| Message ID | 20220802153947.44457-3-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | a64f7d415281db0b727911de0035809f756b10d7 |
| Headers | show |
| Series | i2c/arm: dt-bindings: qcom: qcom,i2c-cci: convert to dtschema | expand |
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index b9304f81290a..f313f6964810 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1214,8 +1214,6 @@ camera@10 { reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; - gpios = <&tlmm 13 0>, - <&tlmm 9 GPIO_ACTIVE_LOW>; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "xvclk"; @@ -1256,8 +1254,6 @@ camera@60 { enable-gpios = <&tlmm 21 0>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; - gpios = <&tlmm 16 0>, - <&tlmm 21 0>; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "xclk";
The OV7251 and OV8856 camera sensor bindings do not allow property "gpios" and Linux driver does not parse it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Not tested on hardware. --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ---- 1 file changed, 4 deletions(-)