diff mbox

[6/8] qemu: process: Drop !QEMU_CAPS_DEVICE code

Message ID d260285385b022208f85ab004353457dcfa9f6b2.1452725835.git.crobinso@redhat.com
State Superseded
Headers show

Commit Message

Cole Robinson Jan. 13, 2016, 11:03 p.m. UTC
Nowadays we only support qemu 0.12.0+ which provides QEMU_CAPS_DEVICE,
so this is all dead code.
---
 src/qemu/qemu_process.c | 471 +++---------------------------------------------
 1 file changed, 27 insertions(+), 444 deletions(-)

-- 
2.5.0

--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
diff mbox

Patch

diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index f083f3f..625e74c 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -2404,31 +2404,29 @@  qemuProcessInitPasswords(virConnectPtr conn,
             goto cleanup;
     }
 
-    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
-        for (i = 0; i < vm->def->ndisks; i++) {
-            size_t secretLen;
+    for (i = 0; i < vm->def->ndisks; i++) {
+        size_t secretLen;
 
-            if (!vm->def->disks[i]->src->encryption ||
-                !virDomainDiskGetSource(vm->def->disks[i]))
-                continue;
+        if (!vm->def->disks[i]->src->encryption ||
+            !virDomainDiskGetSource(vm->def->disks[i]))
+            continue;
 
-            VIR_FREE(secret);
-            if (qemuProcessGetVolumeQcowPassphrase(conn,
-                                                   vm->def->disks[i],
-                                                   &secret, &secretLen) < 0)
-                goto cleanup;
+        VIR_FREE(secret);
+        if (qemuProcessGetVolumeQcowPassphrase(conn,
+                                               vm->def->disks[i],
+                                               &secret, &secretLen) < 0)
+            goto cleanup;
 
-            VIR_FREE(alias);
-            if (VIR_STRDUP(alias, vm->def->disks[i]->info.alias) < 0)
-                goto cleanup;
-            if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
-                goto cleanup;
-            ret = qemuMonitorSetDrivePassphrase(priv->mon, alias, secret);
-            if (qemuDomainObjExitMonitor(driver, vm) < 0)
-                ret = -1;
-            if (ret < 0)
-                goto cleanup;
-        }
+        VIR_FREE(alias);
+        if (VIR_STRDUP(alias, vm->def->disks[i]->info.alias) < 0)
+            goto cleanup;
+        if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
+            goto cleanup;
+        ret = qemuMonitorSetDrivePassphrase(priv->mon, alias, secret);
+        if (qemuDomainObjExitMonitor(driver, vm) < 0)
+            ret = -1;
+        if (ret < 0)
+            goto cleanup;
     }
 
  cleanup:
@@ -2439,400 +2437,6 @@  qemuProcessInitPasswords(virConnectPtr conn,
 }
 
