBE_VFPBACL still says TBD in EAS */
+#define IXGBE_VFRDBAL(x) (0x01000 + (0x40 * (x)))
+#define IXGBE_VFRDBAH(x) (0x01004 + (0x40 * (x)))
+#define IXGBE_VFRDLEN(x) (0x01008 + (0x40 * (x)))
+#define IXGBE_VFRDH(x) (0x01010 + (0x40 * (x)))
+#define IXGBE_VFRDT(x) (0x01018 + (0x40 * (x)))
+#define IXGBE_VFRXDCTL(x) (0x01028 + (0x40 * (x)))
+#define IXGBE_VFSRRCTL(x) (0x01014 + (0x40 * (x)))
+#define IXGBE_VFRSCCTL(x) (0x0102C + (0x40 * (x)))
+#define IXGBE_VFPSRTYPE 0x00300
+#define IXGBE_VFTDBAL(x) (0x02000 + (0x40 * (x)))
+#define IXGBE_VFTDBAH(x) (0x02004 + (0x40 * (x)))
+#define IXGBE_VFTDLEN(x) (0x02008 + (0x40 * (x)))
+#define IXGBE_VFTDH(x) (0x02010 + (0x40 * (x)))
+#define IXGBE_VFTDT(x) (0x02018 + (0x40 * (x)))
+#define IXGBE_VFTXDCTL(x) (0x02028 + (0x40 * (x)))
+#define IXGBE_VFTDWBAL(x) (0x02038 + (0x40 * (x)))
+#define IXGBE_VFTDWBAH(x) (0x0203C + (0x40 * (x)))
+#define IXGBE_VFDCA_RXCTRL(x) (0x0100C + (0x40 * (x)))
+#define IXGBE_VFDCA_TXCTRL(x) (0x0200c + (0x40 * (x)))
+#define IXGBE_VFGPRC 0x0101C
+#define IXGBE_VFGPTC 0x0201C
+#define IXGBE_VFGORC_LSB 0x01020
+#define IXGBE_VFGORC_MSB 0x01024
+#define IXGBE_VFGOTC_LSB 0x02020
+#define IXGBE_VFGOTC_MSB 0x02024
+#define IXGBE_VFMPRC 0x01034
+#define IXGBE_VFMRQC 0x3000
+#define IXGBE_VFRSSRK(x) (0x3100 + ((x) * 4))
+#define IXGBE_VFRETA(x) (0x3200 + ((x) * 4))
+
+
+struct ixgbevf_hw_stats {
+ u64 base_vfgprc;
+ u64 base_vfgptc;
+ u64 base_vfgorc;
+ u64 base_vfgotc;
+ u64 base_vfmprc;
+
+ u64 last_vfgprc;
+ u64 last_vfgptc;
+ u64 last_vfgorc;
+ u64 last_vfgotc;
+ u64 last_vfmprc;
+
+ u64 vfgprc;
+ u64 vfgptc;
+ u64 vfgorc;
+ u64 vfgotc;
+ u64 vfmprc;
+
+ u64 saved_reset_vfgprc;
+ u64 saved_reset_vfgptc;
+ u64 saved_reset_vfgorc;
+ u64 saved_reset_vfgotc;
+ u64 saved_reset_vfmprc;
+};
+
+s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw);
+s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool autoneg_wait_to_complete);
+s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr);
+s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, ixgbe_mc_addr_itr,
+ bool clear);
+s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on);
+void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size);
+int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api);
+int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
+ unsigned int *default_tc);
+
+#endif /* __IXGBE_VF_H__ */
new file mode 100644
@@ -0,0 +1,1012 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_X540_MAX_TX_QUEUES 128
+#define IXGBE_X540_MAX_RX_QUEUES 128
+#define IXGBE_X540_RAR_ENTRIES 128
+#define IXGBE_X540_MC_TBL_SIZE 128
+#define IXGBE_X540_VFT_TBL_SIZE 128
+#define IXGBE_X540_RX_PB_SIZE 384
+
+STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
+STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
+
+/**
+ * ixgbe_init_ops_X540 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for X540.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_X540");
+
+ ret_val = ixgbe_init_phy_ops_generic(hw);
+ ret_val = ixgbe_init_ops_generic(hw);
+
+
+ /* EEPROM */
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
+ eeprom->ops.read = ixgbe_read_eerd_X540;
+ eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_X540;
+ eeprom->ops.write = ixgbe_write_eewr_X540;
+ eeprom->ops.write_buffer = ixgbe_write_eewr_buffer_X540;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X540;
+ eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X540;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X540;
+
+ /* PHY */
+ phy->ops.init = ixgbe_init_phy_ops_generic;
+ phy->ops.reset = NULL;
+ if (!ixgbe_mng_present(hw))
+ phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
+
+ /* MAC */
+ mac->ops.reset_hw = ixgbe_reset_hw_X540;
+ mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
+ mac->ops.get_media_type = ixgbe_get_media_type_X540;
+ mac->ops.get_supported_physical_layer =
+ ixgbe_get_supported_physical_layer_X540;
+ mac->ops.read_analog_reg8 = NULL;
+ mac->ops.write_analog_reg8 = NULL;
+ mac->ops.start_hw = ixgbe_start_hw_X540;
+ mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
+ mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
+ mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
+ mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
+ mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
+ mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X540;
+ mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X540;
+ mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
+ mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
+
+ /* RAR, Multicast, VLAN */
+ mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
+ mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
+ mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
+ mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
+ mac->rar_highwater = 1;
+ mac->ops.set_vfta = ixgbe_set_vfta_generic;
+ mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
+ mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
+ mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
+ mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
+ mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
+
+ /* Link */
+ mac->ops.get_link_capabilities =
+ ixgbe_get_copper_link_capabilities_generic;
+ mac->ops.setup_link = ixgbe_setup_mac_link_X540;
+ mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
+ mac->ops.check_link = ixgbe_check_mac_link_generic;
+
+
+ mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
+ mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE;
+ mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+ /*
+ * FWSM register
+ * ARC supported; valid only if manageability features are
+ * enabled.
+ */
+ mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) &
+ IXGBE_FWSM_MODE_MASK) ? true : false;
+
+ hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
+
+ /* LEDs */
+ mac->ops.blink_led_start = ixgbe_blink_led_start_X540;
+ mac->ops.blink_led_stop = ixgbe_blink_led_stop_X540;
+
+ /* Manageability interface */
+ mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
+
+ mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_X540 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ ixgbe_get_copper_link_capabilities_generic(hw, speed, autoneg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_media_type_X540 - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ return ixgbe_media_type_copper;
+}
+
+/**
+ * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ **/
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ DEBUGFUNC("ixgbe_setup_mac_link_X540");
+ return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
+}
+
+/**
+ * ixgbe_reset_hw_X540 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, and perform a reset.
+ **/
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 ctrl, i;
+
+ DEBUGFUNC("ixgbe_reset_hw_X540");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
+mac_reset_top:
+ ctrl = IXGBE_CTRL_RST;
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
+ break;
+ }
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
+ status = IXGBE_ERR_RESET_FAILED;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Reset polling failed to complete.\n");
+ }
+ msec_delay(100);
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ /* Set the Rx packet buffer size. */
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ /* Store the permanent SAN mac address */
+ hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+ /* Add the SAN MAC address to the RAR only if it's a valid address */
+ if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+ hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+ hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+ /* Save the SAN MAC RAR index */
+ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
+ /* Reserve the last RAR for the SAN MAC address */
+ hw->mac.num_rar_entries--;
+ }
+
+ /* Store the alternative WWNN/WWPN prefix */
+ hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+ &hw->mac.wwpn_prefix);
+
+reset_hw_out:
+ return status;
+}
+
+/**
+ * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_start_hw_X540");
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ ret_val = ixgbe_start_hw_gen2(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_get_supported_physical_layer_X540");
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+ if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ DEBUGFUNC("ixgbe_init_eeprom_params_X540");
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->semaphore_delay = 10;
+ eeprom->type = ixgbe_flash;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+ DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_read_eerd_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_read_eerd_generic(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_read_eerd_buffer_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_read_eerd_buffer_generic(hw, offset,
+ words, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_write_eewr_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_write_eewr_generic(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_write_eewr_buffer_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_write_eewr_buffer_generic(hw, offset,
+ words, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ *
+ * This function does not use synchronization for EERD and EEWR. It can
+ * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ *
+ * @hw: pointer to hardware structure
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+ u16 i, j;
+ u16 checksum = 0;
+ u16 length = 0;
+ u16 pointer = 0;
+ u16 word = 0;
+ u16 checksum_last_word = IXGBE_EEPROM_CHECKSUM;
+ u16 ptr_start = IXGBE_PCIE_ANALOG_PTR;
+
+ /* Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores here. Instead use
+ * ixgbe_read_eerd_generic
+ */
+
+ DEBUGFUNC("ixgbe_calc_eeprom_checksum_X540");
+
+ /* Include 0x0-0x3F in the checksum */
+ for (i = 0; i <= checksum_last_word; i++) {
+ if (ixgbe_read_eerd_generic(hw, i, &word)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+ if (i != IXGBE_EEPROM_CHECKSUM)
+ checksum += word;
+ }
+
+ /* Include all data from pointers 0x3, 0x6-0xE. This excludes the
+ * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+ */
+ for (i = ptr_start; i < IXGBE_FW_PTR; i++) {
+ if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+ continue;
+
+ if (ixgbe_read_eerd_generic(hw, i, &pointer)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+
+ /* Skip pointer section if the pointer is invalid. */
+ if (pointer == 0xFFFF || pointer == 0 ||
+ pointer >= hw->eeprom.word_size)
+ continue;
+
+ if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+
+ /* Skip pointer section if length is invalid. */
+ if (length == 0xFFFF || length == 0 ||
+ (pointer + length) >= hw->eeprom.word_size)
+ continue;
+
+ for (j = pointer + 1; j <= pointer + length; j++) {
+ if (ixgbe_read_eerd_generic(hw, j, &word)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+ checksum += word;
+ }
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return (s32)checksum;
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
+ u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ DEBUGFUNC("ixgbe_validate_eeprom_checksum_X540");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ goto out;
+
+ checksum = (u16)(status & 0xffff);
+
+ /* Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores twice here.
+ */
+ status = ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
+ &read_checksum);
+ if (status)
+ goto out;
+
+ /* Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum) {
+ ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+ "Invalid EEPROM checksum");
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+ }
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum;
+
+ DEBUGFUNC("ixgbe_update_eeprom_checksum_X540");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ goto out;
+
+ checksum = (u16)(status & 0xffff);
+
+ /* Do not use hw->eeprom.ops.write because we do not want to
+ * take the synchronization semaphores twice here.
+ */
+ status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, checksum);
+ if (status)
+ goto out;
+
+ status = ixgbe_update_flash_X540(hw);
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ return status;
+}
+
+/**
+ * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ * EEPROM from shadow RAM to the flash device.
+ **/
+s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
+{
+ u32 flup;
+ s32 status;
+
+ DEBUGFUNC("ixgbe_update_flash_X540");
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == IXGBE_ERR_EEPROM) {
+ DEBUGOUT("Flash update time out\n");
+ goto out;
+ }
+
+ flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == IXGBE_SUCCESS)
+ DEBUGOUT("Flash update complete\n");
+ else
+ DEBUGOUT("Flash update time out\n");
+
+ if (hw->mac.type == ixgbe_mac_X540 && hw->revision_id == 0) {
+ flup = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ if (flup & IXGBE_EEC_SEC1VAL) {
+ flup |= IXGBE_EEC_FLUP;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+ }
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == IXGBE_SUCCESS)
+ DEBUGOUT("Flash update complete\n");
+ else
+ DEBUGOUT("Flash update time out\n");
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ * @hw: pointer to hardware structure
+ *
+ * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ * flash update is done.
+ **/
+STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 reg;
+ s32 status = IXGBE_ERR_EEPROM;
+
+ DEBUGFUNC("ixgbe_poll_flash_update_done_X540");
+
+ for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (reg & IXGBE_EEC_FLUDONE) {
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ msec_delay(5);
+ }
+
+ if (i == IXGBE_FLUDONE_ATTEMPTS)
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Flash update status polling timed out");
+
+ return status;
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ * the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 swmask = mask & IXGBE_GSSR_NVM_PHY_MASK;
+ u32 fwmask = swmask << 5;
+ u32 swi2c_mask = mask & IXGBE_GSSR_I2C_MASK;
+ u32 timeout = 200;
+ u32 hwmask = 0;
+ u32 swfw_sync;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_acquire_swfw_sync_X540");
+
+ if (swmask & IXGBE_GSSR_EEP_SM)
+ hwmask |= IXGBE_GSSR_FLASH_SM;
+
+ /* SW only mask doesn't have FW bit pair */
+ if (mask & IXGBE_GSSR_SW_MNG_SM)
+ swmask |= IXGBE_GSSR_SW_MNG_SM;
+
+ swmask |= swi2c_mask;
+ fwmask |= swi2c_mask << 2;
+ for (i = 0; i < timeout; i++) {
+ /* SW NVM semaphore bit is used for access to all
+ * SW_FW_SYNC bits (not just NVM)
+ */
+ if (ixgbe_get_swfw_sync_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask | hwmask))) {
+ swfw_sync |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+ return IXGBE_SUCCESS;
+ }
+ /* Firmware currently using resource (fwmask), hardware
+ * currently using resource (hwmask), or other software
+ * thread currently using resource (swmask)
+ */
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+ }
+
+ /* Failed to get SW only semaphore */
+ if (swmask == IXGBE_GSSR_SW_MNG_SM) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Failed to get SW only semaphore");
+ return IXGBE_ERR_SWFW_SYNC;
+ }
+
+ /* If the resource is not released by the FW/HW the SW can assume that
+ * the FW/HW malfunctions. In that case the SW should set the SW bit(s)
+ * of the requested resource(s) while ignoring the corresponding FW/HW
+ * bits in the SW_FW_SYNC register.
+ */
+ if (ixgbe_get_swfw_sync_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ if (swfw_sync & (fwmask | hwmask)) {
+ swfw_sync |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+ return IXGBE_SUCCESS;
+ }
+ /* If the resource is not released by other SW the SW can assume that
+ * the other SW malfunctions. In that case the SW should clear all SW
+ * flags that it does not own and then repeat the whole process once
+ * again.
+ */
+ if (swfw_sync & swmask) {
+ u32 rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM |
+ IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM;
+
+ if (swi2c_mask)
+ rmask |= IXGBE_GSSR_I2C_MASK;
+ ixgbe_release_swfw_sync_X540(hw, rmask);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ return IXGBE_ERR_SWFW_SYNC;
+ }
+ ixgbe_release_swfw_sync_semaphore(hw);
+
+ return IXGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through the SW_FW_SYNC register
+ * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ **/
+void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 swmask = mask & (IXGBE_GSSR_NVM_PHY_MASK | IXGBE_GSSR_SW_MNG_SM);
+ u32 swfw_sync;
+
+ DEBUGFUNC("ixgbe_release_swfw_sync_X540");
+
+ if (mask & IXGBE_GSSR_I2C_MASK)
+ swmask |= mask & IXGBE_GSSR_I2C_MASK;
+ ixgbe_get_swfw_sync_semaphore(hw);
+
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ swfw_sync &= ~swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+}
+
+/**
+ * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so SW/FW can gain control of shared resources
+ **/
+STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM;
+ u32 timeout = 2000;
+ u32 i;
+ u32 swsm;
+
+ DEBUGFUNC("ixgbe_get_swfw_sync_semaphore");
+
+ /* Get SMBI software semaphore between device drivers first */
+ for (i = 0; i < timeout; i++) {
+ /*
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI)) {
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ usec_delay(50);
+ }
+
+ /* Now get the semaphore between SW/FW through the REGSMP bit */
+ if (status == IXGBE_SUCCESS) {
+ for (i = 0; i < timeout; i++) {
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ if (!(swsm & IXGBE_SWFW_REGSMP))
+ break;
+
+ usec_delay(50);
+ }
+
+ /*
+ * Release semaphores and return error if SW NVM semaphore
+ * was not granted because we don't have access to the EEPROM
+ */
+ if (i >= timeout) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "REGSMP Software NVM semaphore not granted.\n");
+ ixgbe_release_swfw_sync_semaphore(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ } else {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Software semaphore SMBI between device drivers "
+ "not granted.\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+ u32 swsm;
+
+ DEBUGFUNC("ixgbe_release_swfw_sync_semaphore");
+
+ /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ swsm &= ~IXGBE_SWFW_REGSMP;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm);
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ swsm &= ~IXGBE_SWSM_SMBI;
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+ ixgbe_link_speed speed;
+ bool link_up;
+
+ DEBUGFUNC("ixgbe_blink_led_start_X540");
+
+ /*
+ * Link should be up in order for the blink bit in the LED control
+ * register to work. Force link and speed in the MAC if link is down.
+ * This will be reversed when we stop the blinking.
+ */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ if (link_up == false) {
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+ }
+ /* Set the LED to LINK_UP + BLINK. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+
+ DEBUGFUNC("ixgbe_blink_led_stop_X540");
+
+ /* Restore the LED to its default value. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ ledctl_reg &= ~IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+ /* Unforce link and speed in the MAC. */
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return IXGBE_SUCCESS;
+}
new file mode 100644
@@ -0,0 +1,66 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_X540_H_
+#define _IXGBE_X540_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *autoneg);
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool link_up_wait_to_complete);
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw);
+
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw);
+s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words,
+ u16 *data);
+s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words,
+ u16 *data);
+s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw);
+s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw);
+s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
+
+s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
+
+s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
+#endif /* _IXGBE_X540_H_ */
+
new file mode 100644
@@ -0,0 +1,3209 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_x550.h"
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed);
+
+/**
+ * ixgbe_init_ops_X550 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for X550.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_X550");
+
+ ret_val = ixgbe_init_ops_X540(hw);
+ mac->ops.dmac_config = ixgbe_dmac_config_X550;
+ mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550;
+ mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550;
+ mac->ops.setup_eee = ixgbe_setup_eee_X550;
+ mac->ops.set_source_address_pruning =
+ ixgbe_set_source_address_pruning_X550;
+ mac->ops.set_ethertype_anti_spoofing =
+ ixgbe_set_ethertype_anti_spoofing_X550;
+
+ mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_X550;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
+ eeprom->ops.read = ixgbe_read_ee_hostif_X550;
+ eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
+ eeprom->ops.write = ixgbe_write_ee_hostif_X550;
+ eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
+ eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
+
+ mac->ops.disable_mdd = ixgbe_disable_mdd_X550;
+ mac->ops.enable_mdd = ixgbe_enable_mdd_X550;
+ mac->ops.mdd_event = ixgbe_mdd_event_X550;
+ mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550;
+ mac->ops.disable_rx = ixgbe_disable_rx_x550;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
+ hw->mac.ops.led_on = ixgbe_led_on_t_X550em;
+ hw->mac.ops.led_off = ixgbe_led_off_t_X550em;
+ }
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_cs4227 - Read CS4227 register
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: pointer to receive value read
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
+{
+ return ixgbe_read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
+}
+
+/**
+ * ixgbe_write_cs4227 - Write CS4227 register
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: value to write to register
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
+{
+ return ixgbe_write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
+}
+
+/**
+ * ixgbe_get_cs4227_status - Return CS4227 status
+ * @hw: pointer to hardware structure
+ *
+ * Performs a diagnostic on the CS4227 chip. Returns an error if it is
+ * not operating correctly.
+ * This function assumes that the caller has acquired the proper semaphore.
+ **/
+STATIC s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 value = 0;
+ u16 reg_slice, reg_val;
+ u8 retry;
+
+ /* Check register reads. */
+ for (retry = 0; retry < IXGBE_CS4227_RETRIES; ++retry) {
+ status = ixgbe_read_cs4227(hw, IXGBE_CS4227_GLOBAL_ID_LSB,
+ &value);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (value == IXGBE_CS4227_GLOBAL_ID_VALUE)
+ break;
+ msec_delay(IXGBE_CS4227_CHECK_DELAY);
+ }
+ if (value != IXGBE_CS4227_GLOBAL_ID_VALUE)
+ return IXGBE_ERR_PHY;
+
+ status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If this is the first time after power-on, check the ucode.
+ * Otherwise, this will disrupt link on all ports. Because we
+ * can only do this the first time, we must check all ports,
+ * not just our own.
+ * While we are at it, set the LINE side to 10G SR, which is
+ * what it needs to be regardless of the actual link.
+ */
+ if (value != IXGBE_CS4227_SCRATCH_VALUE) {
+ reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB;
+ reg_val = IXGBE_CS4227_SPEED_10G;
+ status = ixgbe_write_cs4227(hw, reg_slice, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB;
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB;
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB + (1 << 12);
+ reg_val = IXGBE_CS4227_SPEED_10G;
+ status = ixgbe_write_cs4227(hw, reg_slice, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (1 << 12);
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (1 << 12);
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ status = ixgbe_write_cs4227(hw, reg_slice, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ msec_delay(10);
+ }
+
+ /* Verify that the ucode is operational on all ports. */
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB;
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB;
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (1 << 12);
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (1 << 12);
+ reg_val = 0xFFFF;
+ status = ixgbe_read_cs4227(hw, reg_slice, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (reg_val != 0)
+ return IXGBE_ERR_PHY;
+
+ /* Set scratch indicating that the diagnostic was successful. */
+ status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
+ IXGBE_CS4227_SCRATCH_VALUE);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (value != IXGBE_CS4227_SCRATCH_VALUE)
+ return IXGBE_ERR_PHY;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_pe - Read register from port expander
+ * @hw: pointer to hardware structure
+ * @reg: register number to read
+ * @value: pointer to receive read value
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value)
+{
+ s32 status;
+
+ status = ixgbe_read_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
+ if (status != IXGBE_SUCCESS)
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "port expander access failed with %d\n", status);
+ return status;
+}
+
+/**
+ * ixgbe_write_pe - Write register to port expander
+ * @hw: pointer to hardware structure
+ * @reg: register number to write
+ * @value: value to write
+ *
+ * Returns status code
+ **/
+STATIC s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
+{
+ s32 status;
+
+ status = ixgbe_write_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
+ if (status != IXGBE_SUCCESS)
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "port expander access failed with %d\n", status);
+ return status;
+}
+
+/**
+ * ixgbe_reset_cs4227 - Reset CS4227 using port expander
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ **/
+STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u8 reg;
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg |= IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg &= ~IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg &= ~IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ usec_delay(IXGBE_CS4227_RESET_HOLD);
+
+ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg |= IXGBE_PE_BIT1;
+ status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ msec_delay(IXGBE_CS4227_RESET_DELAY);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_check_cs4227 - Check CS4227 and reset as needed
+ * @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_check_cs4227(struct ixgbe_hw *hw)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ s32 status;
+ u8 retry;
+
+ for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
+ status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+ if (status != IXGBE_SUCCESS) {
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "semaphore failed with %d\n", status);
+ return;
+ }
+ status = ixgbe_get_cs4227_status(hw);
+ if (status == IXGBE_SUCCESS) {
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msec_delay(hw->eeprom.semaphore_delay);
+ return;
+ }
+ ixgbe_reset_cs4227(hw);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msec_delay(hw->eeprom.semaphore_delay);
+ }
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "Unable to initialize CS4227, err=%d\n", status);
+}
+
+/**
+ * ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
+ * @hw: pointer to hardware structure
+ **/
+STATIC void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
+{
+ u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ if (hw->bus.lan_id) {
+ esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+ esdp |= IXGBE_ESDP_SDP1_DIR;
+ }
+ esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_identify_phy_x550em - Get PHY type based on device id
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
+{
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_SFP:
+ /* set up for CS4227 usage */
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+ ixgbe_setup_mux_ctl(hw);
+ ixgbe_check_cs4227(hw);
+
+ return ixgbe_identify_module_generic(hw);
+ break;
+ case IXGBE_DEV_ID_X550EM_X_KX4:
+ hw->phy.type = ixgbe_phy_x550em_kx4;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ hw->phy.type = ixgbe_phy_x550em_kr;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ return ixgbe_identify_phy_generic(hw);
+ default:
+ break;
+ }
+ return IXGBE_SUCCESS;
+}
+
+STATIC s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, *phy_data);
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
+STATIC s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, phy_data);
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
+/**
+* ixgbe_init_ops_X550EM - Inits func ptrs and MAC type
+* @hw: pointer to hardware structure
+*
+* Initialize the function pointers and for MAC type X550EM.
+* Does not touch the hardware.
+**/
+s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_X550EM");
+
+ /* Similar to X550 so start there. */
+ ret_val = ixgbe_init_ops_X550(hw);
+
+ /* Since this function eventually calls
+ * ixgbe_init_ops_540 by design, we are setting
+ * the pointers to NULL explicitly here to overwrite
+ * the values being set in the x540 function.
+ */
+ /* Thermal sensor not supported in x550EM */
+ mac->ops.get_thermal_sensor_data = NULL;
+ mac->ops.init_thermal_sensor_thresh = NULL;
+ mac->thermal_sensor_enabled = false;
+
+ /* FCOE not supported in x550EM */
+ mac->ops.get_san_mac_addr = NULL;
+ mac->ops.set_san_mac_addr = NULL;
+ mac->ops.get_wwn_prefix = NULL;
+ mac->ops.get_fcoe_boot_status = NULL;
+
+ /* IPsec not supported in x550EM */
+ mac->ops.disable_sec_rx_path = NULL;
+ mac->ops.enable_sec_rx_path = NULL;
+
+ /* AUTOC register is not present in x550EM. */
+ mac->ops.prot_autoc_read = NULL;
+ mac->ops.prot_autoc_write = NULL;
+
+ /* X550EM bus type is internal*/
+ hw->bus.type = ixgbe_bus_type_internal;
+ mac->ops.get_bus_info = ixgbe_get_bus_info_X550em;
+
+ mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550;
+ mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550;
+ mac->ops.get_media_type = ixgbe_get_media_type_X550em;
+ mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em;
+ mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em;
+ mac->ops.reset_hw = ixgbe_reset_hw_X550em;
+ mac->ops.get_supported_physical_layer =
+ ixgbe_get_supported_physical_layer_X550em;
+
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
+ mac->ops.setup_fc = ixgbe_setup_fc_generic;
+ else
+ mac->ops.setup_fc = ixgbe_setup_fc_X550em;
+
+ mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
+ mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
+
+ if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR)
+ mac->ops.setup_eee = NULL;
+
+ /* PHY */
+ phy->ops.init = ixgbe_init_phy_ops_X550em;
+ phy->ops.identify = ixgbe_identify_phy_x550em;
+ if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
+ phy->ops.set_phy_power = NULL;
+
+
+ /* EEPROM */
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
+ eeprom->ops.read = ixgbe_read_ee_hostif_X550;
+ eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
+ eeprom->ops.write = ixgbe_write_ee_hostif_X550;
+ eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
+ eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_dmac_config_X550
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing. If enabling dmac, dmac is activated.
+ * When disabling dmac, dmac enable dmac bit is cleared.
+ **/
+s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
+{
+ u32 reg, high_pri_tc;
+
+ DEBUGFUNC("ixgbe_dmac_config_X550");
+
+ /* Disable DMA coalescing before configuring */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+ reg &= ~IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+ /* Disable DMA Coalescing if the watchdog timer is 0 */
+ if (!hw->mac.dmac_config.watchdog_timer)
+ goto out;
+
+ ixgbe_dmac_config_tcs_X550(hw);
+
+ /* Configure DMA Coalescing Control Register */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+
+ /* Set the watchdog timer in units of 40.96 usec */
+ reg &= ~IXGBE_DMACR_DMACWT_MASK;
+ reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096;
+
+ reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK;
+ /* If fcoe is enabled, set high priority traffic class */
+ if (hw->mac.dmac_config.fcoe_en) {
+ high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc;
+ reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) &
+ IXGBE_DMACR_HIGH_PRI_TC_MASK);
+ }
+ reg |= IXGBE_DMACR_EN_MNG_IND;
+
+ /* Enable DMA coalescing after configuration */
+ reg |= IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+out:
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dmac_config_tcs_X550
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing threshold per TC. The dmac enable bit must
+ * be cleared before configuring.
