diff mbox series

[v2,06/40] dt-bindings: pinctrl: qcom,sm6125-pinctrl: extend example

Message ID 20220912061746.6311-7-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings | expand

Commit Message

Krzysztof Kozlowski Sept. 12, 2022, 6:17 a.m. UTC
Extend example with children for pin configuration and indent it with
4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 46 +++++++++++++------
 1 file changed, 33 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
index 735eb5d6834d..5cb8b272cb7d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -126,17 +126,37 @@  $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@500000 {
-                compatible = "qcom,sm6125-tlmm";
-                reg = <0x00500000 0x400000>,
-                    <0x00900000 0x400000>,
-                    <0x00d00000 0x400000>;
-                reg-names = "west", "south", "east";
-                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                gpio-ranges = <&tlmm 0 0 134>;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6125-tlmm";
+        reg = <0x00500000 0x400000>,
+              <0x00900000 0x400000>,
+              <0x00d00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 134>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        sdc2-off-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
         };
+    };