 
-#define QEMU_PCI_VENDOR_INTEL     0x8086
-#define QEMU_PCI_VENDOR_LSI_LOGIC 0x1000
-#define QEMU_PCI_VENDOR_REDHAT    0x1af4
-#define QEMU_PCI_VENDOR_CIRRUS    0x1013
-#define QEMU_PCI_VENDOR_REALTEK   0x10ec
-#define QEMU_PCI_VENDOR_AMD       0x1022
-#define QEMU_PCI_VENDOR_ENSONIQ   0x1274
-#define QEMU_PCI_VENDOR_VMWARE    0x15ad
-#define QEMU_PCI_VENDOR_QEMU      0x1234
-
-#define QEMU_PCI_PRODUCT_DISK_VIRTIO 0x1001
-
-#define QEMU_PCI_PRODUCT_BALLOON_VIRTIO 0x1002
-
-#define QEMU_PCI_PRODUCT_NIC_NE2K     0x8029
-#define QEMU_PCI_PRODUCT_NIC_PCNET    0x2000
-#define QEMU_PCI_PRODUCT_NIC_RTL8139  0x8139
-#define QEMU_PCI_PRODUCT_NIC_E1000    0x100E
-#define QEMU_PCI_PRODUCT_NIC_VIRTIO   0x1000
-
-#define QEMU_PCI_PRODUCT_VGA_CIRRUS 0x00b8
-#define QEMU_PCI_PRODUCT_VGA_VMWARE 0x0405
-#define QEMU_PCI_PRODUCT_VGA_STDVGA 0x1111
-
-#define QEMU_PCI_PRODUCT_AUDIO_AC97    0x2415
-#define QEMU_PCI_PRODUCT_AUDIO_ES1370  0x5000
-
-#define QEMU_PCI_PRODUCT_CONTROLLER_PIIX 0x7010
-#define QEMU_PCI_PRODUCT_CONTROLLER_LSI  0x0012
-
-#define QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB 0x25ab
-
-static int
-qemuProcessAssignNextPCIAddress(virDomainDeviceInfo *info,
-                                int vendor,
-                                int product,
-                                qemuMonitorPCIAddress *addrs,
-                                int naddrs)
-{
-    bool found = false;
-    size_t i;
-
-    VIR_DEBUG("Look for %x:%x out of %d", vendor, product, naddrs);
-
-    for (i = 0; i < naddrs; i++) {
-        VIR_DEBUG("Maybe %x:%x", addrs[i].vendor, addrs[i].product);
-        if (addrs[i].vendor == vendor &&
-            addrs[i].product == product) {
-            VIR_DEBUG("Match %zu", i);
-            found = true;
-            break;
-        }
-    }
-    if (!found)
-        return -1;
-
-    /* Blank it out so this device isn't matched again */
-    addrs[i].vendor = 0;
-    addrs[i].product = 0;
-
-    if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
-        info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI;
-
-    if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
-        info->addr.pci.domain = addrs[i].addr.domain;
-        info->addr.pci.bus = addrs[i].addr.bus;
-        info->addr.pci.slot = addrs[i].addr.slot;
-        info->addr.pci.function = addrs[i].addr.function;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCIDiskVendorProduct(virDomainDiskDefPtr def,
-                                   unsigned *vendor,
-                                   unsigned *product)
-{
-    switch (def->bus) {
-    case VIR_DOMAIN_DISK_BUS_VIRTIO:
-        *vendor = QEMU_PCI_VENDOR_REDHAT;
-        *product = QEMU_PCI_PRODUCT_DISK_VIRTIO;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCINetVendorProduct(virDomainNetDefPtr def,
-                                  unsigned *vendor,
-                                  unsigned *product)
-{
-    if (!def->model)
-        return -1;
-
-    if (STREQ(def->model, "ne2k_pci")) {
-        *vendor = QEMU_PCI_VENDOR_REALTEK;
-        *product = QEMU_PCI_PRODUCT_NIC_NE2K;
-    } else if (STREQ(def->model, "pcnet")) {
-        *vendor = QEMU_PCI_VENDOR_AMD;
-        *product = QEMU_PCI_PRODUCT_NIC_PCNET;
-    } else if (STREQ(def->model, "rtl8139")) {
-        *vendor = QEMU_PCI_VENDOR_REALTEK;
-        *product = QEMU_PCI_PRODUCT_NIC_RTL8139;
-    } else if (STREQ(def->model, "e1000")) {
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_NIC_E1000;
-    } else if (STREQ(def->model, "virtio")) {
-        *vendor = QEMU_PCI_VENDOR_REDHAT;
-        *product = QEMU_PCI_PRODUCT_NIC_VIRTIO;
-    } else {
-        VIR_INFO("Unexpected NIC model %s, cannot get PCI address",
-                 def->model);
-        return -1;
-    }
-    return 0;
-}
-
-static int
-qemuProcessGetPCIControllerVendorProduct(virDomainControllerDefPtr def,
-                                         unsigned *vendor,
-                                         unsigned *product)
-{
-    switch (def->type) {
-    case VIR_DOMAIN_CONTROLLER_TYPE_SCSI:
-        *vendor = QEMU_PCI_VENDOR_LSI_LOGIC;
-        *product = QEMU_PCI_PRODUCT_CONTROLLER_LSI;
-        break;
-
-    case VIR_DOMAIN_CONTROLLER_TYPE_FDC:
-        /* XXX we could put in the ISA bridge address, but
-           that's not technically the FDC's address */
-        return -1;
-
-    case VIR_DOMAIN_CONTROLLER_TYPE_IDE:
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_CONTROLLER_PIIX;
-        break;
-
-    default:
-        VIR_INFO("Unexpected controller type %s, cannot get PCI address",
-                 virDomainControllerTypeToString(def->type));
-        return -1;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCIVideoVendorProduct(virDomainVideoDefPtr def,
-                                    unsigned *vendor,
-                                    unsigned *product)
-{
-    switch (def->type) {
-    case VIR_DOMAIN_VIDEO_TYPE_CIRRUS:
-        *vendor = QEMU_PCI_VENDOR_CIRRUS;
-        *product = QEMU_PCI_PRODUCT_VGA_CIRRUS;
-        break;
-
-    case VIR_DOMAIN_VIDEO_TYPE_VGA:
-        *vendor = QEMU_PCI_VENDOR_QEMU;
-        *product = QEMU_PCI_PRODUCT_VGA_STDVGA;
-        break;
-
-    case VIR_DOMAIN_VIDEO_TYPE_VMVGA:
-        *vendor = QEMU_PCI_VENDOR_VMWARE;
-        *product = QEMU_PCI_PRODUCT_VGA_VMWARE;
-        break;
-
-    default:
-        return -1;
-    }
-    return 0;
-}
-
-static int
-qemuProcessGetPCISoundVendorProduct(virDomainSoundDefPtr def,
-                                    unsigned *vendor,
-                                    unsigned *product)
-{
-    switch (def->model) {
-    case VIR_DOMAIN_SOUND_MODEL_ES1370:
-        *vendor = QEMU_PCI_VENDOR_ENSONIQ;