+ **/
+s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
+{
+ u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb;
+
+ DEBUGFUNC("ixgbe_dmac_config_tcs_X550");
+
+ /* Configure DMA coalescing enabled */
+ switch (hw->mac.dmac_config.link_speed) {
+ case IXGBE_LINK_SPEED_100_FULL:
+ pb_headroom = IXGBE_DMACRXT_100M;
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ pb_headroom = IXGBE_DMACRXT_1G;
+ break;
+ default:
+ pb_headroom = IXGBE_DMACRXT_10G;
+ break;
+ }
+
+ maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >>
+ IXGBE_MHADD_MFS_SHIFT) / 1024);
+
+ /* Set the per Rx packet buffer receive threshold */
+ for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_DMCTH(tc));
+ reg &= ~IXGBE_DMCTH_DMACRXT_MASK;
+
+ if (tc < hw->mac.dmac_config.num_tcs) {
+ /* Get Rx PB size */
+ rx_pb_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc));
+ rx_pb_size = (rx_pb_size & IXGBE_RXPBSIZE_MASK) >>
+ IXGBE_RXPBSIZE_SHIFT;
+
+ /* Calculate receive buffer threshold in kilobytes */
+ if (rx_pb_size > pb_headroom)
+ rx_pb_size = rx_pb_size - pb_headroom;
+ else
+ rx_pb_size = 0;
+
+ /* Minimum of MFS shall be set for DMCTH */
+ reg |= (rx_pb_size > maxframe_size_kb) ?
+ rx_pb_size : maxframe_size_kb;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_DMCTH(tc), reg);
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_dmac_update_tcs_X550
+ * @hw: pointer to hardware structure
+ *
+ * Disables dmac, updates per TC settings, and then enables dmac.
+ **/
+s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
+{
+ u32 reg;
+
+ DEBUGFUNC("ixgbe_dmac_update_tcs_X550");
+
+ /* Disable DMA coalescing before configuring */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+ reg &= ~IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+ ixgbe_dmac_config_tcs_X550(hw);
+
+ /* Enable DMA coalescing after configuration */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
+ reg |= IXGBE_DMACR_DMAC_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ DEBUGFUNC("ixgbe_init_eeprom_params_X550");
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->semaphore_delay = 10;
+ eeprom->type = ixgbe_flash;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+ DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_eee_X550 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @enable_eee: boolean flag to enable EEE
+ *
+ * Enable/disable EEE based on enable_eee flag.
+ * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ * are modified.
+ *
+ **/
+s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
+{
+ u32 eeer;
+ u16 autoneg_eee_reg;
+ u32 link_reg;
+ s32 status;
+ u32 fuse;
+
+ DEBUGFUNC("ixgbe_setup_eee_X550");
+
+ eeer = IXGBE_READ_REG(hw, IXGBE_EEER);
+ /* Enable or disable EEE per flag */
+ if (enable_eee) {
+ eeer |= (IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
+
+ if (hw->device_id == IXGBE_DEV_ID_X550T) {
+ /* Advertise EEE capability */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
+
+ autoneg_eee_reg |= (IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
+ } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+ /* Not supported on first revision. */
+ fuse = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0));
+ if (!(fuse & IXGBE_FUSES0_REV1))
+ return IXGBE_SUCCESS;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
+ IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX;
+
+ /* Don't advertise FEC capability when EEE enabled. */
+ link_reg &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+ } else {
+ eeer &= ~(IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
+
+ if (hw->device_id == IXGBE_DEV_ID_X550T) {
+ /* Disable advertised EEE capability */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
+
+ autoneg_eee_reg &= ~(IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
+ IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
+ } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
+ IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX);
+
+ /* Advertise FEC capability when EEE is disabled. */
+ link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_EEER, eeer);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_set_source_address_pruning_X550 - Enable/Disbale source address pruning
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable source address pruning
+ * @pool: Rx pool to set source address pruning for
+ **/
+void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
+ unsigned int pool)
+{
+ u64 pfflp;
+
+ /* max rx pool is 63 */
+ if (pool > 63)
+ return;
+
+ pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
+ pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
+
+ if (enable)
+ pfflp |= (1ULL << pool);
+ else
+ pfflp &= ~(1ULL << pool);
+
+ IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
+ IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
+}
+
+/**
+ * ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for Ethertype anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ *
+ **/
+void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
+ bool enable, int vf)
+{
+ int vf_target_reg = vf >> 3;
+ int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
+ u32 pfvfspoof;
+
+ DEBUGFUNC("ixgbe_set_ethertype_anti_spoofing_X550");
+
+ pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+ if (enable)
+ pfvfspoof |= (1 << vf_target_shift);
+ else
+ pfvfspoof &= ~(1 << vf_target_shift);
+
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/**
+ * ixgbe_iosf_wait - Wait for IOSF command completion
+ * @hw: pointer to hardware structure
+ * @ctrl: pointer to location to receive final IOSF control value
+ *
+ * Returns failing status on timeout
+ *
+ * Note: ctrl can be NULL if the IOSF control register value is not needed
+ **/
+STATIC s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
+{
+ u32 i, command = 0;
+
+ /* Check every 10 usec to see if the address cycle completed.
+ * The SB IOSF BUSY bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+ if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+ break;
+ usec_delay(10);
+ }
+ if (ctrl)
+ *ctrl = command;
+ if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
+ * device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @data: Data to write to the register
+ **/
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 data)
+{
+ u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
+ u32 command, error;
+ s32 ret;
+
+ ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ ret = ixgbe_iosf_wait(hw, NULL);
+ if (ret != IXGBE_SUCCESS)
+ goto out;
+
+ command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+ (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+ /* Write IOSF control register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+ /* Write IOSF data register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
+
+ ret = ixgbe_iosf_wait(hw, &command);
+
+ if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+ error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+ IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+ ERROR_REPORT2(IXGBE_ERROR_POLLING,
+ "Failed to write, error %x\n", error);
+ ret = IXGBE_ERR_PHY;
+ }
+
+out:
+ ixgbe_release_swfw_semaphore(hw, gssr);
+ return ret;
+}
+
+/**
+ * ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
+ * device
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 3 bit device type
+ * @phy_data: Pointer to read data from the register
+ **/
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *data)
+{
+ u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
+ u32 command, error;
+ s32 ret;
+
+ ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ ret = ixgbe_iosf_wait(hw, NULL);
+ if (ret != IXGBE_SUCCESS)
+ goto out;
+
+ command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+ (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+ /* Write IOSF control register */
+ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+ ret = ixgbe_iosf_wait(hw, &command);
+
+ if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+ error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+ IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+ ERROR_REPORT2(IXGBE_ERROR_POLLING,
+ "Failed to read, error %x\n", error);
+ ret = IXGBE_ERR_PHY;
+ }
+
+ if (ret == IXGBE_SUCCESS)
+ *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
+
+out:
+ ixgbe_release_swfw_semaphore(hw, gssr);
+ return ret;
+}
+
+/**
+ * ixgbe_disable_mdd_X550
+ * @hw: pointer to hardware structure
+ *
+ * Disable malicious driver detection
+ **/
+void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
+{
+ u32 reg;
+
+ DEBUGFUNC("ixgbe_disable_mdd_X550");
+
+ /* Disable MDD for TX DMA and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+ reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
+
+ /* Disable MDD for RX and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+}
+
+/**
+ * ixgbe_enable_mdd_X550
+ * @hw: pointer to hardware structure
+ *
+ * Enable malicious driver detection
+ **/
+void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
+{
+ u32 reg;
+
+ DEBUGFUNC("ixgbe_enable_mdd_X550");
+
+ /* Enable MDD for TX DMA and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+ reg |= (IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
+
+ /* Enable MDD for RX and interrupt */
+ reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ reg |= (IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+}
+
+/**
+ * ixgbe_restore_mdd_vf_X550
+ * @hw: pointer to hardware structure
+ * @vf: vf index
+ *
+ * Restore VF that was disabled during malicious driver detection event
+ **/
+void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
+{
+ u32 idx, reg, num_qs, start_q, bitmask;
+
+ DEBUGFUNC("ixgbe_restore_mdd_vf_X550");
+
+ /* Map VF to queues */
+ reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+ switch (reg & IXGBE_MRQC_MRQE_MASK) {
+ case IXGBE_MRQC_VMDQRT8TCEN:
+ num_qs = 8; /* 16 VFs / pools */
+ bitmask = 0x000000FF;
+ break;
+ case IXGBE_MRQC_VMDQRSS32EN:
+ case IXGBE_MRQC_VMDQRT4TCEN:
+ num_qs = 4; /* 32 VFs / pools */
+ bitmask = 0x0000000F;
+ break;
+ default: /* 64 VFs / pools */
+ num_qs = 2;
+ bitmask = 0x00000003;
+ break;
+ }
+ start_q = vf * num_qs;
+
+ /* Release vf's queues by clearing WQBR_TX and WQBR_RX (RW1C) */
+ idx = start_q / 32;
+ reg = 0;
+ reg |= (bitmask << (start_q % 32));
+ IXGBE_WRITE_REG(hw, IXGBE_WQBR_TX(idx), reg);
+ IXGBE_WRITE_REG(hw, IXGBE_WQBR_RX(idx), reg);
+}
+
+/**
+ * ixgbe_mdd_event_X550
+ * @hw: pointer to hardware structure
+ * @vf_bitmap: vf bitmap of malicious vfs
+ *
+ * Handle malicious driver detection event.
