@@ -156,13 +156,12 @@ config RESET_IMX7
help
Support for reset controller on i.MX7/8 SoCs.
-config RESET_IPQ419
- bool "Reset driver for Qualcomm IPQ40xx SoCs"
- depends on DM_RESET && ARCH_IPQ40XX
+config RESET_QCOM
+ bool "Reset driver for Qualcomm SoCs"
+ depends on DM_RESET && (ARCH_SNAPDRAGON || ARCH_IPQ40XX)
default y
help
- Support for reset controller on Qualcomm
- IPQ40xx SoCs.
+ Support for reset controller on Qualcomm SoCs.
config RESET_SIFIVE
bool "Reset Driver for SiFive SoC's"
@@ -24,7 +24,7 @@ obj-$(CONFIG_RESET_MTMIPS) += reset-mtmips.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_HISILICON) += reset-hisilicon.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
-obj-$(CONFIG_RESET_IPQ419) += reset-ipq4019.o
+obj-$(CONFIG_RESET_QCOM) += reset-qcom.o
obj-$(CONFIG_RESET_SIFIVE) += reset-sifive.o
obj-$(CONFIG_RESET_SYSCON) += reset-syscon.o
obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
similarity index 79%
rename from drivers/reset/reset-ipq4019.c
rename to drivers/reset/reset-qcom.c
@@ -1,8 +1,10 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020 Sartura Ltd.
+ * Copyright (c) 2022 Linaro Ltd.
*
* Author: Robert Marko <robert.marko@sartura.hr>
+ * Sumit Garg <sumit.garg@linaro.org>
*
* Based on Linux driver
*/
@@ -10,12 +12,11 @@
#include <asm/io.h>
#include <common.h>
#include <dm.h>
-#include <dt-bindings/reset/qcom,ipq4019-reset.h>
#include <reset-uclass.h>
#include <linux/bitops.h>
#include <malloc.h>
-struct ipq4019_reset_priv {
+struct qcom_reset_priv {
phys_addr_t base;
};
@@ -24,7 +25,9 @@ struct qcom_reset_map {
u8 bit;
};
-static const struct qcom_reset_map gcc_ipq4019_resets[] = {
+#ifdef CONFIG_ARCH_IPQ40XX
+#include <dt-bindings/reset/qcom,ipq4019-reset.h>
+static const struct qcom_reset_map gcc_qcom_resets[] = {
[WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 },
[WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 },
[WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 },
@@ -97,11 +100,12 @@ static const struct qcom_reset_map gcc_ipq4019_resets[] = {
[GCC_MPM_BCR] = {0x24000, 0},
[GCC_SPDM_BCR] = {0x25000, 0},
};
+#endif
-static int ipq4019_reset_assert(struct reset_ctl *rst)
+static int qcom_reset_assert(struct reset_ctl *rst)
{
- struct ipq4019_reset_priv *priv = dev_get_priv(rst->dev);
- const struct qcom_reset_map *reset_map = gcc_ipq4019_resets;
+ struct qcom_reset_priv *priv = dev_get_priv(rst->dev);
+ const struct qcom_reset_map *reset_map = gcc_qcom_resets;
const struct qcom_reset_map *map;
u32 value;
@@ -114,10 +118,10 @@ static int ipq4019_reset_assert(struct reset_ctl *rst)
return 0;
}
-static int ipq4019_reset_deassert(struct reset_ctl *rst)
+static int qcom_reset_deassert(struct reset_ctl *rst)
{
- struct ipq4019_reset_priv *priv = dev_get_priv(rst->dev);
- const struct qcom_reset_map *reset_map = gcc_ipq4019_resets;
+ struct qcom_reset_priv *priv = dev_get_priv(rst->dev);
+ const struct qcom_reset_map *reset_map = gcc_qcom_resets;
const struct qcom_reset_map *map;
u32 value;
@@ -130,19 +134,19 @@ static int ipq4019_reset_deassert(struct reset_ctl *rst)
return 0;
}
-static const struct reset_ops ipq4019_reset_ops = {
- .rst_assert = ipq4019_reset_assert,
- .rst_deassert = ipq4019_reset_deassert,
+static const struct reset_ops qcom_reset_ops = {
+ .rst_assert = qcom_reset_assert,
+ .rst_deassert = qcom_reset_deassert,
};
-static const struct udevice_id ipq4019_reset_ids[] = {
+static const struct udevice_id qcom_reset_ids[] = {
{ .compatible = "qcom,gcc-reset-ipq4019" },
{ }
};
-static int ipq4019_reset_probe(struct udevice *dev)
+static int qcom_reset_probe(struct udevice *dev)
{
- struct ipq4019_reset_priv *priv = dev_get_priv(dev);
+ struct qcom_reset_priv *priv = dev_get_priv(dev);
priv->base = dev_read_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
@@ -151,11 +155,11 @@ static int ipq4019_reset_probe(struct udevice *dev)
return 0;
}
-U_BOOT_DRIVER(ipq4019_reset) = {
- .name = "ipq4019_reset",
+U_BOOT_DRIVER(qcom_reset) = {
+ .name = "qcom_reset",
.id = UCLASS_RESET,
- .of_match = ipq4019_reset_ids,
- .ops = &ipq4019_reset_ops,
- .probe = ipq4019_reset_probe,
- .priv_auto = sizeof(struct ipq4019_reset_priv),
+ .of_match = qcom_reset_ids,
+ .ops = &qcom_reset_ops,
+ .probe = qcom_reset_probe,
+ .priv_auto = sizeof(struct qcom_reset_priv),
};
Since the base functionality remains the same for a reset driver on Qcom SoCs, so leverage that to convert ipq4019 specific reset driver to a generic Qcom reset driver. With that one just need to provide SoC specific reset table. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> --- drivers/reset/Kconfig | 9 ++-- drivers/reset/Makefile | 2 +- .../reset/{reset-ipq4019.c => reset-qcom.c} | 46 ++++++++++--------- 3 files changed, 30 insertions(+), 27 deletions(-) rename drivers/reset/{reset-ipq4019.c => reset-qcom.c} (79%)