-        *product = QEMU_PCI_PRODUCT_AUDIO_ES1370;
-        break;
-
-    case VIR_DOMAIN_SOUND_MODEL_AC97:
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_AUDIO_AC97;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCIWatchdogVendorProduct(virDomainWatchdogDefPtr def,
-                                       unsigned *vendor,
-                                       unsigned *product)
-{
-    switch (def->model) {
-    case VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB:
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-
-static int
-qemuProcessGetPCIMemballoonVendorProduct(virDomainMemballoonDefPtr def,
-                                         unsigned *vendor,
-                                         unsigned *product)
-{
-    switch (def->model) {
-    case VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO:
-        *vendor = QEMU_PCI_VENDOR_REDHAT;
-        *product = QEMU_PCI_PRODUCT_BALLOON_VIRTIO;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-
-/*
- * This entire method assumes that PCI devices in 'info pci'
- * match ordering of devices specified on the command line
- * wrt to devices of matching vendor+product
- *
- * XXXX this might not be a valid assumption if we assign
- * some static addrs on CLI. Have to check that...
- */
-static int
-qemuProcessDetectPCIAddresses(virDomainObjPtr vm,
-                              qemuMonitorPCIAddress *addrs,
-                              int naddrs)
-{
-    unsigned int vendor = 0, product = 0;
-    size_t i;
-
-    /* XXX should all these vendor/product IDs be kept in the
-     * actual device data structure instead ?
-     */
-
-    for (i = 0; i < vm->def->ndisks; i++) {
-        if (qemuProcessGetPCIDiskVendorProduct(vm->def->disks[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->disks[i]->info),
-                                            vendor, product,
-                                            addrs, naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for VirtIO disk %s"),
-                           vm->def->disks[i]->dst);
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->nnets; i++) {
-        if (qemuProcessGetPCINetVendorProduct(vm->def->nets[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->nets[i]->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for %s NIC"),
-                           vm->def->nets[i]->model);
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->ncontrollers; i++) {
-        if (qemuProcessGetPCIControllerVendorProduct(vm->def->controllers[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->controllers[i]->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for controller %s"),
-                           virDomainControllerTypeToString(vm->def->controllers[i]->type));
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->nvideos; i++) {
-        if (qemuProcessGetPCIVideoVendorProduct(vm->def->videos[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->videos[i]->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for video adapter %s"),
-                           virDomainVideoTypeToString(vm->def->videos[i]->type));
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->nsounds; i++) {
-        if (qemuProcessGetPCISoundVendorProduct(vm->def->sounds[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->sounds[i]->info),
-                                    vendor, product,
-                                     addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for sound adapter %s"),
-                           virDomainSoundModelTypeToString(vm->def->sounds[i]->model));
-            return -1;
-        }
-    }
-
-
-    if (vm->def->watchdog &&
-        qemuProcessGetPCIWatchdogVendorProduct(vm->def->watchdog, &vendor, &product) == 0) {
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->watchdog->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for watchdog %s"),
-                           virDomainWatchdogModelTypeToString(vm->def->watchdog->model));
-            return -1;
-        }
-    }
-
-    if (vm->def->memballoon &&
-        qemuProcessGetPCIMemballoonVendorProduct(vm->def->memballoon, &vendor, &product) == 0) {
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->memballoon->info),
-                                            vendor, product,
-                                            addrs, naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for balloon %s"),
-                           virDomainMemballoonModelTypeToString(vm->def->memballoon->model));
-            return -1;
-        }
-    }
-
-    /* XXX console (virtio) */
-
-
-    /* ... and now things we don't have in our xml */
-
-    /* XXX USB controller ? */
-
-    /* XXX what about other PCI devices (ie bridges) */
-
-    return 0;
-}
-
-static int
-qemuProcessInitPCIAddresses(virQEMUDriverPtr driver,
-                            virDomainObjPtr vm,
-                            int asyncJob)
-{
-    qemuDomainObjPrivatePtr priv = vm->privateData;
-    int naddrs;
-    int ret = -1;
-    qemuMonitorPCIAddress *addrs = NULL;
-
-    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
-        return -1;
-    naddrs = qemuMonitorGetAllPCIAddresses(priv->mon,
-                                           &addrs);
-    if (qemuDomainObjExitMonitor(driver, vm) < 0)
-        goto cleanup;
-
-    if (naddrs > 0)
-        ret = qemuProcessDetectPCIAddresses(vm, addrs, naddrs);
-
- cleanup:
-    VIR_FREE(addrs);
-
-    return ret;
-}
-
-
 static int
 qemuProcessPrepareChardevDevice(virDomainDefPtr def ATTRIBUTE_UNUSED,
                                 virDomainChrDefPtr dev,
@@ -3600,9 +3204,8 @@  qemuProcessReconnect(void *opaque)
         goto cleanup;
     }
 