+ **/
+void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
+{
+ u32 wqbr;
+ u32 i, j, reg, q, shift, vf, idx;
+
+ DEBUGFUNC("ixgbe_mdd_event_X550");
+
+ /* figure out pool size for mapping to vf's */
+ reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
+ switch (reg & IXGBE_MRQC_MRQE_MASK) {
+ case IXGBE_MRQC_VMDQRT8TCEN:
+ shift = 3; /* 16 VFs / pools */
+ break;
+ case IXGBE_MRQC_VMDQRSS32EN:
+ case IXGBE_MRQC_VMDQRT4TCEN:
+ shift = 2; /* 32 VFs / pools */
+ break;
+ default:
+ shift = 1; /* 64 VFs / pools */
+ break;
+ }
+
+ /* Read WQBR_TX and WQBR_RX and check for malicious queues */
+ for (i = 0; i < 4; i++) {
+ wqbr = IXGBE_READ_REG(hw, IXGBE_WQBR_TX(i));
+ wqbr |= IXGBE_READ_REG(hw, IXGBE_WQBR_RX(i));
+
+ if (!wqbr)
+ continue;
+
+ /* Get malicious queue */
+ for (j = 0; j < 32 && wqbr; j++) {
+
+ if (!(wqbr & (1 << j)))
+ continue;
+
+ /* Get queue from bitmask */
+ q = j + (i * 32);
+
+ /* Map queue to vf */
+ vf = (q >> shift);
+
+ /* Set vf bit in vf_bitmap */
+ idx = vf / 32;
+ vf_bitmap[idx] |= (1 << (vf % 32));
+ wqbr &= ~(1 << j);
+ }
+ }
+}
+
+/**
+ * ixgbe_get_media_type_X550em - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ */
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ DEBUGFUNC("ixgbe_get_media_type_X550em");
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ case IXGBE_DEV_ID_X550EM_X_KX4:
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_SFP:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_1G_T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
+ media_type = ixgbe_media_type_copper;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+ return media_type;
+}
+
+/**
+ * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
+ * @hw: pointer to hardware structure
+ * @linear: true if SFP module is linear
+ */
+STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
+{
+ DEBUGFUNC("ixgbe_supported_sfp_modules_X550em");
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_not_present:
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+ case ixgbe_sfp_type_da_cu_core0:
+ case ixgbe_sfp_type_da_cu_core1:
+ *linear = true;
+ break;
+ case ixgbe_sfp_type_srlr_core0:
+ case ixgbe_sfp_type_srlr_core1:
+ case ixgbe_sfp_type_da_act_lmt_core0:
+ case ixgbe_sfp_type_da_act_lmt_core1:
+ case ixgbe_sfp_type_1g_sx_core0:
+ case ixgbe_sfp_type_1g_sx_core1:
+ case ixgbe_sfp_type_1g_lx_core0:
+ case ixgbe_sfp_type_1g_lx_core1:
+ *linear = false;
+ break;
+ case ixgbe_sfp_type_unknown:
+ case ixgbe_sfp_type_1g_cu_core0:
+ case ixgbe_sfp_type_1g_cu_core1:
+ default:
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_identify_sfp_module_X550em - Identifies SFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ bool linear;
+
+ DEBUGFUNC("ixgbe_identify_sfp_module_X550em");
+
+ status = ixgbe_identify_module_generic(hw);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Check if SFP module is supported */
+ status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
+ * @hw: pointer to hardware structure
+ */
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ bool linear;
+
+ DEBUGFUNC("ixgbe_setup_sfp_modules_X550em");
+
+ /* Check if SFP module is supported */
+ status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ ixgbe_init_mac_link_ops_X550em(hw);
+ hw->phy.ops.reset = NULL;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_mac_link_ops_X550em - init mac link function pointers
+ * @hw: pointer to hardware structure
+ */
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ DEBUGFUNC("ixgbe_init_mac_link_ops_X550em");
+
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ /* CS4227 does not support autoneg, so disable the laser control
+ * functions for SFP+ fiber
+ */
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
+ mac->ops.flap_tx_laser = NULL;
+ mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
+ mac->ops.set_rate_select_speed =
+ ixgbe_set_soft_rate_select_speed;
+ break;
+ case ixgbe_media_type_copper:
+ mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
+ mac->ops.check_link = ixgbe_check_link_t_X550em;
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * ixgbe_get_link_capabilities_x550em - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ */
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ DEBUGFUNC("ixgbe_get_link_capabilities_X550em");
+
+ /* SFP */
+ if (hw->phy.media_type == ixgbe_media_type_fiber) {
+
+ /* CS4227 SFP must not enable auto-negotiation */
+ *autoneg = false;
+
+ /* Check if 1G SFP module. */
+ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1
+ || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ return IXGBE_SUCCESS;
+ }
+
+ /* Link capabilities are based on SFP */
+ if (hw->phy.multispeed_fiber)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ } else {
+ *speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
+ * @hw: pointer to hardware structure
+ * @lsc: pointer to boolean flag which indicates whether external Base T
+ * PHY interrupt is lsc
+ *
+ * Determime if external Base T PHY interrupt cause is high temperature
+ * failure alarm or link status change.
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+STATIC s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
+{
+ u32 status;
+ u16 reg;
+
+ *lsc = false;
+
+ /* Vendor alarm triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS ||
+ !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
+ return status;
+
+ /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS ||
+ !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
+ IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
+ return status;
+
+ /* High temperature failure alarm triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If high temperature failure, then return over temp error and exit */
+ if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
+ /* power down the PHY in case the PHY FW didn't already */
+ ixgbe_set_copper_phy_power(hw, false);
+ return IXGBE_ERR_OVERTEMP;
+ }
+
+ /* Vendor alarm 2 triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
+
+ if (status != IXGBE_SUCCESS ||
+ !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
+ return status;
+
+ /* link connect/disconnect event occurred */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Indicate LSC */
+ if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC)
+ *lsc = true;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
+ * @hw: pointer to hardware structure
+ *
+ * Enable link status change and temperature failure alarm for the external
+ * Base T PHY
+ *
+ * Returns PHY access status
+ */
+STATIC s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 reg;
+ bool lsc;
+
+ /* Clear interrupt flags */
+ status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+
+ /* Enable link status change alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enables high temperature failure alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN;
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
+ IXGBE_MDIO_GLOBAL_ALARM_1_INT);
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enable chip-wide vendor alarm */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
+ * @hw: pointer to hardware structure
+ * @speed: link speed
+ *
+ * Configures the integrated KR PHY.
+ **/
+STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed)
+{
+ s32 status;
+ u32 reg_val;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status)
+ return status;
+
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
+ IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
+
+ /* Advertise 10G support. */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
+
+ /* Advertise 1G support. */
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
+
+ /* Restart auto-negotiation. */
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_init_phy_ops_X550em - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ */
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
+{
+ struct ixgbe_phy_info *phy = &hw->phy;
+ ixgbe_link_speed speed;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_phy_ops_X550em");
+
+ hw->mac.ops.set_lan_id(hw);
+
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+ phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+ ixgbe_setup_mux_ctl(hw);
+
+ /* Save NW management interface connected on board. This is used
+ * to determine internal PHY mode.
+ */
+ phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
+
+ /* If internal PHY mode is KR, then initialize KR link */
+ if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
+ speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
+ }
+
+ phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em;
+ }
+
+ /* Identify the PHY or SFP module */
+ ret_val = phy->ops.identify(hw);
+ if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ return ret_val;
+
+ /* Setup function pointers based on detected hardware */
+ ixgbe_init_mac_link_ops_X550em(hw);
+ if (phy->sfp_type != ixgbe_sfp_type_unknown)
+ phy->ops.reset = NULL;
+
+ /* Set functions pointers based on phy type */
+ switch (hw->phy.type) {
+ case ixgbe_phy_x550em_kx4:
+ phy->ops.setup_link = ixgbe_setup_kx4_x550em;
+ phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+ phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+ break;
+ case ixgbe_phy_x550em_kr:
+ phy->ops.setup_link = ixgbe_setup_kr_x550em;
+ phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+ phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+ break;
+ case ixgbe_phy_x550em_ext_t:
+ /* Save NW management interface connected on board. This is used
+ * to determine internal PHY mode
+ */
+ phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
+
+ /* If internal link mode is XFI, then setup iXFI internal link,
+ * else setup KR now.
