diff mbox series

[v3,02/14] ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1

Message ID 20220913142205.162399-3-sergiu.moga@microchip.com
State Accepted
Commit 7fca501460f6a6e97e15176eb6a648d02c90800c
Headers show
Series Make atmel serial driver aware of GCLK | expand

Commit Message

Sergiu Moga Sept. 13, 2022, 2:21 p.m. UTC
Maintain consistency among the compatibles of the serial nodes of
sam9x60ek and highlight the incremental characteristic of its serial
IP's by making sure that all serial nodes contain both the sam9x60
and sam9260 usart/dbgu compatibles.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
---


v1 -> v2:
- Nothing, this patch was not here before


v2 -> v3:
- Nothing, previously this was [PATCH 4]



 arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Claudiu Beznea Sept. 16, 2022, 8:14 a.m. UTC | #1
On 13.09.2022 17:21, Sergiu Moga wrote:
> Maintain consistency among the compatibles of the serial nodes of
> sam9x60ek and highlight the incremental characteristic of its serial
> IP's by making sure that all serial nodes contain both the sam9x60
> and sam9260 usart/dbgu compatibles.
> 
> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>

Applied to at91-dt, thanks!

> ---
> 
> 
> v1 -> v2:
> - Nothing, this patch was not here before
> 
> 
> v2 -> v3:
> - Nothing, previously this was [PATCH 4]
> 
> 
> 
>  arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index 7ade9979e1c6..67bce8d60908 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -258,7 +258,7 @@ &flx5 {
>  	status = "okay";
>  
>  	uart1: serial@200 {
> -		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +		compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
>  		reg = <0x200 0x200>;
>  		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>  		dmas = <&dma0
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 7ade9979e1c6..67bce8d60908 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -258,7 +258,7 @@  &flx5 {
 	status = "okay";
 
 	uart1: serial@200 {
-		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+		compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 		reg = <0x200 0x200>;
 		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
 		dmas = <&dma0