-    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE))
-        if ((qemuDomainAssignAddresses(obj->def, priv->qemuCaps, obj)) < 0)
-            goto error;
+    if ((qemuDomainAssignAddresses(obj->def, priv->qemuCaps, obj)) < 0)
+        goto error;
 
     /* if domain requests security driver we haven't loaded, report error, but
      * do not kill the domain
@@ -4750,11 +4353,9 @@  qemuProcessLaunch(virConnectPtr conn,
      * we also need to populate the PCI address set cache for later
      * use in hotplug
      */
-    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
-        VIR_DEBUG("Assigning domain PCI addresses");
-        if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0)
-            goto cleanup;
-    }
+    VIR_DEBUG("Assigning domain PCI addresses");
+    if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0)
+        goto cleanup;
 
     VIR_DEBUG("Checking for any possible (non-fatal) issues");
 
@@ -5006,14 +4607,6 @@  qemuProcessLaunch(virConnectPtr conn,
     if (qemuProcessInitPasswords(conn, driver, vm, asyncJob) < 0)
         goto cleanup;
 
-    /* If we have -device, then addresses are assigned explicitly.
-     * If not, then we have to detect dynamic ones here */
-    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
-        VIR_DEBUG("Determining domain device PCI addresses");
-        if (qemuProcessInitPCIAddresses(driver, vm, asyncJob) < 0)
-            goto cleanup;
-    }
-
     /* set default link states */
     /* qemu doesn't support setting this on the command line, so
      * enter the monitor */
@@ -5652,11 +5245,9 @@  int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED,
      * we also need to populate the PCI address set cache for later
      * use in hotplug
      */
-    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
-        VIR_DEBUG("Assigning domain PCI addresses");
-        if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0)
+    VIR_DEBUG("Assigning domain PCI addresses");
+    if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0)
             goto error;
-    }
 
     if ((timestamp = virTimeStringNow()) == NULL)
         goto error;
@@ -5689,14 +5280,6 @@  int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED,
     if (qemuProcessDetectIOThreadPIDs(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
         goto error;
 
-    /* If we have -device, then addresses are assigned explicitly.
-     * If not, then we have to detect dynamic ones here */
-    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
-        VIR_DEBUG("Determining domain device PCI addresses");
-        if (qemuProcessInitPCIAddresses(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
-            goto error;
-    }
-
     VIR_DEBUG("Getting initial memory amount");
     qemuDomainObjEnterMonitor(driver, vm);
     if (qemuMonitorGetBalloonInfo(priv->mon, &vm->def->mem.cur_balloon) < 0)