+ */
+ if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ phy->ops.setup_internal_link =
+ ixgbe_setup_internal_phy_t_x550em;
+ } else {
+ speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
+ }
+
+ /* setup SW LPLU only for first revision */
+ if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
+ IXGBE_FUSES0_GROUP(0))))
+ phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
+
+ phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
+ phy->ops.reset = ixgbe_reset_phy_t_X550em;
+ break;
+ default:
+ break;
+ }
+ return ret_val;
+}
+
+/**
+ * ixgbe_reset_hw_X550em - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ */
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
+{
+ ixgbe_link_speed link_speed;
+ s32 status;
+ u32 ctrl = 0;
+ u32 i;
+ u32 hlreg0;
+ bool link_up = false;
+
+ DEBUGFUNC("ixgbe_reset_hw_X550em");
+
+ /* Call adapter stop to disable Tx/Rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Identify PHY and related function pointers */
+ status = hw->phy.ops.init(hw);
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ return status;
+
+ /* start the external PHY */
+ if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+ status = ixgbe_init_ext_t_x550em(hw);
+ if (status)
+ return status;
+ }
+
+ /* Setup SFP module if there is one present. */
+ if (hw->phy.sfp_setup_needed) {
+ status = hw->mac.ops.setup_sfp(hw);
+ hw->phy.sfp_setup_needed = false;
+ }
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ return status;
+
+ /* Reset PHY */
+ if (!hw->phy.reset_disable && hw->phy.ops.reset)
+ hw->phy.ops.reset(hw);
+
+mac_reset_top:
+ /* Issue global reset to the MAC. Needs to be SW reset if link is up.
+ * If link reset is used when link is up, it might reset the PHY when
+ * mng is using it. If link is down or the flag to force full link
+ * reset is set, then perform link reset.
+ */
+ ctrl = IXGBE_CTRL_LNK_RST;
+ if (!hw->force_full_reset) {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up)
+ ctrl = IXGBE_CTRL_RST;
+ }
+
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear meaning reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
+ break;
+ }
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
+ status = IXGBE_ERR_RESET_FAILED;
+ DEBUGOUT("Reset polling failed to complete.\n");
+ }
+
+ msec_delay(50);
+
+ /* Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to
+ * allow time for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /* Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
+ /* Config MDIO clock speed. */
+ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+ }
+
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
+ ixgbe_setup_mux_ctl(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
+ * @hw: pointer to hardware structure
+ */
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 reg;
+
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If PHY FW reset completed bit is set then this is the first
+ * SW instance after a power on so the PHY FW must be un-stalled.
+ */
+ if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_GLOBAL_RES_PR_10,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg &= ~IXGBE_MDIO_POWER_UP_STALL;
+
+ status = hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_GLOBAL_RES_PR_10,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_kr_x550em - Configure the KR PHY.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KR PHY.
+ **/
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
+{
+ return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
+}
+
+/**
+ * ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KX4 PHY.
+ **/
+s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 reg_val;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS, ®_val);
+ if (status)
+ return status;
+
+ reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
+ IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
+
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
+
+ /* Advertise 10G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
+
+ /* Advertise 1G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
+
+ /* Restart auto-negotiation. */
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
+ * @hw: pointer to hardware structure
+ *
+ * Configure the external PHY and the integrated KR PHY for SFP support.
+ **/
+s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 ret_val;
+ u16 reg_slice, reg_val;
+ bool setup_linear = false;
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+ /* Check if SFP module is supported and linear */
+ ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+
+ /* If no SFP module present, then return success. Return success since
+ * there is no reason to configure CS4227 and SFP not present error is
+ * not excepted in the setup MAC link flow.
+ */
+ if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
+ return IXGBE_SUCCESS;
+
+ if (ret_val != IXGBE_SUCCESS)
+ return ret_val;
+
+ /* Configure CS4227 LINE side to 10G SR. */
+ reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
+ reg_val = IXGBE_CS4227_SPEED_10G;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ /* Configure CS4227 for HOST connection rate then type. */
+ reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
+ reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ?
+ IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
+ if (setup_linear)
+ reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+ else
+ reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+ ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+ reg_val);
+
+ /* If internal link mode is XFI, then setup XFI internal link. */
+ if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))
+ ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
+ *
+ * Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ * internal and external PHY at a specific speed, without autonegotiation.
+ **/
+STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+ s32 status;
+ u32 reg_val;
+
+ /* Disable AN and force speed to 10G Serial. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+
+ /* Select forced link speed for internal PHY. */
+ switch (*speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+ break;
+ default:
+ /* Other link speeds are not supported by internal KR PHY. */
+ return IXGBE_ERR_LINK_SETUP;
+ }
+
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Disable training protocol FSM. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Disable Flex from training TXFFE. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+ reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Enable override for coefficients. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
+ reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Toggle port SW reset by AN reset. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
+ * @hw: address of hardware structure
+ * @link_up: address of boolean to indicate link status
+ *
+ * Returns error code if unable to get link status.
+ */
+STATIC s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
+{
+ u32 ret;
+ u16 autoneg_status;
+
+ *link_up = false;
+
+ /* read this twice back to back to indicate current status */
+ ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+ if (ret != IXGBE_SUCCESS)
+ return ret;
+
+ *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
+ * @hw: point to hardware structure
+ *
+ * Configures the link between the integrated KR PHY and the external X557 PHY
+ * The driver will call this function when it gets a link status change
+ * interrupt from the X557 PHY. This function configures the link speed
+ * between the PHYs to match the link speed of the BASE-T link.
+ *
+ * A return of a non-zero value indicates an error, and the base driver should
+ * not report link up.
+ */
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
+{
+ ixgbe_link_speed force_speed;
+ bool link_up;
+ u32 status;
+ u16 speed;
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+ return IXGBE_ERR_CONFIG;
+
+ /* If link is not up, then there is no setup necessary so return */
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (!link_up)
+ return IXGBE_SUCCESS;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &speed);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If link is not still up, then no setup is necessary so return */
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ if (!link_up)
+ return IXGBE_SUCCESS;
+
+ /* clear everything but the speed and duplex bits */
+ speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
+
+ switch (speed) {
+ case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
+ force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ break;
+ case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
+ force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ default:
+ /* Internal PHY does not support anything else */
+ return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ }
+
+ return ixgbe_setup_ixfi_x550em(hw, &force_speed);
+}
+
+/**
+ * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KR PHY to use internal loopback mode.
+ **/
+s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 reg_val;
+
+ /* Disable AN and force speed to 10G Serial. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+ reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+ reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Set near-end loopback clocks. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B;
+ reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Set loopback enable. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Training bypass. */
+ status = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (status != IXGBE_SUCCESS)
+ return status;
+ reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS;
+ status = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ * assuming that the semaphore is already obtained.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
+ struct ixgbe_hic_read_shadow_ram buffer;
+
+ DEBUGFUNC("ixgbe_read_ee_hostif_data_X550");
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
+ /* one word */
+ buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, false);
+
+ if (status)
+ return status;
+
+ *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+ FW_NVM_DATA_OFFSET);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_read_ee_hostif_X550");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ struct ixgbe_hic_read_shadow_ram buffer;
+ u32 current_word = 0;
+ u16 words_to_read;
+ s32 status;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550");
+
+ /* Take semaphore for the entire operation. */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ if (status) {
+ DEBUGOUT("EEPROM read buffer - semaphore failed\n");
+ return status;
+ }
+ while (words) {
+ if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+ words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+ else
+ words_to_read = words;
+
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2);
+ buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2);
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT,
+ false);
+
+ if (status) {
+ DEBUGOUT("Host interface command failed\n");
+ goto out;
+ }
+
+ for (i = 0; i < words_to_read; i++) {
+ u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
+ 2 * i;
+ u32 value = IXGBE_READ_REG(hw, reg);
+
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ i++;
+ if (i < words_to_read) {
+ value >>= 16;
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ }
+ }
+ words -= words_to_read;
+ }
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data)
+{
+ s32 status;
+ struct ixgbe_hic_write_shadow_ram buffer;
+
+ DEBUGFUNC("ixgbe_write_ee_hostif_data_X550");
+
+ buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* one word */
+ buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
+ buffer.data = data;
+ buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, false);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_write_ee_hostif_X550");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ DEBUGOUT("write ee hostif failed to get semaphore");
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the hostif.
