new file mode 100644
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI tps65219 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Jerome Neanne <jerome.neanne@baylibre.com>
+
+description: |
+ Regulator nodes should be named to buck<number> and ldo<number>.
+
+properties:
+ compatible:
+ enum:
+ - ti,tps65219
+
+ reg:
+ maxItems: 1
+
+ system-power-controller:
+ type: boolean
+ description: Optional property that indicates that this device is
+ controlling system power.
+
+ interrupts:
+ description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description: Specifies the PIN numbers and Flags, as defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 1
+
+ ti,power-button:
+ type: boolean
+ description: |
+ Optional property that sets the EN/PB/VSENSE pin to be a
+ power-button.
+ TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either
+ 1. EN in which case it functions as an enable pin.
+ 2. VSENSE which compares the voltages and triggers an automatic
+ on/off request.
+ 3. PB in which case it can be configured to trigger an interrupt
+ to the SoC.
+ ti,power-button reflects the last one of those options
+ where the board has a button wired to the pin and triggers
+ an interrupt on pressing it.
+
+patternProperties:
+ "^buck[1-3]-supply$":
+ description: Input supply phandle of one regulator.
+
+ "^ldo[1-4]-supply$":
+ description: Input supply phandle of one regulator.
+
+ regulators:
+ type: object
+ description: |
+ list of regulators provided by this controller
+
+ patternProperties:
+ "^ldo[1-4]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ unevaluatedProperties: false
+
+ "^buck[1-3]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tps65219: pmic@30 {
+ compatible = "ti,tps65219";
+ reg = <0x30>;
+ buck1-supply = <&vcc_3v3_sys>;
+ buck2-supply = <&vcc_3v3_sys>;
+ buck3-supply = <&vcc_3v3_sys>;
+ ldo1-supply = <&vcc_3v3_sys>;
+ ldo2-supply = <&buck2_reg>;
+ ldo3-supply = <&vcc_3v3_sys>;
+ ldo4-supply = <&vcc_3v3_sys>;
+
+ pinctrl-0 = <&pmic_irq_pins_default>;
+
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ ti,power-button;
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "VDD_LPDDR4";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "VDDSHV_SD_IO_PMIC";
+ regulator-min-microvolt = <33000000>;
+ regulator-max-microvolt = <33000000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "VDDAR_CORE";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <18000000>;
+ regulator-max-microvolt = <18000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "VDD_PHY_2V5";
+ regulator-min-microvolt = <25000000>;
+ regulator-max-microvolt = <25000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };