new file mode 100644
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcm4377-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4377 family PCIe Bluetooth Chips
+
+allOf:
+ - $ref: bluetooth-controller.yaml#
+
+maintainers:
+ - Sven Peter <sven@svenpeter.dev>
+
+description:
+ This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
+ usually found in Apple machines. The Wi-Fi part of the chip is described in
+ bindings/net/wireless/brcm,bcm4329-fmac.yaml.
+
+properties:
+ compatible:
+ enum:
+ - pci14e4,5fa0 # BCM4377
+ - pci14e4,5f69 # BCM4378
+ - pci14e4,5f71 # BCM4387
+
+ reg:
+ description: PCI device identifier.
+
+ brcm,board-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Board type of the Bluetooth chip. This is used to decouple
+ the overall system board from the Bluetooth module and used to construct
+ firmware and calibration data filenames.
+ On Apple platforms, this should be the Apple module-instance codename
+ prefixed by "apple,", e.g. "apple,atlantisb".
+ pattern: '^apple,.*'
+
+ brcm,taurus-cal-blob:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: A per-device calibration blob for the Bluetooth radio. This
+ should be filled in by the bootloader from platform configuration
+ data, if necessary, and will be uploaded to the device.
+ This blob is used if the chip stepping of the Bluetooth module does not
+ support beamforming.
+
+ brcm,taurus-bf-cal-blob:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: A per-device calibration blob for the Bluetooth radio. This
+ should be filled in by the bootloader from platform configuration
+ data, if necessary, and will be uploaded to the device.
+ This blob is used if the chip stepping of the Bluetooth module supports
+ beamforming.
+
+ local-bd-address: true
+
+required:
+ - compatible
+ - reg
+ - local-bd-address
+ - brcm,board-type
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bluetooth@0,1 {
+ compatible = "pci14e4,5f69";
+ reg = <0x100 0x0 0x0 0x0 0x0>;
+ brcm,board-type = "apple,honshu";
+ /* To be filled by the bootloader */
+ local-bd-address = [00 00 00 00 00 00];
+ };
+ };
@@ -1875,6 +1875,7 @@ F: Documentation/devicetree/bindings/interrupt-controller/apple,*
F: Documentation/devicetree/bindings/iommu/apple,dart.yaml
F: Documentation/devicetree/bindings/iommu/apple,sart.yaml
F: Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
+F: Documentation/devicetree/bindings/net/brcm,bcm4377-bluetooth.yaml
F: Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
F: Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
F: Documentation/devicetree/bindings/pci/apple,pcie.yaml
These chips are combined Wi-Fi/Bluetooth radios which expose a PCI subfunction for the Bluetooth part. They are found in Apple machines such as the x86 models with the T2 chip or the arm64 models with the M1 or M2 chips. Signed-off-by: Sven Peter <sven@svenpeter.dev> --- changes from v1: - added apple,* pattern to brcm,board-type - s/PCI/PCIe/ - fixed 1st reg cell inside the example to not contain the bus number .../bindings/net/brcm,bcm4377-bluetooth.yaml | 78 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm4377-bluetooth.yaml