diff mbox

ARM: imx6q: build pm code only when CONFIG_PM selected

Message ID CAMPhdO9Fdi_mCCJvs+1ijUu-+cCwSeLHLy7ShSbHZGV4BsixPQ@mail.gmail.com
State Changes Requested
Headers show

Commit Message

Eric Miao Dec. 26, 2011, 1:31 p.m. UTC 
---------- Forwarded message ----------
From: Eric Miao <eric.miao@linaro.org>
Date: Wed, Dec 21, 2011 at 10:38 PM
Subject: [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected
To: linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Cc: Eric Miao <eric.miao@linaro.org>, Shawn Guo <shawn.guo@linaro.org>


Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
---
 arch/arm/mach-imx/Kconfig               |    1 +
 arch/arm/mach-imx/Makefile              |    6 +++++-
 arch/arm/mach-imx/head-v7.S             |    2 ++
 arch/arm/plat-mxc/include/mach/common.h |    8 +++++++-
 4 files changed, 15 insertions(+), 2 deletions(-)

--
1.7.5.4
diff mbox

Patch

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c44aa97..6ee6803 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -602,6 +602,7 @@  config SOC_IMX6Q
       select HAVE_IMX_GPC
       select HAVE_IMX_MMDC
       select HAVE_IMX_SRC
+       select ARM_CPU_SUSPEND if PM
       select USE_OF

       help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aba7321..7a739bb 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -70,4 +70,8 @@  AFLAGS_head-v7.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+
+ifeq ($(CONFIG_PM),y)
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+endif
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
index 6229efb..a59cae7 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/head-v7.S
@@ -71,6 +71,7 @@  ENTRY(v7_secondary_startup)
 ENDPROC(v7_secondary_startup)
 #endif

+#ifdef CONFIG_PM
 /*
 * The following code is located into the .data section.  This is to
 * allow phys_l2x0_saved_regs to be accessed with a relative load
@@ -97,3 +98,4 @@  ENDPROC(v7_cpu_resume)
       .globl  phys_l2x0_saved_regs
 phys_l2x0_saved_regs:
        .long   0
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/common.h
b/arch/arm/plat-mxc/include/mach/common.h
index c75f254..f4ebdb8 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -131,6 +131,12 @@  extern void imx53_evk_common_init(void);
 extern void imx53_qsb_common_init(void);
 extern void imx53_smd_common_init(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_pm_init(void);
 extern void imx6q_clock_map_io(void);
+
+#ifdef CONFIG_PM
+extern void imx6q_pm_init(void);
+#else
+static inline void imx6q_pm_init(void) {}
+#endif
+
 #endif