diff mbox series

[35/40] arm64: dts: qcom: sm6350: align TLMM pin configuration with DT schema

Message ID 20220911111200.199182-36-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [01/40] dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix matching pin config | expand

Commit Message

Krzysztof Kozlowski Sept. 11, 2022, 11:11 a.m. UTC
DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d882c29d53aa..c39de7d3ace0 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1314,49 +1314,49 @@  tlmm: pinctrl@f100000 {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
 
-			qup_uart9_default: qup-uart9-default {
+			qup_uart9_default: qup-uart9-default-state {
 				pins = "gpio25", "gpio26";
 				function = "qup13_f2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c0_default: qup-i2c0-default {
+			qup_i2c0_default: qup-i2c0-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup00";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
+			qup_i2c2_default: qup-i2c2-default-state {
 				pins = "gpio45", "gpio46";
 				function = "qup02";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
+			qup_i2c6_default: qup-i2c6-default-state {
 				pins = "gpio13", "gpio14";
 				function = "qup10";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
+			qup_i2c7_default: qup-i2c7-default-state {
 				pins = "gpio27", "gpio28";
 				function = "qup11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
+			qup_i2c8_default: qup-i2c8-default-state {
 				pins = "gpio19", "gpio20";
 				function = "qup12";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
+			qup_i2c10_default: qup-i2c10-default-state {
 				pins = "gpio4", "gpio5";
 				function = "qup14";
 				drive-strength = <2>;