diff mbox series

[RFT,10/12] ARM: dts: qcom: msm8974: switch TCSR mutex to MMIO

Message ID 20220817131415.714340-11-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series ARM/hwlock: qcom: switch TCSR mutex to MMIO | expand

Commit Message

Krzysztof Kozlowski Aug. 17, 2022, 1:14 p.m. UTC
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'reg' is a required property
  qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 4b602410d72a..5f674aa819ae 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1228,9 +1228,10 @@  smd-edge {
 			};
 		};
 
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex";
 			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_1: syscon@fd485000 {
@@ -1719,13 +1720,6 @@  reboot-mode {
 		};
 	};
 
-	tcsr_mutex: tcsr-mutex {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_block 0 0x80>;
-
-		#hwlock-cells = <1>;
-	};
-
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;