+ **/
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 i = 0;
+
+ DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550");
+
+ /* Take semaphore for the entire operation. */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT("EEPROM write buffer - semaphore failed\n");
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
+ data[i]);
+
+ if (status != IXGBE_SUCCESS) {
+ DEBUGOUT("Eeprom buffered write failed\n");
+ break;
+ }
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+out:
+
+ return status;
+}
+
+/**
+ * ixgbe_checksum_ptr_x550 - Checksum one pointer region
+ * @hw: pointer to hardware structure
+ * @ptr: pointer offset in eeprom
+ * @size: size of section pointed by ptr, if 0 first word will be used as size
+ * @csum: address of checksum to update
+ *
+ * Returns error status for any failure
+ */
+STATIC s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
+ u16 size, u16 *csum, u16 *buffer,
+ u32 buffer_size)
+{
+ u16 buf[256];
+ s32 status;
+ u16 length, bufsz, i, start;
+ u16 *local_buffer;
+
+ bufsz = sizeof(buf) / sizeof(buf[0]);
+
+ /* Read a chunk at the pointer location */
+ if (!buffer) {
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
+ if (status) {
+ DEBUGOUT("Failed to read EEPROM image\n");
+ return status;
+ }
+ local_buffer = buf;
+ } else {
+ if (buffer_size < ptr)
+ return IXGBE_ERR_PARAM;
+ local_buffer = &buffer[ptr];
+ }
+
+ if (size) {
+ start = 0;
+ length = size;
+ } else {
+ start = 1;
+ length = local_buffer[0];
+
+ /* Skip pointer section if length is invalid. */
+ if (length == 0xFFFF || length == 0 ||
+ (ptr + length) >= hw->eeprom.word_size)
+ return IXGBE_SUCCESS;
+ }
+
+ if (buffer && ((u32)start + (u32)length > buffer_size))
+ return IXGBE_ERR_PARAM;
+
+ for (i = start; length; i++, length--) {
+ if (i == bufsz && !buffer) {
+ ptr += bufsz;
+ i = 0;
+ if (length < bufsz)
+ bufsz = length;
+
+ /* Read a chunk at the pointer location */
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
+ bufsz, buf);
+ if (status) {
+ DEBUGOUT("Failed to read EEPROM image\n");
+ return status;
+ }
+ }
+ *csum += local_buffer[i];
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_calc_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ * @buffer: pointer to buffer containing calculated checksum
+ * @buffer_size: size of buffer
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
+{
+ u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
+ u16 *local_buffer;
+ s32 status;
+ u16 checksum = 0;
+ u16 pointer, i, size;
+
+ DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550");
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (!buffer) {
+ /* Read pointer area */
+ status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
+ IXGBE_EEPROM_LAST_WORD + 1,
+ eeprom_ptrs);
+ if (status) {
+ DEBUGOUT("Failed to read EEPROM image\n");
+ return status;
+ }
+ local_buffer = eeprom_ptrs;
+ } else {
+ if (buffer_size < IXGBE_EEPROM_LAST_WORD)
+ return IXGBE_ERR_PARAM;
+ local_buffer = buffer;
+ }
+
+ /*
+ * For X550 hardware include 0x0-0x41 in the checksum, skip the
+ * checksum word itself
+ */
+ for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
+ if (i != IXGBE_EEPROM_CHECKSUM)
+ checksum += local_buffer[i];
+
+ /*
+ * Include all data from pointers 0x3, 0x6-0xE. This excludes the
+ * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+ */
+ for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
+ if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+ continue;
+
+ pointer = local_buffer[i];
+
+ /* Skip pointer section if the pointer is invalid. */
+ if (pointer == 0xFFFF || pointer == 0 ||
+ pointer >= hw->eeprom.word_size)
+ continue;
+
+ switch (i) {
+ case IXGBE_PCIE_GENERAL_PTR:
+ size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
+ break;
+ case IXGBE_PCIE_CONFIG0_PTR:
+ case IXGBE_PCIE_CONFIG1_PTR:
+ size = IXGBE_PCIE_CONFIG_SIZE;
+ break;
+ default:
+ size = 0;
+ break;
+ }
+
+ status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
+ buffer, buffer_size);
+ if (status)
+ return status;
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return (s32)checksum;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+ return ixgbe_calc_checksum_X550(hw, NULL, 0);
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+ &read_checksum);
+ if (status)
+ return status;
+
+ /* Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum) {
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+ ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+ "Invalid EEPROM checksum");
+ }
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum = 0;
+
+ DEBUGFUNC("ixgbe_update_eeprom_checksum_X550");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ status = ixgbe_calc_eeprom_checksum_X550(hw);
+ if (status < 0)
+ return status;
+
+ checksum = (u16)(status & 0xffff);
+
+ status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+ if (status)
+ return status;
+
+ status = ixgbe_update_flash_X550(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
+ **/
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ union ixgbe_hic_hdr2 buffer;
+
+ DEBUGFUNC("ixgbe_update_flash_X550");
+
+ buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
+ buffer.req.buf_lenh = 0;
+ buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
+ buffer.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ IXGBE_HI_COMMAND_TIMEOUT, false);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em");
+
+ hw->phy.ops.identify(hw);
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_x550em_kr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR |
+ IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ break;
+ case ixgbe_phy_x550em_kx4:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
+ IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ break;
+ case ixgbe_phy_x550em_ext_t:
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &ext_ability);
+ if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
+ physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_get_bus_info_x550em - Set PCI bus info
+ * @hw: pointer to hardware structure
+ *
+ * Sets bus link width and speed to unknown because X550em is
+ * not a PCI device.
+ **/
+s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
+{
+
+ DEBUGFUNC("ixgbe_get_bus_info_x550em");
+
+ hw->bus.width = ixgbe_bus_width_unknown;
+ hw->bus.speed = ixgbe_bus_speed_unknown;
+
+ hw->mac.ops.set_lan_id(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_disable_rx_x550 - Disable RX unit
+ *
+ * Enables the Rx DMA unit for x550
+ **/
+void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
+{
+ u32 rxctrl, pfdtxgswc;
+ s32 status;
+ struct ixgbe_hic_disable_rxen fw_cmd;
+
+ DEBUGFUNC("ixgbe_enable_rx_dma_x550");
+
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (rxctrl & IXGBE_RXCTRL_RXEN) {
+ pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+ if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+ pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+ hw->mac.set_lben = true;
+ } else {
+ hw->mac.set_lben = false;
+ }
+
+ fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
+ fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
+ fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
+ fw_cmd.port_number = (u8)hw->bus.lan_id;
+
+ status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+ sizeof(struct ixgbe_hic_disable_rxen),
+ IXGBE_HI_COMMAND_TIMEOUT, true);
+
+ /* If we fail - disable RX using register write */
+ if (status) {
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (rxctrl & IXGBE_RXCTRL_RXEN) {
+ rxctrl &= ~IXGBE_RXCTRL_RXEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+ }
+ }
+ }
+}
+
+/**
+ * ixgbe_enter_lplu_x550em - Transition to low power states
+ * @hw: pointer to hardware structure
+ *
+ * Configures Low Power Link Up on transition to low power states
+ * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
+ * X557 PHY immediately prior to entering LPLU.
+ **/
+s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
+{
+ u16 an_10g_cntl_reg, autoneg_reg, speed;
+ s32 status;
+ ixgbe_link_speed lcd_speed;
+ u32 save_autoneg;
+ bool link_up;
+
+ /* SW LPLU not required on later HW revisions. */
+ if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))
+ return IXGBE_SUCCESS;
+
+ /* If blocked by MNG FW, then don't restart AN */
+ if (ixgbe_check_reset_blocked(hw))
+ return IXGBE_SUCCESS;
+
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = ixgbe_read_eeprom(hw, NVM_INIT_CTRL_3, &hw->eeprom.ctrl_word_3);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If link is down, LPLU disabled in NVM, WoL disabled, or manageability
+ * disabled, then force link down by entering low power mode.
+ */
+ if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) ||
+ !(hw->wol_enabled || ixgbe_mng_present(hw)))
+ return ixgbe_set_copper_phy_power(hw, FALSE);
+
+ /* Determine LCD */
+ status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If no valid LCD link speed, then force link down and exit. */
+ if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN)
+ return ixgbe_set_copper_phy_power(hw, FALSE);
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &speed);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If no link now, speed is invalid so take link down */
+ status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
+ if (status != IXGBE_SUCCESS)
+ return ixgbe_set_copper_phy_power(hw, false);
+
+ /* clear everything but the speed bits */
+ speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK;
+
+ /* If current speed is already LCD, then exit. */
+ if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) &&
+ (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) ||
+ ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) &&
+ (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL)))
+ return status;
+
+ /* Clear AN completed indication */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &an_10g_cntl_reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ save_autoneg = hw->phy.autoneg_advertised;
+
+ /* Setup link at least common link speed */
+ status = hw->mac.ops.setup_link(hw, lcd_speed, false);
+
+ /* restore autoneg from before setting lplu speed */
+ hw->phy.autoneg_advertised = save_autoneg;
+
+ return status;
+}
+
+/**
+ * ixgbe_get_lcd_x550em - Determine lowest common denominator
+ * @hw: pointer to hardware structure
+ * @lcd_speed: pointer to lowest common link speed
+ *
+ * Determine lowest common link speed with link partner.
+ **/
+s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed)
+{
+ u16 an_lp_status;
+ s32 status;
+ u16 word = hw->eeprom.ctrl_word_3;
+
+ *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &an_lp_status);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If link partner advertised 1G, return 1G */
+ if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) {
+ *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL;
+ return status;
+ }
+
+ /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
+ if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) ||
+ (word & NVM_INIT_CTRL_3_D10GMP_PORT0))
+ return status;
+
+ /* Link partner not capable of lower speeds, return 10G */
+ *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ return status;
+}
+
+/**
+ * ixgbe_setup_fc_X550em - Set up flow control
+ * @hw: pointer to hardware structure
+ *
+ * Called at init time to set up flow control.
+ **/
+s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 pause, asm_dir, reg_val;
+
+ DEBUGFUNC("ixgbe_setup_fc_X550em");
+
+ /* Validate the requested mode */
+ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+ ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
+ "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /* 10gig parts do not have a word in the EEPROM to determine the
+ * default flow control setting, so we explicitly set it to full.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_default)
+ hw->fc.requested_mode = ixgbe_fc_full;
+
+ /* Determine PAUSE and ASM_DIR bits. */
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_none:
+ pause = 0;
+ asm_dir = 0;
+ break;
+ case ixgbe_fc_tx_pause:
+ pause = 0;
+ asm_dir = 1;
+ break;
+ case ixgbe_fc_rx_pause:
+ /* Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE, as such we fall
+ * through to the fc_full statement. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ case ixgbe_fc_full:
+ pause = 1;
+ asm_dir = 1;
+ break;
+ default:
+ ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
+ "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ }
+
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
+ ret_val = ixgbe_read_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+ reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
+ IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
+ if (pause)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
+ if (asm_dir)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
+ ret_val = ixgbe_write_iosf_sb_reg_x550(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ /* This device does not fully support AN. */
+ hw->fc.disable_fc_autoneg = true;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_set_mux - Set mux for port 1 access with CS4227
+ * @hw: pointer to hardware structure
+ * @state: set mux if 1, clear if 0
+ */
+STATIC void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
+{
+ u32 esdp;
+
+ if (!hw->bus.lan_id)
+ return;
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (state)
+ esdp |= IXGBE_ESDP_SDP1;
+ else
+ esdp &= ~IXGBE_ESDP_SDP1;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore and sets the I2C MUX
+ **/
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em");
+
+ status = ixgbe_acquire_swfw_sync_X540(hw, mask);
+ if (status)
+ return status;
+
+ if (mask & IXGBE_GSSR_I2C_MASK)
+ ixgbe_set_mux(hw, 1);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore and sets the I2C MUX
+ **/
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+ DEBUGFUNC("ixgbe_release_swfw_sync_X550em");
+
+ if (mask & IXGBE_GSSR_I2C_MASK)
+ ixgbe_set_mux(hw, 0);
+
+ ixgbe_release_swfw_sync_X540(hw, mask);
+}
+
+/**
+ * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
+ * @hw: pointer to hardware structure
+ *
+ * Handle external Base T PHY interrupt. If high temperature
+ * failure alarm then return error, else if link status change
+ * then setup internal/external PHY link
+ *
+ * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
+ * failure alarm, else return PHY access status.
+ */
+s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
+{
+ bool lsc;
+ u32 status;
+
+ status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (lsc)
+ return ixgbe_setup_internal_phy(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Setup internal/external PHY link speed based on link speed, then set
+ * external PHY auto advertised link speed.
+ *
+ * Returns error status for any failure
+ **/
+s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+ ixgbe_link_speed force_speed;
+
+ DEBUGFUNC("ixgbe_setup_mac_link_t_X550em");
+
+ /* Setup internal/external PHY link speed to iXFI (10G), unless
+ * only 1G is auto advertised then setup KX link.
+ */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else
+ force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* If internal link mode is XFI, then setup XFI internal link. */
+ if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
+
+ return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
+}
+
+/**
+ * ixgbe_check_link_t_X550em - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Check that both the MAC and X557 external PHY have link.
+ **/
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ u32 status;
+ u16 autoneg_status;
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+ return IXGBE_ERR_CONFIG;
+
+ status = ixgbe_check_mac_link_generic(hw, speed, link_up,
+ link_up_wait_to_complete);
+
+ /* If check link fails or MAC link is not up, then return */
+ if (status != IXGBE_SUCCESS || !(*link_up))
+ return status;
+
+ /* MAC link is up, so check external PHY link.
+ * Read this twice back to back to indicate current status.
+ */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* If external PHY link is not up, then indicate link not up */
+ if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
+ *link_up = false;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ status = ixgbe_reset_phy_generic(hw);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* Configure Link Status Alarm and Temperature Threshold interrupts */
+ return ixgbe_enable_lasi_ext_t_x550em(hw);
+}
+
+/**
+ * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @led_idx: led number to turn on
+ **/
+s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+ u16 phy_data;
+
+ DEBUGFUNC("ixgbe_led_on_t_X550em");
+
+ if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+ return IXGBE_ERR_PARAM;
+
+ /* To turn on the LED, set mode to ON. */
+ ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+ phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
+ ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @led_idx: led number to turn off
+ **/
+s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+ u16 phy_data;
+
+ DEBUGFUNC("ixgbe_led_off_t_X550em");
+
+ if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+ return IXGBE_ERR_PARAM;
+
+ /* To turn on the LED, set mode to ON. */
+ ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+ phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
+ ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+ return IXGBE_SUCCESS;
+}
new file mode 100644
@@ -0,0 +1,108 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#ifndef _IXGBE_X550_H_
+#define _IXGBE_X550_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw);
+
+s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw);
+s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw);
+s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw);
+s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size);
+s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw);
+s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data);
+s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data);
+s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data);
+s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
+u16 *data);
+s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 *data);
+s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+ u16 data);
+s32 ixgbe_set_eee_X550(struct ixgbe_hw *hw, bool enable_eee);
+s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee);
+void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
+ unsigned int pool);
+void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
+ bool enable, int vf);
+s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 data);
+s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *data);
+void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw);
+void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw);
+void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap);
+void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf);
+enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *autoneg);
+void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw);
+void ixgbe_disable_rx_x550(struct ixgbe_hw *hw);
+s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed);
+s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw);
+s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
+s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
+#endif /* _IXGBE_X550_H_ */
The ixgbe driver base files which are not supposed to be changed (exept for ixgbe_osdep.h) are copied here from DPDK: drivers/net/ixgbe/base/* (hash: 3b60ce8cbb959d7a6839f94ad995a3594c07801e) ixgbe_osdep.h is not changed here either (will be fix in later patch) Signed-off-by: Christophe Milard <christophe.milard@linaro.org> --- drivers/ixgbe/base/README | 61 + drivers/ixgbe/base/ixgbe_82598.c | 1436 ++++++++++ drivers/ixgbe/base/ixgbe_82598.h | 52 + drivers/ixgbe/base/ixgbe_82599.c | 2580 +++++++++++++++++ drivers/ixgbe/base/ixgbe_82599.h | 64 + drivers/ixgbe/base/ixgbe_api.c | 1643 +++++++++++ drivers/ixgbe/base/ixgbe_api.h | 220 ++ drivers/ixgbe/base/ixgbe_common.c | 5143 ++++++++++++++++++++++++++++++++++ drivers/ixgbe/base/ixgbe_common.h | 188 ++ drivers/ixgbe/base/ixgbe_dcb.c | 714 +++++ drivers/ixgbe/base/ixgbe_dcb.h | 174 ++ drivers/ixgbe/base/ixgbe_dcb_82598.c | 360 +++ drivers/ixgbe/base/ixgbe_dcb_82598.h | 99 + drivers/ixgbe/base/ixgbe_dcb_82599.c | 593 ++++ drivers/ixgbe/base/ixgbe_dcb_82599.h | 153 + drivers/ixgbe/base/ixgbe_mbx.c | 789 ++++++ drivers/ixgbe/base/ixgbe_mbx.h | 150 + drivers/ixgbe/base/ixgbe_osdep.h | 155 + drivers/ixgbe/base/ixgbe_phy.c | 2738 ++++++++++++++++++ drivers/ixgbe/base/ixgbe_phy.h | 207 ++ drivers/ixgbe/base/ixgbe_type.h | 4033 ++++++++++++++++++++++++++ drivers/ixgbe/base/ixgbe_vf.c | 723 +++++ drivers/ixgbe/base/ixgbe_vf.h | 140 + drivers/ixgbe/base/ixgbe_x540.c | 1012 +++++++ drivers/ixgbe/base/ixgbe_x540.h | 66 + drivers/ixgbe/base/ixgbe_x550.c | 3209 +++++++++++++++++++++ drivers/ixgbe/base/ixgbe_x550.h | 108 + 27 files changed, 26810 insertions(+) create mode 100644 drivers/ixgbe/base/README create mode 100644 drivers/ixgbe/base/ixgbe_82598.c create mode 100644 drivers/ixgbe/base/ixgbe_82598.h create mode 100644 drivers/ixgbe/base/ixgbe_82599.c create mode 100644 drivers/ixgbe/base/ixgbe_82599.h create mode 100644 drivers/ixgbe/base/ixgbe_api.c create mode 100644 drivers/ixgbe/base/ixgbe_api.h create mode 100644 drivers/ixgbe/base/ixgbe_common.c create mode 100644 drivers/ixgbe/base/ixgbe_common.h create mode 100644 drivers/ixgbe/base/ixgbe_dcb.c create mode 100644 drivers/ixgbe/base/ixgbe_dcb.h create mode 100644 drivers/ixgbe/base/ixgbe_dcb_82598.c create mode 100644 drivers/ixgbe/base/ixgbe_dcb_82598.h create mode 100644 drivers/ixgbe/base/ixgbe_dcb_82599.c create mode 100644 drivers/ixgbe/base/ixgbe_dcb_82599.h create mode 100644 drivers/ixgbe/base/ixgbe_mbx.c create mode 100644 drivers/ixgbe/base/ixgbe_mbx.h create mode 100644 drivers/ixgbe/base/ixgbe_osdep.h create mode 100644 drivers/ixgbe/base/ixgbe_phy.c create mode 100644 drivers/ixgbe/base/ixgbe_phy.h create mode 100644 drivers/ixgbe/base/ixgbe_type.h create mode 100644 drivers/ixgbe/base/ixgbe_vf.c create mode 100644 drivers/ixgbe/base/ixgbe_vf.h create mode 100644 drivers/ixgbe/base/ixgbe_x540.c create mode 100644 drivers/ixgbe/base/ixgbe_x540.h create mode 100644 drivers/ixgbe/base/ixgbe_x550.c create mode 100644 drivers/ixgbe/base/ixgbe_x550.h